- 27 Feb, 2019 40 commits
-
-
Varun Prakash authored
[ Upstream commit 9e8f1c79 ] In case of ->set_param() and ->bind_conn() cxgb4i driver does not wait for cmd completion, this can create race conditions, to avoid this add wait_for_completion(). Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Avri Altman authored
[ Upstream commit 9be9db9f ] Albeit we no longer rely on those hard-coded descriptor sizes, we still use them as our defaults, so better get it right. While adding its sysfs entries, we forgot to update the geometry descriptor size. It is 0x48 according to UFS2.1, and wasn't changed in UFS3.0. [mkp: typo] Fixes: c720c091 (scsi: ufs: sysfs: geometry descriptor) Signed-off-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
Manish Rangankar authored
[ Upstream commit 34a2ce88 ] When the driver finds invalid destination MAC for the first un-reachable target, and before completes the PATH_REQ operation, set new ep_state to OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper open-iscsi layer is notified to complete the login process on the first un-reachable target and thus proceed login to other reachable targets. Signed-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
Stanley Chu authored
[ Upstream commit ce9e7bce ] hba->is_sys_suspended is set after successful system suspend but not clear after successful system resume. According to current behavior, hba->is_sys_suspended will not be set if host is runtime-suspended but not system-suspended. Thus we shall aligh the same policy: clear this flag even if host remains runtime-suspended after ufshcd_system_resume is successfully returned. Simply fix this flag to correct host status logs. Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
-
Xiubo Li authored
[ Upstream commit a94a2572 ] Currently there is one cmd timeout timer and one qfull timer for each udev, and whenever any new command is coming in we will update the cmd timer or qfull timer. For some corner cases the timers are always working only for the ringbuffer's and full queue's newest cmd. That's to say the timer won't be fired even if one cmd has been stuck for a very long time and the deadline is reached. This fix will keep the cmd/qfull timers to be pended for the oldest cmd in ringbuffer and full queue, and will update them with the next cmd's deadline only when the old cmd's deadline is reached or removed from the ringbuffer and full queue. Signed-off-by:
Xiubo Li <xiubli@redhat.com> Acked-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 2ff33d66 ] The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be concurrently executed. isdn_tty_tiocmset isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr); isdn_tty_set_termios isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr); Thus, some concurrency double-free bugs may occur. These possible bugs are found by a static tool written by myself and my manual code review. To fix these possible bugs, the mutex lock "modem_info_mutex" used in isdn_tty_tiocmset() is added in isdn_tty_set_termios(). Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit fa0be0a4 ] Currently, TX is given a budget which is consumed by stmmac_tx_clean() and stmmac_rx() is given the remaining non-consumed budget. This is wrong and in case we are sending a large number of packets this can starve RX because remaining budget will be low. Let's give always the same budget for RX and TX clean. While at it, check if we missed any interrupts while we were in NAPI callback by looking at DMA interrupt status. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 3b509466 ] RX Watchdog can be disabled by platform definitions but currently we are initializing the descriptors before checking if Watchdog must be disabled or not. Fix this by checking earlier if user wants Watchdog disabled or not. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 0650d401 ] Check if CBS is currently supported before trying to configure it in HW. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit fcc509eb ] In DMA interrupt handler we were clearing all interrupts status, even the ones that were not active. Fix this and only clear the active interrupts. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 6dea7e18 ] Since commit b7d0f08e, the enable / disable of PCI device is not managed which will result in IO regions not being automatically unmapped. As regions continue mapped it is currently not possible to remove and then probe again the PCI module of stmmac. Fix this by manually unmapping regions on remove callback. Changes from v1: - Fix build error Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Fixes: b7d0f08e ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by:
-
Tony Luck authored
