- 04 Jan, 2020 1 commit
-
-
Abdiel Janulgue authored
Local memory objects are similar to our usual scatterlist, but instead of using the struct page stored therein, we need to use the sg->dma_address. Signed-off-by:
Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 03 Jan, 2020 13 commits
-
-
Chris Wilson authored
Include the types used by the headers to they can be compiled standalone. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200103104516.1757103-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Move the definition of the igt_atomic_section[] into a C file, leaving the declaration in the header so as not to upset headertest! Signed-off-by:
-
Chris Wilson authored
Create a vmap for discontinguous lmem objects to support i915_gem_object_pin_map(). v2: Offset io address by region.start for fake-lmem Signed-off-by:
-
Chris Wilson authored
Keep scrubbing the kernel_context image with poison before we reset it in order to demonstrate that we will be resilient in the case where it is accidentally overwritten on idle. Suggested-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200102131707.1463945-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
Before we idle, on parking, we switch to the kernel context such that we have a scratch context loaded while the GPU idle, protecting any precious user state. Be paranoid and assume that the idle state may have been trashed, and reset the kernel_context image after idling. Signed-off-by:
-
Chris Wilson authored
We leave the kernel_context on the HW as we suspend (and while idle). There is no guarantee that is complete in memory, so we try to inhibit restoration from the kernel_context. Reinforce the inhibition by scrubbing the context. Signed-off-by:
-
Chris Wilson authored
When creating the initial LRC image, we also want to clear the MI_NOOPs and register values. Rather than use a blanket memset beforehand, apply the clears inline, close the context image and force inhibition of the uninitialised reminder. Signed-off-by:
-
Chris Wilson authored
Empirically the minimal context image we use for rcs is insufficient to state the engine. This is demonstrated if we poison the context image such that any uninitialised state is invalid, and so if the engine samples beyond our defined region, will fail to start. Signed-off-by:
-
Hans de Goede authored
On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
-
Hans de Goede authored
Move the Crystal Cove PMIC panel GPIO lookup-table from drivers/mfd/intel_soc_pmic_core.c to the i915 driver. The moved looked-up table is adding a GPIO lookup to the i915 PCI device and the GPIO subsys allows only one lookup table per device, The intel_soc_pmic_core.c code only adds lookup-table entries for the PMIC panel GPIO (as it deals only with the PMIC), but we also need to be able to access some GPIOs on the SoC itself, which requires entries for these GPIOs in the lookup-table. Since the lookup-table is attached to the i915 PCI device it really should be part of the i915 driver, this will also allow us to extend it with GPIOs from other sources when necessary. Acked-by:
Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by:
Lee Jones <lee.jones@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-5-hdegoede@redhat.com
-
Hans de Goede authored
When the LCD has not been turned on by the firmware/GOP, because e.g. the device was booted with an external monitor connected over HDMI, we should not turn on the panel-enable GPIO when we request it. Turning on the panel-enable GPIO when we request it, means we turn it on too early in the init-sequence, which causes some panels to not correctly light up. This commits adds a panel_is_on parameter to intel_dsi_vbt_gpio_init() and makes intel_dsi_vbt_gpio_init() set the initial GPIO value accordingly. This fixes the panel not lighting up on a Thundersoft TST168 tablet when booted with an external monitor connected over HDMI. Changes in v2: - Call intel_dsi_get_hw_state() to check if the panel is on instead of relying on the current_mode pointer Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-4-hdegoede@redhat.com
-
Hans de Goede authored
On some older devices (BYT, CHT) which may use v2 VBT MIPI-sequences, we need to manually control the panel enable GPIO as v2 sequences do not do this. So far we have been carrying the code to do this on BYT/CHT devices with a Crystal Cove PMIC in vlv_dsi.c, but as this really is a shortcoming of the VBT MIPI-sequences, intel_dsi_vbt.c is a better place for this, so move it there. This is a preparation patch for adding panel-enable and backlight-enable GPIO support for BYT devices where instead of the PMIC the SoC is used for backlight control. Reviewed-by:
-
Chris Wilson authored
Synchronise with any background retires and parking we may have spawned, so that all requests are accounted for. Closes: https://gitlab.freedesktop.org/drm/intel/issues/878Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200102231604.1669010-1-chris@chris-wilson.co.uk
-
- 02 Jan, 2020 3 commits
-
-
Chris Wilson authored
Small objects that only occupy a single page are naturally contiguous, so mark them as such and allow them the special abilities that come with it. A more thorough treatment would extend i915_gem_object_pin_map() to support discontiguous lmem objects, following the example of ioremap_prot() and use get_vm_area() + remap_io_sg(). Signed-off-by:
-
Masahiro Yamada authored
I implemented a small build rule in drivers/gpu/drm/i915/Makefile without relying on the special header-test-y syntax that was removed in commit fcbb8461 ("kbuild: remove header compile test"). I excluded some headers from the test coverage. I hope somebody intrested can take a closer look at them. Dummy subdir Makefiles can be removed altogether as single target build use case is now covered by commit 394053f4 ("kbuild: make single targets work more correctly"). v2 by Jani: - add selftests/i915_perf_selftests.h to no-header-test - add .gitignore for *.hdrtest Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
-
Jani Nikula authored
Merge branch 'ib-pinctrl-unreg-mappings' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into drm-intel-next-queued Merge pincntrl to unblock further i915 changes on top by Hans. Signed-off-by:
-
- 01 Jan, 2020 3 commits
-
-
Chris Wilson authored
We use the global device inode, shared amongst all files, and not the user's device filp to provide the backing storage for the mmap. The vma->vm_file provides a redundant reference that breaks existing expected behaviour that closing the user's device fd will release the resources bound to it, if a mmap persists. (Even without the vma->vm_file, the mmap will persist past the user's fd as the storage is bound to the device, i.e. our reference is on the object not file.) Fixes: cc662126 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET") Closes: https://gitlab.freedesktop.org/drm/intel/issues/919Signed-off-by:
-
Matt Roper authored
The workaround database now indicates we need to disable psdunit clock gating as well. v3: - Rebase on top of other workarounds that have landed. - Restrict cc:stable tag to 5.2+ since that's when ICL was first officially supported. Bspec: 32354 Bspec: 33450 Bspec: 33451 Suggested-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: stable@vger.kernel.org # v5.2+ Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Acked-by:
-
Chris Wilson authored
The coarse power gating was disabled as part of commit 2248a283 ("drm/i915/gen8+: Add RC6 CTX corruption WA") as a prelude to recover from the context corruption; the power gating itself has no direct impact on the RC6 context corruption. However, that recovery scheme was never implemented due to difficult corner cases, and so we no longer need to keep the power gating disabled. Fixes: 2248a283 ("drm/i915/gen8+: Add RC6 CTX corruption WA") Closes: https://gitlab.freedesktop.org/drm/intel/issues/846Signed-off-by:
-
- 31 Dec, 2019 3 commits
-
-
Abdiel Janulgue authored
Provide a way to set the PTE within apply_page_range for discontiguous objects in addition to the existing method of just incrementing the pfn for a page range. Fixes: cc662126 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET") Signed-off-by:
-
Matt Roper authored
Our usual i915 convention is to assume that future platforms will follow the same behavior as the latest platform of today. The VDBOX/SFC capabilities described here don't seem like something that should be specific to TGL, so let's future-proof by making the test apply to all gen12+ platforms. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com>
-
Chris Wilson authored
A small tweak to flush then invalidate appears to improve the reliability of ppGTT switches on Ivybridge -- but does not improve hsw/vlv bcs reliability. Signed-off-by:
-
- 30 Dec, 2019 13 commits
-
-
Chris Wilson authored
Do not reset RING_BB_STATE, leaving it to the default state value. This prevents bdw/bsw from getting confused when executing batches from the GGTT. Signed-off-by:
-
Chris Wilson authored
When cleaning up the mock device, remember to flush the context worker to free the residual GEM contexts before shutting down the device. Closes: https://gitlab.freedesktop.org/drm/intel/issues/802Signed-off-by:
-
Chris Wilson authored
Only restore valid resource streamer state from the context image, i.e. avoid restoring if we know the image is invalid. Closes: https://gitlab.freedesktop.org/drm/intel/issues/446Signed-off-by:
-
Chris Wilson authored
Mark the GT as wedged so that we are not tempted to use it prior to initialisation. Signed-off-by:
-
Chris Wilson authored
Assume that the HW starts off with tag 0 "active" and so avoid using tag 0 for our own first ELSP submission. Signed-off-by:
-
Chris Wilson authored
Set up the RING_MI_MODE in new contexts to clear the STOP_RING bit, just in case they find it still set after a reset (as they are the first contexts to be run). Signed-off-by:
-
Hans de Goede authored
