- 07 Mar, 2015 3 commits
-
-
Mathias Gottschlag authored
These PS/2 commands make some touchpads stop responding, so this commit adds some dummy functions to replace the generic implementation. Because scale changes were not encapsulated in a method of struct psmouse yet, this commit adds a method set_scale to psmouse. Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Mathias Gottschlag authored
We don't know whether x_max or y_max really hold the maximum possible coordinates, and we don't know for sure whether we correctly interpret the coordinates sent by the touchpad, so we clamp the reported values to prevent confusion in userspace code. Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Mathias Gottschlag authored
The size has in most cases already been fetched from the touchpad, the hardcoded values should have been removed. Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 04 Mar, 2015 2 commits
-
-
Valentin Rothberg authored
Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. Currently, plat->irqtype is only set to IRQF_TRIGGER_FALLING. This patch sets the ONESHOT flag directly in request_threaded_irq() to enforce the flag without being affected by future changes to plat->irqtype. Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
This fixes memory leak introduced by commit a09221e8Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 02 Mar, 2015 3 commits
-
-
Arnd Bergmann authored
The sun4i-ts driver has had a dependency on the thermal code with the addition of the thermal zone sensor support, but this is not currently enforced in Kconfig, so with TOUCHSCREEN_SUN4I=y, THERMAL=m and THERMAL_OF=y we get drivers/built-in.o: In function `sun4i_ts_remove': :(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister' drivers/built-in.o: In function `sun4i_ts_probe': :(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register' :(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister' We need the dependency on THERMAL in order to ensure that this driver becomes a loadable module if the thermal support itself is modular, while the dependency on THERMAL_OF is a runtime dependency and the driver will still build if it is missing. It is entirely possible to build sun4i-ts without THERMAL_OF just to use the hwmon sensors and/or touchscreen. Fixes: 22369710 ("Input: sun4i-ts - add thermal zone sensor support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [wens@csie.org: Fix description and Kconfig dependencies] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Geert Uytterhoeven authored
drivers/input/mouse/cyapa_gen5.c: In function ‘cyapa_gen5_read_idac_data’: drivers/input/mouse/cyapa_gen5.c:1876: warning: ‘max_element_cnt’ may be used uninitialized in this function drivers/input/mouse/cyapa_gen5.c:1873: warning: ‘offset’ may be used uninitialized in this function If *data_size is non-zero, and idac_data_type contains an unknown type, max_element_cnt and offset will be uninitialized, and the loop will process non-existing data. However, this cannot happen (for now), as there's a test for unknown types at the top of cyapa_gen5_read_idac_data(). As no "if ... else if ..." is used in other places, remove the superfluous "if" to silence the compiler warning. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dudley Du authored
Use asm/unaligned.h instead of linux/unaligned/access_ok.h header file to fix compiling issues such as following while doing cross platform compiling: "include/linux/unaligned/access_ok.h:7:19: error: redefinition of 'get_unaligned_le16' ... include/linux/unaligned/le_struct.h:6:19: note: previous definition of 'get_unaligned_le16' was here". Reported-by: kbuild test robot <kbuild-all@01.org> Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 26 Feb, 2015 1 commit
-
-
Stefan Sauer authored
Add the parent device so that udev can show the full hierarchy. This avoids the device showing up under /devices/virtual/input instead of the i2c bus it is actually attached to. Signed-off-by: Stefan Sauer <ensonic@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 20 Feb, 2015 1 commit
-
-
Dmitry Torokhov authored
Second round of updates for 3.20.
-
- 16 Feb, 2015 11 commits
-
-
Dmitry Torokhov authored
Instead of having various protocols provide <protocol>_supported() functions, let's use IS_ENABLED() macro that works well in "if" statements. Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Merge bfin_rotary driver changes from Sonic Zhang.
