Skip to content

L
linux
Switch branch/tag
  1. 28 Mar, 2019 8 commits
    • Jiri Olsa's avatar
      perf evsel: Fix max perf_event_attr.precise_ip detection · 4e8a5c15
      Jiri Olsa authored 
      After a discussion with Andi, move the perf_event_attr.precise_ip
detection for maximum precise config (via :P modifier or for default
cycles event) to perf_evsel__open().

The current detection in perf_event_attr__set_max_precise_ip() is
tricky, because precise_ip config is specific for given event and it
currently checks only hw cycles.

We now check for valid precise_ip value right after failing
sys_perf_event_open() for specific event, before any of the
perf_event_attr fallback code gets executed.

This way we get the proper config in perf_event_attr together with
allowed precise_ip settings.

We can see that code activity with -vv, like:

  $ perf record -vv ls
  ...
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    { sample_period, sample_freq }   4000
    ...
    precise_ip                       3
    sample_id_all                    1
    exclude_guest                    1
    mmap2                            1
    comm_exec                        1
    ksymbol                          1
  ------------------------------------------------------------
  sys_perf_event_open: pid 9926  cpu 0  group_fd -1  flags 0x8
  sys_perf_event_open failed, error -95
  decreasing precise_ip by one (2)
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    { sample_period, sample_freq }   4000
    ...
    precise_ip                       2
    sample_id_all                    1
    exclude_guest                    1
    mmap2                            1
    comm_exec                        1
    ksymbol                          1
  ------------------------------------------------------------
  sys_perf_event_open: pid 9926  cpu 0  group_fd -1  flags 0x8 = 4
  ...
Suggested-by: default avatarAndi Kleen <ak@linux.intel.com>
Signed-off-by: default avatarJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-dkvxxbeg7lu74155d4jhlmc9@git.kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      4e8a5c15
    • Adrian Hunter's avatar
      perf intel-pt: Fix TSC slip · f3b4e06b
      Adrian Hunter authored 
      A TSC packet can slip past MTC packets so that the timestamp appears to
go backwards. One estimate is that can be up to about 40 CPU cycles,
which is certainly less than 0x1000 TSC ticks, but accept slippage an
order of magnitude more to be on the safe side.
Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 79b58424 ("perf tools: Add Intel PT support for decoding MTC packets")
Link: http://lkml.kernel.org/r/20190325135135.18348-1-adrian.hunter@intel.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      f3b4e06b
    • Solomon Tan's avatar
      perf cs-etm: Add missing case value · c8fa7a80
      Solomon Tan authored 
      The following error was thrown when compiling `tools/perf` using OpenCSD
v0.11.1. This patch fixes said error.

    CC       util/intel-pt-decoder/intel-pt-log.o
    CC       util/cs-etm-decoder/cs-etm-decoder.o
  util/cs-etm-decoder/cs-etm-decoder.c: In function
  ‘cs_etm_decoder__buffer_range’:
  util/cs-etm-decoder/cs-etm-decoder.c:370:2: error: enumeration value
  ‘OCSD_INSTR_WFI_WFE’ not handled in switch [-Werror=switch-enum]
    switch (elem->last_i_type) {
    ^~~~~~
    CC       util/intel-pt-decoder/intel-pt-decoder.o
  cc1: all warnings being treated as errors

Because `OCSD_INSTR_WFI_WFE` case was added only in v0.11.0, the minimum
required OpenCSD library version for this patch is no longer v0.10.0.
Signed-off-by: default avatarSolomon Tan <solomonbobstoner@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190322052255.GA4809@w-OptiPlex-7050Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      c8fa7a80
    • David Howells's avatar
      afs: Fix StoreData op marshalling · 8c7ae38d
      David Howells authored 
      The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls
generated by ->setattr() ops for the purpose of expanding a file is
incorrect due to older documentation incorrectly describing the way the RPC
'FileLength' parameter is meant to work.

