- 04 May, 2016 9 commits
-
-
Preethi Banala authored
The code was ignoring higher 32 bits of stats registers. This patch correctly fills out 64 bit value in two 32 bit words. Signed-off-by:
Preethi Banala <preethi.banala@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Preethi Banala authored
Remove duplicate and unused device ID definitions. Signed-off-by:
-
Emil Tantilov authored
This change aims to simplify the logic we use to determine WOL support by reading the EEPROM bits for MACs X540 and newer. Also some cleanups in ixgbe_wol_supported() - changed return type to bool and removed redundant return variable by simply using return after the checks. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
-
Emil Tantilov authored
We had some 82599 subdevice IDs missing from the list of parts that support WoL. Reported-by:
Neil Horman <nhorman@redhat.com> Signed-off-by:
-
KY Srinivasan authored
On Hyper-V, the VF/PF communication is a via software mediated path as opposed to the hardware mailbox. Make the necessary adjustments to support Hyper-V. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Tested-by:
-
KY Srinivasan authored
Intel SR-IOV cards present different ID when running on Hyper-V. Add the device IDs presented while running on Hyper-V. Signed-off-by:
-
Amritha Nambiar authored
Adds support to set filters with multiple header fields (L3,L4)to match on. This is achieved in the following order: 1. Create a leaf hash table for the next header. 2. Create a link to the leaf hash table from the base hash table with matches on next header type and current header fields. 3. Add filter in leaf hash table with match on next header fields and action. Verified with the following filters : Match TCP and DIP: handle 1: u32 divisor 1 u32 ht 800: order 1 link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat \ match ip protocol 6 ff match ip dst 10.0.0.1/32 match tcp src 28 ffff action drop Delete the filter: Match on DIP, SIP, UDP (SPort, DPort): handle 2: u32 divisor 1 u32 ht 800: order 2 link 2: \ offset at 0 mask 0f00 shift 6 plus 0 eat \ match ip dst 15.0.0.2/32 match ip protocol 17 ff \ match ip src 15.0.0.1/32 match udp src 30 ffff match udp dst 32 ffff action drop Signed-off-by:Amritha Nambiar <amritha.nambiar@intel.com> Acked-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by:
-
Sridhar Samudrala authored
This patch enables 'redirect' to a SRIOV VF or a offloaded macvlan device queue via tc 'mirred' action. Verified with the following script that creates SRIOV VFs, offloaded macvlan and adds tc u32 filters with redirect action to the associated netdevs. # add ingress qdisc. tc qdisc add dev p4p1 ingress # enable hw tc offload. ethtool -K p4p1 hw-tc-offload on # create 4 sriov VFs and bring up the first one. echo 4 > /sys/class/net/p4p1/device/sriov_numvfs sleep 1 ip link set p4p1 up ip link set p4p1_0 up # create a offloaded macvlan device and bring it up. ethtool -K p4p1 l2-fwd-offload on ip link add link p4p1 name mvlan_1 type macvlan ip link set mvlan_1 up # add u32 filter with action to redirect to VF netdev tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: \ match ip src 192.168.1.3/32 \ action mirred egress redirect dev p4p1_0 # add u32 filter with action to redirect to macvlan netdev tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: \ match ip src 192.168.2.3/32 \ action mirred egress redirect dev mvlan_1 Signed-off-by: -
Sridhar Samudrala authored
Signed-off-by:
-
- 03 May, 2016 31 commits
-
-
Wei Wang authored
In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Hosts sending lot of ACK packets exhibit high sock_wfree() cost because of cache line miss to test SOCK_USE_WRITE_QUEUE We could move this flag close to sk_wmem_alloc but it is better to perform the atomic_sub_and_test() on a clean cache line, as it avoid one extra bus transaction. skb_orphan_partial() can also have a fast track for packets that either are TCP acks, or already went through another skb_orphan_partial() Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: redesign socket-level flow control The socket-level flow control in TIPC has long been due for a major overhaul. This series fixes this. ==================== Signed-off-by: -
Jon Paul Maloy authored