[ Upstream commit 0919871a ] Possible race accessing memdev structures after dropping the mutex. Dan Williams says this could race against another thread that is doing: # echo "ACPI0012:00" > /sys/bus/acpi/drivers/nfit/unbind Reported-by:
Jane Chu <jane.chu@oracle.com> Fixes: 23222f8f ("acpi, nfit: Add function to look up nvdimm...") Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit fb0bdec5 ] Commit 8c8c10b9 ("powerpc/8xx: fix handling of early NULL pointer dereference") moved the loading of r6 earlier in the code. As some functions are called inbetween, r6 needs to be loaded again with the address of swapper_pg_dir in order to set PTE pointers for the Abatron BDI. Fixes: 8c8c10b9 ("powerpc/8xx: fix handling of early NULL pointer dereference") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Leon Romanovsky authored
[ Upstream commit 9d9f59b4 ] As part of audit process to update drivers to use rdma_restrack_add() ensure that QP objects is cleared before access. Such change fixes the crash observed with uninitialized non zero sgid attr accessed by ib_destroy_qp(). CPU: 3 PID: 74 Comm: kworker/u16:1 Not tainted 4.19.10-300.fc29.x86_64 Workqueue: ipoib_wq ipoib_cm_tx_reap [ib_ipoib] RIP: 0010:rdma_put_gid_attr+0x9/0x30 [ib_core] RSP: 0018:ffffb7ad819dbde8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8d1bdf5a2e00 RCX: 0000000000002699 RDX: 206c656e72656af8 RSI: ffff8d1bf7ae6160 RDI: 206c656e72656b20 RBP: 0000000000000000 R08: 0000000000026160 R09: ffffffffc06b45bf R10: ffffe849887da000 R11: 0000000000000002 R12: ffff8d1be30cb400 R13: ffff8d1bdf681800 R14: ffff8d1be2272400 R15: ffff8d1be30ca000 FS: 0000000000000000(0000) GS:ffff8d1bf7ac0000(0000) knlGS:0000000000000000 Trace: ib_destroy_qp+0xc9/0x240 [ib_core] ipoib_cm_tx_reap+0x1f9/0x4e0 [ib_ipoib] process_one_work+0x1a1/0x3a0 worker_thread+0x30/0x380 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Reported-by:
Alexander Murashkin <AlexanderMurashkin@msn.com> Tested-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
wenxu authored
[ Upstream commit 10f4e765 ] In the forward chain, the iif is changed from slave device to master vrf device. Thus, flow offload does not find a match on the lower slave device. This patch uses the cached route, ie. dst->dev, to update the iif and oif fields in the flow entry. After this patch, the following example works fine: # ip addr add dev eth0 1.1.1.1/24 # ip addr add dev eth1 10.0.0.1/24 # ip link add user1 type vrf table 1 # ip l set user1 up # ip l set dev eth0 master user1 # ip l set dev eth1 master user1 # nft add table firewall # nft add flowtable f fb1 { hook ingress priority 0 \; devices = { eth0, eth1 } \; } # nft add chain f ftb-all {type filter hook forward priority 0 \; policy accept \; } # nft add rule f ftb-all ct zone 1 ip protocol tcp flow offload @fb1 # nft add rule f ftb-all ct zone 1 ip protocol udp flow offload @fb1 Signed-off-by:
wenxu <wenxu@ucloud.cn> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Song Liu authored
[ Upstream commit beaf3d19 ] As Naresh reported, test_stacktrace_build_id() causes panic on i386 and arm32 systems. This is caused by page_address() returns NULL in certain cases. This patch fixes this error by using kmap_atomic/kunmap_atomic instead of page_address. Fixes: 615755a7 (" bpf: extend stackmap to save binary_build_id+offset instead of address") Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 9f51c05d ] The problem is that we call this with a spin lock held. The call tree is: pvcalls_front_accept() holds bedata->socket_lock. -> create_active() -> __get_free_pages() uses GFP_KERNEL The create_active() function is only called from pvcalls_front_accept() with a spin_lock held, The allocation is not allowed to sleep and GFP_KERNEL is not sufficient. This issue was detected by using the Coccinelle software. v2: Add a function doing the allocations which is called outside the lock and passing the allocated data to create_active(). v3: Use the matching deallocators i.e., free_page() and free_pages(), respectively. v4: It would be better to pre-populate map (struct sock_mapping), rather than introducing one more new struct. v5: Since allocating the data outside of this call it should also be freed outside, when create_active() fails. Move kzalloc(sizeof(*map2), GFP_ATOMIC) outside spinlock and use GFP_KERNEL instead. v6: Drop the superfluous calls. Suggested-by:
Juergen Gross <jgross@suse.com> Suggested-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by:
Stefano Stabellini <sstabellini@kernel.org> Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Acked-by:
-
Yuchung Cheng authored
[ Upstream commit 31aa6503 ] The existing BPF TCP initial congestion window (TCP_BPF_IW) does not to work on (active) Fast Open sender. This is because it changes the (initial) window only if data_segs_out is zero -- but data_segs_out is also incremented on SYN-data. This patch fixes the issue by proerly accounting for SYN-data additionally. Fixes: fc747810 ("bpf: Adds support for setting initial cwnd") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Lawrence Brakmo <brakmo@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
