- 31 Oct, 2018 20 commits
-
-
Eric Biggers authored
This simplifies the code. No change in behavior. Link: http://lkml.kernel.org/r/20180830194814.192880-1-ebiggers@kernel.orgSigned-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Biggers authored
This simplifies the code. No change in behavior. Link: http://lkml.kernel.org/r/20180830194436.188867-1-ebiggers@kernel.orgSigned-off-by:
-
Rasmus Villemoes authored
len is guaranteed to lie in [1, PAGE_SIZE]. If scnprintf is called with a buffer size of 1, it is guaranteed to return 0. So in the extremely unlikely case of having just one byte remaining in the page, let's just call scnprintf anyway. The only difference is that this will write a '\0' to that final byte in the page, but that's an improvement: We now guarantee that after the call, buf is a properly terminated C string of length exactly the return value. Link: http://lkml.kernel.org/r/20180818131623.8755-8-linux@rasmusvillemoes.dkSigned-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Rasmus Villemoes authored
For various alignments of buf, the current expression computes 4096 ok 4095 ok 8190 8189 ... 4097 i.e., if the caller has already written two bytes into the page buffer, len is 8190 rather than 4094, because PTR_ALIGN aligns up to the next boundary. So if the printed version of the bitmap is huge, scnprintf() ends up writing beyond the page boundary. I don't think any current callers actually write anything before bitmap_print_to_pagebuf, but the API seems to be designed to allow it. [akpm@linux-foundation.org: use offset_in_page(), per Andy] [akpm@linux-foundation.org: include mm.h for offset_in_page()] Link: http://lkml.kernel.org/r/20180818131623.8755-7-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
It's not clear what's so horrible about emitting a function call to handle a run-time sized bitmap. Moreover, gcc also emits a function call for a compile-time-constant-but-huge nbits, so the comment isn't even accurate. Link: http://lkml.kernel.org/r/20180818131623.8755-6-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
Most other bitmap API, including the OOL version __bitmap_shift_right, take unsigned nbits. This was accidentally left out from 2fbad299. Link: http://lkml.kernel.org/r/20180818131623.8755-5-linux@rasmusvillemoes.dk Fixes: 2fbad299 ("lib: bitmap: change bitmap_shift_right to take unsigned parameters") Signed-off-by:
Yury Norov <ynorov@caviumnetworks.com> Reviewed-by:
-
Rasmus Villemoes authored
In the _zero, _fill and _copy functions, the small_const_nbits branch is redundant. If nbits is small and const, gcc knows full well that BITS_TO_LONGS(nbits) is 1, so len is also a compile-time constant (sizeof(long)), and calling memset or memcpy with a length argument of sizeof(long) makes gcc generate the expected code anyway: #include <string.h> void a(unsigned long *x) { memset(x, 0, 8); } void b(unsigned long *x) { memset(x, 0xff, 8); } void c(unsigned long *x, const unsigned long *y) { memcpy(x, y, 8); } turns into 0000000000000000 <a>: 0: 48 c7 07 00 00 00 00 movq $0x0,(%rdi) 7: c3 retq 8: 0f 1f 84 00 00 00 00 nopl 0x0(%rax,%rax,1) f: 00 0000000000000010 <b>: 10: 48 c7 07 ff ff ff ff movq $0xffffffffffffffff,(%rdi) 17: c3 retq 18: 0f 1f 84 00 00 00 00 nopl 0x0(%rax,%rax,1) 1f: 00 0000000000000020 <c>: 20: 48 8b 06 mov (%rsi),%rax 23: 48 89 07 mov %rax,(%rdi) 26: c3 retq Link: http://lkml.kernel.org/r/20180818131623.8755-4-linux@rasmusvillemoes.dkSigned-off-by: -
Rasmus Villemoes authored
The static inlines in bitmap.h do not handle a compile-time constant nbits==0 correctly (they dereference the passed src or dst pointers, despite only 0 words being valid to access). I had the 0-day buildbot chew on a patch [1] that would cause build failures for such cases without complaining, suggesting that we don't have any such users currently, at least for the 70 .config/arch combinations that was built. Should any turn up, make sure they use the out-of-line versions, which do handle nbits==0 correctly. This is of course not the most efficient, but it's much less churn than teaching all the static inlines an "if (zero_const_nbits())", and since we don't have any current instances, this doesn't affect existing code at all. [1] lkml.kernel.org/r/20180815085539.27485-1-linux@rasmusvillemoes.dk Link: http://lkml.kernel.org/r/20180818131623.8755-3-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
This promise is violated in a number of places, e.g. already in the second function below this paragraph. Since I don't think anybody relies on this being true, and since actually honouring it would hurt performance and code size in various places, just remove the paragraph. Link: http://lkml.kernel.org/r/20180818131623.8755-2-linux@rasmusvillemoes.dkSigned-off-by:
