- 12 Oct, 2007 40 commits
-
-
Seokmann Ju authored
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Original code, incorrectly passed the address-of a pointer rather than the pointer value itself. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Also remove legacy '/proc' name during OS_DEVICE_NAME registration. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Ravi Anand authored
Where the DPC logic would get jammed into continuously reloging-into a port. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
There's no need to reset the RISC prior to pausing. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Seokmann Ju authored
Additional cleanups and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Joe Carnuccio authored
Additional cleanups and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Newer ISPs support a mechanism to read and write flash-memory via the firmware LOAD/DUMP memory mailbox command routines. When supported, utilizing these mechanisms significantly reduces overall access times. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Add IO-base-window accessor functions. Merge duplicate RISC-pause and soft-reset code segments. Drop 'eye-watering' __iomem casting. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
One of the intents of the block prep function was to allow ULDs to use it for preprocessing. The original SCSI model was to have a single prep function and add a pointer indirect filter to build the necessary commands. This patch reverses that, does away with the init_command field of the scsi_driver structure and makes ULDs attach directly to the prep function instead. The value is really that it allows us to begin to separate the ULDs from the SCSI mid layer (as long as they don't use any core functions---which is hard at the moment---a ULD doesn't even need SCSI to bind). Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
David Woodhouse authored
If you build a multiplatform kernel for iSeries and pSeries, with ibmvscsic support, the resulting client doesn't work on iSeries. This fixes that, using the appropriate low-level operations for the machine detected at runtime. [jejb: fixed up rejections around the srp transport patch] Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Alan Cox authored
(and pointed out by several people) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Alan Cox authored
So its ancient, its crap, but it kept showing up in my scans for stuff that wanted fixing... - Redo the proc code to be far cleaner - Clean various return (0) type constructs - Use cpu_relax() The various waits ought to time out but thats another issue and probably not worth solving. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Masatake YAMATO authored
In scsi module I've found some inconsistency between variable type used in module_param_named and type passed to module_param_named as an argument. Especially the inconsistency of `max_scsi_luns' parameter is a bit serious because the description text says "last scsi LUN (should be between 1 and 2^32-1)". Signed-off-by: Masatake YAMATO <jet@gyve.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Boaz Harrosh authored
- Convert ide-scsi to the new data accessors and cleanup the !use_sg code paths. In old code the driver was trying to translate narrow commands, if received, to wide commands. This code path still assumed scsi_cmnd->request_buffer is a linear char pointer. This means that this driver was broken since 2.6.17. As suggested by Christoph Hellwig I set use_10_for_rw = 1; and use_10_for_ms = 1; for this device and completely killed the translation. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Michael Reed authored
A BUSY status returned on a write request results in a stale residual being returned when the write ultimately successfully completes. This can be reproduced as follows: 1) issue immediate mode rewind to scsi tape drive 2) issue write request The tape drive returns busy. The low level driver detects underrun and sets the residual into the scsi command. The low level driver responds with (DID_OK << 16) | scsi_status. scsi_status is 8, hence status_byte(result) == 4, i.e., BUSY. scsi_softirq_done() calls scsi_decide_disposition() which returns ADD_TO_MLQUEUE. scsi_softirq_done() then calls scsi_queue_insert() which, on the way to resubmitting the request to the driver, calls scsi_init_cmd_errh(). The attached patch modifies scsi_init_cmd_errh() to clear the resid field. This prevents a "stale" residual from being returned when the scsi command finally completes without a BUSY status. Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Eric Moore authored
Mailing list changed. The former list at mpt_linux_developer@lsi.com is no longer in service. Please use the new email provided listed in this patch. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Eric Moore authored
bump version Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Eric Moore authored
Adding 949X, 949E, and 1078 to Kconfig. Adding "depends on FUSION" required in the FUSION_LOGGING section, and fixing a spelling error. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Eric Moore authored
Some other vender has concerns over this copyright, and Dell has approved removing it. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Eric Moore authored
Cleaning up code by accesing the ioc pointer directly instead of via hd->ioc. In the future, most data members of struct MPT_SCSI_HOST will be either deleted or moved to struct MPT_ADAPTER. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Eric Moore authored
common naming of vdevice through out driver Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Eric Moore authored
cleaning up some white space that was introduce in a recent "cb_idx int to u8" patch. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Eric Moore authored