Currently only the drivers/pinctrl/devicetree.c code allows registering pinctrl-mappings which may later be unregistered, all other mappings are assumed to be permanent. Non-dt platforms may also want to register pinctrl mappings from code which is build as a module, which requires being able to unregister the mapping when the module is unloaded to avoid dangling pointers. To allow unregistering the mappings the devicetree code uses 2 internal functions: pinctrl_register_map and pinctrl_unregister_map. pinctrl_register_map allows the devicetree code to tell the core to not memdup the mappings as it retains ownership of them and pinctrl_unregister_map does the unregistering, note this only works when the mappings where not memdupped. The only code relying on the memdup/shallow-copy done by pinctrl_register_mappings is arch/arm/mach-u300/core.c this commit replaces the __initdata with const, so that the shallow-copy is no longer necessary. After that we can get rid of the internal pinctrl_unregister_map function and just use pinctrl_register_mappings directly everywhere. This commit also renames pinctrl_unregister_map to pinctrl_unregister_mappings so that its naming matches its pinctrl_register_mappings counter-part and exports it. Together these 2 changes will allow non-dt platform code to register pinctrl-mappings from modules without breaking things on module unload (as they can now unregister the mapping on unload). Signed-off-by:
-
Chris Wilson authored
In the selftests, we may feed very long lists of blocks to be freed on culmination of the tests. This coupled with kasan and other malloc-tracing can make the kmem_cache_free() operation time consuming, and doing many of those trigger soft lockup warnings. Break the list up with a cond_resched(). Signed-off-by:
-
Manasi Navare authored
While clearing the Ports ync mode enable and master select bits we need to clear the register completely instead of using disable masks v3: * Remove reg variable (Matt) v2: * Just write 0 to the reg (Ville) * Rebase Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Fixes: 51528afe ("drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence") Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
Manasi Navare authored
Add an extra check before making master slave assignments for tiled displays to make sure we make these assignments only if all tiled connectors are present. If not then initialize the state to defaults so it does a normal non tiled modeset without transcoder port sync. v4: deafulat port sync values in prepare_cleared_state (Ville) v3: * Default master trans to INVALID to avoid pipe mismatch v2: * Rename icl_add_sync_mode_crtcs * Move this function just before .compute_config hook * Check if DP before master slave assignments (Ville) Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Manasi Navare authored
In case of tiled displays, all the tiles are linke dto each other for transcoder port sync. So in intel_atomic_check() we need to make sure that we add all the tiles to the modeset and if one of the tiles needs a full modeset then mark all other tiles for a full modeset. We also need to force modeset for all synced crtcs after fastset check. v6: * Add comments about why we do not call drm_atomic_helper_check_modeset (Matt) * Add FIXME for a corner case where tile info might vanish (Matt) v5: * Rebase v4: * Fix logic for modeset_synced_crtcs (Ville) v3: * Add tile checks only for Gen >11 v2: * Change crtc_state scope, remove tile_grp_id (Ville) * Use intel_connector_needs_modeset() (Ville) * Add modeset_synced_crtcs (Ville) * Make sure synced crtcs are forced full modeset after fastset check (Ville) Suggested-by:
-
Manasi Navare authored
In case of tiled displays, if we hotplug just one connector, fbcon currently just selects the preferred mode and if it is tiled mode then that becomes a problem if rest of the tiles are not present. So in the fbdev driver on hotplug when we probe the client modeset, if we dont find all the connectors for all tiles, then on a connector with one tile, just fallback to the first available non tiled mode to display over a single connector. On the hotplug of the consecutive tiled connectors, if the tiled mode no longer exists because of fbcon size limitation, then return no modes for consecutive tiles but retain the non tiled mode on the 0th tile. Use the same logic in case of connected boot case as well. This has been tested with Dell UP328K tiled monitor. v3: * Check Num tiled conns that are connected (Manasi) v2: * Set the modes on consecutive hotplugged tiles to no mode if tiled mode is pruned (Dave) v1: * Just handle the 1st connector hotplug case * v1 Reviewed-by: Dave Airlie <airlied@redhat.com> Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5Suggested-by:
Dave Airlie <airlied@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Manasi Navare authored
DRM Fb driver expects multiple CRTCs if it sees connector->has_tile is set, but we need to handle tile support and look for multiple CRTCs only for the modes that match the tile size. The other modes should be able to be displayed without tile support or uisng single CRTC. This patch adds the check to match the tile size with requested mode to handle the tile support. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
- 28 Dec, 2019 4 commits
-
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts tigerlake to tgl where appropriate. Signed-off-by:
Jani Nikula <jani.nikula@linux.intel.com> Acked-by:
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts ivybridge to ivb where appropriate. Signed-off-by:
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts broadwell to bdw where appropriate. Signed-off-by:
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts ironlake to ilk where appropriate. Signed-off-by:
-