-
zhong jiang authored
debugfs_remove_recursive() has taken the null pointer into account. just remove the null check before debugfs_remove_recursive(). Link: http://lkml.kernel.org/r/1537494404-16473-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Nick Desaulniers authored
Prefer _THIS_IP_ defined in linux/kernel.h. Most definitions of current_text_addr were the same as _THIS_IP_, but a few archs had inline assembly instead. This patch removes the final call site of current_text_addr, making all of the definitions dead code. [akpm@linux-foundation.org: fix arch/csky/include/asm/processor.h] Link: http://lkml.kernel.org/r/20180911182413.180715-1-ndesaulniers@google.comSigned-off-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Oleksij Rempel authored
I have had various email addresses and a name change after marriage. Link: http://lkml.kernel.org/r/20181009125207.6096-1-o.rempel@pengutronix.deSigned-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by:
-
Souptick Joarder authored
This code can be replaced with vmf_error() inline function. Link: http://lkml.kernel.org/r/20180918145945.GA11392@jordon-HP-15-Notebook-PCSigned-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The concern here is that "gup->size" is a u64 and "nr_pages" is unsigned long. On 32 bit systems we could trick the kernel into allocating fewer pages than expected. Link: http://lkml.kernel.org/r/20181025061546.hnhkv33diogf2uis@kili.mountain Fixes: 64c349f4 ("mm: add infrastructure for get_user_pages_fast() benchmarking") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by:
-
Jérôme Glisse authored
Invalidate device page table at start of invalidation and invalidate in progress CPU page table snapshooting at both start and end of any invalidation. This is helpful when device need to dirty page because the device page table report the page as dirty. Dirtying page must happen in the start mmu notifier callback and not in the end one. Link: http://lkml.kernel.org/r/20181019160442.18723-7-jglisse@redhat.comSigned-off-by:
Jérôme Glisse <jglisse@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
Jérôme Glisse authored
Use a structure to gather all the parameters for the update callback. This make it easier when adding new parameters by avoiding having to update all callback function signature. The hmm_update structure is always associated with a mmu_notifier callbacks so we are not planing on grouping multiple updates together. Nor do we care about page size for the range as range will over fully cover the page being invalidated (this is a mmu_notifier property). Link: http://lkml.kernel.org/r/20181019160442.18723-6-jglisse@redhat.comSigned-off-by:
-
Jérôme Glisse authored
Before this patch migration pmd entry (!pmd_present()) would have been treated as a bad entry (pmd_bad() returns true on migration pmd entry). The outcome was that device driver would believe that the range covered by the pmd was bad and would either SIGBUS or simply kill all the device's threads (each device driver decide how to react when the device tries to access poisonnous or invalid range of memory). This patch explicitly handle the case of migration pmd entry which are non present pmd entry and either wait for the migration to finish or report empty range (when device is just trying to pre- fill a range of virtual address and thus do not want to wait or trigger page fault). Link: http://lkml.kernel.org/r/20181019160442.18723-5-jglisse@redhat.comSigned-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Ralph Campbell authored
In hmm_mirror_unregister(), mm->hmm is set to NULL and then mmu_notifier_unregister_no_release() is called. That creates a small window where mmu_notifier can call mmu_notifier_ops with mm->hmm equal to NULL. Fix this by first unregistering mmu notifier callbacks and then setting mm->hmm to NULL. Similarly in hmm_register(), set mm->hmm before registering mmu_notifier callbacks so callback functions always see mm->hmm set. Link: http://lkml.kernel.org/r/20181019160442.18723-4-jglisse@redhat.comSigned-off-by:
Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Balbir Singh <bsingharora@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ralph Campbell authored
Private ZONE_DEVICE pages use a special pte entry and thus are not present. Properly handle this case in map_pte(), it is already handled in check_pte(), the map_pte() part was lost in some rebase most probably. Without this patch the slow migration path can not migrate back to any private ZONE_DEVICE memory to regular memory. This was found after stress testing migration back to system memory. This ultimatly can lead to the CPU constantly page fault looping on the special swap entry. Link: http://lkml.kernel.org/r/20181019160442.18723-3-jglisse@redhat.comSigned-off-by:
-
Jérôme Glisse authored
Patch series "HMM updates, improvements and fixes", v2 Few fixes that only affect HMM users. Improve the synchronization call back so that we match was other mmu_notifier listener do and add proper support to the new blockable flags in the process. For curious folks here are branches to leverage HMM in various existing device drivers: https://cgit.freedesktop.org/~glisse/linux/log/?h=hmm-nouveau-v01 https://cgit.freedesktop.org/~glisse/linux/log/?h=hmm-radeon-v00 https://cgit.freedesktop.org/~glisse/linux/log/?h=hmm-intel-v00 More to come (amd gpu, Mellanox, ...) I expect more of the preparatory work for nouveau will be merge in 4.20 (like we have been doing since 4.16) and i will wait until this patchset is upstream before pushing the patches that actualy make use of HMM (to avoid complex tree inter-dependency). This patch (of 6): Somehow utf=8 must have been broken. Link: http://lkml.kernel.org/r/20181019160442.18723-2-jglisse@redhat.comSigned-off-by:
-
- 30 Oct, 2018 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: "The biggest change here is the updates to kprobes Back in January I posted patches to create function based events. These were the events that you suggested I make to allow developers to easily create events in code where no trace event exists. After posting those changes for review, it was suggested that we implement this instead with kprobes. The problem with kprobes is that the interface is too complex and needs to be simplified. Masami Hiramatsu posted patches in March and I've been playing with them a bit. There's been a bit of clean up in the kprobe code that was inspired by the function based event patches, and a couple of enhancements to the kprobe event interface. - If the arch supports it (we added support for x86), you can place a kprobe event at the start of a function and use $arg1, $arg2, etc to reference the arguments of a function. (Before you needed to know what register or where on the stack the argument was). - The second is a way to see array of events. For example, if you reference a mac address, you can add: echo 'p:mac ip_rcv perm_addr=+574($arg2):x8[6]' > kprobe_events And this will produce: mac: (ip_rcv+0x0/0x140) perm_addr={0x52,0x54,0x0,0xc0,0x76,0xec} Other changes include - Exporting trace_dump_stack to modules - Have the stack tracer trace the entire stack (stop trying to remove tracing itself, as we keep removing too much). - Added support for SDT in uprobes" [ SDT - "Statically Defined Tracing" are userspace markers for tracing. Let's not use random TLA's in explanations unless they are fairly well-established as generic (at least for kernel people) - Linus ] * tag 'trace-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits) tracing: Have stack tracer trace full stack tracing: Export trace_dump_stack to modules tracing: probeevent: Fix uninitialized used of offset in parse args tracing/kprobes: Allow kprobe-events to record module symbol tracing/kprobes: Check the probe on unloaded module correctly tracing/uprobes: Fix to return -EFAULT if copy_from_user failed tracing: probeevent: Add $argN for accessing function args x86: ptrace: Add function argument access API tracing: probeevent: Add array type support tracing: probeevent: Add symbol type tracing: probeevent: Unify fetch_insn processing common part tracing: probeevent: Append traceprobe_ for exported function tracing: probeevent: Return consumed bytes of dynamic area tracing: probeevent: Unify fetch type tables tracing: probeevent: Introduce new argument fetching code tracing: probeevent: Remove NOKPROBE_SYMBOL from print functions tracing: probeevent: Cleanup argument field definition tracing: probeevent: Cleanup print argument functions trace_uprobe: support reference counter in fd-based uprobe perf probe: Support SDT markers having reference counter (semaphore) ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Masami had a couple more fixes to the synthetic events. One was a proper error return value, and the other is for the self tests" * tag 'trace-v4.19-rc8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests/ftrace: Fix synthetic event test to delete event correctly tracing: Return -ENOENT if there is no target synthetic event
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Only several small fixes and cleanups this time" * tag 'for-linus-4.20a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: drop writing error messages to xenstore xen/pvh: don't try to unplug emulated devices add myself as reviewer for Xen support in Linux xen: remove redundant 'default n' from Kconfig xen/balloon: Support xend-based toolstack xen/pvh: increase early stack size xen: make xen_qlock_wait() nestable xen: fix race in xen_qlock_wait() xen/balloon: Grammar s/Is it/It is/ xen: Make XEN_BACKEND selectable by DomU
