- 01 May, 2019 30 commits
-
-
Igor Russkikh authored
Here we define and request an extra interrupt line, assign it on link isr handler and restructure abit aq_pci code to better support that. We also remove logic for using different timer intervals depending on link state, since thats now useless. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikita Danilov authored
We need this to schedule link interrupt handling and various service tasks. Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Define link interrupt handler Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Declare macroes and nic fields to support link interrupt handling Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yana Esina authored
Added support for hwmon api to fetch out chip temperature Signed-off-by: Yana Esina <yana.esina@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yana Esina authored
Ability to read the chip temperature from memory via hwmon interface Signed-off-by: Yana Esina <yana.esina@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
According to Neil who reported the issue leading to this workaround, the workaround is no longer needed since version 5.0. So let's remove it. This was the bug report leading to the workaround: https://bugzilla.kernel.org/show_bug.cgi?id=201081Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Neil MacLeod <neil@nmacleod.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: improve eri function handling This series aims at improving and simplifying the eri functions. No functional change intended. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Fortunately in one place there's a comment explaining what toggling this bit does. So let's create a helper for it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Add helpers rtl_eri_set_bits and rtl_eri_clear_bits to improve readability of the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
In basically all eri function calls the type argument is ERIAR_EXGMAC. Therefore make it the default. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrew Lunn says: ==================== Convert mv88e6060 to mdio device This patchset builds upon the previous patches to mv88e6060. It adds support for probing the switch as an MDIO device and then removes the legacy probe method. Since this is the last device supporting legacy probe, this allows legacy probe to be removed, originally planned to be removed in 4.17, but took a bit longer. This change to the mv88e6060 is more risky than the previous patchset. Some attempts to test it have been made, by hacking the driver to match on an mv88e6352 so that it probes. These changes are all about probe, so it is a reasonable test. But testing on a real mv88e6060 would be great. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Now that the code to support the legacy binding has been removed, remove the documentation for it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Now that all drivers can be probed using more traditional methods, remove the legacy probe code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Now that the driver can be probed as an mdio device, remove the legacy DSA platform device probing. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Probing DSA devices as platform devices has been superseded by using normal bus drivers. Add support for probing the mv88e6060 device as an mdio device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vladimir Oltean says: ==================== Improvements to DSA core VLAN manipulation In preparation of submitting the NXP SJA1105 driver, the Broadcom b53 and Mediatek mt7530 drivers have been found to apply some VLAN workarounds that are needed in the new driver as well. Therefore this patchset is mostly simply promoting the DSA driver workarounds for VLAN to the generic code. The b53 driver was applying a few workarounds in order to convince DSA that its vlan_filtering setting is not really per-port. This is now simply set by the driver via a DSA variable at probe time. The sja1105 driver will be a second user of this. The mt7530 was also keeping track of when the .port_vlan_filtering callback was being called. Remove the kept state from this driver and simplify dealing with vlan_filtering in the generic case. TODO: Find the best way to deal generically with the situation described below (discussion at https://lkml.org/lkml/2019/4/16/1355): > > +Segregating the switch ports in multiple bridges is supported (e.g. 2 + 2), but > > +all bridges should have the same level of VLAN awareness (either both have > > +``vlan_filtering`` 0, or both 1). Also an inevitable limitation of the fact > > +that VLAN awareness is global at the switch level is that once a bridge with > > +``vlan_filtering`` enslaves at least one switch port, the other un-bridged > > +ports are no longer available for standalone traffic termination. > > That is quite a limitation that I don't think I had fully grasped until > reading your different patches. Since enslaving ports into a bridge > comes after the network device was already made available for use, maybe > you should force the carrier down or something along those lines as soon > as a port is enslaved into a bridge with vlan_filtering=1 to make this > more predictable for the user? ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
This hides the need to perform a two-phase transaction and construct a switchdev_obj_port_vlan struct. Call graph (including a function that will be introduced in a follow-up patch) looks like this now (same for the *_vlan_del function): dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
While possible (and safe) to use the newly introduced dsa_port_is_vlan_filtering helper, fabricating a dsa_port pointer is a bit awkward, so simply retrieve this from the dsa_switch structure. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Since DSA has recently learned to treat better with drivers that set vlan_filtering_is_global, doing this is no longer required. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Even if VLAN filtering is global, DSA will call this callback once per each port. Drivers should not have to compare the global state with the requested change. So let DSA do it. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
This was recently introduced, so keeping state inside the driver is no longer necessary. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Since different types of hardware may or may not support this setting per-port, DSA keeps it either in dsa_switch or in dsa_port. While drivers may know the characteristics of their hardware and retrieve it from the correct place without the need of helpers, it is cumbersone to find out an unambigous answer from generic DSA code. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The current behavior is not as obvious as one would assume (which is that, if the driver set vlan_filtering_is_global = 1, then checking any dp->vlan_filtering would yield the same result). Only the ports which are actively enslaved into a bridge would have vlan_filtering set. This makes it tricky for drivers to check what the global state is. So fix this and make the struct dsa_switch hold this global setting. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The driver, recognizing that the .port_vlan_filtering callback was never coming after the port left its parent bridge, decided to take that duty in its own hands. DSA now takes care of this condition, so fix that. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
