On systems using kexec, the new kernel is booted straight from the old kernel, without any warning to the graphics driver. So the GPU is basically left as-is in a running state, however the CPU side is completly reset.

Without stating the saneness of anyone using kexec on live systems, we should at least try not to crash the GPU. This patch resets 3 registers to 0 that could cause bad things to happen to the running system.

This allows kexec to work on a Power6/RN50 system.
Signed-off-by: Dave Airlie <airlied@redhat.com>

This fixes a problem where on low VRAM cards we'd run out of space for validation.

[airlied: Tested on my M7, Thinkpad T42, compiz works with no problems.]
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is required for the NB_MISC regs on rs780/rs880 which
means HDMI/DVI/DP ports using PCIEPHY won't work without
it. It might also help with s/r (asic init) issues on other
atombios cards.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28774
and similar issues reported by Alberto Milone.

[airlied: Squash io fix patch]
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

We will need method of selecting encoder that should receive HDMI block. For
now we assign HDMI block to first enabled encoder. Hopefully there are not many
RS6x0 chips with two digital encoders.

[airlied: add RS740 checks as per Alex suggestion.]
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is needed to enable audio support on devices using polling. In case user
decides to disable audio (module parameter) we still will try to use timer in
r600_audio_enable_polling. This would lead to BUG in kernel/timer.c.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Userspace needs this information to access tiled
buffers via the CPU.

v2: rebased on evergreen accel changes
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Covers depth, cb, and textures. Hopefully I got this right.

v2: - fix bugs:
      https://bugs.freedesktop.org/show_bug.cgi?id=28327
      https://bugs.freedesktop.org/show_bug.cgi?id=28381
    - use ALIGNED(), IS_ALIGNED() macros
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Check for relocs for DB_DEPTH_INFO, CB_COLOR*_INFO, and texture
resources.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Needed for scanning out of a tiled buffer.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Needed for scanning out of a tiled buffer.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

rv6xx/rv7xx/evergreen families supported; older asics did
not have an internal thermal sensor.

Note, not all oems use the internal thermal sensor, so it's
only exposed in cases where it is used.

Note also, that most laptops use an oem specific ACPI solution for
GPU thermal information rather than using the internal thermal
sensor directly.

v2: export millidegrees celsius, use hwmon device properly.
v3: fix Kconfig
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

By calling the ATIF method in the radeon driver we can make sure
that hotkeys such as the video switch key emit ACPI events when
pressed.

agd5f: fix warning
Signed-off-by: Alberto Milone <alberto.milone@canonical.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Some tables have delays that can cause the timeout to hit
even when not intended.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=27744
and related bugs.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

- Make the logic in r100_pll_errata_after_index() match the other
errata functions
- Use rdev->family rather than rdev->flags & RADEON_FAMILY_MASK for kms
- replace rn50 check using ids with ASIC_IS_RN50 convenience macro
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Disables the crts as per dpms and also disables the ppll
associated with the crtc.  This should save additional power.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

It looks like there is a race condition between unbinding a framebuffer
on a hotplug event and user space trying to flip:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
IP: [<ffffffffa008c7d3>] intel_crtc_page_flip+0xc9/0x39c [i915]
PGD 114724067 PUD 1145bd067 PMD 0
Oops: 0000 [#1] SMP
Pid: 10954, comm: X Not tainted 2.6.35-rc5_stable_20100714+ #1
P5Q-EM/P5Q-EM
RIP: 0010:[<ffffffffa008c7d3>]  [<ffffffffa008c7d3>]
intel_crtc_page_flip+0xc9/0x39c [i915]
RSP: 0018:ffff880114927cc8  EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88012df48320 RCX: ffff88010c945600
RDX: ffff880001a109c8 RSI: ffff88010c945840 RDI: ffff88012df48320
RBP: ffff880114927d18 R08: ffff88012df48280 R09: ffff88012df48320
R10: 0000000003c2e0b0 R11: 0000000000003246 R12: ffff88010c945840
R13: ffff88012df48000 R14: 0000000000000060 R15: ffff88012dbb8000
FS:  00007f9e6078e830(0000) GS:ffff880001a00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000058 CR3: 00000001177a8000 CR4: 00000000000406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process X (pid: 10954, threadinfo ffff880114926000, task
ffff88012a4a1690)
Stack:
 ffff88010c945600 ffff880115b176c0 ffff88012db10000 0000000000000246
<0> fffffff40006101c ffff88010c945600 00000000ffffffea ffff88010c945600
<0> ffff88012df48320 ffff88011b4b6780 ffff880114927d78 ffffffffa003bd0e
Call Trace:
 [<ffffffffa003bd0e>] drm_mode_page_flip_ioctl+0x1bc/0x214 [drm]
 [<ffffffffa00311fc>] drm_ioctl+0x25e/0x35e [drm]
 [<ffffffffa003bb52>] ? drm_mode_page_flip_ioctl+0x0/0x214 [drm]
 [<ffffffff810f1c3c>] vfs_ioctl+0x2a/0x9e
 [<ffffffff810f227e>] do_vfs_ioctl+0x531/0x565
 [<ffffffff810f2307>] sys_ioctl+0x55/0x77
 [<ffffffff810e56d6>] ? sys_read+0x47/0x6f
 [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b
Code: 45 d4 f4 ff ff ff 0f 84 e0 02 00 00 48 8b 4d b0 49 8d 9d 20 03 00 00 48
89 df 49 89 4c 24 38 49 8b 07 49 89 44 24 20 49 8b 47 20 <48> 8b 40 58 49 c7 04
24 00 00 00 00 49 c7 44 24 18 a9 a5 08 a0
RIP  [<ffffffffa008c7d3>] intel_crtc_page_flip+0xc9/0x39c [i915]
 RSP <ffff880114927cc8>
CR2: 0000000000000058

References:

  Bug 28811 - [page-flipping] GPU hang when modeset after unplugging
              another monitor (under compiz)
  https://bugs.freedesktop.org/show_bug.cgi?id=28811Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

There's no convenient/reliable way for drivers to both obey the dithering
mode property, and to be able to attempt to provide a good default in all
cases.

