- 16 Jul, 2011 13 commits
-
-
Fry, Donald H authored
Not needed since the driver split. Signed-off-by:
Don Fry <donald.h.fry@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com>
-
Wey-Yi Guy authored
Define bitmap for calibration Signed-off-by: -
Hsu, Kenny authored
The driver should take the ownership of the uCode as default setting for later operations after interface up. Signed-off-by:
Kenny Hsu <kenny.hsu@intel.com> Signed-off-by:
-
Johannes Berg authored
The first assignment of TX_CMD_FLG_SEQ_CTL_MSK for ack-expected mgmt frames is overwritten later in the function, so it's useless. Also, probe response frames, BACK request and others there are mutually exclusive so can be moved into an else branch. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Those comments were missed in a previous commit. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
Modify the comments for iwl_cfg, no functional changes Signed-off-by: -
Wey-Yi Guy authored
Another clean up work after driver split Signed-off-by: -
Wey-Yi Guy authored
After driver split, no need to make the code so complex Signed-off-by: -
Wey-Yi Guy authored
Most of the functions in iwl-agn-hcmd are move to other files, no point to keep the file anymore. Signed-off-by: -
Emmanuel Grumbach authored
The upper layer receives a pointer to an iwl_rx_mem_buffer. I would prefer the upper layer to receive a pointer to an iwl_rx_packet, but this is impossible since the Rx path needs to add the address of the page to the skb. I may find a solution later. All the pre_rx_handler and notification code has been moved to the upper layer. Signed-off-by:
-
Emmanuel Grumbach authored
Since all the irq / tasklet is now handled in the transport layer, it should give an API to ensure that all the irq / tasklet have finished running. This will allow the upper layer to release all its resources. Signed-off-by:
-
Emmanuel Grumbach authored
PCIe doesn't provide any ISR registration API, whereas other buses do. Hence, we need to move the tasklet and irq to the transport layer to allow this flexibility. Signed-off-by:
-
Emmanuel Grumbach authored
Split the Tx datapath in two parts: * the first deals with the Tx cmd composition * the second attaches the skb + Tx cmd to the queues Signed-off-by:
-
- 15 Jul, 2011 11 commits
-
-
Johannes Berg authored
When suspending with all netdevs down, the device is stopped but we still call a number of driver callbacks that the driver might not expect. The same happens during resume, we might call a few callbacks without starting the driver. Fix this by checking open_count around more things and exiting quickly if it is 0. Also, while at this I noticed that the coverage class isn't reprogrammed after resume, so add that. Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Pavel Roskin authored
Signed-off-by:
Pavel Roskin <proski@gnu.org> Acked-By:
christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Bing Zhao authored
Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Johannes Berg authored
ieee80211_iter_keys() currently returns keys in the backward order they were installed in, which is a bit confusing. Add them to the tail of the key list to make sure iterations go in the same order that keys were originally installed in. Signed-off-by:
-
Johannes Berg authored
When the driver wants to pre-program the TKIP RX phase 1 key, it needs to be able to obtain it for the peer's TA. Add API to allow it to generate it. The generation uses a dummy on-stack context since it doesn't know the RX queue. Signed-off-by:
-
Felix Fietkau authored
For unicast the hardware sometimes reports MIC errors even though the frame that it received actually contains a valid MIC - on some chips this can happen frequently enough to trigger TKIP countermeasures. Fix this issue by not reporting MIC errors for unicast frames with a valid key, letting mac80211 validate the MIC instead. Additionally, strip the MIC for all frames that the hardware considers valid to avoid wasting CPU cycles re-validating it. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Pavel Roskin authored
Eliminate spaces before tabs. Eliminate typedefs. Add spaces around operators. Signed-off-by:
-
Yogesh Ashok Powar authored
Following oops was seen on SMP machine >BUG: unable to handle kernel NULL pointer dereference at 00000012 >IP: [<f8c56691>] mwl8k_tx+0x20e/0x561 [mwl8k] >*pde = 00000000 >Oops: 0000 [#1] SMP >Modules linked in: mwl8k mac80211 cfg80211 [last unloaded: cfg80211] As ieee80211_tx_info->control.sta may be NULL during ->tx call, avoiding sta dereference in such scenario with the following patch. Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
-
Luciano Coelho authored
Some chips may support different lengths of user-supplied IEs with a single scheduled scan command than with a single normal scan command. To support this, this patch creates a separate hardware description element that describes the maximum size of user-supplied information element data supported in scheduled scans. Signed-off-by:
Luciano Coelho <coelho@ti.com> Signed-off-by:
-
Luciano Coelho authored
Some chips can scan more SSIDs with a single scheduled scan command than with a single normal scan command (eg. wl12xx chips). To support this, this patch creates a separate hardware description element that describes the amount of SSIDs supported in scheduled scans. Signed-off-by:
-
Johannes Berg authored
Since we now have the necessary API in place to support GTK rekeying, applications will need to know whether it is supported by a device. Add a pseudo-trigger that is used only to advertise that capability. Also, add some new triggers that match what iwlagn devices can do. Signed-off-by:
-
- 13 Jul, 2011 14 commits
-
-
Johannes Berg authored
In WoWLAN, devices may use crypto keys for TX/RX and could also implement GTK rekeying. If the driver isn't able to retrieve replay counters and similar information from the device upon resume, or if the device isn't responsive due to platform issues, it isn't safe to keep the connection up as GTK rekey messages from during the sleep time could be replayed against it. The only protection against that is disconnecting from the AP. Modifying mac80211 to do that while it is resuming would be very complex and invasive in the case that the driver requires a reconfig, so do it after it has resumed completely. In that case, however, packets might be replayed since it can then only happen after TX/RX are up again, so mark keys for interfaces that need to disconnect as "tainted" and drop all packets that are sent or received with those keys. Signed-off-by:
-
Mohammed Shafi Shajakhan authored
is_valid_ether_addr itself checks for is_zero_ether_addr Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Yogesh Ashok Powar authored
Currently, setting only legacy bitrates on 2.4GHz band are supported. Mode 802.11b/g/bg is enabled based on bitrates selection. If only CCK bitrates selected then 802.11b mode is enabled. If only OFDM bitrates are selected then 802.11g mode is enabled. For both: CCK and OFDM rates 802.11bg mixed mode is enabled. Signed-off-by:
-
Felix Fietkau authored
Instead of using ieee80211_stop_queue, check the configured tx queue limit before calling ieee80211_get_buffered_bc. Signed-off-by:
-
Felix Fietkau authored
While 32 KHz sleep clock might provide some power saving benefits, it is also a major source of stability issues, on OpenWrt it produced some reproducible data bus errors on register accesses on several different MIPS platforms. All the Atheros drivers that I can find do not enable this feature, so it makes sense to leave it disabled in ath5k as well. Signed-off-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
-
Felix Fietkau authored
enabling the sleep clock alters the AR5K_USEC_32 field, but disabling it didn't restore it. Signed-off-by:
-
Felix Fietkau authored
During scans the full calibration usually does not make much sense, PAPD probing and IQ calibration should be deferred until there is enough time to complete them. Adding 100 ms to the initial full calibration delay should be enough to do this. Signed-off-by:
-
Felix Fietkau authored
Fixes a division by zero when setting distance before activating the device for the first time. Signed-off-by:
-
Felix Fietkau authored
AR2413 uses the same reference clock as AR5413 Signed-off-by:
-
Felix Fietkau authored
Might fix some stability issues on newer chips Signed-off-by:
-
Felix Fietkau authored
rfgain probe is only necessary for OFDM operation on AR5111 and AR5112. Signed-off-by:
-
Senthil Balasubramanian authored
Decryping frames on key_miss handling shouldn't be done for Michael MIC failed frames as h/w would have already decrypted such frames successfully anyway. Also leaving CRC and PHY error(where the frame is going to be dropped anyway), we are left to prcoess Decrypt error for which s/w decrypt is selected anway and so having key_miss as a separate check doesn't serve anything. So making key_miss handling mutually exlusive with other RX status handling makes much more sense. This patch addresses an issue with STA not reporting MIC failure events resulting in STA being disconnected immediately. Cc: stable@kernel.org Signed-off-by:
Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by:
-
Joe Perches authored
Multiple quoted strings are concatenated without comma separators. Make the array const while there. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
-
Joe Perches authored
Multiple quoted strings are concatenated without comma separators. Signed-off-by:
-
- 11 Jul, 2011 2 commits
-
-
Wey-Yi Guy authored
Fix the compile warning cause by [IWL_TM_ATTR_MAX - 1] Reported-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Signed-off-by:
-