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more ACPI updates from Rafael Wysocki: "Rework the handling of the P-unit semaphore on Intel Baytrail and Cherrytrail systems to avoid race conditions and excessive overhead related to it (Hans de Goede)" * tag 'acpi-4.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PMIC: xpower: Add depends on IOSF_MBI to Kconfig entry i2c: designware: Cleanup bus lock handling ACPI / PMIC: xpower: Block P-Unit I2C access during read-modify-write x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management updates from Rafael Wysocki: "These remove a questionable heuristic from the menu cpuidle governor, fix a recent build regression in the intel_pstate driver, clean up ARM big-Little support in cpufreq and fix up hung task watchdog's interaction with system-wide power management transitions. Specifics: - Fix build regression in the intel_pstate driver that doesn't build without CONFIG_ACPI after recent changes (Dominik Brodowski). - One of the heuristics in the menu cpuidle governor is based on a function returning 0 most of the time, so drop it and clean up the scheduler code related to it (Daniel Lezcano). - Prevent the arm_big_little cpufreq driver from being used on ARM64 which is not suitable for it and drop the arm_big_little_dt driver that is not used any more (Sudeep Holla). - Prevent the hung task watchdog from triggering during resume from system-wide sleep states by disabling it before freezing tasks and enabling it again after they have been thawed (Vitaly Kuznetsov)" * tag 'pm-4.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: kernel: hung_task.c: disable on suspend cpufreq: remove unused arm_big_little_dt driver cpufreq: drop ARM_BIG_LITTLE_CPUFREQ support for ARM64 cpufreq: intel_pstate: Fix compilation for !CONFIG_ACPI cpuidle: menu: Remove get_loadavg() from the performance multiplier sched: Factor out nr_iowait and nr_iowait_cpu -
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull more btrfs updates from David Sterba: "This contains a few minor updates and fixes that were under testing or arrived shortly after the merge window freeze, mostly stable material" * tag 'for-4.20-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix use-after-free when dumping free space Btrfs: fix use-after-free during inode eviction btrfs: move the dio_sem higher up the callchain btrfs: don't run delayed_iputs in commit btrfs: fix insert_reserved error handling btrfs: only free reserved extent if we didn't insert it btrfs: don't use ctl->free_space for max_extent_size btrfs: set max_extent_size properly btrfs: reset max_extent_size properly MAINTAINERS: update my email address for btrfs btrfs: delayed-ref: extract find_first_ref_head from find_ref_head Btrfs: fix deadlock when writing out free space caches Btrfs: fix assertion on fsync of regular file when using no-holes feature Btrfs: fix null pointer dereference on compressed write path error
-
Rafael J. Wysocki authored
* pm-cpuidle: cpuidle: menu: Remove get_loadavg() from the performance multiplier sched: Factor out nr_iowait and nr_iowait_cpu * pm-cpufreq: cpufreq: remove unused arm_big_little_dt driver cpufreq: drop ARM_BIG_LITTLE_CPUFREQ support for ARM64 cpufreq: intel_pstate: Fix compilation for !CONFIG_ACPI
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This migrates rpmsg_char to use read/write_iter to allow being operated using aio, removes the message size alignment requirements from glink, closes a potential memory leak in SMD and switches to %pOFn for printing device_node names" * tag 'rpmsg-v4.20' of git://github.com/andersson/remoteproc: rpmsg: glink: smem: Support rx peak for size less than 4 bytes rpmsg: smd: fix memory leak on channel create rpmsg: glink: Remove chunk size word align warning rpmsg: Convert to using %pOFn instead of device_node.name rpmsg: char: Migrate to iter versions of read and write
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "This contains a series of patches that reworks the memory carveout handling in remoteproc, in order to allow this to be reused for statically allocated memory regions to be used for e.g. firmware. It adds support for audio DSP (both TZ-assisted and non-TZ assisted) and compute DSP on Qualcomm SDM845, TZ-assisted audio DSP, compute DSP and WiFi processor on Qualcomm QCS404 and through some renaming of the drivers cleans up the naming situation. Finally support for custom coreudmp segment handlers is added and is used in the Qualcomm modem remoteproc driver to gather memory dumps of the firmware" * tag 'rproc-v4.20' of git://github.com/andersson/remoteproc: (36 