At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation.  Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve.  To mainline
kernel, they just aren't worth keeping around.

This patch kills the following clone and exec related tracehooks.

	tracehook_prepare_clone()
	tracehook_finish_clone()
	tracehook_report_clone()
	tracehook_report_clone_complete()
	tracehook_unsafe_exec()

The changes are mostly trivial - logic is moved to the caller and
comments are merged and adjusted appropriately.

The only exception is in check_unsafe_exec() where LSM_UNSAFE_PTRACE*
are OR'd to bprm->unsafe instead of setting it, which produces the
same result as the field is always zero on entry.  It also tests
p->ptrace instead of (p->ptrace & PT_PTRACED) for consistency, which
also gives the same result.

This doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation.  Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve.  To mainline
kernel, they just aren't worth keeping around.

This patch kills the following trivial tracehooks.

* Ones testing whether task is ptraced.  Replace with ->ptrace test.

	tracehook_expect_breakpoints()
	tracehook_consider_ignored_signal()
	tracehook_consider_fatal_signal()

* ptrace_event() wrappers.  Call directly.

	tracehook_report_exec()
	tracehook_report_exit()
	tracehook_report_vfork_done()

* ptrace_release_task() wrapper.  Call directly.

	tracehook_finish_release_task()

* noop

	tracehook_prepare_release_task()
	tracehook_report_death()

This doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

Move SIGTRAP on exec(2) logic from tracehook_report_exec() to
ptrace_event().  This is part of changes to make ptrace_event()
smarter and handle ptrace event related details in one place.

This doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

This patch implements ptrace_event_enabled() which tests whether a
given PTRACE_EVENT_* is enabled and use it to simplify ptrace_event()
and tracehook_prepare_clone().

PT_EVENT_FLAG() macro is added which calculates PT_TRACE_* flag from
PTRACE_EVENT_*.  This is used to define PT_TRACE_* flags and by
ptrace_event_enabled() to find the matching flag.

This is used to make ptrace_event() and tracehook_prepare_clone()
simpler.

* ptrace_event() callers were responsible for providing mask to test
  whether the event was enabled.  This patch implements
  ptrace_event_enabled() and make ptrace_event() drop @mask and
  determine whether the event is enabled from @event.  Note that
  @event is constant and this conversion doesn't add runtime overhead.

  All conversions except tracehook_report_clone_complete() are
  trivial.  tracehook_report_clone_complete() used to use 0 for @mask
  (always enabled) but now tests whether the specified event is
  enabled.  This doesn't cause any behavior difference as it's
  guaranteed that the event specified by @trace is enabled.

* tracehook_prepare_clone() now only determines which event is
  applicable and use ptrace_event_enabled() for enable test.

This doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

task_ptrace(task) simply dereferences task->ptrace and isn't even used
consistently only adding confusion.  Kill it and directly access
->ptrace instead.

This doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

The previous patch implemented async notification for ptrace but it
only worked while trace is running.  This patch introduces
PTRACE_LISTEN which is suggested by Oleg Nestrov.

It's allowed iff tracee is in STOP trap and puts tracee into
quasi-running state - tracee never really runs but wait(2) and
ptrace(2) consider it to be running.  While ptracer is listening,
tracee is allowed to re-enter STOP to notify an async event.
Listening state is cleared on the first notification.  Ptracer can
also clear it by issuing INTERRUPT - tracee will re-trap into STOP
with listening state cleared.

This allows ptracer to monitor group stop state without running tracee
- use INTERRUPT to put tracee into STOP trap, issue LISTEN and then
wait(2) to wait for the next group stop event.  When it happens,
PTRACE_GETSIGINFO provides information to determine the current state.

Test program follows.