-
Dmitry Torokhov authored
Introduce open and close methods for the input device to postpone enabling the device until it is needed. Acked-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sonic Zhang authored
Use of managed resources simplifies error handling. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sonic Zhang authored
Instead of using arch-specific accessors remap rotary register physical address into kernel space in probe and use standard readw and writew to access rotary MMRs. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sonic Zhang authored
Newer Blackfin boards use pinctrl API to manage pins and the legacy peripherial lists are not useful on them. Let's move pin lists into platform data so older boards can still use them and newer boards can use the modern API. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sonic Zhang authored
The platform data definition of the rotary driver should be generic for all architectures. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Instead of using #ifdef to guard potentially unused suspend and resume code let's mark them as __maybe_unused so they still get discarded if they are not used but we do not get warning. This allows for better compile coverage. Acked-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
The interrupt handler in the driver tries to fetch driver data from platform device, unfortunately it is only set up after interrupt handler is registered. Since interrupt handler does not really need to access the platform device itself let's change it to get the driver data instance instead. Acked-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Pali Rohár authored
This patch move all packet info from driver source code to documentation and adds info about v6 packet format (from driver source code). Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
The comment about suspicions entry 0x20, 0x02, 0x0e has over time drifted away and it become hard to figure out what it meant. Let's move it back so it is clear. Reported-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 15 Feb, 2015 6 commits
-
-
Pali Rohár authored
Previously dev2 device was used for both external PS/2 mouse and internal trackstick device (if available). This change introduces dev3 device which is used for external PS/2 mouse data and dev2 is now used only for trackstick. In case that trackstick is not present dev2 is not created, so userspace does not see non existent device in system. Because laptops with ALPS devices often do not use i8042 active multiplexing all data (from touchpad, trackstick and external PS/2 mouse) come to one port. So it is not possible to know if external PS/2 mouse is connected or not. In most cases external PS/2 mouse is not connected so driver will create dev3 input device after first bare PS/2 packet will be received. So there will not be "ghost" input device. This change also helps in identifying possible problems in future if driver decides to report 6-bytes trackstick packets as 3-bytes bare PS/2 (data will be reported to dev3 instead dev2). Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
On some Dell Latitudes we fail to identify presence of trackstick unless we reset the device. The issue is quite benign as we do perform reset in alps_init(), so the trackstick ends up working, but mouse name reported to userspace is not accurate. In order to fix the issue while avoiding the additional lengthy reset we move the resrt to alps_detect() and keep the discovered state to be used later in alps_init(). Reported-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Move setting of all protocol properties into alps_set_protocol (former alps_set_defaults) instead of having it split between several functions. Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
In preparation of reworking the way we set protocol parameters let's split certain protocol items from alps_model_info into a separate structure. Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Even though Rushmore is very close to V3 protocol it is sufficiently different to warrant it's own protocol name. Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
In order to accommodate new protocol number for Rushmore touchpads let's shift protocol numbers by 8 bits (i.e. 1 -> 0x100) - this way we keep protocol version reported in input device id the same as it was, but add some holes in numbering. Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 12 Feb, 2015 2 commits
-
-
Markus Elfring authored
The input_free_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dan Carpenter authored
Static checkers complain about this NULL check because we dereference it without checking a couple lines later. This function is only called when "keypad->pdata" is non-NULL so we can just delete the NULL test. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [Dmitry: remove the variable altogether given that it is used just once and dereference directly.] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 10 Feb, 2015 2 commits
-
-
Bastien Nocera authored
KEY_HOME is the key to go back to the beginning of the line, not the key to get into an overview mode, as Windows does. GNOME can already make use of the Windows key on multiple form factors, and other desktop environments can use it depending on the form factor. Using "Windows" as the emitted key also means that the keycode sent out matches the symbol on the key itself. So switch KEY_HOME to KEY_LEFTMETA ("Windows" key). Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Prepare first round of input updates for 3.20.
-
- 09 Feb, 2015 5 commits
-
-
Linus Torvalds authored
-
git://git.rocketboards.org/linux-socfpga-nextLinus Torvalds authored
Pull nios2 fix from Ley Foon Tan: "This fixes incorrect behavior of some user programs" * tag 'nios2-fixes-v3.19-final' of git://git.rocketboards.org/linux-socfpga-next: nios2: fix unhandled signals
-
git://git.kvack.org/~bcrl/aio-fixesLinus Torvalds authored
Pull aio nested sleep annotation from Ben LaHaise, * git://git.kvack.org/~bcrl/aio-fixes: aio: annotate aio_read_event_ring for sleep patterns