wenxu authored
[ Upstream commit a799aea0 ] Using the following example: client 1.1.1.7 ---> 2.2.2.7 which dnat to 10.0.0.7 server The first reply packet (ie. syn+ack) uses an incorrect destination address for the reverse route lookup since it uses: daddr = ct->tuplehash[!dir].tuple.dst.u3.ip; which is 2.2.2.7 in the scenario that is described above, while this should be: daddr = ct->tuplehash[dir].tuple.src.u3.ip; that is 10.0.0.7. Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit 41af167f ] 64bit JAZZ builds failed with linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`: /linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`? [-Werror=implicit-function-declaration] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^~~~~~~~~ CKSEG1ADDR /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^ In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0, from /linux-next/include/linux/compiler.h:248, from /linux-next/include/linux/kernel.h:10, from /linux-next/arch/mips/jazz/jazzdma.c:11: /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] #define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ ^ /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in expansion of macro `_ACAST32_` #define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) ^~~~~~~~~ /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of macro `CPHYSADDR` r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl)); Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup fixes this. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit 3e2ffd65 ] Since commit 815f0ddb ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") clang no longer reuses the OPTIMIZER_HIDE_VAR macro from compiler-gcc - instead it gets the version in include/linux/compiler.h. Unfortunately that version doesn't actually prevent compiler from optimizing out the variable. Fix up by moving the macro out from compiler-gcc.h to compiler.h. Compilers without incline asm support will keep working since it's protected by an ifdef. Also fix up comments to match reality since we are no longer overriding any macros. Build-tested with gcc and clang. Fixes: 815f0ddb ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Cc: Eli Friedman <efriedma@codeaurora.org> Cc: Joe Perches <joe@perches.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
-
Logan Gunthorpe authored
[ Upstream commit cc29a1b0 ] scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the command size to allocate based on the prot_capabilities. In the isci driver, scsi_host_set_prot() is called after scsi_add_host() so the command size gets calculated to be smaller than it needs to be. Eventually, scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it was sized correctly and a buffer overrun may occur. However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line size, the mistake can go unnoticed. The bug was noticed after the struct request size was reduced by commit 9d037ad7 ("block: remove req->timeout_list") Which likely reduced the allocated space for the request by an entire cache line, enough that the overflow could be hit and it caused a panic, on boot, at: RIP: 0010:t10_pi_complete+0x77/0x1c0 Call Trace: <IRQ> sd_done+0xf5/0x340 scsi_finish_command+0xc3/0x120 blk_done_softirq+0x83/0xb0 __do_softirq+0xa1/0x2e6 irq_exit+0xbc/0xd0 call_function_single_interrupt+0xf/0x20 </IRQ> sd_done() would call scsi_prot_sg_count() which reads the number of entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of the allocated space it reads a garbage number and erroneously calls t10_pi_complete(). To prevent this, the calls to scsi_host_set_prot() are moved into isci_host_alloc() before the call to scsi_add_host(). Out of caution, also move the similar call to scsi_host_set_guard(). Fixes: 3d2d7525 ("[SCSI] isci: T10 DIF support") Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.comSigned-off-by:
Logan Gunthorpe <logang@deltatee.com> Cc: Intel SCU Linux support <intel-linux-scu@intel.com> Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 72b4a046 ] The return code should be check while qla4xxx_copy_from_fwddb_param fails. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
-
Taehee Yoo authored