  #define PTRACE_SEIZE		0x4206
  #define PTRACE_INTERRUPT	0x4207
  #define PTRACE_LISTEN		0x4208

  #define PTRACE_SEIZE_DEVEL	0x80000000

  static const struct timespec ts1s = { .tv_sec = 1 };

  int main(int argc, char **argv)
  {
	  pid_t tracee, tracer;
	  int i;

	  tracee = fork();
	  if (!tracee)
		  while (1)
			  pause();

	  tracer = fork();
	  if (!tracer) {
		  siginfo_t si;

		  ptrace(PTRACE_SEIZE, tracee, NULL,
			 (void *)(unsigned long)PTRACE_SEIZE_DEVEL);
		  ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL);
	  repeat:
		  waitid(P_PID, tracee, NULL, WSTOPPED);

		  ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si);
		  if (!si.si_code) {
			  printf("tracer: SIG %d\n", si.si_signo);
			  ptrace(PTRACE_CONT, tracee, NULL,
				 (void *)(unsigned long)si.si_signo);
			  goto repeat;
		  }
		  printf("tracer: stopped=%d signo=%d\n",
			 si.si_signo != SIGTRAP, si.si_signo);
		  if (si.si_signo != SIGTRAP)
			  ptrace(PTRACE_LISTEN, tracee, NULL, NULL);
		  else
			  ptrace(PTRACE_CONT, tracee, NULL, NULL);
		  goto repeat;
	  }

	  for (i = 0; i < 3; i++) {
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGSTOP\n");
		  kill(tracee, SIGSTOP);
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGCONT\n");
		  kill(tracee, SIGCONT);
	  }
	  nanosleep(&ts1s, NULL);

	  kill(tracer, SIGKILL);
	  kill(tracee, SIGKILL);
	  return 0;
  }

This is identical to the program to test TRAP_NOTIFY except that
tracee is PTRACE_LISTEN'd instead of PTRACE_CONT'd when group stopped.
This allows ptracer to monitor when group stop ends without running
tracee.

  # ./test-listen
  tracer: stopped=0 signo=5
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18

-v2: Moved JOBCTL_LISTENING check in wait_task_stopped() into
     task_stopped_code() as suggested by Oleg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>

Currently there's no way for ptracer to find out whether group stop
finished other than polling with INTERRUPT - GETSIGINFO - CONT
sequence.  This patch implements group stop notification for ptracer
using STOP traps.

When group stop state of a seized tracee changes, JOBCTL_TRAP_NOTIFY
is set, which schedules a STOP trap which is sticky - it isn't cleared
by other traps and at least one STOP trap will happen eventually.
STOP trap is synchronization point for event notification and the
tracer can determine the current group stop state by looking at the
signal number portion of exit code (si_status from waitid(2) or
si_code from PTRACE_GETSIGINFO).

Notifications are generated both on start and end of group stops but,
because group stop participation always happens before STOP trap, this
doesn't cause an extra trap while tracee is participating in group
stop.  The symmetry will be useful later.

Note that this notification works iff tracee is not trapped.
Currently there is no way to be notified of group stop state changes
while tracee is trapped.  This will be addressed by a later patch.

An example program follows.

  #define PTRACE_SEIZE		0x4206
  #define PTRACE_INTERRUPT	0x4207

  #define PTRACE_SEIZE_DEVEL	0x80000000

  static const struct timespec ts1s = { .tv_sec = 1 };

  int main(int argc, char **argv)
  {
	  pid_t tracee, tracer;
	  int i;

	  tracee = fork();
	  if (!tracee)
		  while (1)
			  pause();

	  tracer = fork();
	  if (!tracer) {
		  siginfo_t si;

		  ptrace(PTRACE_SEIZE, tracee, NULL,
			 (void *)(unsigned long)PTRACE_SEIZE_DEVEL);
		  ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL);
	  repeat:
		  waitid(P_PID, tracee, NULL, WSTOPPED);

		  ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si);
		  if (!si.si_code) {
			  printf("tracer: SIG %d\n", si.si_signo);
			  ptrace(PTRACE_CONT, tracee, NULL,
				 (void *)(unsigned long)si.si_signo);
			  goto repeat;
		  }
		  printf("tracer: stopped=%d signo=%d\n",
			 si.si_signo != SIGTRAP, si.si_signo);
		  ptrace(PTRACE_CONT, tracee, NULL, NULL);
		  goto repeat;
	  }

	  for (i = 0; i < 3; i++) {
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGSTOP\n");
		  kill(tracee, SIGSTOP);
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGCONT\n");
		  kill(tracee, SIGCONT);
	  }
	  nanosleep(&ts1s, NULL);

	  kill(tracer, SIGKILL);
	  kill(tracee, SIGKILL);
	  return 0;
  }

In the above program, tracer keeps tracee running and gets
notification of each group stop state changes.