commits) remoteproc: qcom: q6v5-mss: Register segments/dumpfn for coredump remoteproc: qcom: q6v5-mss: Add custom dump function for modem remoteproc: qcom: q6v5-mss: Refactor mba load/unload sequence remoteproc: Add mechanism for custom dump function assignment remoteproc: Introduce custom dump function for each remoteproc segment remoteproc: modify vring allocation to rely on centralized carveout allocator remoteproc: qcom: q6v5: shore up resource probe handling remoteproc: qcom: qcom_q6v5_adsp: Fix some return value check remoteproc: modify rproc_handle_carveout to support pre-registered region remoteproc: add helper function to check carveout device address remoteproc: add helper function to allocate rproc_mem_entry from reserved memory remoteproc: add alloc ops in rproc_mem_entry struct remoteproc: introduce rproc_find_carveout_by_name function remoteproc: introduce rproc_add_carveout function remoteproc: add helper function to allocate and init rproc_mem_entry struct remoteproc: add name in rproc_mem_entry struct remoteproc: add release ops in rproc_mem_entry struct remoteproc: add rproc_va_to_pa function remoteproc: configure IOMMU only if device address requested remoteproc: qcom: q6v5-mss: add SCM probe dependency ...
-
- 29 Oct, 2018 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC platform updates from Arnd Bergmann: "A couple of platforms change hands in the MAINTAINERS file: - Linus Walleij lists himself for the ARM Reference platforms: versatile, vexpress, integrator and realview. He has been the main contributor for these for a while, and makes it official now. - Vladimir Zapolskiy takes over the LPC18xx platform from Joachim Eastwood - Manivannan Sadhasivam becomes a secondary maintainer for the Actions Semi machines - Nicolas Ferre lists updates the MAINTAINER listing for the AT91 platform: Ludovic Desroches is now a co-maintainer for the platform, and several other people (Claudiu Beznea, Cristian Birsan, Eugen Hristev, Codrin Ciubotariu) take over individual device drivers. Thanks everyone for working on this, and welcome to the new maintainers! The "virt" platform on qemy or kvm can now be used in big-endian mode without additional tricks, thanks to Jason Donenfeld. Once again, we gain support for another NXP i.MX6 variant, this time it's the i.MX 6ULZ 32-bit single-core version. On arm64, we add support for two SoCs from Renesas: RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1). These are described as microcontrollers on the manufacturer website, but appear to be rather powerful. The RZ/G2M is used on the reference board for the CIP Super Long Term Support (SLTS) Linux Kernels" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) MAINTAINERS: Assign myself as a maintainer of ARM/LPC18XX architecture arm64: exynos: Enable generic power domain support MAINTAINERS: remove non-exsiting email address of Baoyou MAINTAINERS: fix pattern in ARM/Synaptics berlin SoC section MAINTAINERS: Drop dt-bindings/genpd/k2g.h ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms arm64: actions: Enable PINCTRL in platforms Kconfig MAINTAINERS: Add entry for Actions Semi Owl SoCs DMA driver MAINTAINERS: Add entry for Actions Semiconductor Owl I2C driver MAINTAINERS: Update clock binding entry for Actions Semi Owl SoCs ARM: imx: add i.mx6ulz msl support ARM: Assume maintainership of ARM reference designs ARM: support big-endian for the virt architecture MAINTAINERS: sdhci: move the Microchip entry to proper location MAINTAINERS: move former ATMEL entries to proper MICROCHIP location MAINTAINERS: remove the / ATMEL string from MICROCHIP entries MAINTAINERS: iio: add co-maintainer to SAMA5D2-compatible ADC driver MAINTAINERS: pwm: add entry for Microchip pwm driver MAINTAINERS: dmaengine: add files to Microchip dma entry MAINTAINERS: USB: change maintainer for Microchip USBA gadget driver ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC driver updates from Arnd Bergmann: "The most noteworthy SoC driver changes this time include: - The TEE subsystem gains an in-kernel interface to access the TEE from device drivers. - The reset controller subsystem gains a driver for the Qualcomm Snapdragon 845 Power Domain Controller. - The Xilinx Zynq platform now has a firmware interface for its platform management unit. This contains a firmware "ioctl" interface that was a little controversial at first, but the version we merged solved that by not exposing arbitrary firmware calls to user space. - The Amlogic Meson platform gains a "canvas" driver that is used for video processing and shared between different high-level drivers. The rest is more of the usual, mostly related to SoC specific power management support and core drivers in drivers/soc: - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new