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fixes from Steven Rostedt: "During testing Sedat Dilek hit a "suspicious RCU usage" splat that pointed out a real bug. During suspend and resume the tlb_flush tracepoint is called when the CPU is going offline. As the CPU has been noted as offline, RCU is ignoring that CPU, which means that it can not use RCU protected locks. When tracepoints are activated, they require RCU locking, and if RCU is ignoring a CPU that runs a tracepoint, there is a chance that the tracepoint could cause corruption. The solution was to change the tracepoint into a TRACE_EVENT_CONDITION() which allows us to check a condition to determine if the tracepoint should be called or not. If the condition is not met, the rcu protected code will not be executed. By adding the condition "cpu_online(smp_processor_id())", this will prevent the RCU protected code from being executed if the CPU is marked offline. After adding this, another bug was discovered. As RCU checks rcu callers, if a rcu call is not done, there is no check (obviously). We found that tracepoints could be added in RCU ignored locations and not have lockdep complain until the tracepoint is activated. This missed places where tracepoints were added in places they should not have been. To fix this, code was added in 3.18 that if lockdep is enabled, any tracepoint will still call the rcu checks even if the tracepoint is not enabled. The bug here, is that the check does not take the CONDITION into account. As the condition may prevent tracepoints from being activated in RCU ignored areas (as the one patch does), we get false positives when we enable lockdep and hit a tracepoint that the condition prevents it from being called in a RCU ignored location. The fix for this is to add the CONDITION to the rcu checks, even if the tracepoint is not enabled" * tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/tlb/trace: Do not trace on CPU that is offline tracing: Add condition check to RCU lockdep checks
-
Chung-Ling Tang authored
Follow other architectures for user fault handling. Signed-off-by: Chung-Ling Tang <cltang@codesourcery.com> Acked-by: Ley Foon Tan <lftan@altera.com>
-
- 08 Feb, 2015 2 commits
-
-
Steven Rostedt (Red Hat) authored
When taking a CPU down for suspend and resume, a tracepoint may be called when the CPU has been designated offline. As tracepoints require RCU for protection, they must not be called if the current CPU is offline. Unfortunately, trace_tlb_flush() is called in this scenario as was noted by LOCKDEP: ... Disabling non-boot CPUs ... intel_pstate CPU 1 exiting =============================== smpboot: CPU 1 didn't die... [ INFO: suspicious RCU usage. ] 3.19.0-rc7-next-20150204.1-iniza-small #1 Not tainted ------------------------------- include/trace/events/tlb.h:35 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 0 no locks held by swapper/1/0. stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc7-next-20150204.1-iniza-small #1 Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 0000000000000001 ffff88011a44fe18 ffffffff817e370d 0000000000000011 ffff88011a448290 ffff88011a44fe48 ffffffff810d6847 ffff8800c66b9600 0000000000000001 ffff88011a44c000 ffffffff81cb3900 ffff88011a44fe78 Call Trace: [<ffffffff817e370d>] dump_stack+0x4c/0x65 [<ffffffff810d6847>] lockdep_rcu_suspicious+0xe7/0x120 [<ffffffff810b71a5>] idle_task_exit+0x205/0x2c0 [<ffffffff81054c4e>] play_dead_common+0xe/0x50 [<ffffffff81054ca5>] native_play_dead+0x15/0x140 [<ffffffff8102963f>] arch_cpu_idle_dead+0xf/0x20 [<ffffffff810cd89e>] cpu_startup_entry+0x37e/0x580 [<ffffffff81053e20>] start_secondary+0x140/0x150 intel_pstate CPU 2 exiting ... By converting the tlb_flush tracepoint to a TRACE_EVENT_CONDITION where the condition is cpu_online(smp_processor_id()), we can avoid calling RCU protected code when the CPU is offline. Link: http://lkml.kernel.org/r/CA+icZUUGiGDoL5NU8RuxKzFjoLjEKRtUWx=JB8B9a0EQv-eGzQ@mail.gmail.com Cc: stable@vger.kernel.org # 3.17+ Fixes: d17d8f9d "x86/mm: Add tracepoints for TLB flushes" Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Hansen <dave@sr71.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt (Red Hat) authored
The trace_tlb_flush() tracepoint can be called when a CPU is going offline. When a CPU is offline, RCU is no longer watching that CPU and since the tracepoint is protected by RCU, it must not be called. To prevent the tlb_flush tracepoint from being called when the CPU is offline, it was converted to a TRACE_EVENT_CONDITION where the condition checks if the CPU is online before calling the tracepoint. Unfortunately, this was not enough to stop lockdep from complaining about it. Even though the RCU protected code of the tracepoint will never be called, the condition is hidden within the tracepoint, and even though the condition prevents RCU code from being called, the lockdep checks are outside the tracepoint (this is to test tracepoints even when they are not enabled). Even though tracepoints should be checked to be RCU safe when they are not enabled, the condition should still be considered when checking RCU. Link: http://lkml.kernel.org/r/CA+icZUUGiGDoL5NU8RuxKzFjoLjEKRtUWx=JB8B9a0EQv-eGzQ@mail.gmail.com Fixes: 3a630178 "tracing: generate RCU warnings even when tracepoints are disabled" Cc: stable@vger.kernel.org # 3.18+ Acked-by: Dave Hansen <dave@sr71.net> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
- 07 Feb, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull one more infiniband revert from Roland Dreier: "One more last-second RDMA change for 3.19: Yann realized that the previous revert of new userspace ABI did not go far enough, and we're still exposing a change that we don't want. Revert even closer to 3.18 interface to make sure we get things right in the long run" Yann Droneaud pipes up: "I hope this could go in v3.19 as, at this stage, we don't want to expose any bits of this ABI in a released kernel" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: Revert "IB/core: Add support for extended query device caps"
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fix from Chris Mason: "Forrest Liu tracked down a missing blk_finish_plug in the btrfs logging code. This isn't a new bug, and it's hard to hit. But, it's safe enough for inclusion now, and in my for-linus branch" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: add missing blk_finish_plug in btrfs_sync_log()
-