When ports are standalone (after they left the bridge), they should have no VLAN filtering semantics (they should pass all traffic to the CPU). Currently this is not true for switchdev drivers, because the bridge "forgets" to unset that. Normally one would think that doing this at the bridge layer would be a better idea, i.e. call br_vlan_filter_toggle() from br_del_if(), similar to how nbp_vlan_init() is called from br_add_if(). However what complicates that approach, and makes this one preferable, is the fact that for the bridge core, vlan_filtering is a per-bridge setting, whereas for switchdev/DSA it is per-port. Also there are switches where the setting is per the entire device, and unsetting vlan_filtering one by one, for each leaving port, would not be possible from the bridge core without a certain level of awareness. So do this in DSA and let drivers be unaware of it. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The DSA core is now able to do this check prior to calling the .port_vlan_filtering callback, so tell it that VLAN filtering is global for this particular hardware. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
On some switches, the action of whether to parse VLAN frame headers and use that information for ingress admission is configurable, but not per port. Such is the case for the Broadcom BCM53xx and the NXP SJA1105 families, for example. In that case, DSA can prevent the bridge core from trying to apply different VLAN filtering settings on net devices that belong to the same switch. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
This allows drivers to query the VLAN setting imposed by the bridge driver directly from DSA, instead of keeping their own state based on the .port_vlan_filtering callback. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Apr, 2019 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2019-04-30 1) A lot of work to remove indirections from the xfrm code. From Florian Westphal. 2) Support ESP offload in combination with gso partial. From Boris Pismenny. 3) Remove some duplicated code from vti4. From Jeremy Sowden. Please note that there is merge conflict between commit: 8742dc86 ("xfrm4: Fix uninitialized memory read in _decode_session4") from the ipsec tree and commit: c53ac41e ("xfrm: remove decode_session indirection from afinfo_policy") from the ipsec-next tree. The merge conflict will appear when those trees get merged during the merge window. The conflict can be solved as it is done in linux-next: https://lkml.org/lkml/2019/4/25/1207 Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
The KSZ8081 PHY has a factory test mode which is set at the de-assertion of the reset line based on the RXER (KSZ8081RNA/RND) or TXC (KSZ8081MNX/RNB) pin. If a pull-down is missing, or if the pin has a pull-up, the factory test mode should be cleared by manually writing a 0 (according to the datasheet). This patch makes sure this factory test bit is cleared in config_init(). Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Apr, 2019 8 commits
-
-
Heiner Kallweit authored
Considering that in polling mode each link drop will be latched, settings can't have changed if link was up and is up. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrew Lunn says: ==================== Make DSA tag drivers kernel modules Historically, DSA tag drivers have been compiled into the kernel as part of the DSA core. With the growing number of tag drivers, it makes sense to allow this driver code to be compiled as a module, and loaded on demand. v2 -- Move name to end of structure, keeping the hot entries at the beginning. More tag protocol to end of structure to keep hot members at the beginning. Fix indent of #endif Rewrite to move list pointer into a new structure void functions, since there cannot be errors Fix fall-through comment Reorder patch for unused symbols to before tag drivers can be modules tab/space cleanup Help text wording NET_DSA_TAG_BRCM_COMMON and NET_DSA_TAG_KZS_COMMON hidden v3 -- boilerplate: Move kdoc next to macro boilerplate: Fix THIS_MODULE indentation Kconfig: More tabification Kconfig: Punctuation v4 -- Cover note {H}istorically Kconfig: trailer ==================== Tested-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Make the CONFIG symbols tristate and add help text. The broadcom and Microchip KSZ tag drivers support two different tagging protocols in one driver. Add a configuration option for the drivers, and then options to select the protocol. Create a submenu for the tagging drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2: tab/space cleanup Help text wording NET_DSA_TAG_BRCM_COMMON and NET_DSA_TAG_KZS_COMMON hidden v3: More tabification Punctuation v4: trailler->trailer Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
It is possible that the driver is compiled with both CONFIG_NET_DSA_TAG_BRCM and CONFIG_NET_DSA_TAG_BRCM_PREPEND disabled. This results in warnings about unused symbols. Add some conditional compilation to avoid this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> v2 Reorder patch to before tag drivers can be modules Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Now that tag drivers dynamically register, we don't need the static table. Remove it. This also means the tag driver structures can be made static. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Implement the _get and _put functions to make use of the list of tag drivers. Also, trigger the loading of the module, based on the alias information. The _get function takes a reference on the tag driver, so it cannot be unloaded, and the _put function releases the reference. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> v2: Make tag_driver_register void Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
When a DSA switch driver is unloaded, the lock on the tag driver should be released so the module can be unloaded. Add the needed calls, but leave the actual release code as a stub. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> v2 Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
dsa_resolve_tag_protocol() is used to find the tagging driver needed by a switch driver. When the tagging drivers become modules, it will be necassary to take a reference on the module to prevent it being unloaded. So rename this function to _get() to indicate it has some locking properties. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-