The older documentation says that this is the length the file is meant to
end up at the end of the operation; however, it was never implemented this
way in any of the servers, but rather the file is truncated down to this
before the write operation is effected, and never expanded to it (and,
indeed, it was renamed to 'TruncPos' in 2014).

Fix this by setting the position parameter to the new file length and doing
a zero-lengh write there.

The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file
it then mmaps.  This can be tested by giving the following test program a
filename in an AFS directory:

	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <fcntl.h>
	#include <sys/mman.h>
	int main(int argc, char *argv[])
	{
		char *p;
		int fd;
		if (argc != 2) {
			fprintf(stderr,
				"Format: test-trunc-mmap <file>\n");
			exit(2);
		}
		fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC);
		if (fd < 0) {
			perror(argv[1]);
			exit(1);
		}
		if (ftruncate(fd, 0x140008) == -1) {
			perror("ftruncate");
			exit(1);
		}
		p = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
			 MAP_SHARED, fd, 0);
		if (p == MAP_FAILED) {
			perror("mmap");
			exit(1);
		}
		p[0] = 'a';
		if (munmap(p, 4096) < 0) {
			perror("munmap");
			exit(1);
		}
		if (close(fd) < 0) {
			perror("close");
			exit(1);
		}
		exit(0);
	}

Fixes: 31143d5d ("AFS: implement basic file write support")
Reported-by: default avatarJonathan Billings <jsbillin@umich.edu>
Tested-by: default avatarJonathan Billings <jsbillin@umich.edu>
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8c7ae38d
    • David Howells's avatar
      vfs: Update mount API docs · 7d6ab823
      David Howells authored 
      Update the mount API docs to reflect recent changes to the code.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7d6ab823
    • Linus Torvalds's avatar
      Merge tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux · bfed6d0f
      Linus Torvalds authored 
      Pull s390 fixes from Martin Schwidefsky:
 "Improvements and bug fixes for 5.1-rc2:

   - Fix early free of the channel program in vfio

   - On AP device removal make sure that all messages are flushed with
     the driver still attached that queued the message

   - Limit brk randomization to 32MB to reduce the chance that the heap
     of ld.so is placed after the main stack

   - Add a rolling average for the steal time of a CPU, this will be
     needed for KVM to decide when to do busy waiting

   - Fix a warning in the CPU-MF code

   - Add a notification handler for AP configuration change to react
     faster to new AP devices"

* tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cpumf: Fix warning from check_processor_id
  zcrypt: handle AP Info notification from CHSC SEI command
  vfio: ccw: only free cp on final interrupt
  s390/vtime: steal time exponential moving average
  s390/zcrypt: revisit ap device remove procedure
  s390: limit brk randomization to 32MB
      bfed6d0f
    • Linus Torvalds's avatar
      Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc · 97c41a6b
      Linus Torvalds authored 
      Pull ARM SoC fixes from Arnd Bergmann:
 "A couple of minor fixes only for now

   - fix for incorrect DMA channels on Renesas R-Car

   - Broadcom bcm2835 error handling fixes

   - Kconfig dependency fixes for bcm2835 and davinci

   - CPU idle wakeup fix for i.MX6

   - MMC regression on Tegra186

   - fix incorrect phy settings on one imx board"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186
  ARM: dts: nomadik: Fix polarity of SPI CS
  ARM: davinci: fix build failure with allnoconfig
  ARM: imx_v4_v5_defconfig: enable PWM driver
  ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
  ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
  ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
  ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
  ARM: dts: pfla02: increase phy reset duration
  ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
  ARM: imx51: fix a leaked reference by adding missing of_node_put
  ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
  arm64: bcm2835: Add missing dependency on MFD_CORE.
  ARM: dts: bcm283x: Fix hdmi hpd gpio pull
  soc: bcm: bcm2835-pm: Fix error paths of initialization.
  soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
  arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
  arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
      97c41a6b
    • Thomas Richter's avatar
      s390/cpumf: Fix warning from check_processor_id · b6ffdf27
      Thomas Richter authored 
      Function __hw_perf_event_init() used a CPU variable without
ensuring CPU preemption has been disabled. This caused the
following warning in the kernel log:

  [ 7.277085] BUG: using smp_processor_id() in preemptible
                 [00000000] code: cf-csdiag/1892
  [ 7.277111] caller is cf_diag_event_init+0x13a/0x338
  [ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted
                 5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1
  [ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR)
  [ 7.277139] Call Trace:
  [ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0)
  [ 7.277161]  [<0000000000b7a71a>] dump_stack+0x92/0xd0
  [ 7.277174]  [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100
  [ 7.277183]  [<00000000001228aa>] cf_diag_event_init+0x13a/0x338
  [ 7.277195]  [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0
  [ 7.277204]  [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0
  [ 7.277214]  [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50
  [ 7.277224]  [<0000000000b9e8f0>] system_call+0xdc/0x2d8
  [ 7.277233] 2 locks held by cf-csdiag/1892:
  [ 7.277241]  #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.},
                  at: __s390x_sys_perf_event_open+0xd2e/0xd50
  [ 7.277257]  #1: 00000000363b11bd (&pmus_srcu){....},
                  at: perf_event_alloc+0x52e/0xce0

The variable is now accessed in proper context. Use
get_cpu_var()/put_cpu_var() pair to disable
preemption during access.
As the hardware authorization settings apply to all CPUs, it
does not matter which CPU is used to check the authorization setting.

Remove the event->count assignment. It is not needed as function
perf_event_alloc() allocates memory for the event with kzalloc() and
thus count is already set to zero.

Fixes: fe5908bc ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace")
Signed-off-by: default avatarThomas Richter <tmricht@linux.ibm.com>
Reviewed-by: default avatarHendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
      b6ffdf27
  3. 27 Mar, 2019 1 commit
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 1a9df9e2
      Linus Torvalds authored 
      Pull networking fixes from David Miller:
 "Fixes here and there, a couple new device IDs, as usual:

   1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.

   2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.

   3) Fix documentation for some eBPF helpers, from Quentin Monnet.

   4) Some UAPI bpf header sync with tools, also from Quentin Monnet.

   5) Set descriptor ownership bit at the right time for jumbo frames in
      stmmac driver, from Aaro Koskinen.

   6) Set IFF_UP properly in tun driver, from Eric Dumazet.

   7) Fix load/store doubleword instruction generation in powerpc eBPF
      JIT, from Naveen N. Rao.

   8) nla_nest_start() return value checks all over, from Kangjie Lu.

   9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
      merge window. From Marcelo Ricardo Leitner and Xin Long.

  10) Fix memory corruption with large MTUs in stmmac, from Aaro
      Koskinen.

  11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
      Dumazet.

  12) Fix topology subscription cancellation in tipc, from Erik Hugne.

  13) Memory leak in genetlink error path, from Yue Haibing.

  14) Valid control actions properly in packet scheduler, from Davide
      Caratti.

  15) Even if we get EEXIST, we still need to rehash if a shrink was
      delayed. From Herbert Xu.

  16) Fix interrupt mask handling in interrupt handler of r8169, from
      Heiner Kallweit.

  17) Fix leak in ehea driver, from Wen Yang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
  dpaa2-eth: fix race condition with bql frame accounting
  chelsio: use BUG() instead of BUG_ON(1)
  net: devlink: skip info_get op call if it is not defined in dumpit
  net: phy: bcm54xx: Encode link speed and activity into LEDs
  tipc: change to check tipc_own_id to return in tipc_net_stop
  net: usb: aqc111: Extend HWID table by QNAP device
  net: sched: Kconfig: update reference link for PIE
  net: dsa: qca8k: extend slave-bus implementations
  net: dsa: qca8k: remove leftover phy accessors
  dt-bindings: net: dsa: qca8k: support internal mdio-bus
  dt-bindings: net: dsa: qca8k: fix example
  net: phy: don't clear BMCR in genphy_soft_reset
  bpf, libbpf: clarify bump in libbpf version info
  bpf, libbpf: fix version info and add it to shared object
  rxrpc: avoid clang -Wuninitialized warning
  tipc: tipc clang warning
  net: sched: fix cleanup NULL pointer exception in act_mirr
  r8169: fix cable re-plugging issue
  net: ethernet: ti: fix possible object reference leak
  net: ibm: fix possible object reference leak
  ...
      1a9df9e2
  5. 26 Mar, 2019 20 commits
  7. 25 Mar, 2019 11 commits
    • Linus Torvalds's avatar
      Revert "parport: daisy: use new parport device model" · a3ac7917
      Linus Torvalds authored 
      This reverts commit 1aec4211.