  # ./test-notify
  tracer: stopped=0 signo=5
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>

Currently, there's no way to trap a running ptracee short of sending a
signal which has various side effects.  This patch implements
PTRACE_INTERRUPT which traps ptracee without any signal or job control
related side effect.

The implementation is almost trivial.  It uses the group stop trap -
SIGTRAP | PTRACE_EVENT_STOP << 8.  A new trap flag
JOBCTL_TRAP_INTERRUPT is added, which is set on PTRACE_INTERRUPT and
cleared when any trap happens.  As INTERRUPT should be useable
regardless of the current state of tracee, task_is_traced() test in
ptrace_check_attach() is skipped for INTERRUPT.

PTRACE_INTERRUPT is available iff tracee is attached with
PTRACE_SEIZE.

Test program follows.

  #define PTRACE_SEIZE		0x4206
  #define PTRACE_INTERRUPT	0x4207

  #define PTRACE_SEIZE_DEVEL	0x80000000

  static const struct timespec ts100ms = { .tv_nsec = 100000000 };
  static const struct timespec ts1s = { .tv_sec = 1 };
  static const struct timespec ts3s = { .tv_sec = 3 };

  int main(int argc, char **argv)
  {
	  pid_t tracee;

	  tracee = fork();
	  if (tracee == 0) {
		  nanosleep(&ts100ms, NULL);
		  while (1) {
			  printf("tracee: alive pid=%d\n", getpid());
			  nanosleep(&ts1s, NULL);
		  }
	  }

	  if (argc > 1)
		  kill(tracee, SIGSTOP);

	  nanosleep(&ts100ms, NULL);

	  ptrace(PTRACE_SEIZE, tracee, NULL,
		 (void *)(unsigned long)PTRACE_SEIZE_DEVEL);
	  if (argc > 1) {
		  waitid(P_PID, tracee, NULL, WSTOPPED);
		  ptrace(PTRACE_CONT, tracee, NULL, NULL);
	  }
	  nanosleep(&ts3s, NULL);

	  printf("tracer: INTERRUPT and DETACH\n");
	  ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL);
	  waitid(P_PID, tracee, NULL, WSTOPPED);
	  ptrace(PTRACE_DETACH, tracee, NULL, NULL);
	  nanosleep(&ts3s, NULL);

	  printf("tracer: exiting\n");
	  kill(tracee, SIGKILL);
	  return 0;
  }

When called without argument, tracee is seized from running state,
interrupted and then detached back to running state.

  # ./test-interrupt
  tracee: alive pid=4546
  tracee: alive pid=4546
  tracee: alive pid=4546
  tracer: INTERRUPT and DETACH
  tracee: alive pid=4546
  tracee: alive pid=4546
  tracee: alive pid=4546
  tracer: exiting

When called with argument, tracee is seized from stopped state,
continued, interrupted and then detached back to stopped state.

  # ./test-interrupt  1
  tracee: alive pid=4548
  tracee: alive pid=4548
  tracee: alive pid=4548
  tracer: INTERRUPT and DETACH
  tracer: exiting

Before PTRACE_INTERRUPT, once the tracee was running, there was no way
to trap tracee and do PTRACE_DETACH without causing side effect.

-v2: Updated to use task_set_jobctl_pending() so that it doesn't end
     up scheduling TRAP_STOP if child is dying which may make the
     child unkillable.  Spotted by Oleg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>

PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side
effects on tracee signal and job control states.  This patch
implements a new ptrace request PTRACE_SEIZE which attaches a tracee
without trapping it or affecting its signal and job control states.

The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_*
flags in @data.  Currently, the only defined flag is
PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE.
PTRACE_SEIZE will change ptrace behaviors outside of attach itself.
The changes will be implemented gradually and the DEVEL flag is to
prevent programs which expect full SEIZE behavior from using it before
all the behavior modifications are complete while allowing unit
testing.  The flag will be removed once SEIZE behaviors are completely
implemented.

* PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap.  After
  attaching tracee continues to run unless a trap condition occurs.

* PTRACE_SEIZE doesn't affect signal or group stop state.

* If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses
  exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of
  the stopping signals if group stop is in effect or SIGTRAP
  otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO
  instead of NULL.

Seizing sets PT_SEIZED in ->ptrace of the tracee.  This flag will be
used to determine whether new SEIZE behaviors should be enabled.