[ Upstream commit b91d9036 ] There is no code that decreases the reference count of stateful objects in error path of the nft_add_set_elem(). this causes a leak of reference count of stateful objects. Test commands: $nft add table ip filter $nft add counter ip filter c1 $nft add map ip filter m1 { type ipv4_addr : counter \;} $nft add element ip filter m1 { 1 : c1 } $nft add element ip filter m1 { 1 : c1 } $nft delete element ip filter m1 { 1 } $nft delete counter ip filter c1 Result: Error: Could not process rule: Device or resource busy delete counter ip filter c1 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ At the second 'nft add element ip filter m1 { 1 : c1 }', the reference count of the 'c1' is increased then it tries to insert into the 'm1'. but the 'm1' already has same element so it returns -EEXIST. But it doesn't decrease the reference count of the 'c1' in the error path. Due to a leak of the reference count of the 'c1', the 'c1' can't be removed by 'nft delete counter ip filter c1'. Fixes: 8aeff920 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 4fabf3bf ] Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is not affected. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Nir Dotan authored
[ Upstream commit ff0db43c ] When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert(). In case of C-TCAM HW insertion error, the opposite action should take place. Add error handling case in which the C-TCAM region entry is removed, by calling cregion->ops->entry_remove(). Fixes: a0a777b9 ("mlxsw: spectrum_acl: Start using A-TCAM") Signed-off-by:
Nir Dotan <nird@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 6e17f58c ] The clean up is handled by the caller, rpcrdma_buffer_create(), so this call to rpcrdma_sendctxs_destroy() leads to a double free. Fixes: ae72950a ("xprtrdma: Add data structure to manage RDMA Send arguments") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Alban Bedel authored
[ Upstream commit 565dc8a4 ] CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF boards, enable it in the default config to get a working setup out of the box. Signed-off-by:
Alban Bedel <albeu@free.fr> Signed-off-by:
-
Stephen Warren authored
[ Upstream commit f65e192a ] This patch solves a crash at the time of mlx4 driver unload or system shutdown. The crash occurs because dma_alloc_coherent() returns one value in mlx4_alloc_icm_coherent(), but a different value is passed to dma_free_coherent() in mlx4_free_icm_coherent(). In turn this is because when allocated, that pointer is passed to sg_set_buf() to record it, then when freed it is re-calculated by calling lowmem_page_address(sg_page()) which returns a different value. Solve this by recording the value that dma_alloc_coherent() returns, and passing this to dma_free_coherent(). This patch is roughly equivalent to commit 378efe79 ("RDMA/hns: Get rid of page operation after dma_alloc_coherent"). Based-on-code-from: Christoph Hellwig <hch@lst.de> Signed-off-by:
Stephen Warren <swarren@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 3aa8b8bb ] These files need #include <linux/mod_devicetable.h> to compile correctly. Fixes: ac316725 ("headers: separate linux/mod_devicetable.h from linux/platform_device.h") Signed-off-by:
NeilBrown <neil@brown.name> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Andrey Ignatov authored
[ Upstream commit 976b4f3a ] Test that sys_sendmsg BPF hook doesn't break sys_sendmsg behaviour to rewrite destination IPv6 = [::] with [::1] (BSD'ism). Two test cases are added: 1) User passes dst IPv6 = [::] and BPF_CGROUP_UDP6_SENDMSG program doesn't touch it. 2) User passes dst IPv6 != [::], but BPF_CGROUP_UDP6_SENDMSG program rewrites it with [::]. In both cases [::1] is used by sys_sendmsg code eventually and datagram is sent successfully for unconnected UDP socket. Example of relevant output: Test case: sendmsg6: set dst IP = [::] (BSD'ism) .. [PASS] Test case: sendmsg6: preserve dst IP = [::] (BSD'ism) .. [PASS] Signed-off-by:
Andrey Ignatov <rdna@fb.com> Signed-off-by:
-
Andrey Ignatov authored
[ Upstream commit e8e36984 ] sys_sendmsg has supported unspecified destination IPv6 (wildcard) for unconnected UDP sockets since 876c7f41. When [::] is passed by user as destination, sys_sendmsg rewrites it with [::1] to be consistent with BSD (see "BSD'ism" comment in the code). This didn't work when cgroup-bpf was enabled though since the rewrite [::] -> [::1] happened before passing control to cgroup-bpf block where fl6.daddr was updated with passed by user sockaddr_in6.sin6_addr (that might or might not be changed by BPF program). That way if user passed [::] as dst IPv6 it was first rewritten with [::1] by original code from 876c7f41, but then rewritten back with [::] by cgroup-bpf block. It happened even when BPF_CGROUP_UDP6_SENDMSG program was not present (CONFIG_CGROUP_BPF=y was enough). The fix is to apply BSD'ism after cgroup-bpf block so that [::] is replaced with [::1] no matter where it came from: passed by user to sys_sendmsg or set by BPF_CGROUP_UDP6_SENDMSG program. Fixes: 1cedee13 ("bpf: Hooks for sys_sendmsg") Reported-by:
Nitin Rawat <nitin.rawat@intel.com> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit bb989501 ] When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will identify a use after free bug: [134.189505] Unable to handle kernel paging request at virtual address 006b6b6b6b6b6b6b [134.197553] Mem abort info: [134.200381] ESR = 0x96000004 [134.203487] Exception class = DABT (current EL), IL = 32 bits [134.209497] SET = 0, FnV = 0 [134.212596] EA = 0, S1PTW = 0 [134.215777] Data abort info: [134.218701] ISV = 0, ISS = 0x00000004 [134.222596] CM = 0, WnR = 0 [134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges [134.232851] Internal error: Oops: 96000004 [#1] SMP [134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G OE 4.19.5-1.2.34.aarch64 #1 [134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018 [134.255181] pstate: 20000005 (nzCv daif -PAN -UAO) [134.260044] pc : hns_ae_put_handle+0x38/0x60 [134.264372] lr : hns_ae_put_handle+0x24/0x60 [134.268700] sp : ffff00001be93c50 [134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040 [134.277442] x27: 0000000000000000 x26: 0000000000000000 [134.282830] x25: 0000000056000000 x24: 0000000000000015 [134.288284] x23: ffff0000096fe098 x22: ffff000001050070 [134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098 [134.303287] x19: ffff80afb75ec098 x18: 0000000000000000 [134.312945] x17: 0000000000000000 x16: 0000000000000000 [134.322517] x15: 0000000000000002 x14: 0000000000000000 [134.332030] x13: dead000000000100 x12: ffff7e02bea3c988 [134.341487] x11: ffff80affbee9e68 x10: 0000000000000000 [134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000 [134.360569] x7 : dead000000000100 x6 : ffff000009579748 [134.370059] x5 : 0000000000210d00 x4 : 0000000000000000 [134.379550] x3 : 0000000000000001 x2 : 0000000000000000 [134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000 [134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd) [134.408498] Call trace: [134.414611] hns_ae_put_handle+0x38/0x60 [134.422208] hnae_put_handle+0xd4/0x108 [134.429563] hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv] [134.438342] platform_drv_remove+0x2c/0x70 [134.445958] device_release_driver_internal+0x174/0x208 [134.454810] driver_detach+0x70/0xd8 [134.461913] bus_remove_driver+0x64/0xe8 [134.469396] driver_unregister+0x34/0x60 [134.476822] platform_driver_unregister+0x20/0x30 [134.485130] hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv] [134.494634] __arm64_sys_delete_module+0x238/0x290 struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is freed, than use hnae_handle will cause use after free panic. This patch frees vf_cb after hnae_handle used. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit 46721c3d ] Make sure chain element is updated before ringing the doorbell. Signed-off-by:
Denis Bolotin <dbolotin@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit 2d533a92 ] In PBL chains with non power of 2 page count, the producer is not at the beginning of the chain when index is 0 after a wrap. Therefore, after the producer index wrap around, page index should be calculated more carefully. Signed-off-by:
-
YueHaibing authored
[ Upstream commit 1f8ce09b ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/xen/pvcalls-back.c: In function 'pvcalls_sk_state_change': drivers/xen/pvcalls-back.c:286:28: warning: variable 'intf' set but not used [-Wunused-but-set-variable] It not used since e6587cdb ("pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read") Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 9e28989d ] When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will contain random value. Further execution uses "old_adc0" even when mc13xxx_reg_read() fails. The fix checks the return value of mc13xxx_reg_read(), and exits the execution when it fails. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Keerthy authored
[ Upstream commit 75d4c5e0 ] Use devm_regmap_add_irq_chip and clean up error path in probe and also the remove function. Reported-by:
Christian Hohnstaedt <Christian.Hohnstaedt@wago.com> Signed-off-by:
Keerthy <j-keerthy@ti.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Enric Balletbo i Serra authored
[ Upstream commit 18e294dd ] The driver adds different MFD child devices via mfd_add_devices() and hence it is required to call mfd_remove_devices() to remove MFD child devices. Fixes: 5e011558 ("cros_ec: Move cros_ec_dev module to drivers/mfd") Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
Oskari Lemmela authored
[ Upstream commit ea90e7b4 ] Parts of the AXP803 are compatible with their counterparts on the AXP813. These include the GPIO, ADC, AC and battery power supplies. Signed-off-by:
Oskari Lemmela <oskari@lemmela.net> Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Tested-by:
Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by:
-