features related to power and reset control. - The Mediatek mt8183 and mt6765 SoC platforms gain support for their respective power management chips. - A new driver for NXP i.MX8, which need a firmware interface for power management. - The SCPI firmware interface now contains support estimating power usage of performance states - The NVIDIA Tegra "pmc" driver gains a few new features, in particular a pinctrl interface for configuring the pads. - Lots of small changes for Qualcomm, in particular the "smem" device driver. - Some cleanups for the TI OMAP series related to their sysc controller. Additional cleanups and bugfixes in SoC specific drivers include the Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits) firmware: tegra: bpmp: Implement suspend/resume support drivers: clk: Add ZynqMP clock driver dt-bindings: clock: Add bindings for ZynqMP clock driver firmware: xilinx: Add zynqmp IOCTL API for device control Documentation: xilinx: Add documentation for eemi APIs MAINTAINERS: imx: include drivers/firmware/imx path firmware: imx: add misc svc support firmware: imx: add SCU firmware driver support reset: Fix potential use-after-free in __of_reset_control_get() dt-bindings: arm: fsl: add scu binding doc soc: fsl: qbman: add interrupt coalesce changing APIs soc: fsl: bman_portals: defer probe after bman's probe soc: fsl: qbman: Use last response to determine valid bit soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers soc: fsl: qbman: Check if CPU is offline when initializing portals reset: qcom: PDC Global (Power Domain Controller) reset controller dt-bindings: reset: Add PDC Global binding for SDM845 SoCs reset: Grammar s/more then once/more than once/ bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC defconfig updates from Arnd Bergmann: "The defconfig changes are split out from the rest again. This time we have a number of changes for NXP i.MX and Renesas, including a cleanup of old options. Some smaller changes are for Socionext Uniphier, Allwinner, Qualcomm, Rockchip, Renesas, AT91, Hisilicon, and STM32. All of these just enable platform specific device drivers" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) arm64: defconfig: Enable SERIAL_8250_OMAP arm64: defconfig: Enable TI_SCI related configs ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACL ARM: imx_v4_v5_defconfig: Remove unneeded options ARM: imx_v4_v5_defconfig: Re-sync defconfig ARM: mxs_defconfig: Remove unneeded options ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v6_v7_defconfig: Remove unneeded options ARM: imx_v6_v7_defconfig: Re-sync defconfig ARM: imx_v6_v7_defconfig: select CONFIG_ARM_CPUIDLE by default ARM: imx_v6_v7_defconfig: Make usbnet drivers builtin for boot ARM: imx_v6_v7_defconfig: add CONFIG_FW_LOADER_USER_HELPER ARM: imx_v6_v7_defconfig: Select CONFIG_SENSORS_MC13783_ADC ARM: multi_v7_defconfig: enable CONFIG_MMC_UNIPHIER arm64: defconfig: enable CONFIG_MMC_UNIPHIER ARM: multi_v7_defconfig: Enable USB phys for UniPhier SoCs arm64: defconfig: Enable USB phys for UniPhier SoCs arm64: defconfig: enable Rockchip Innosilicon hdmiphy arm64: defconfig: Enable PCIEPORTBUS arm64: defconfig: enable HiSilicon HNS3 driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC device tree updates from Arnd Bergmann: "There are close to 800 indivudal changesets in this branch again, which feels like a lot. There are particularly many changes for the NVIDIA Tegra platform this time, in fact more than it has seen in the two years since the v4.9 merge window. Aside from this, it's been fairly normal, with lots of changes going into Renesas R-CAR, NXP i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP. Most of the changes are for adding new features into existing boards, for brevity I'm only mentioning completely new machines and SoCs here. For the first time I think we have (slightly) more new 64-bit hardware than 32-bit: Two boards get added for TI OMAP: Moxa UC-2101 is an industrial computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a minor variation of the motherboards of the GTA04 phone, see https://shop.goldelico.com/wiki.php?page=GTA04A5 Clearfog is a nice little board for quad-core Marvell Armada 8040 network processor, see https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/ Two additional server boards come with the Aspeed baseboard management controllers: Stardragon4800 is an arm64 reference platform made by HXT (based on Qualcomm's server chips), and TiogaPass is an Open Compute mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the BMC. NXP i.MX usually sees a lot of new boards each release. This time there we only add one minor variant: ConnectCore 6UL SBC Pro uses the same SoM design as the ConnectCore 6UL