Test program follows.

  #define PTRACE_SEIZE		0x4206
  #define PTRACE_SEIZE_DEVEL	0x80000000

  static const struct timespec ts100ms = { .tv_nsec = 100000000 };
  static const struct timespec ts1s = { .tv_sec = 1 };
  static const struct timespec ts3s = { .tv_sec = 3 };

  int main(int argc, char **argv)
  {
	  pid_t tracee;

	  tracee = fork();
	  if (tracee == 0) {
		  nanosleep(&ts100ms, NULL);
		  while (1) {
			  printf("tracee: alive\n");
			  nanosleep(&ts1s, NULL);
		  }
	  }

	  if (argc > 1)
		  kill(tracee, SIGSTOP);

	  nanosleep(&ts100ms, NULL);

	  ptrace(PTRACE_SEIZE, tracee, NULL,
		 (void *)(unsigned long)PTRACE_SEIZE_DEVEL);
	  if (argc > 1) {
		  waitid(P_PID, tracee, NULL, WSTOPPED);
		  ptrace(PTRACE_CONT, tracee, NULL, NULL);
	  }
	  nanosleep(&ts3s, NULL);
	  printf("tracer: exiting\n");
	  return 0;
  }

When the above program is called w/o argument, tracee is seized while
running and remains running.  When tracer exits, tracee continues to
run and print out messages.

  # ./test-seize-simple
  tracee: alive
  tracee: alive
  tracee: alive
  tracer: exiting
  tracee: alive
  tracee: alive

When called with an argument, tracee is seized from stopped state and
continued, and returns to stopped state when tracer exits.

  # ./test-seize
  tracee: alive
  tracee: alive
  tracee: alive
  tracer: exiting
  # ps -el|grep test-seize
  1 T     0  4720     1  0  80   0 -   941 signal ttyS0    00:00:00 test-seize

-v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan
     suggested.

-v3: PTRACE_EVENT_STOP traps now report group stop state by signr.  If
     group stop is in effect the stop signal number is returned as
     part of exit_code; otherwise, SIGTRAP.  This was suggested by
     Denys and Oleg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>

do_signal_stop() implemented both normal group stop and trap for group
stop while ptraced.  This approach has been enough but scheduled
changes require trap mechanism which can be used in more generic
manner and using group stop trap for generic trap site simplifies both
userland visible interface and implementation.

This patch adds a new jobctl flag - JOBCTL_TRAP_STOP.  When set, it
triggers a trap site, which behaves like group stop trap, in
get_signal_to_deliver() after checking for pending signals.  While
ptraced, do_signal_stop() doesn't stop itself.  It initiates group
stop if requested and schedules JOBCTL_TRAP_STOP and returns.  The
caller - get_signal_to_deliver() - is responsible for checking whether
TRAP_STOP is pending afterwards and handling it.

ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of
JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap
bits and TRAPPING so that TRAP_STOP and future trap bits don't linger
after detach.

While at it, add proper function comment to do_signal_stop() and make
it return bool.

-v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING
     instead of JOBCTL_PENDING_MASK.  This avoids accidentally
     clearing JOBCTL_STOP_CONSUME.  Spotted by Oleg.

-v3: do_signal_stop() updated to return %false without dropping
     siglock while ptraced and TRAP_STOP check moved inside for(;;)
     loop after group stop participation.  This avoids unnecessary
     relocking and also will help avoiding unnecessary traps by
     consuming group stop before handling pending traps.

-v4: Jobctl trap handling moved into a separate function -
     do_jobctl_trap().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>

Remove the following three noop tracehooks in signals.c.

* tracehook_force_sigpending()
* tracehook_get_signal()
* tracehook_finish_jctl()

The code area is about to be updated and these hooks don't do anything
other than obfuscating the logic.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

ptracer->signal->wait_chldexit was used to wait for TRAPPING; however,
->wait_chldexit was already complicated with waker-side filtering
without adding TRAPPING wait on top of it.  Also, it unnecessarily
made TRAPPING clearing depend on the current ptrace relationship - if
the ptracee is detached, wakeup is lost.

There is no reason to use signal->wait_chldexit here.  We're just
waiting for JOBCTL_TRAPPING bit to clear and given the relatively
infrequent use of ptrace, bit_waitqueue can serve it perfectly.