Steven Rostedt reports that it causes a hang at bootup and bisected it
to this commit.

The troigger is apparently a module alias for "parport_lowlevel" that
points to "parport_pc", which causes a hang with

    modprobe -q -- parport_lowlevel

blocking forever with a backtrace like this:

    wait_for_completion_killable+0x1c/0x28
    call_usermodehelper_exec+0xa7/0x108
    __request_module+0x351/0x3d8
    get_lowlevel_driver+0x28/0x41 [parport]
    __parport_register_driver+0x39/0x1f4 [parport]
    daisy_drv_init+0x31/0x4f [parport]
    parport_bus_init+0x5d/0x7b [parport]
    parport_default_proc_register+0x26/0x1000 [parport]
    do_one_initcall+0xc2/0x1e0
    do_init_module+0x50/0x1d4
    load_module+0x1c2e/0x21b3
    sys_init_module+0xef/0x117

Supid says:
 "Due to the new device model daisy driver will now try to find the
  parallel ports while trying to register its driver so that it can bind
  with them. Now, since daisy driver is loaded while parport bus is
  initialising the list of parport is still empty and it tries to load
  the lowlevel driver, which has an alias set to parport_pc, now causes
  a deadlock"

But I don't think the daisy driver should be loaded by the parport
initialization in the first place, so let's revert the whole change.

If the daisy driver can just initialize separately on its own (like a
driver should), instead of hooking into the parport init sequence
directly, this issue probably would go away.
Reported-and-bisected-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
Reported-by: default avatarMichal Kubecek <mkubecek@suse.cz>
Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a3ac7917
    • Jonathan Hunter's avatar
      arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186 · 93958742
      Jonathan Hunter authored 
      Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression
that is causing accesses to the file-system on the eMMC to fail. Errors
such as the following have been observed ...

 mmc2: running CQE recovery
 mmc2: mmc_select_hs400 failed, error -110
 print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700
 mmc2: cqhci: CQE failed to exit halt state

For now disable CQE support for Tegra186 until this issue is resolved.

Fixes: dfd3cb6f arm64: tegra: Add CQE Support for SDMMC4
Signed-off-by: default avatarJonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      93958742
    • Arnd Bergmann's avatar
      Merge tag 'imx-fixes-5.1' of... · 2e8c54db
      Arnd Bergmann authored 
      Merge tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.1:
 - Correct phy mode setting of imx6dl-yapp4 board to fix a problem
   caused by commit 5ecdd77c ("net: dsa: qca8k: disable delay
   for RGMII mode").
 - Add a missing of_node_put call to fix leaked reference detected by
   coccinelle in imx51 machine code.
 - Fix imx6q cpuidle driver bug which causes that CPU might not wake up
   at expected time.
 - Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
   transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
 - Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
 - Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
 - Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
 - Update PWM driver options in imx defconfig files due to the change
   on driver part.

* tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v4_v5_defconfig: enable PWM driver
  ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
  ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
  ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
  ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
  ARM: dts: pfla02: increase phy reset duration
  ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
  ARM: imx51: fix a leaked reference by adding missing of_node_put
  ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
      2e8c54db
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes · 0cee41d4
      Arnd Bergmann authored 
      This pull request contains Broadcom ARM/ARM64-based SoCs fixes for 5.1,
please pull the following:

- Eric provides fixes for the bcm2835-pm driver: added missing depends
  on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error
  paths on initialization and fixing the PM_IMAGE_PERI power domain

* tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux:
  arm64: bcm2835: Add missing dependency on MFD_CORE.
  soc: bcm: bcm2835-pm: Fix error paths of initialization.
  soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
      0cee41d4
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes · 274a8ddc
      Arnd Bergmann authored 
      This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.1, please pull the following:

- Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi
  model B revision 2

* tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm283x: Fix hdmi hpd gpio pull
      274a8ddc
    • Linus Walleij's avatar
      ARM: dts: nomadik: Fix polarity of SPI CS · fa946356
      Linus Walleij authored 
      The SPI DT bindings are for historical reasons a pitfall,
the ability to flag a GPIO line as active high/low with
the second cell flags was introduced later so the SPI
subsystem will only accept the bool flag spi-cs-high
to indicate that the line is active high.

It worked by mistake, but the mistake was corrected
in another commit.

The comment in the DTS file was also misleading: this
CS is indeed active high.

Fixes: cffbb02d ("ARM: dts: nomadik: Augment NHK15 panel setting")
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      fa946356
    • Arnd Bergmann's avatar
      Merge tag 'renesas-fixes-for-v5.1' of... · 44cd9050
      Arnd Bergmann authored 
      Merge tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes

Renesas ARM Based SoC Fixes for v5.1

R-Car Gen3 E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs:
* Correct SCIF5 DMA channels

* tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
  arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
      44cd9050
    • Sekhar Nori's avatar
      ARM: davinci: fix build failure with allnoconfig · 2dbed152
      Sekhar Nori authored 
      allnoconfig build with just ARCH_DAVINCI enabled
fails because drivers/clk/davinci/* depends on
REGMAP being enabled.

Fix it by selecting REGMAP_MMIO when building in
DaVinci support.
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
Reviewed-by: default avatarDavid Lechner <david@lechnology.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      2dbed152
    • Jeff Layton's avatar
      locks: wake any locks blocked on request before deadlock check · 945ab8f6
      Jeff Layton authored 
      Andreas reported that he was seeing the tdbtorture test fail in some
cases with -EDEADLCK when it wasn't before. Some debugging showed that
deadlock detection was sometimes discovering the caller's lock request
itself in a dependency chain.

While we remove the request from the blocked_lock_hash prior to
reattempting to acquire it, any locks that are blocked on that request
will still be present in the hash and will still have their fl_blocker
pointer set to the current request.

This causes posix_locks_deadlock to find a deadlock dependency chain
when it shouldn't, as a lock request cannot block itself.

We are going to end up waking all of those blocked locks anyway when we
go to reinsert the request back into the blocked_lock_hash, so just do
it prior to checking for deadlocks. This ensures that any lock blocked
on the current request will no longer be part of any blocked request
chain.

URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975
Fixes: 5946c431 ("fs/locks: allow a lock request to block other requests.")
Cc: stable@vger.kernel.org
Reported-by: default avatarAndreas Schneider <asn@redhat.com>
Signed-off-by: default avatarNeil Brown <neilb@suse.com>
Signed-off-by: default avatarJeff Layton <jlayton@kernel.org>
      945ab8f6
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · 27602e2c
      David S. Miller authored 
      Alexei Starovoitov says:

====================
pull-request: bpf 2019-03-24

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) libbpf verision fix up from Daniel.

2) fix liveness propagation from Jakub.

3) fix verbose print of refcounted regs from Martin.

4) fix for large map allocations from Martynas.

5) fix use after free in sanitize_ptr_alu from Xu.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      27602e2c
    • Alexei Starovoitov's avatar
      Merge branch 'libbpf-fixup' · a7d6ac37
      Alexei Starovoitov authored 
      Daniel Borkmann says:

====================
First one is fixing version in Makefile and shared object and
second one clarifies bump in version. Thanks!

v1 -> v2:
  - Fix up soname, thanks Stanislav!
====================
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      a7d6ac37
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7