Signed-off-by: Russell King <rmk@arm.linux.org.uk>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

- If dst/src are equal, memcpy can be used.
- Eliminate register writes which were unused
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Tony Luck <tony.luck@intel.com>

Patch from Christoph Hellwig to:
- irq_desc and irq_to_vector machvecs.  SN2 has it's own versions,
  but they're the same as the generic ones
- kill do do_IRQ and use __do_IRQ directly everywhere
- kill dead X86 ifdefs
- move some variable declarations around in irq.c to recuce # of ifdefs
Signed-off-by: Tony Luck <tony.luck@intel.com>

When I converted the sn2 code over to the new DMA API, I left the old routines
in place and added wrappers to call them from the generic DMA API functions.
This added an unnecessary level of obfuscation since the generic ia64 code
calls those functions when any of the old style PCI DMA API functions are
called.  This patch rectifies the problem making the code much easier to
understand and hopefully a little more efficient (though I'm sure gcc was
already inlining things pretty well, there were a bunch of unnecessary checks
that I took this opportunity to remove).  It also shrinks the size of the sn2
pci_dma.c quite a bit.
 
  pci_dma.c |  480 +++++++++++++++++++-----------------------------------------
  1 files changed, 151 insertions(+), 329 deletions(-)
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

sn2 does early initialization of the SAL so it can use it for early console
support.  Unfortunately, the loop to find the SAL entry point was buggy so
when we tried out new EFI and SAL system table layouts, the loop didn't
terminate.  Here's the fix (doh!, use two different loop counters instead of
one and just return if we find the SAL entry point).
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Ok, here you go Tony.  This one fixes the loop and also fixes drm_vm.c.  All
of the bits aside from the efi.h bit are ia64 specific (either under
arch/ia64 or __ia64__), so your tree is probably the right place for all of
it.
 
This patch adds efi_range_is_wc() to efi.h.  It's used to determine whether an
address range can be mapped with the write coalescing attribute.  It also
fixes up some ia64 specific callers to use the new routine instead of
unconditionally calling pgprot_writecombined, which can be dangerous if used
on ranges that don't support it.
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

The following patch fixes the ia64_pal_prefetch_visibility function to
take a transaction type argument for either virtual or physical memory
as specified in the System Architechture Manual page 2:358.
Signed-Off-By: Jes Sorensen <jes@trained-monkey.org>
Signed-Off-By: Tony Luck <tony.luck@intel.com>

Problem:
	There exists a case where we stop monitoring, i.e. clear
	psr.pp/dcr.pp, via IPI. This is when the stop is triggered
	by a close(), either explicit in the application or implicit
	via exit_files(). The IPI is necessary because at the time the
	thread (controlling the context) issues a close() it may not run
	on the CPU the context is bound to. Yet the call must succeed,
	hence we need to propagate the call to the right CPU.
	But what is the problem then?
	Under IPI, we invoke a perfmon routine which clear the kernel
	(live) kernel psr.pp bit and also dcr.pp. Then we return from
	the function and execute the kernel exit path which restores
	the interrupted state. Unfortunately, this restores the kernel
	psr from ipsr which now contains a stale value. Therefore
	monitoring in the kernel will be active even though we stopped it.
	You cannot modify the "global" psr in an interrupt routine because
	it will be systematically restored on the way back.
	
Solution:
	We need to patch ipsr.pp in the kernel exit path to reflect the
	kernel value of the kernel psr.pp bit. This must be done only when
	returning to kernel. 

	The proposed patch does patch ipsr.pp such that it is identical
	to psr.pp. The patch is subtle because the exit path does not have
	a lot of free registers and also because we need to schedule for
	a psr read. I had to shuffle  things around a little bit.

	The patch is important because there will be another situation where
	this problem can occur once we incorporate the support for event set
	and multiplexing. In this configuration, you may be in the middle of
	the idle loop and on a timer interrupt, you may stop monitoring.
	Slightly different condition, yet same problem with ipsr.pp vs. psr.pp.


Changelog:
	- update kernel exit path when returning to kernel to copy
	psr.pp to ipsr.pp. This is necesary to ensure that if psr.pp
	was modified during the kernel entry, the change is propagated
	the the psr.pp of the of the interrupted thread. Psr.pp can
	be modified as a consequence of an IPI under certain conditions,
	such as when a system-wide context is closed from a remote CPU.