This patch makes JOBCTL_TRAPPING wait use bit_waitqueue instead of
signal->wait_chldexit.

-v2: Use JOBCTL_*_BIT macros instead of ilog2() as suggested by Linus.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

task->jobctl currently hosts JOBCTL_STOP_PENDING and will host TRAP
pending bits too.  Setting pending conditions on a dying task may make
the task unkillable.  Currently, each setting site is responsible for
checking for the condition but with to-be-added job control traps this
becomes too fragile.

This patch adds task_set_jobctl_pending() which should be used when
setting task->jobctl bits to schedule a stop or trap.  The function
performs the followings to ease setting pending bits.

* Sanity checks.

* If fatal signal is pending or PF_EXITING is set, no bit is set.

* STOP_SIGMASK is automatically cleared if new value is being set.

do_signal_stop() and ptrace_attach() are updated to use
task_set_jobctl_pending() instead of setting STOP_PENDING explicitly.
The surrounding structures around setting are changed to fit
task_set_jobctl_pending() better but there should be no userland
visible behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

JOBCTL_TRAPPING indicates that ptracer is waiting for tracee to
(re)transit into TRACED.  task_clear_jobctl_pending() must be called
when either tracee enters TRACED or the transition is cancelled for
some reason.  The former is achieved by explicitly calling
task_clear_jobctl_pending() in ptrace_stop() and the latter by calling
it at the end of do_signal_stop().

Calling task_clear_jobctl_trapping() at the end of do_signal_stop()
limits the scope TRAPPING can be used and is fragile in that seemingly
unrelated changes to tracee's control flow can lead to stuck TRAPPING.

We already have task_clear_jobctl_pending() calls on those cancelling
events to clear JOBCTL_STOP_PENDING.  Cancellations can be handled by
making those call sites use JOBCTL_PENDING_MASK instead and updating
task_clear_jobctl_pending() such that task_clear_jobctl_trapping() is
called automatically if no stop/trap is pending.

This patch makes the above changes and removes the fallback
task_clear_jobctl_trapping() call from do_signal_stop().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

This patch introduces JOBCTL_PENDING_MASK and replaces
task_clear_jobctl_stop_pending() with task_clear_jobctl_pending()
which takes an extra @mask argument.

JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but
future patches will add more bits.  recalc_sigpending_tsk() is updated
to use JOBCTL_PENDING_MASK instead.

task_clear_jobctl_pending() takes @mask which in subset of
JOBCTL_PENDING_MASK and clears the relevant jobctl bits.  If
JOBCTL_STOP_PENDING is set, other STOP bits are cleared together.  All
task_clear_jobctl_stop_pending() users are updated to call
task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is
functionally identical to task_clear_jobctl_stop_pending().

This patch doesn't cause any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

In ptrace_stop(), after arch hook is done, the task state and jobctl
bits are updated while holding siglock.  The ordering requirement
there is that TASK_TRACED is set before JOBCTL_TRAPPING is cleared to
prevent ptracer waiting on TRAPPING doesn't end up waking up TRACED is
actually set and sees TASK_RUNNING in wait(2).

Move set_current_state(TASK_TRACED) to the top of the block and
reorganize comments.  This makes the ordering more obvious
(TASK_TRACED before other updates) and helps future updates to group
stop participation.

This patch doesn't cause any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

PTRACE_INTERRUPT is going to be added which should also skip
task_is_traced() check in ptrace_check_attach().  Rename @kill to
@ignore_state and make it bool.  Add function comment while at it.

This patch doesn't introduce any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

signal->group_stop currently hosts mostly group stop related flags;
however, it's gonna be used for wider purposes and the GROUP_STOP_
flag prefix becomes confusing.  Rename signal->group_stop to
signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*.

Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are
defined in terms of them to allow using bitops later.

While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate
future additions.

This doesn't cause any functional change.

-v2: JOBCTL_*_BIT macros added as suggested by Linus.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

Remove local variable wait_trap which determines whether to wait for
!TRAPPING or not and simply wait for it if attach was successful.