There are two flow control mechanisms in TIPC; one at link level that handles network congestion, burst control, and retransmission, and one at connection level which' only remaining task is to prevent overflow in the receiving socket buffer. In TIPC, the latter task has to be solved end-to-end because messages can not be thrown away once they have been accepted and delivered upwards from the link layer, i.e, we can never permit the receive buffer to overflow. Currently, this algorithm is message based. A counter in the receiving socket keeps track of number of consumed messages, and sends a dedicated acknowledge message back to the sender for each 256 consumed message. A counter at the sending end keeps track of the sent, not yet acknowledged messages, and blocks the sender if this number ever reaches 512 unacknowledged messages. When the missing acknowledge arrives, the socket is then woken up for renewed transmission. This works well for keeping the message flow running, as it almost never happens that a sender socket is blocked this way. A problem with the current mechanism is that it potentially is very memory consuming. Since we don't distinguish between small and large messages, we have to dimension the socket receive buffer according to a worst-case of both. I.e., the window size must be chosen large enough to sustain a reasonable throughput even for the smallest messages, while we must still consider a scenario where all messages are of maximum size. Hence, the current fix window size of 512 messages and a maximum message size of 66k results in a receive buffer of 66 MB when truesize(66k) = 131k is taken into account. It is possible to do much better. This commit introduces an algorithm where we instead use 1024-byte blocks as base unit. This unit, always rounded upwards from the actual message size, is used when we advertise windows as well as when we count and acknowledge transmitted data. The advertised window is based on the configured receive buffer size in such a way that even the worst-case truesize/msgsize ratio always is covered. Since the smallest possible message size (from a flow control viewpoint) now is 1024 bytes, we can safely assume this ratio to be less than four, which is the value we are now using. This way, we have been able to reduce the default receive buffer size from 66 MB to 2 MB with maintained performance. In order to keep this solution backwards compatible, we introduce a new capability bit in the discovery protocol, and use this throughout the message sending/reception path to always select the right unit. Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Paul Maloy authored
During neighbor discovery, nodes advertise their capabilities as a bit map in a dedicated 16-bit field in the discovery message header. This bit map has so far only be stored in the node structure on the peer nodes, but we now see the need to keep a copy even in the socket structure. This commit adds this functionality. Acked-by:
-
Jon Paul Maloy authored
In the refactoring commit d570d864 ("tipc: enqueue arrived buffers in socket in separate function") we did by accident replace the test if (sk->sk_backlog.len == 0) atomic_set(&tsk->dupl_rcvcnt, 0); with if (sk->sk_backlog.len) atomic_set(&tsk->dupl_rcvcnt, 0); This effectively disables the compensation we have for the double receive buffer accounting that occurs temporarily when buffers are moved from the backlog to the socket receive queue. Until now, this has gone unnoticed because of the large receive buffer limits we are applying, but becomes indispensable when we reduce this buffer limit later in this series. We now fix this by inverting the mentioned condition. Acked-by:
-
Oliver Neukum authored
Allow for SS+ USB Signed-off-by:
Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Oliver Neukum authored
Allow for SS+ USB Signed-off-by:
-
Oliver Neukum authored
Allow for SS+ USB Signed-off-by:
-
Manish Chopra authored
Configure and enable various tunnels on the adapter after PF start. This change was missed as a part of 'commit 464f6645 ("qed: Add infrastructure support for tunneling")' Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by:
-
David S. Miller authored
Joachim Eastwood says: ==================== stmmac: dwmac-socfpga refactor+cleanup This patch aims to remove the init/exit callbacks from the dwmac- socfpga driver and instead use standard PM callbacks. Doing this will also allow us to cleanup the driver. Eventually the init/exit callbacks will be deprecated and removed from all drivers dwmac-* except for dwmac-generic. Drivers will be refactored to use standard PM and remove callbacks. This patch set should not change the behavior of the driver itself, it only moves code around. The only exception to this is patch number 4 which restores the resume callback behavior which was changed in the "net: stmmac: socfpga: Remove re-registration of reset controller" patch. I belive calling phy_resume() only from the resume callback and not probe is the right thing to do. Changes from v1: - Rebase on net-next One heads-up here: The first patch changes the prototype of a couple of functions used in Alexandre's "add Ethernet glue logic for stm32 chip" patch [1] and will cause build failures for dwmac-stm32.c if not fixed up! If Alexandre's patch set is applied first I will gladly rebase my patch set to account for his driver as well. [1] https://patchwork.ozlabs.org/patch/614405/ ==================== Signed-off-by:
-
Joachim Eastwood authored
Remove old init callback which now contains only a call to socfpga_dwmac_setup(). Also rename socfpga_dwmac_setup() to indicate what the function really does. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Tested-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Joachim Eastwood authored
Calling phy_resume() should only be need during driver resume to workaround a hardware errata. Signed-off-by:
-
Joachim Eastwood authored
The dwmac-socfpga driver needs to control the reset usually managed by the core driver to set the PHY mode. Take a copy of the reset handle from core priv data so it can be used by the driver later. This also allow us to move reset handling into socfpga_dwmac_setup() where the code that needs it is located. Signed-off-by:
-
Joachim Eastwood authored
Implement the needed PM callbacks in the driver instead of relying on the init/exit hooks in stmmac_platform. This gives the driver more flexibility in how the code is organized. Eventually the init/exit callbacks will be deprecated in favor of the standard PM callbacks and driver remove function. Signed-off-by:
-
Joachim Eastwood authored
Change stmmac_remove/resume/suspend to take a device pointer so they can be used directly by drivers that doesn't need to perform anything device specific. This lets us remove the PCI pm functions and later simplifiy the platform drivers. Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move the fec_mpc52xx driver to new api {get|set}_link_ksettings. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move the fs-enet driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move the ucc driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move the gianfar driver to new api {get|set}_link_ksettings. Signed-off-by: -
Julia Lawall authored
The vsock_transport structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
The xgene_cle_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
-
Eric Dumazet authored
In presence of inelastic flows and stress, we can call fq_codel_drop() for every packet entering fq_codel qdisc. fq_codel_drop() is quite expensive, as it does a linear scan of 4 KB of memory to find a fat flow. Once found, it drops the oldest packet of this flow. Instead of dropping a single packet, try to drop 50% of the backlog of this fat flow, with a configurable limit of 64 packets per round. TCA_FQ_CODEL_DROP_BATCH_SIZE is the new attribute to make this limit configurable. With this strategy the 4 KB search is amortized to a single cache line per drop [1], so fq_codel_drop() no longer appears at the top of kernel profile in presence of few inelastic flows. [1] Assuming a 64byte cache line, and 1024 buckets Signed-off-by:
Dave Taht <dave.taht@gmail.com> Cc: Jonathan Morton <chromatix99@gmail.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Dave Taht Signed-off-by:
-
Kazuya Mizuguchi authored
Aligning the reception data size is not required. Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Tested-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2016-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers patches for 4.7 Major changes: brcmfmac * add support for nl80211 BSS_SELECT feature mwifiex * add platform specific wakeup interrupt support ath10k * implement set_tsf() for 10.2.4 branch * remove rare MSI range support * remove deprecated firmware API 1 support ath9k * add module parameter to invert LED polarity wcn36xx * fixes to get the driver properly working on Dragonboard 410c ==================== Signed-off-by:
-
Eric Dumazet authored
Locally generated TCP GSO packets having to go through a GRE/SIT/IPIP tunnel have to go through an expensive skb_unclone() Reallocating skb->head is a lot of work. Test should really check if a 'real clone' of the packet was done. TCP does not care if the original gso_type is changed while the packet travels in the stack. This adds skb_header_unclone() which is a variant of skb_clone() using skb_header_cloned() check instead of skb_cloned(). This variant can probably be used from other points. Signed-off-by:
-
Florian Westphal authored
- trans_timeout is incremented when tx queue timed out (tx watchdog). - tx_maxrate is set via sysfs Moving tx_maxrate to read-mostly part shrinks the struct by 64 bytes. While at it, also move trans_timeout (it is out-of-place in the 'write-mostly' part). Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== bridge: per-vlan stats This set adds support for bridge per-vlan statistics. In order to be able to dump statistics for many vlans we need a way to continue dumping after reaching maximum size, thus patches 01 and 02 extend the new stats API with a per-device extended link stats attribute and callback which can save its local state and continue where it left off afterwards. I considered using the already existing "fill_xstats" callback but it gets confusing since we need to separate the linkinfo dump from the new stats api dump and adding a flag/argument to do that just looks messy. I don't think the rtnl_link_ops size is an issue, so adding these seemed like the cleaner approach. Patches 03 and 04 add the stats support and netlink dump support respectively. The stats accounting is controlled via a bridge option which is default off, thus the performance impact is kept minimal. I've tested this set with both old and modified iproute2, kmemleak on and some traffic stress tests while adding/removing vlans and ports. v3: - drop the RCU pvid patch and remove one pointer fetch as requested - make stats accounting optional with default to off, the option is in the same cache line as vlan_proto and vlan_enabled, so it is already fetched before the fast path check thus the performance impact is minimal, this also allows us to avoid one vlan lookup and return early when using pvid - rebased and retested v2: - Improve the error checking, rename lidx to prividx and save the current idx user instead of restricting it to one in patch 01 - squash patch 02 into 01 and remove the restriction - add callback descriptions, improve the size calculation and change the xstats message structure to have an embedding level per rtnl link type so we can avoid one call to get the link type (and thus filter on it) and also each link type can now have any number of private attributes inside - fix a problem where the vlan stats are not dumped if the bridge has 0 vlans on it but has vlans on the ports, add bridge link type private attributes and also add paddings for future extensions to avoid at least a few netlink attributes and improve struct alignment - drop the is_skb_forwardable argument constifying patch as it's not needed anymore, but it's a nice cleanup which I'll send separately ==================== Signed-off-by: -
Nikolay Aleksandrov authored
Add a new LINK_XSTATS_TYPE_BRIDGE attribute and implement the RTM_GETSTATS callbacks for IFLA_STATS_LINK_XSTATS (fill_linkxstats and get_linkxstats_size) in order to export the per-vlan stats. The paddings were added because soon these fields will be needed for per-port per-vlan stats (or something else if someone beats me to it) so avoiding at least a few more netlink attributes. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Add support for per-VLAN Tx/Rx statistics. Every global vlan context gets allocated a per-cpu stats which is then set in each per-port vlan context for quick access. The br_allowed_ingress() common function is used to account for Rx packets and the br_handle_vlan() common function is used to account for Tx packets. Stats accounting is performed only if the bridge-wide vlan_stats_enabled option is set either via sysfs or netlink. A struct hole between vlan_enabled and vlan_proto is used for the new option so it is in the same cache line. Currently it is binary (on/off) but it is intentionally restricted to exactly 0 and 1 since other values will be used in the future for different purposes (e.g. per-port stats). Signed-off-by:
-
Nikolay Aleksandrov authored
Add callbacks to calculate the size and fill link extended statistics which can be split into multiple messages and are dumped via the new rtnl stats API (RTM_GETSTATS) with the IFLA_STATS_LINK_XSTATS attribute. Also add that attribute to the idx mask check since it is expected to be able to save state and resume dumping (e.g. future bridge per-vlan stats will be dumped via this attribute and callbacks). Each link type should nest its private attributes under the per-link type attribute. This allows to have any number of separated private attributes and to avoid one call to get the dev link type. Signed-off-by:
-