This commit adds an "auto" method to the property which drivers can default
to if they wish, whilst still allowing the user to override the choice as
they do now.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Unify debug printing so it easier to track what's happening
while debugging.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Original behaviour will be preserved for drivers that don't implement
disable() hooks for an encoder.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Now that highlevel DRM no longer requires PCI, we can move the requirement
into the lowlevel drivers.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

More explicit than dpms. Same as the encoder disable function.

Need this to explicity disconnect plls from crtcs for reuse when you
plls:crtcs ratio isn't 1:1.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* drm-intel-lru:
  drm: implement helper functions for scanning lru list
  drm_mm: extract check_free_mm_node
  drm: sane naming for drm_mm.c
  drm: kill dead code in drm_mm.c
  drm: kill drm_mm_node->private
  drm: use list_for_each_entry in drm_mm.c

* drm-platform:
  drm: Make sure the DRM offset matches the CPU
  drm: Add __arm defines to DRM
  drm: Add support for platform devices to register as DRM devices
  drm: Remove drm_resource wrappers

We don't currently update the DPMS status of the connector (both in the
connector itself and the connector's DPMS property) in the fb helper
code.  This means that if the kernel FB core has blanked the screen,
sysfs will still show a DPMS status of "on".  It also means that when X
starts, it will try to light up the connectors, but the drm_crtc_helper
code will ignore the DPMS change since according to the connector, the
DPMS status is already on.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28436 (the annoying
"my screen was blanked when I started X and now it won't light up" bug).
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Connectors with a shared ddc line can be connected to different
encoders.

Reported by Pasi Kärkkäinen <pasik@iki.fi> on dri-devel
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

These helper functions can be used to efficiently scan lru list
for eviction. Eviction becomes a three stage process:
1. Scanning through the lru list until a suitable hole has been found.
2. Scan backwards to restore drm_mm consistency and find out which
   objects fall into the hole.
3. Evict the objects that fall into the hole.

These helper functions don't allocate any memory (at the price of
not allowing any other concurrent operations). Hence this can also be
used for ttm (which does lru scanning under a spinlock).

Evicting objects in this fashion should be more fair than the current
approach by i915 (scan the lru for a object large enough to contain
the new object). It's also more efficient than the current approach used
by ttm (uncoditionally evict objects from the lru until there's enough
free space).
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Hellstrom <thellstrom@vmwgfx.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

There are already two copies of this logic. And the new scanning
stuff will add some more. So extract it into a small helper
function.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Hellstrom <thellstrom@vmwgfx.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Yeah, I've kinda noticed that fl_entry is the free stack. Still
give it (and the memory node list ml_entry) decent names.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Hellstrom <thellstrom@vmwgfx.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Hellstrom <thellstrom@vmwgfx.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Only ever assigned, never used.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[glisse: I will re-add if needed for range-restricted allocations]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Thomas Hellstrom <thellstrom@vmwgfx.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Repeated ttm_page_alloc_init/fini fails noisily because the pool
manager kobj isn't zeroed out between uses (we could do just that but
statically allocated kobjects are generally considered a bad thing).
Move it to kzalloc'ed memory.

Note that this patch drops the refcounting behavior of the pool
allocator init/fini functions: it would have led to a race condition
in its current form, and anyway it was never exploited.

This fixes a regression with reloading kms modules at runtime, since
page allocator was introduced.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6205/1: perf: ensure counter delta is treated as unsigned
  ARM: 6202/1: Do not ARM_DMA_MEM_BUFFERABLE on RealView boards with L210/L220
  ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220
  ARM: 6195/1: OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMU
  ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore
  ARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB section
  ARM: 6192/1: VExpress: Align the machine_desc.phys_io to 1MB section
  ARM: 6188/1: Add a config option for the ARM11MPCore DMA cache maintenance workaround
  ARM: 6187/1: The v6_dma_inv_range() function must preserve data on SMP
  ARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds
  ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI
  [ARM] mmp: fix build failure due to IRQ_PMU depends on ARCH_PXA
  [ARM] pxa/mioa701: fix camera regression
  [ARM] pxa/z2: fix flash layout to final version
  [ARM] pxa/z2: fix missing include in battery driver
  [ARM] pxa: fix incorrect gpio type in udc_pxa2xx.h

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Fix incorrect branches event on AMD CPUs
  perf tools: Fix find tids routine by excluding "." and ".."
  x86: Send a SIGTRAP for user icebp traps

We should initialize the module dynamic debug datastructures
only after determining that the module is not loaded yet. This
fixes a bug that introduced in 2.6.35-rc2, where when a trying
to load a module twice, we also load it's dynamic printing data
twice which causes all sorts of nasty issues. Also handle
the dynamic debug cleanup later on failure.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (removed a #ifdef)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: remove block number from inode lookup code
  xfs: rename XFS_IGET_BULKSTAT to XFS_IGET_UNTRUSTED
  xfs: validate untrusted inode numbers during lookup
  xfs: always use iget in bulkstat
  xfs: prevent swapext from operating on write-only files

* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  of/dma: fix build breakage in ppc4xx adma driver