- 12 Apr, 2012 39 commits
-
-
Samuel Ortiz authored
At KERN_DEBUG level. Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Eric Lapuyade authored
Some HW/drivers get notifications when a tag moves out of the radio field. This notification is now forwarded to user space through netlink. Signed-off-by:
Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by:
-
Eric Lapuyade authored
Signed-off-by:
-
Eric Lapuyade authored
Signed-off-by:
-
Samuel Ortiz authored
The target index can be used by userspace to uniquely identify a target and thus should be kept unique, per NFC adapter. Moreover, some protocols do not provide a logical index when discovering new targets, so we have to generate one for them. For NCI or pn533 to fetch their logical index, we added a logical_idx field to the target structure. Signed-off-by:
-
Eric Lapuyade authored
Signed-off-by:
-
Eric Lapuyade authored
Most NFC HCI chipsets actually use a simplified HDLC link layer to carry HCI payloads. This implementation registers itself as an HCI device on behalf of the NFC driver. Signed-off-by:
-
Eric Lapuyade authored
This is an implementation of ETSI TS 102 622 specification. Many NFC chipsets use HCI as the host <-> target protocol on top of a serial link like i2c. Signed-off-by:
-
Eric Lapuyade authored
NFC drivers will call this routine when they detect that a tag leaves the RF field. This will eventually lead to the corresponding netlink event to be sent. Signed-off-by:
-
Samuel Ortiz authored
Some chips are capable of detecting when a tag is out of the field, so they could send a netlink event about it to userspace. Signed-off-by:
-
Zefir Kurtisi authored
Clean up some orphaned code lines containing * unused variables (not referenced / write-only) * non-implemented function prototypes Signed-off-by:
Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by:
-
Chun-Yeow Yeoh authored
Record the RANN sender's address only for RANNs that meet the acceptance criteria (per sections 13.10.12.4.2). Signed-off-by:
Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Reviewed-by:
Javier Cardona <javier@cozybit.com> Signed-off-by:
-
Amitkumar Karwar authored
Make use of request_firmware_nowait instead of request_firmware to load FW asynchronously. This fixes timeouts introduced with recent udev changes. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Avinash Patil authored
This patches enables setting association request and probe request IE for station interface. WPS exchange between WPS2.0 AP and mwifiex STA Enrollee/External Registrar completes successfully. Tested with wpa_supplicant 1.0 and 2.0 devel. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
Use "priv->country_code" string to display country information in debugfs command "info" instead of "adapter->region_code". "adapter->region_code" contains default region code got from FW while initialization, whereas "priv->country_code" is updated in reg_notifier handler whenever there is a change in regulatory domain. Signed-off-by:
-
Amitkumar Karwar authored
Driver gets region code from FW during initialisation. This patch makes use of it for settting default regulatory domain using regulatory_hint() API. Signed-off-by:
-
Bing Zhao authored
This is a copy-n-paste error introduced in recent patch "mwifiex: add set_cqm_rssi_config handler support". Signed-off-by:
-
Johannes Berg authored
This will later be used to dynamically bind the configuration data for DVM and MVM. For now, we can use it to get rid of the additional_nic_config() hook. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Johannes Berg authored
The iwl-shared.h header file will be going away soon. There isn't much left in it that we keep, other than the device configuration declarations. Move those out now to a new iwl-config.h header. iwl-cfg.h seemed like a possible alternative but those declarations will later live in the PCIe transport code. Signed-off-by:
-
Johannes Berg authored
The whole code around eeprom is distributed across whole bunch of different files, most of which belong to the to-be-DVM code. As a result, it is currently very hard to split out the EEPROM code to be generic. However, it is also quite unlikely that the current EEPROM code will be needed by the MVM code as that has different mechanisms to query the EEPROM (it does so through the uCode.) So, at least temporarily, move everything into priv. If it becomes necessary to use the code from MVM, we will have to split it out, but then it's also easier since we'll know what pieces we need. Signed-off-by:
-
Johannes Berg authored
Split the force_reset debugfs file into two different files: * "rf_reset" triggers a reset of the RF when written to and exposes statistics on RF resets when read * fw_restart triggers a firmware restart when written to and lives in the transport This cleans up all sources of firmware restart to originate within the transport layer and allows us to simplify some code. Signed-off-by:
-
Johannes Berg authored
This defaults to false, and we don't recommend to use it anywhere, so just remove it. Signed-off-by:
-
Johannes Berg authored
The hw_params are mostly values that are derived from the actual hardware config. As such, while it is possible that MVM will require similar ones, it makes more sense -- at least for now -- to put them into the DVM struct. Signed-off-by:
-
Johannes Berg authored
This removes one of the two sources of device restarts in the upper layer -- those are a bit inconvenient because normal restarts originate in the transport. By moving the watchdog down it can be treated the same. Also rewrite the watchdog logic. Timers are much more efficient when they never fire, so instead firing a timer every 500ms set up a timer for each TX queue and fire it only when the queue is really stuck. This avoids the CPU waking up when everything is working well. While at it, remove the wd_disable config item and replace it by simply setting wd_timeout to IWL_WATCHHDOG_DISABLED (0). Signed-off-by:
-
Johannes Berg authored
Signed-off-by:
-
Johannes Berg authored
This file isn't really all that useful as when the watchdog triggered it's already too late, and the setting doesn't persist unlike e.g. a module parameter that could be added to the right config file. Signed-off-by:
-
Johannes Berg authored
That way it isn't needed in hw_params, which is shared data. It also isn't really what we should configure in the transport, that is better just 4k/8k, so configure a bool and derive the page order in the transport. This also means the transport doesn't need access to the module parameter any more. Signed-off-by:
-
Jesper Juhl authored
The release_firmware() function does its own NULL test so a test before calling it is rather redundant. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Jesper Juhl authored
It is redundant to test for NULL pointers before calling release_firmware() since the function does its own NULL test. Signed-off-by:
-
Jesper Juhl authored
Since release_firmware() does its own test for NULL it is redundant to do so before calling it. Signed-off-by:
-
Jesper Juhl authored
release_firmware() tests for, and deals gracefully with, NULL pointers. Remove redundant explicit tests before calling the function. Signed-off-by:
-
Jesper Juhl authored
The release_firmware() function does its own NULL test, so testing before calling it is rather redundant. Signed-off-by:
-
Jesper Juhl authored
release_firmware() does its own test. Explicitly checking before the call is redundant. Signed-off-by:
-
Jesper Juhl authored
The release_firmware() function deals gracefully with being passed a NULL pointer, so explicit tests before the call are rather pointless. Signed-off-by:
-
Forest Bond authored
The chip version constant (0xCC33) was taken from version 0001.0105.2011 of the GPL vendor driver. Note that this driver version also ships a firmware update, but I am unsure if it is required for E-CUT chips to function properly. A nearby spelling error was also corrected. Signed-off-by:
Forest Bond <forest.bond@rapidrollout.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Forest Bond authored
The previous definitions included both {B,C,D,E}_CUT_VERSION and CHIP_92D_{C,D}_CUT with conflicting values for the C and D cut versions, and literal hex values were used in the IS_92D_{C,D,E}_CUT macros. So we clean all this up and in doing so enable cut-specific code paths for cuts C and D, which would not have been executed because the CHIP_92D_{C,D}_CUT constants were wrong and the cut version was thus recorded incorrectly. Signed-off-by: -
Lorenzo Bianconi authored
Added support for Belkin Surf N300 XR wireless usb adapter to rtlwifi driver Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Acked-by:
-
-
-
- 11 Apr, 2012 1 commit
-
-
Stanislaw Gruszka authored
This is workaround H/W or F/W bug, see in code comments. Without the fix ping can receive duplicated ICMP frames while associated with legacy AP. Reported-by:
Walter Goldens <goldenstranger@yahoo.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