SBC Express added later. However, there is a new chip, the i.MX6ULZ, which is an even smaller variant of the i.MX6ULL, with features removed. There is also support for the reference board design, the i.MX6ULZ 14x14 EVK. A new Raspberry Pi variant gets added, this one is the CM3 compute module based on bcm2837, it was launched in early 2017 but only now added to the kernel, both as 32-bit and as 64-bit files, as we tend to do for Raspberry Pi. On the Allwinner side, everything is again about cheap development boards, usually of the "Fruit Pi" variety. The new ones this time are: - Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/ - Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/ - Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts - Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html The last one of these is now a 64-bit version of the earlier Banana Pi M2+ H3, with the same board layout. Similarly, for Rockchips, get get another variant of the 32-bit Asus Tinker board, the model 'S' based on rk3288, and three now boards based on the popular RK3399 chip: - ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/ - Rock960: https://www.96boards.org/product/rock960/ - RockPro64: https://www.pine64.org/?page_id=61454 These are all quite powerful boards with lots of RAM and I/O, and the RK3399 is the same chip used in several Chromebooks. Finally, we get support for the PX30 (aka rk3326) chip, which is based on the low-end 64-bit Cortex-A35 CPU core. So far, only the evaluation board is supported. One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is based on the MT7622 WiFi router platform, and the first product I've seen with a 64-bit Mediatek chip in that market: http://www.banana-pi.org/r64.html For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370 development board, which are similar to the Hi3660 and Hikey 360 respectively, but add support for an NPU. Amlogic gets initial support for the Meson-G12A chip (S905D2), another quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit side, we gain support for an actual end-user product, the Endless Computers Endless Mini based on Meson8b (S805), see https://endlessos.com/computers/ Qualcomm adds support for their MSM8998 SoC and evaluation platform. This chip is commonly known as the Snapdragon 835, and is used in high-end phones as well as low-end laptops. For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added, but no boards for this one. However, we do add boards for the previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the M3NULCB Starter Kit Pro. While we have lots of DT changes for NVIDIA to update the existing files, the only board that gets added is the Toradex Colibri T20 on Colibri Evaluation Board for the old Tegra2. Synaptics add support for their AS370 SoC, which is part of the (formerly Marvell) Berlin line of set-top-box chips used e.g. in the various Google Chromecast. Only the .dtsi gets added at this point, no actual machines" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits) ARM: dts: socfgpa: remove ethernet aliases from dtsi arm64: dts: stratix10: add ethernet aliases dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI dt-bindings: mediatek: Add JPEG Decoder binding for MT7623 dt-bindings: iommu: mediatek: Add binding for MT7623 dt-bindings: clock: mediatek: add support for MT7623 ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites ARM: dts: da850-lego-ev3: slow down A/DC as much as possible ARM: dts: da850-evm: Enable tca6416 on baseboard arm64: dts: uniphier: Add USB2 PHY nodes arm64: dts: uniphier: Add USB3 controller nodes ARM: dts: uniphier: Add USB2 PHY nodes ARM: dts: uniphier: Add USB3 controller nodes arm64: dts: meson-axg: s400: disable emmc arm64: dts: meson-axg: s400: add missing emmc pwrseq arm64: dts: clearfog-gt-8k: add PCIe slot description ARM: dts: at91: sama5d4_xplained: even nand memory partitions ARM: dts: at91: sama5d3_xplained: even nand memory partitions ARM: dts: at91: at91sam9x5cm: even nand memory partitions ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc updates from Helge Deller: "Three small patches: - A boot fix for A500 machines, crash was caused by the new alternative patching code from this merge window (Dave) - Change __kernel_suseconds_t to match glibc on 64-bit parisc (Arnd) - Use constants instead of hard-coded numbers (me)" * 'parisc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix A500 boot crash parisc: Use LINUX_GATEWAY_SPACE constant in entry.S parisc64: change __kernel_suseconds_t to match glibc -