-v2: Oleg pointed out wait should happen iff attach was successful.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] Fix oops caused by queue refcounting failure

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits)
  tg3: Fix tg3_skb_error_unmap()
  net: tracepoint of net_dev_xmit sees freed skb and causes panic
  drivers/net/can/flexcan.c: add missing clk_put
  net: dm9000: Get the chip in a known good state before enabling interrupts
  drivers/net/davinci_emac.c: add missing clk_put
  af-packet: Add flag to distinguish VID 0 from no-vlan.
  caif: Fix race when conditionally taking rtnl lock
  usbnet/cdc_ncm: add missing .reset_resume hook
  vlan: fix typo in vlan_dev_hard_start_xmit()
  net/ipv4: Check for mistakenly passed in non-IPv4 address
  iwl4965: correctly validate temperature value
  bluetooth l2cap: fix locking in l2cap_global_chan_by_psm
  ath9k: fix two more bugs in tx power
  cfg80211: don't drop p2p probe responses
  Revert "net: fix section mismatches"
  drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run()
  sctp: stop pending timers and purge queues when peer restart asoc
  drivers/net: ks8842 Fix crash on received packet when in PIO mode.
  ip_options_compile: properly handle unaligned pointer
  iwlagn: fix incorrect PCI subsystem id for 6150 devices
  ...

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Use hlist_entry() for io_context.cic_list.first
  cfq-iosched: Remove bogus check in queue_fail path
  xen/blkback: potential null dereference in error handling
  xen/blkback: don't call vbd_size() if bd_disk is NULL
  block: blkdev_get() should access ->bd_disk only after success
  CFQ: Fix typo and remove unnecessary semicolon
  block: remove unwanted semicolons
  Revert "block: Remove extra discard_alignment from hd_struct."
  nbd: adjust 'max_part' according to part_shift
  nbd: limit module parameters to a sane value
  nbd: pass MSG_* flags to kernel_recvmsg()
  block: improve the bio_add_page() and bio_add_pc_page() descriptions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: strncpy: fix handling of zero lengths

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  asm-generic/unistd.h: support sendmmsg syscall
  tile: enable CONFIG_BUGVERBOSE

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix-up free space earlier
  UBIFS: intialize LPT earlier
  UBIFS: assert no fixup when writing a node
  UBIFS: fix clean znode counter corruption in error cases
  UBIFS: fix memory leak on error path
  UBIFS: fix shrinker object count reports
  UBIFS: fix recovery broken by the previous recovery fix
  UBIFS: amend ubifs_recover_leb interface
  UBIFS: introduce a "grouped" journal head flag
  UBIFS: supress false error messages

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest:
  ktest: Ignore unset values of the minconfig in config_bisect
  ktest: Fix result of rebooting the kernel
  ktest: Fix off-by-one in config bisect result

Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: add DMAC clock definitions on SH7372
  ARM: arch-shmobile: support SDHI card detection on mackerel, using a GPIO
  sh_mobile_meram: MERAM platform data for LCDC

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  dmaengine: shdma: fix a regression: initialise DMA channels for memcpy
  dmaengine: shdma: Fix up fallout from runtime PM changes.
  Revert "clocksource: sh_cmt: Runtime PM support"
  Revert "clocksource: sh_tmu: Runtime PM support"
  sh: Fix up asm-generic/ptrace.h fallout.
  sh64: Move from P1SEG to CAC_ADDR for consistent sync.
  sh64: asm/pgtable.h needs asm/mmu.h
  sh: asm/tlb.h needs linux/swap.h
  sh: mark DMA slave ID 0 as invalid
  sh: Update shmin to reflect PIO dependency.
  sh: arch/sh/kernel/process_32.c needs linux/prefetch.h.
  sh: add MMCIF runtime PM support on ecovec
  sh: switch ap325rxa to dynamically manage the platform camera

This reverts commit ed0bd233.

Since we reverted the TTY API change, we should revert the ASoC update
to it too.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit b1c43f82.

It was broken in so many ways, and results in random odd pty issues.

It re-introduced the buggy schedule_work() in flush_to_ldisc() that can
cause endless work-loops (see commit a5660b41: "tty: fix endless
work loop when the buffer fills up").

It also used an "unsigned int" return value fo the ->receive_buf()
function, but then made multiple functions return a negative error code,
and didn't actually check for the error in the caller.