Standardize all prints using common MYIOC_s_XXX_FMT macro defined in mptbase.h. Currently the driver uses several different methods to display info, where in some cases the "controller name" generating the printk is not provided. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
CC [M] drivers/scsi/arcmsr/arcmsr_hba.o drivers/scsi/arcmsr/arcmsr_attr.c:186: warning: initialization from incompatible pointer type drivers/scsi/arcmsr/arcmsr_attr.c:196: warning: initialization from incompatible pointer type drivers/scsi/arcmsr/arcmsr_attr.c:206: warning: initialization from incompatible pointer type drivers/scsi/arcmsr/arcmsr_hba.c: In function 'arcmsr_alloc_ccb_pool': drivers/scsi/arcmsr/arcmsr_hba.c:329: warning: assignment from incompatible pointer type drivers/scsi/arcmsr/arcmsr_hba.c: At top level: drivers/scsi/arcmsr/arcmsr_hba.c:101: warning: 'arcmsr_pci_error_detected' declared 'static' but never defined drivers/scsi/arcmsr/arcmsr_hba.c:102: warning: 'arcmsr_pci_slot_reset' declared 'static' but never defined The majority being incorrect casting or the fact that binary attributes now take an additional argument. Cc: Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Nick Cheng authored
Description: ** support ARC1200/1201/1202 SATA RAID adapter, which is named ACB_ADAPTER_TYPE_B ** modify the arcmsr_pci_slot_reset function ** modify the arcmsr_pci_ers_disconnect_forepart function ** modify the arcmsr_pci_ers_need_reset_forepart function Signed-off-by: Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Kay Sievers authored
This removes the unused sysfs attribute overwriting logic for most of the attributes, and plugs them into the driver core default attribute creation. Without this patch, at the time of the events for the SCSI LUN's, there will be no sysfs files, because their creation is delayed until the sd driver has spun up the disks, which might take several seconds. It is the last WAIT_FOR_SYSFS rule in the default udev setup which can be removed with this change. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
Follow the example of some other drivers by defining DRV_NAME to be "advansys". Prevents spelling mistakes. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
- Delete comments relating to the previous structure of the driver. I have no intention of honouring them ;-) - Reformat comments > 80 columns - Remove now-obsolete comments from advansys_interrupt - Change adv_get_sglist() from do {} while (1) to for (;;) - Return void from AscInitQLinkVar() - Take out a level of indentation in adv_get_sglist() - Reduce indentation level of AscAsyncFix() - Remove unused macros - Refactor AscSendScsiQueue slightly Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
- Replace ASC_ASSERT() with BUG_ON(). In a few places, get rid of the assertion altogether -- the ensuing crash will tell us all we need to know. Use BUG() where it fits better than BUG_ON(). Also fix a fencepost error in advansys_proc_info(). - Replace DvcSleepMilliSecond with mdelay. Despite its name using 'sleep', the implementation was a delay. I've marked some places with XXX where we should probably be using msleep instead. They need to be audited to be sure we can sleep in that context. - Replace DvcDelayMicroSecond with udelay. - Replace DvcDelayNanoSecond with udelay too. All callers were multiples of 1000. - Remove DvcEnterCritical and DvcLeaveCritical. These functions are no-ops, and as the comments said, the spinlock protects the critical sections. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
AscExeScsiQueue() has one caller, and it passes the address of a variable; this cannot ever be NULL. This is the only place that ever sets ASCQ_ERR_SCSIQ_NULL_PTR, so delete that error code too, as well as several other unused ASCQ_ERR codes. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
The SCSI midlayer won't send commands greater than ->max_cmd_len. So the checks on length in asc_build_req and adv_build_req are obsolete and can be deleted, but also we have to set the max_cmd_len in advansys_board_found(). Also move the length definitions together, and write a helpful comment. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
Move as much as possible outside the critical section in queuecommand, eg: - Set the scsi_done field before acquiring the lock - Call asc_scsi_done after dropping the lock Also remove a comment suggesting we should enable interrupts (now we do) and do some minor reformatting for readability. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
The `active' list was used in the reset handler -- but the midlayer guarantees that list is empty by the time the reset handler is invoked. It was also checked in the interrupt routines to be sure that this command belonged to this board, but we don't need to check that either. We can then delete the asc_prt_target_stats() function as it will never print anything, along with asc_enqueue(), asc_dequeue_list(), asc_rmqueue(), asc_scsi_done_list(), struct asc_queue, ASC_QUEUE_EMPTY, ASC_TID_ALL, ASC_FRONT, ASC_BACK, and all the REQ* macros. Also remove this item from the todo list. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
- Move the guts of asc_scsi_done_list() into a new function, asc_scsi_done. - Call asc_scsi_done() in asc_isr_callback() and adv_isr_callback(). The comment was wrong; scsi_done cannot enable interrupts. - All other places which queued an scp on the done list are error paths for queuecommand, and so we can just call asc_scsi_done() in queuecommand if we receive an error. - We no longer need to keep a list of done requests in advansys_interrupt Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
The midlayer guarantees it won't call ->queuecommand for a host which is handling a reset condition. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
If the adapter is busy, return the request to the midlayer rather than queueing it in the driver. asc_execute_queue() and asc_dequeue() become unused, and we don't need to print out stats on the waiting queue any more. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-