- 27 Mar, 2013 1 commit
-
-
Benjamin Tissoires authored
Commit "HID: multitouch: use the callback "report" instead..." breaks the buttons of touchpads following the HID multitouch specification. The buttons were emmitted through hid-input, but as now the events are generated only in hid-multitouch, the buttons are not emmitted anymore. The input_event() call is far much simpler than the hid-input one as many of the different tests do not apply to multitouch touchpads. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- 18 Mar, 2013 3 commits
-
-
Jiri Kosina authored
Fix build problem caused by typo introduced by 620ae90e ("HID: usbhid: quirk for MSI GX680R led panel"). Reported-by: fengguang.wu@intel.com Signed-off-by:
-
Josh Boyer authored
This keyboard backlight device causes a 10 second delay to boot. Add it to the quirk list with HID_QUIRK_NO_INIT_REPORTS. This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=907221 Cc: stable@vger.kernel.org Signed-off-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Josh Boyer authored
This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS, otherwise it causes 10 seconds timeout during report initialization. This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=806587 Cc: stable@vger.kernel.org Signed-off-by:
-
- 07 Mar, 2013 1 commit
-
-
Benjamin Tissoires authored
hid_output_raw_report() makes a direct call to usb_control_msg(). However, some USB3 boards have shown that the usb device is not ready during the .probe(). This blocks the entire usb device, and the paired mice, keyboards are not functional. The dmesg output is the following: [ 11.912287] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 11.912537] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32 [ 11.912636] logitech-djreceiver: probe of 0003:046D:C52B.0003 failed with error -32 Relying on the scheduled call to usbhid_submit_report() fixes the problem. related bugs: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1072082 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1039143 https://bugzilla.redhat.com/show_bug.cgi?id=840391 https://bugzilla.kernel.org/show_bug.cgi?id=49781Reported-and-tested-by:
Bob Bowles <bobjohnbowles@gmail.com> Signed-off-by:
-
- 22 Feb, 2013 35 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID subsystem updates from Jiri Kosina: "HID subsystem and drivers update. Highlights: - new support of a group of Win7/Win8 multitouch devices, from Benjamin Tissoires - fix for compat interface brokenness in uhid, from Dmitry Torokhov - conversion of drivers to use hid_driver helper, by H Hartley Sweeten - HID over I2C transport received ACPI enumeration support, written by Mika Westerberg - there is an ongoing effort to make HID sensor hubs independent of USB transport. The first self-contained part of this work is provided here, done by Mika Westerberg - a few smaller fixes here and there, support for a couple new devices added" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (43 commits) HID: Correct Logitech order in hid-ids.h HID: LG4FF: Remove unnecessary deadzone code HID: LG: Prevent the Logitech Gaming Wheels deadzone HID: LG: Fix detection of Logitech Speed Force Wireless (WiiWheel) HID: LG: Add support for Logitech Momo Force (Red) Wheel HID: hidraw: print message when succesfully initialized HID: logitech: split accel, brake for Driving Force wheel HID: logitech: add report descriptor for Driving Force wheel HID: add ThingM blink(1) USB RGB LED support HID: uhid: make creating devices work on 64/32 systems HID: wiimote: fix nunchuck button parser HID: blacklist Velleman data acquisition boards HID: sensor-hub: don't limit the driver only to USB bus HID: sensor-hub: get rid of unused sensor_hub_grabbed_usages[] table HID: extend autodetect to handle I2C sensors as well HID: ntrig: use input_configured() callback to set the name HID: multitouch: do not use pointers towards hid-core HID: add missing GENERIC_HARDIRQ dependency HID: multitouch: make MT_CLS_ALWAYS_TRUE the new default class HID: multitouch: fix protocol for Elo panels ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds authored
Pull trivial tree from Jiri Kosina: "Assorted tiny fixes queued in trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits) DocBook: update EXPORT_SYMBOL entry to point at export.h Documentation: update top level 00-INDEX file with new additions ARM: at91/ide: remove unsused at91-ide Kconfig entry percpu_counter.h: comment code for better readability x86, efi: fix comment typo in head_32.S IB: cxgb3: delay freeing mem untill entirely done with it net: mvneta: remove unneeded version.h include time: x86: report_lost_ticks doesn't exist any more pcmcia: avoid static analysis complaint about use-after-free fs/jfs: Fix typo in comment : 'how may' -> 'how many' of: add missing documentation for of_platform_populate() btrfs: remove unnecessary cur_trans set before goto loop in join_transaction sound: soc: Fix typo in sound/codecs treewide: Fix typo in various drivers btrfs: fix comment typos Update ibmvscsi module name in Kconfig. powerpc: fix typo (utilties -> utilities) of: fix spelling mistake in comment h8300: Fix home page URL in h8300/README xtensa: Fix home page URL in Kconfig ...