And it didn't actually work at all.  BenH bisected down odd tty behavior
to it:
  "It looks like the patch is causing some major malfunctions of the X
   server for me, possibly related to PTYs.  For example, cat'ing a
   large file in a gnome terminal hangs the kernel for -minutes- in a
   loop of what looks like flush_to_ldisc/workqueue code, (some ftrace
   data in the quoted bits further down).

   ...

   Some more data: It -looks- like what happens is that the
   flush_to_ldisc work queue entry constantly re-queues itself (because
   the PTY is full ?) and the workqueue thread will basically loop
   forver calling it without ever scheduling, thus starving the consumer
   process that could have emptied the PTY."

which is pretty much exactly the problem we fixed in a5660b41.

Milton Miller pointed out the 'unsigned int' issue.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: Milton Miller <miltonm@bga.com>
Cc: Stefan Bigler <stefan.bigler@keymile.com>
Cc: Toby Gray <toby.gray@realvnc.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem

The free space fixup is currently initiated during mount after the call to
ubifs_write_master() which results in a write to PEBs; this has been observed
with the patch 'assert no fixup when writing a node' applied:

Move the free space fixup on mount to before the calls to
ubifs_recover_inl_heads() and ubifs_write_master(). This results in no
assertions with the previously mentioned patch applied.

Artem: tweaked the patch a bit
Signed-off-by: Ben Gardiner <bengardiner@nanometrics>
Reviewed-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

The current 'mount_ubifs()' implementation does not initialize the LPT until the
the master node is marked dirty. Move the LPT initialization to before marking
the master node dirty. This is a preparation for the next patch which will move
the free-space-fixup check to before marking the master node dirty, because we
have to fix-up the free space before doing any writes.

Artem: massaged the patch and commit message.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

The current free space fixup can result in some writing to the UBI volume
when the space_fixup flag is set.

To catch instances where UBIFS is writing to the NAND while the space_fixup
flag is set, add an assert to ubifs_write_node().

Artem: tweaked the patch, added similar assertion to the write buffer
       write path.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

UBIFS maintains per-filesystem and global clean znode counters
('c->clean_zn_cnt' and 'ubifs_clean_zn_cnt'). It is important to maintain
correct values there since the shrinker relies on 'ubifs_clean_zn_cnt'.

However, in case of failures during commit the counters were corrupted. E.g.,
if a failure happens in the middle of 'write_index()', then some nodes in the
commit list ('c->cnext') are marked as clean, and some are marked as dirty. And
the 'ubifs_destroy_tnc_subtree()' frees does not retrun correct count, and we
end up with non-zero 'c->clean_zn_cnt' when unmounting. This means that if we
have 2 file-sytem and one of them fails, and we unmount it,
'ubifs_clean_zn_cnt' stays incorrect and confuses the shrinker.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

UBIFS leaks memory on error path in 'ubifs_jnl_update()' in case of write
failure because it forgets to free the 'struct ubifs_dent_node *dent' object.
Although the object is small, the alignment can make it large - e.g., 2KiB
if the min. I/O unit is 2KiB.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable@kernel.org

Sometimes VM asks the shrinker to return amount of objects it can shrink,
and we return the ubifs_clean_zn_cnt in that case. However, it is possible
that this counter is negative for a short period of time, due to the way
UBIFS TNC code updates it. And I can observe the following warnings sometimes:

shrink_slab: ubifs_shrinker+0x0/0x2b7 [ubifs] negative objects to delete nr=-8541616642706119788

This patch makes sure UBIFS never returns negative count of objects.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable@kernel.org

The jump to 4f will cause the NUL padding loop to run at least one time,
so if string length is zero just jump to the end.  Otherwise we wrongly
write one NUL byte when size==0.
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

This function attempts to free one fragment beyond the number of
fragments that were actually mapped.  This patch brings back the limit
to the correct spot.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Because there is a possibility that skb is kfree_skb()ed and zero cleared
after ndo_start_xmit, we should not see the contents of skb like skb->len and
skb->dev->name after ndo_start_xmit. But trace_net_dev_xmit does that
and causes panic by NULL pointer dereference.
This patch fixes trace_net_dev_xmit not to see the contents of skb directly.

If you want to reproduce this panic,

1. Get tracepoint of net_dev_xmit on
2. Create 2 guests on KVM
2. Make 2 guests use virtio_net
4. Execute netperf from one to another for a long time as a network burden
5. host will panic(It takes about 30 minutes)
Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>