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "I2C has not so much stuff this time. Mostly driver enablement for new SoCs, some driver bugfixes, and some cleanups" * 'i2c/for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (35 commits) MAINTAINERS: add maintainer for Renesas RIIC driver i2c: sh_mobile: Remove dummy runtime PM callbacks i2c: uniphier-f: fix race condition when IRQ is cleared i2c: uniphier-f: fix occasional timeout error i2c: uniphier-f: make driver robust against concurrency i2c: i2c-qcom-geni: Simplify irq handler i2c: i2c-qcom-geni: Simplify tx/rx functions i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers i2c: mux: mlxcpld: simplify code to reach the adapter i2c: mux: ltc4306: simplify code to reach the adapter i2c: mux: pca954x: simplify code to reach the adapter i2c: core: remove level of indentation in i2c_transfer i2c: core: remove outdated DEBUG output i2c: zx2967: use core to detect 'no zero length' quirk i2c: tegra: use core to detect 'no zero length' quirk i2c: qup: use core to detect 'no zero length' quirk i2c: omap: use core to detect 'no zero length' quirk i2c: Convert to using %pOFn instead of device_node.name i2c: brcmstb: Allow enabling the driver on DSL SoCs eeprom: at24: fix unexpected timeout under high load ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: - new dvb frontend driver: lnbh29 - new sensor drivers: imx319 and imx 355 - some old soc_camera driver renames to avoid conflict with new drivers - new i.MX Pixel Pipeline (PXP) mem-to-mem platform driver - a new V4L2 frontend for the FWHT codec - several other improvements, bug fixes, code cleanups, etc * tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (289 commits) media: rename soc_camera I2C drivers media: cec: forgot to cancel delayed work media: vivid: Support 480p for webcam capture media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD media: vivid: Add 16-bit bayer to format list media: v4l2-tpg-core: Add 16-bit bayer media: pvrusb2: replace `printk` with `pr_*` media: venus: vdec: fix decoded data size media: cx231xx: fix potential sign-extension overflow on large shift media: dt-bindings: media: rcar_vin: add device tree support for r8a7744 media: isif: fix a NULL pointer dereference bug media: exynos4-is: make const array config_ids static media: cx23885: make const array addr_list static media: ivtv: make const array addr_list static media: bttv-input: make const array addr_list static media: cx18: Don't check for address of video_dev media: dw9807-vcm: Fix probe error handling media: dw9714: Remove useless error message media: dw9714: Fix error handling in probe function media: cec: name for RC passthrough device does not need 'RC for' ...
-
Chris Brandt authored
The RIIC I2C controller is used in Renesas RZ/A SoCs. Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> [wsa: added documentation file] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Jarkko Nikula authored
Platform drivers don't need dummy runtime PM callbacks that just return success and non-NULL pm pointer in their struct device_driver in order to have runtime PM happening. This has changed since following commits: 05aa55dd ("PM / Runtime: Lenient generic runtime pm callbacks") 543f2503 ("PM / platform_bus: Allow runtime PM by default") 8b313a38 ("PM / Platform: Use generic runtime PM callbacks directly") Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Masahiro Yamada authored
The current IRQ handler clears all the IRQ status bits when it bails out. This is dangerous because it might clear away the status bits that have just been set while processing the current handler. If this happens, the IRQ event for the latest transfer is lost forever. The IRQ status bits must be cleared *before* the next transfer is kicked. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
Currently, a timeout error could happen at a repeated START condition. For a (non-repeated) START condition, the controller starts sending data when the UNIPHIER_FI2C_CR_STA bit is set. However, for a repeated START condition, the hardware starts running when the slave address is written to the TX FIFO - the write to the UNIPHIER_FI2C_CR register is actually unneeded. Because the hardware is already running before the IRQ is enabled for a repeated START, the driver may miss the IRQ event. In most cases, this problem does not show up since modern CPUs are much faster than the I2C transfer. However, it is still possible that a context switch happens after the controller starts, but before the IRQ register is set up. To fix this, - Do not write UNIPHIER_FI2C_CR for repeated START conditions. - Enable IRQ *before* writing the slave address to the TX FIFO. - Disable IRQ for the current CPU while queuing up the TX FIFO; If the CPU is interrupted by some task, the interrupt handler might be invoked due to the empty TX FIFO before completing the setup. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
-
