- 01 Feb, 2008 40 commits
-
-
Tom Tucker authored
Move the svc transport list logic into common transport creation code. Refactor this code path to make the flow of control easier to read. Move the setting and clearing of the BUSY_BIT during transport creation to common code. Signed-off-by:
Tom Tucker <tom@opengridcomputing.com> Acked-by:
Neil Brown <neilb@suse.de> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
Greg Banks <gnb@sgi.com> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu>
-
Tom Tucker authored
This function is transport independent. Change it to use svc_xprt directly and change it's name to reflect this. Signed-off-by:
-
Tom Tucker authored
All of the transport field and functions used by svc_recv are now transport independent. Change the svc_recv function to use the svc_xprt structure directly instead of the transport specific svc_sock structure. Signed-off-by:
-
Tom Tucker authored
The svc_sock_release function only touches transport independent fields. Change the function to manipulate svc_xprt directly instead of the transport dependent svc_sock structure. Signed-off-by:
-
Tom Tucker authored
This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by:
-
Tom Tucker authored
This patch moves the transport independent sk_deferred list to the svc_xprt structure and updates the svc_deferred_req structure to keep pointers to svc_xprt's directly. The deferral processing code is also moved out of the transport dependent recvfrom functions and into the generic svc_recv path. Signed-off-by:
-
Tom Tucker authored
Move the authinfo cache to svc_xprt. This allows both the TCP and RDMA transports to share this logic. A flag bit is used to determine if auth information is to be cached or not. Previously, this code looked at the transport protocol. I've also changed the spin_lock/unlock logic so that a lock is not taken for transports that are not caching auth info. Signed-off-by:
-
Tom Tucker authored
With the implementation of the new mark and sweep algorithm for shutting down old connections, the sk_lastrecv field is no longer needed. Signed-off-by:
-
Tom Tucker authored
Now that the svc_xprt_received function handles transports, the call to svc_xprt_received in the xpo_tcp_accept function can be moved to common code. Signed-off-by:
-
Tom Tucker authored
All fields touched by svc_sock_received are now transport independent. Change it to use svc_xprt directly. This function is called from transport dependent code, so export it. Update the comment to clearly state the rules for calling this function. Signed-off-by:
-
Tom Tucker authored
Move the sk_mutex field to the transport independent svc_xprt structure. Now all the fields that svc_send touches are transport neutral. Change the svc_send function to use the transport independent svc_xprt directly instead of the transport dependent svc_sock structure. Signed-off-by:
-
Tom Tucker authored
The svc_sock_enqueue function is now transport independent since all of the fields it touches have been moved to the transport independent svc_xprt structure. Change the function to use the svc_xprt structure directly instead of the transport specific svc_sock structure. Transport specific data-ready handlers need to call this function, so export it. Signed-off-by:
-
Tom Tucker authored
This functionally trivial patch moves the sk_reserved field to the transport independent svc_xprt structure. Signed-off-by:
-
Tom Tucker authored
Move sk_list and sk_ready to svc_xprt. This involves close because these lists are walked by svcs when closing all their transports. So I combined the moving of these lists to svc_xprt with making close transport independent. The svc_force_sock_close has been changed to svc_close_all and takes a list as an argument. This removes some svc internals knowledge from the svcs. This code races with module removal and transport addition. Thanks to Simon Holm Thøgersen for a compile fix. Signed-off-by:
-
Tom Tucker authored
This is another incremental change that moves transport independent fields from svc_sock to the svc_xprt structure. The changes should be functionally null. Signed-off-by:
-
Tom Tucker authored
This functionally trivial change moves the transport independent sk_flags field to the transport independent svc_xprt structure. Signed-off-by:
-
Tom Tucker authored
Change the atomic_t reference count to a kref and move it to the transport indepenent svc_xprt structure. Change the reference count wrapper names to be generic. Signed-off-by:
-
Tom Tucker authored
Modify the various kernel RPC svcs to use the svc_create_xprt service. Signed-off-by:
-
Tom Tucker authored
The svc_create_xprt function is a transport independent version of the svc_makesock function. Since transport instance creation contains transport dependent and independent components, add an xpo_create transport function. The transport implementation of this function allocates the memory for the endpoint, implements the transport dependent initialization logic, and calls svc_xprt_init to initialize the transport independent field (svc_xprt) in it's data structure. Signed-off-by:
-
Tom Tucker authored
Move the code that poaches connections when the connection limit is hit to a subroutine to make the accept logic path easier to follow. Since this is in the new connection path, it should not be a performance issue. Signed-off-by:
-
Tom Tucker authored
The svc_tcp_accept function calls svc_sock_enqueue after setting the SK_CONN bit. This doesn't actually do anything because the SK_BUSY bit is still set. The call is unnecessary anyway because the generic code in svc_recv calls svc_sock_received after calling the accept function. Signed-off-by:
-
Tom Tucker authored
