- 22 Oct, 2010 1 commit
-
-
Jarod Wilson authored
Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 21 Oct, 2010 39 commits
-
-
Jean-François Moine authored
The errors were found by checkpatch.pl. Most fixes are: - remove spaces followed by TAB(s), - split lines greater than 80 characters, - move most '{'s from start of line to end of previous line. (Some '{'s at start of line remain when the '}'s are on the same line) Signed-off-by:Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Németh Márton authored
The PO2030N sensor chip found in hama AC-150 webcam supports horizontal and vertical flipping the image by hardware. Signed-off-by:
-
Németh Márton authored
The number 0xdd is used for marking delay init sequence steps. Replace 0xdd values only if the meaning is delay. Signed-off-by:
-
Jean-François Moine authored
The bug was introduced by commit d5aa3856 removing the probe sequence of hv7131r with bridge sn9c120 and so, letting the sensor inactive. Signed-off-by:
-
Jean-François Moine authored
The bug was introduced by commit 23a98274 applying values of sensor sp80708 to sensors hv7131r and mi0360. Signed-off-by:
-
Ruslan Pisarev authored
This is a patch to the tm6000.h file that fixed up a macros and comment error found by the checkpatch.pl tools. Signed-off-by:
Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
Ruslan Pisarev authored
This is a patch to the tm6000-cards.c file that fixed up a space error found by the checkpatch.pl tools. Signed-off-by:
-
Ruslan Pisarev authored
This is a patch to the tm6000-cards.c tm6000-core.c tm6000-dvb.c tm6000-i2c.c tm6000-input.c tm6000-regs.h tm6000-stds.c tm6000-usb-isoc.h tm6000.h files that fixed up a comments warnings found by the checkpatch.pl tools. Signed-off-by:
-
Ruslan Pisarev authored
This is a patch to the tm6000-video.c file that fixed up a braces, tabs, comments and space Errors and Warnings found by the checkpatch.pl tools. [mchehab@redhat.com: some changes didn't apply as it were based to an older version, so used patch -f to apply only the changes that are OK] Signed-off-by:
-
Ruslan Pisarev authored
This is a patch to the tm6000-i2c.c file that fixed "ERROR: do not initialise statics to 0 or NULL" found by the checkpatch.pl tools. Signed-off-by:
-
Jonathan Corbet authored
Add a driver for the video capture port on VIA integrated chipsets. This version has a remaining OLPCism or two and expects to be talking to an ov7670; those can be improved as the need arises. This work was supported by the One Laptop Per Child project. Thanks to Laurent Pinchart for a number of useful comments. Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Daniel Drake authored
The QVGA mode has a green horizontal line on the left hand side, and a red (or sometimes blue) vertical line at the bottom. Tweak the visible area to remove them. Thanks to Mauro for explaining how to fix this. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
-
Derek Kelly authored
This patch changes the name of the av7110 driver from the generic "dvb" to "av7110", to be descriptive of the driver. I've included Oliver Endriss's ack from the original post, which contained a mangled patch. The content of the patch is unchanged. Signed-off-by:
Derek Kelly <user.vdr@gmail.com> Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Michel Garnier authored
Signed-off-by:
Michel Garnier <catimimi@orange.fr> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
In file included from drivers/media/video/cx231xx/cx231xx-audio.c:40: drivers/media/video/cx231xx/cx231xx.h:559: error: field ‘frontends’ has incomplete type make[4]: ** [drivers/media/video/cx231xx/cx231xx-audio.o] Erro 1 make[3]: ** [drivers/media/video/cx231xx] Erro 2 make[2]: ** [drivers/media/video] Erro 2 make[1]: ** [drivers/media] Erro 2 make: ** [drivers] Erro 2 Reported-by:
Marcio Araujo Alves <froooozen@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Polaris design uses MCE support. Instead of reinventing the wheel, just let mceusb handle the remote controller. Acked-by:
Jarod Wilson <jarod@redhat.com> Acked-by:
Sri Devi <Srinivasa.Deevi@conexant.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Interface 0 is used by IR. The current driver starts initializing on it, finishing on interface 6. Change the logic to only handle interface 1. This allows another driver (mceusb) to take care of the IR interface. Reviewed-by:
-
Mauro Carvalho Chehab authored