-
Linus Torvalds authored
Merge misc patches from Andrew Morton: - Florian has vanished so I appear to have become fbdev maintainer again :( - Joel and Mark are distracted to welcome to the new OCFS2 maintainer - The backlight queue - Small core kernel changes - lib/ updates - The rtc queue - Various random bits * akpm: (164 commits) rtc: rtc-davinci: use devm_*() functions rtc: rtc-max8997: use devm_request_threaded_irq() rtc: rtc-max8907: use devm_request_threaded_irq() rtc: rtc-da9052: use devm_request_threaded_irq() rtc: rtc-wm831x: use devm_request_threaded_irq() rtc: rtc-tps80031: use devm_request_threaded_irq() rtc: rtc-lp8788: use devm_request_threaded_irq() rtc: rtc-coh901331: use devm_clk_get() rtc: rtc-vt8500: use devm_*() functions rtc: rtc-tps6586x: use devm_request_threaded_irq() rtc: rtc-imxdi: use devm_clk_get() rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug() rtc: rtc-pcf8583: use dev_warn() instead of printk() rtc: rtc-sun4v: use pr_warn() instead of printk() rtc: rtc-vr41xx: use dev_info() instead of printk() rtc: rtc-rs5c313: use pr_err() instead of printk() rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug() rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug() rtc: rtc-ds2404: use dev_err() instead of printk() rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk() ...
-
Jingoo Han authored
Use devm_*() functions to make cleanup paths more simple. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jingoo Han authored
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by:
-
Jingoo Han authored
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by:
-
Jingoo Han authored
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by:
-
Jingoo Han authored
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by:
-
Jingoo Han authored
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by:
-
Jingoo Han authored
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by:
-
Jingoo Han authored
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by:
-
Jingoo Han authored
Use devm_*() functions to make cleanup paths more simple. Signed-off-by:
-
Jingoo Han authored
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by:
-
Jingoo Han authored
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by:
-
Jingoo Han authored
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:
-
Jingoo Han authored
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:
-
Jingoo Han authored
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:
-
Jingoo Han authored
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:
-
Jingoo Han authored
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:
-
Jingoo Han authored
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:
-
Jingoo Han authored
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:
-
Jingoo Han authored
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:
-
Jingoo Han authored
Fix the checkpatch warnings as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... WARNING: please, no space before tabs Signed-off-by:
-
Jingoo Han authored
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:
-
Jingoo Han authored
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:
-
Chao Xie authored
The original sa1100_rtc_open/sa1100_rtc_release will be called when the /dev/rtc0 is opened or closed. In fact, these two functions will enable/disable the clock. Disabling clock will make rtc not work. So only enable/disable clock when probe/remove the device. Signed-off-by:
Chao Xie <chao.xie@marvell.com> Acked-by:
Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Leo Song <liangs@marvell.com> Signed-off-by:
-
Jonghwa Lee authored
Add an rtc driver for Maxim 8997 multifunction chip. Max8997 has rtc module in it. and it can be used for timekeeping clock and system alarm. It provide various operational mode those are BCD/binary, 24/12hour, am/pm. Driver sets binary/24/ for default. Maxim 8997 also supports SMPL(Sudden Momentary Power Loss), WTSR (Watchdog Timeout and Software Reset). Signed-off-by:
Jonghwa Lee <jonghwa3.lee@samsung.com> Cc: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by:
-
Jingoo Han authored
Use dev_dbg() instaed of pr_debug() to be consistent. Signed-off-by:
-
Gregory CLEMENT authored
The Armada 370 and Armada XP Socs have the same controller that the one used in the orion platforms. This patch updates the device tree for these SoCs. Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by:
Andrew Lunn <andrew@lunn.ch> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
Rob Herring authored
Mark the pl031 as wake-up capable so that rtcwake and suspend test can work. Signed-off-by:
Rob Herring <rob.herring@calxeda.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Torben Hohn authored
[akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Torben Hohn <torbenh@linutronix.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Laxman Dewangan authored
All interrupt get disabled during system suspend and enabled during system resume. The enabling/disabling of interrupt happen in sequence of interrupt registration with framework. Therefore, in resume, the parent interrupt of this device enabled before the RTC irq interrupt enabled. If RTC is enabled for alarm wake and if system wake by alarm then there is interrupt pending for RTC. In resume, the parent interrupt get enabled before the rtc interrupt and hence ISR get served. In ISR, it founds that rtc interrupt is disabled and so it does not call the rtc isr handler and hence it misses the interrupt. Setting flag for early resume so that rtc interrupt get enabled before parent interrupt and so rtc interrupt get enabled when parent interrupt handler check for interrupt of device and call the rtc handler if it is there. This way it will not miss the interrupt. Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Laxman Dewangan authored
Use SET_SYSTEM_SLEEP_PM_OPS for setting suspend/resume callbacks for dev_pm_ops. Signed-off-by:
-
Laxman Dewangan authored
The driver stores the interrupt enable register before going to suspend and restore in resume. Also it enables alarm before going to suspend. The driver only write the Interrupt enable register for enabling ALARM and does not enable any other bits. So it is not require to save complete register and enable ALARM interrupt before suspend and restore in resume. Also ALARM interrupt already enable if alarm is enabled before going to suspend and hence it is not require to enable explictly in suspend. Removing such above code. Signed-off-by:
-
Laxman Dewangan authored
Making the rtc driver as wakeup capabale and leaving the wake enable/disable decision to user space through a sysfs attribute. In suspend, enable wake if device wakeup enabled. In resume disable wake again. This change is inline with the Documentation/power/devices.txt# /sys/devices/.../power/wakeup files Signed-off-by:
-
