- 16 Mar, 2011 1 commit
-
-
j223yang@asset.uwaterloo.ca authored
'req' is dereferenced before checked for NULL. The patch simply removes the check. Signed-off-by: Jinqiu Yang<crindy646@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 Mar, 2011 1 commit
-
-
Stephen Rothwell authored
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 14 Mar, 2011 1 commit
-
-
Trond Myklebust authored
Commit 45a52a02 (NFS move nfs_client initialization into nfs_get_client) introduces a new warning in fs/nfs/idmap.c: ‘struct rpc_timeout’ declared inside parameter list Fix it by adding a forward declaration for the struct rpc_timeout in include/linux/nfs_xdr.h Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 Mar, 2011 37 commits
-
-
Rob Landley authored
Factor out some cut-and-paste code in options parsing. Saves about 800 bytes on x86-64. Signed-off-by: Rob Landley <rlandley@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Rob Landley authored
Eliminate two mostly duplicate functions (nfs_parse_simple_hostname() and nfs_parse_protected_hostname()) and instead just make the calling function (nfs_parse_devname()) do everything. Signed-off-by: Rob Landley <rlandley@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Konstantin Khlebnikov authored
Account NFS direct-io reads and writes into Task I/O Accounting. Do it before complition to handle aio. NFS have unusual direct-io implementation, thus accounting in generic code does not work. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Kevin Coffman authored
Make the value in gm_upcall_enctypes just the enctype values. This allows the values to be used more easily elsewhere. Signed-off-by: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Tom Tucker authored
When the rpc_memreg_strategy is 5, FRMR are used to map RPC data. This mode uses an FRMR to map the RPC data, then invalidates (i.e. unregisers) the data in xprt_rdma_free. These FRMR are used across connections on the same mount, i.e. if the connection goes away on an idle timeout and reconnects later, the FRMR are not destroyed and recreated. This creates a problem for transport errors because the WR that invalidate an FRMR may be flushed (i.e. fail) leaving the FRMR valid. When the FRMR is later used to map an RPC it will fail, tearing down the transport and starting over. Over time, more and more of the FRMR pool end up in the wrong state resulting in seemingly random disconnects. This fix keeps track of the FRMR state explicitly by setting it's state based on the successful completion of a reg/inv WR. If the FRMR is ever used and found to be in the wrong state, an invalidate WR is prepended, re-syncing the FRMR state and avoiding the connection loss. Signed-off-by: Tom Tucker <tom@ogc.us> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Tom Tucker authored
The RPCRDMA marshalling logic assumed that xdr->page_base was an offset into the first page of xdr->page_list. It is in fact an offset into the xdr->page_list itself, that is, it selects the first page in the page_list and the offset into that page. The symptom depended in part on the rpc_memreg_strategy, if it was FRMR, or some other one-shot mapping mode, the connection would get torn down on a base and bounds error. When the badly marshalled RPC was retransmitted it would reconnect, get the error, and tear down the connection again in a loop forever. This resulted in a hung-mount. For the other modes, it would result in silent data corruption. This bug is most easily reproduced by writing more data than the filesystem has space for. This fix corrects the page_base assumption and otherwise simplifies the iov mapping logic. Signed-off-by: Tom Tucker <tom@ogc.us> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
The new behaviour is enabled using the new module parameter 'nfs4_disable_idmapping'. Note that if the server rejects an unmapped uid or gid, then the client will automatically switch back to using the idmapper. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
This will be required in order to switch uid/gid mapping back on if the admin has tried to disable it. Note that we also propagate NFS4ERR_BADNAME at the same time, in order to work around a Linux server bug. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
...instead of the nfs_client. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Benny Halevy authored
Allowing stripe_unit==0 causes the client to crash later on when dividing by zero. Reported-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Now that we have access to the pointer, clear it immediately after the put, instead of in caller. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
This will make it possible to clear the lseg pointer in the same function as it is put, instead of in the caller nfs_pageio_doio(). Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Allows the pnfs filelayout driver to write to the data servers. Note that COMMIT to data servers will be implemented in a future patch. To avoid improper behavior, for the moment any WRITE to a data server that would also require a COMMIT to the data server is sent NFS_FILE_SYNC. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Any WRITE compound directed to a data server needs to have the GETATTR calls suppressed. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
We grab the lseg sent in from the doio function and attach it to each struct nfs_write_data created. This is how the lseg will be sent to the layout driver. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Add callback that pnfs layout driver can use to do its own handling of data server WRITE response. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Reorder nfs_write_rpcsetup, preparing for a pnfs entry point. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
If a data server is unavailable, go through MDS. Mark the deviceid containing the data server as a negative cache entry. Do not try to connect to any data server on a deviceid marked as a negative cache entry. Mark any layout that tries to use the marked deviceid as failed. Inodes with a layout marked as fails will not use the layout for I/O, and will not perform any more layoutgets. Inodes without a layout will still do layoutget, but the layout will get marked immediately. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Christoph Hellwig authored
No need for generic cache with only one user. Keep a simple hash of deviceids in the filelayout driver. Signed-off-by: Christoph Hellwig <hch@infradead.org> Acked-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Use our own async error handler. Mark the layout as failed and retry i/o through the MDS on specified errors. Update the mds_offset in nfs_readpage_retry so that a failed short-read retry to a DS gets correctly resent through the MDS. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Attempt a pNFS file layout read by setting up the nfs_read_data struct and calling nfs_initiate_read with the data server rpc client and the filelayout rpc call ops. Error handling is implemented in a subsequent patch. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Tested-by: Guo Mingyang <guomingyang@nrchpc.ac.cn> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Prepare for filelayout_read_pagelist with helper functions that find the correct data server, filehandle, and offset. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Tigran Mkrtchyan <tigran@anahit.desy.de> Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Introduce a data server set_client and init session following the nfs4_set_client and nfs4_init_session convention. Once a new nfs_client is on the nfs_client_list, the nfs_client cl_cons_state serializes access to creating an nfs_client struct with matching properties. Use the new nfs_get_client() that initializes new clients. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Separate the rpc run portion of nfs_read_rpcsetup into a new function nfs_initiate_read that is called for normal NFS I/O. Add a pNFS read_pagelist function that is called instead of nfs_intitate_read for pNFS reads. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Move the pnfs_update_layout call location to nfs_pageio_do_add_request(). Grab the lseg sent in the doio function to nfs_read_rpcsetup and attach it to each nfs_read_data so it can be sent to the layout driver. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Add a pg_test layout driver hook which is used to avoid coelescing I/O across layout stripes. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Prepare put_lseg and get_lseg to be called from the pNFS I/O code. Pull common code from pnfs_lseg_locked to call from pnfs_lseg. Inline pnfs_lseg_locked into it's only caller. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
The DS only role cannot be used to mount. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Data servers cannot send nfs4_proc_get_lease_time. but still need to setup state renewal. Add the NFS_CS_CHECK_LEASE_TIME bit to indicate if the lease time can be checked. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Data servers not sharing a session with the mount MDS always have an empty cl_superblocks list. Replace the cl_superblocks empty list check to see if it is time to shut down renewd with the NFS_CS_STOP_RENEW bit which is not set by such a data server. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Data servers require a zero stateid seqid, and there is no advantage to not doing the same for all NFSv4.1 Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Now nfs_get_client returns an nfs_client ready to be used no matter if it was found or created. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-