For now, it adds support for Conexant EVK and for Pixelview. We should probably find a better way to specify all Conexant Polaris devices, to avoid needing to repeat this setup on both mceusb and cx231xx-cards. Reviewed-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
This avoids a race condition Signed-off-by: -
Mauro Carvalho Chehab authored
Those locking issues affect tvtime, causing a kernel oops/panic, due to a race condition. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead, use core lock handling. Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/cx25840/cx25840-core.c: In function ‘cx25840_s_frequency’: drivers/media/video/cx25840/cx25840-core.c:1563: warning: unused variable ‘state’ Signed-off-by: -
Sylwester Nawrocki authored
Signed-off-by: -
Maxim Levitsky authored
This is just unnessesary, and now more logical Also a lot of refactoring Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
-
Maxim Levitsky authored
Signed-off-by:
-
Maxim Levitsky authored
Add new event types for timeout & carrier report Move timeout handling from ir_raw_event_store_with_filter to ir-lirc-codec, where it is really needed. Now lirc bridge ensures proper gap handling. Extend lirc bridge for carrier & timeout reports Note: all new ir_raw_event variables now should be initialized like that: DEFINE_IR_RAW_EVENT(ev); To clean an existing event, use init_ir_raw_event(&ev); Signed-off-by:
-
Derek Kelly authored
This patches adjusts the tuner delay to be longer in response to several users experiencing tuner timeouts. This change fixes that problem and allows those users to be able to tune. Signed-off-by:
-
Derek Kelly authored
This patch updates the name of the dvb-usb-gp8psk driver from "Genpix 8psk-to-USB2 DVB-S" to "Genpix DVB-S". The old name doesn't reflect newer devices such as the Skywalker line which also user this driver. Signed-off-by:
-
Sven Barth authored
This adds support for the AUX_PLL in cx2583x chips which is available in those although the audio part of the chip is not. The AUX_PLL is used at least by Terratec in their Grabster AV400 device. Signed-off-by:
Sven Barth <pascaldragon@googlemail.com> Acked-by:
Mike Isely <isely@pobox.com> Reviewed-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Stephen Rothwell authored
Fixes these build errors and warnings: drivers/media/video/cx231xx/cx231xx-417.c: In function 'cx231xx_load_firmware': drivers/media/video/cx231xx/cx231xx-417.c:943: error: implicit declaration of function 'vmalloc' drivers/media/video/cx231xx/cx231xx-417.c:943: warning: cast to pointer from integer of different size drivers/media/video/cx231xx/cx231xx-417.c:950: warning: cast to pointer from integer of different size drivers/media/video/cx231xx/cx231xx-417.c:1039: error: implicit declaration of function 'vfree' Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au>
-
Hans Verkuil authored
The switch to the new control framework caused a regression where the audio was no longer unmuted after the carrier scan finished. The original code attempted to set the volume control to its current value in order to have the set-volume control code to be called that handles the volume and muting. However, the framework will not call that code unless the new volume value is different from the old. Instead we now call msp_s_ctrl directly. It is a bit of a hack: we really need a v4l2_ctrl_refresh_ctrl function for this (or something along those lines). Thanks to Andy Walls for bisecting this and to Shane Shrybman for reporting it! Reported-by:
Shane Shrybman <shrybman@teksavvy.com> Thanks-to: Andy Walls <awalls@md.metrocast.net> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Jean-François Moine authored
When audio is present, some alternate settings were skipped. This prevented some webcams to work, especially when bulk transfer was used. This patch permits to use the last or only alternate setting. Reported-by:
Antonio Ospite <ospite@studenti.unina.it> Tested-by:
-
Hans Verkuil authored
Siliconfile SR030PC30 VGA camera fails to compile with this error: drivers/media/video/sr030pc30.c: In function ‘sr030pc30_probe’: drivers/media/video/sr030pc30.c:834: error: implicit declaration of function ‘kzalloc’ drivers/media/video/sr030pc30.c:834: warning: assignment makes pointer from integer without a cast drivers/media/video/sr030pc30.c: In function ‘sr030pc30_remove’: drivers/media/video/sr030pc30.c:858: error: implicit declaration of function ‘kfree’ Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
Janne Grunau <j@jannau.net> Signed-off-by:
-
Alan Young authored
Based on USB traces of the windows driver. Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
-