Previously, the accept logic looked into the socket state to determine whether to call accept or recv when data-ready was indicated on an endpoint. Since some transports don't use sockets, this logic now uses a flag bit (SK_LISTENER) to identify listening endpoints. A transport function (xpo_accept) allows each transport to define its own accept processing. A transport's initialization logic is reponsible for setting the SK_LISTENER bit. I didn't see any way to do this in transport independent logic since the passive side of a UDP connection doesn't listen and always recv's. In the svc_recv function, if the SK_LISTENER bit is set, the transport xpo_accept function is called to handle accept processing. Note that all functions are defined even if they don't make sense for a given transport. For example, accept doesn't mean anything for UDP. The function is defined anyway and bug checks if called. The UDP transport should never set the SK_LISTENER bit. Signed-off-by:
-
Tom Tucker authored
Close handling was duplicated in the UDP and TCP recvfrom methods. This code has been moved to the transport independent svc_recv function. Signed-off-by:
-
Tom Tucker authored
In order to avoid blocking a service thread, the receive side checks to see if there is sufficient write space to reply to the request. Each transport has a different mechanism for determining if there is enough write space to reply. The code that checked for write space was coupled with code that checked for CLOSE and CONN. These checks have been broken out into separate statements to make the code easier to read. Signed-off-by:
-
Tom Tucker authored
Some transports add fields to the RPC header for replies, e.g. the TCP record length. This function is called when preparing the reply header to allow each transport to add whatever fields it requires. Signed-off-by:
-
Tom Tucker authored
Add transport specific xpo_detach and xpo_free functions. The xpo_detach function causes the transport to stop delivering data-ready events and enqueing the transport for I/O. The xpo_free function frees all resources associated with the particular transport instance. Signed-off-by:
-
Tom Tucker authored
The svc_sock_release function releases pages allocated to a thread. For UDP this frees the receive skb. For RDMA it will post a receive WR and bump the client credit count. Signed-off-by:
-
Tom Tucker authored
The sk_sendto and sk_recvfrom are function pointers that allow svc_sock to be used for both UDP and TCP. Move these function pointers to the svc_xprt_ops structure. Signed-off-by:
-
Tom Tucker authored
The svc_max_payload function currently looks at the socket type to determine the max payload. Add a max payload value to svc_xprt_class so it can be returned directly. Signed-off-by:
-
Tom Tucker authored
The rqstp structure contains a pointer to the transport for the RPC request. This functionaly trivial patch adds an unamed union with pointers to both svc_sock and svc_xprt. Ultimately the union will be removed and only the rq_xprt field will remain. This allows incrementally extracting transport independent interfaces without one gigundo patch. Signed-off-by:
-
Tom Tucker authored
Make TCP and UDP svc_sock transports, and register them with the svc transport core. A transport type (svc_sock) has an svc_xprt as its first member, and calls svc_xprt_init to initialize this field. Signed-off-by:
-
Tom Tucker authored
The transport class (svc_xprt_class) represents a type of transport, e.g. udp, tcp, rdma. A transport class has a unique name and a set of transport operations kept in the svc_xprt_ops structure. A transport class can be dynamically registered and unregisterd. The svc_xprt_class represents the module that implements the transport type and keeps reference counts on the module to avoid unloading while there are active users. The endpoint (svc_xprt) is a generic, transport independent endpoint that can be used to send and receive data for an RPC service. It inherits it's operations from the transport class. A transport driver module registers and unregisters itself with svc sunrpc by calling svc_reg_xprt_class, and svc_unreg_xprt_class respectively. Signed-off-by:
-
J. Bruce Fields authored
If we don't do this then we'll end up with a pointless unusable context sitting in the cache until the time the original context would have expired. Signed-off-by: -
Oleg Drokin authored
Fix nlm_block leak for the case of supplied blocking lock info. Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
-
J. Bruce Fields authored
Document these checks a little better and inline, as suggested by Neil Brown (note both functions have two callers). Remove an obviously bogus check while we're there (checking whether unsigned value is negative). Signed-off-by: -
J. Bruce Fields authored
Make an obvious simplification that removes a few lines and some unnecessary indentation; no change in behavior. Signed-off-by: -
Neil Brown authored
nfs@lists.sourceforge.net is being decommissioned. Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
J. Bruce Fields authored
For some reason we haven't been put()'ing the reference count here. Signed-off-by: -
J. Bruce Fields authored
The server silently ignores attempts to set the uid and gid on create. Based on the comment, this appears to have been done to prevent some overly-clever IRIX client from causing itself problems. Perhaps we should remove that hack completely. For now, at least, it makes sense to allow root (when no_root_squash is set) to set uid and gid. While we're there, since nfsd_create and nfsd_create_v3 share the same logic, pull that out into a separate function. And spell out the individual modifications of ia_valid instead of doing them both at once inside a conditional. Thanks to Roger Willcocks <roger@filmlight.ltd.uk> for the bug report and original patch on which this is based. Signed-off-by: -
Oleg Drokin authored
Without the patch, there is a leakage of nlmblock structure refcount that holds a reference nlmfile structure, that holds a reference to struct file, when async GETFL is used (-EINPROGRESS return from file_ops->lock()), and also in some error cases. Fix up a style nit while we're here. Signed-off-by:
-
