- 26 Jun, 2013 24 commits
-
-
Vijaya Mohan Guvva authored
This patch includes changes to get FC HBA feature Forward Error Correction (FEC) (enabled at 16Gig speed) status from firmware and to return to brocade HBA management utility. Signed-off-by:
Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vijaya Mohan Guvva authored
This patch includes changes to 1) Enable/disable fc credit recovery on Brocade FC adapter port operating at max supported speed. 2) Get credit recovery status and stats related to credit loss and recovered credits Signed-off-by:
-
Sergei Shtylyov authored
The 'ctl' field of the 'struct ata_taskfile' is not really dual purpose, i.e. it is not intended for storing the alternate status register (which is mapped at the same address in the legacy IDE controllers) in the qc_fill_rtf() method. No other 'libata' driver except 'drivers/scsi/ipr.c' stores the alternate status register's value in the 'ctl' field of 'qc->result_tf', hence this driver should not do this as well... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
wenxiong@linux.vnet.ibm.com authored
When enable lockdep, seeing "possible irq lock inversion dependency detected" error. This patch fixes the issue. Signed-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by:
-
Karen Xie authored
Signed-off-by:
Karen Xie <kxie@chelsio.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Ben Hutchings authored
Commit 39c60a09 '[SCSI] sd: fix array cache flushing bug causing performance problems' added temp as a pointer to "temporary " and used sizeof(temp) - 1 as its length. But sizeof(temp) is the size of the pointer, not the size of the string constant. Change temp to a static array so that sizeof() does what was intended. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org Signed-off-by:
-
Jakob Normark authored
This patch fixes two cppcheck errors in drivers/scsi/bfa/bfad_im.c [jejb: correct strlcpy fix] Signed-off-by:
Jakob Normark <jakobnormark@gmail.com> Acked-by:
-
- 25 Jun, 2013 11 commits
-
-
Sumit.Saxena@lsi.com authored
Signed-off-by:
Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by:
Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by:
-
Sumit.Saxena@lsi.com authored
Add support to differentiate between iMR(no external memory) and MR(with external memory) controllers. Signed-off-by:
-
Sumit.Saxena@lsi.com authored
MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by:
-
Sumit.Saxena@lsi.com authored
This Driver will use more than 8 MSI-x support provided by Invader/Fury max upto 128 MSI-x. [jejb: fix checkpatch warning] Signed-off-by:
-
Sumit.Saxena@lsi.com authored
Signed-off-by:
-
Sumit.Saxena@lsi.com authored
Signed-off-by:
-
Sumit.Saxena@lsi.com authored
Signed-off-by:
-
Sumit.Saxena@lsi.com authored
Signed-off-by:
-
Sumit.Saxena@lsi.com authored
Free event detail memory from more common place, instead of doing it for limited device types. Signed-off-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
Sumit.Saxena@lsi.com authored
Signed-off-by:
-
Sumit.Saxena@lsi.com authored
Signed-off-by:
-
- 24 Jun, 2013 5 commits
-
-
Sumit.Saxena@lsi.com authored
Do not return SCSI_MLQUEUE_HOST_BUSY, but send DID_ERROR to SCSI mid-layer, if adapter is in critical error state. "SCSI_MLQUEUE_HOST_BUSY" will keep same SCSI command in loop and it is not a right return value, if controller is hardware critical error. Signed-off-by:
-
Martin K. Petersen authored
Make the driver return appropriate sense data when an unsupported operation is queued. This will cause the SCSI layer to stop issuing the offending command. Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
-
Martin K. Petersen authored
Not all disks fill out the VPD pages correctly. Add a blacklist flag that allows us ignore the SBC-3 VPD pages for a given device. The BLIST_SKIP_VPD_PAGES flag triggers our existing skip_vpd_pages scsi_device parameter to bypass VPD scanning. Also blacklist the offending Seagate drive model. Reported-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Reddy, Sreekanth authored
If CONFIG_SCSI_MPT2SAS_LOGGING is undefined, then these warnings are emitted drivers/scsi/mpt2sas/mpt2sas_scsih.c: In function '_scsih_sas_broadcast_primitive_event' drivers/scsi/mpt2sas/mpt2sas_scsih.c:5810:40: warning: unused variable 'event_data' Use pr_info() function instead of dewtprintk(). Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by:
-
Sreekanth Reddy authored
Signed-off-by:
-