Special thanks to David for reworking the patch to fit
into the enhanced exit path.
signed-off-by: stephane eranian <eranian@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Patch from yanmin.zhang@intel.com to fix up some corner cases
in ptrace.  Many thanks to davidm for reviewing and improving.
Signed-off-by: Tony Luck <tony.luck@intel.com>

Label is unused, and so the compiler generates a warning.
Signed-off-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Use srlz.d instead of srlz.i.  Safe because we don't care whether
the VHPT walker sees the clearing of PSR.ic (if it does, that's fine
if it doesn't, it's OK too since the kernel-text is pinned anyhow).
Good for another 11+ cycles in (normal) getpid().
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Optimize ia64_leave_syscall() a bit better for McKinley-type cores.
The patch looks big, but that's mostly due to renaming r16/r17 to r2/r3.
Good for a 13 cycle improvement.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Trivial patch: align rse_clear_invalid to 32-byte boundary.  Good for
a 9 cycle speed up.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Kernel-threads had both pUStk and pKStk set to FALSE, which was
unintentional.  I don't think the bug has shown any ill effects, but
it's clearly wrong and could come around to bite us later, so let's
fix it now.  Depends on the previous patch to clean up C usage of the
global/root-function predicates.
Signed-off-by: Tony Luck <tony.luck@intel.com>

 
The patch below is purely a cleanup but it's a prerequisite for the
next bug fix patch.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

The fixed sized array of pages that are isolated because of 2xECC
memory errors can run out.  Increasing the size of the array is a
band-aid measure, the real fix will require changes to generic code
to add some bits to page_flags so that pages with errors can be
marked so as to prevent them ever being examined.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

When compiling for non-NUMA variable "node" ended up not being used,
which solicits a warning from GCC.  Fix is to evluate cpu_to_node(i)
in place.  This has the effect of doing cpu_to_node(i) twice on NUMA,
but this is init code, so performance is not an issue (and even if
it were, you can just declare cpu_to_node() as being a pure function,
so the compiler can eliminate the second call).
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

I was getting a lot of spurious warnings with "make C=1", due to a
missing "__user" attribute.  I'm not sure whether this got lost or
whether earlier versions of sparse failed to warn about it, but it's
clearly needed (and the i386 version of uaccess.h does the same).
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

It seems that in ia64_elf32_init, instead of calling return, if we insert
an overlapping vma, we should instead BUG(). We should never get into this
code path, because the vma's are set above PAGE_OFFSET, and thus a
Xmalicious user can not trigger this code path. This change is being
suggested mainly for clarity. Thanks to Stephen Tweedie for pointing out
that returning early in ia64_elf32_init could have unpredictable results.
Signed-off-by: Tony Luck <tony.luck@intel.com>

Fix the error handling for the SN2 hardware perf ioctl interface.
Signed-off-by: Mark Goodwin <markgw@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

- [DVB] dvb-ttpci: re-added support for Fujitsu-Siemens DVB-S rev 1.6 0x13c2:0x0006
- [DVB] dvb-ttpci: finally clean up debi irq/tasklet handling to make it work on SMP
- [DVB] dvb-ttpci: misc. changes to av7110_send_fw_cmd() error handling done along the way
- [DVB] dvb-ttpci: budgetpatch integrated into dvb-ttpci: enables full ts option running
        in parallel with all previous functions of dvb-ttpci
- [DVB] dvb-ttpci: fix Oops provoked by insmod/rmmod test loop, patch by Emard
- [DVB] budget: Fixed start_ts_capture(): saa7146 will not issue a VPE interrupt
        if VPE bit is set in PSR and VPE interrupts are enabled afterwards.
- [DVB] budget: enable satelco support. code was commented out, but actually it works, patch by Emard
- [DVB] budget: Budget patch improved driver, fixed slight packet loss by using different trigger mode
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- [DVB] mt352: exported a mt352_read_reg-function, implemented a single byte
        write_register function (needed for dibusb)
- [DVB] nxt2002: patch by Taylor Jacob to add support for ATSC/VSB frontends
        and the B2C2/BBTI Air2PC-ATSC card
- [DVB] stv0297: fix tuning problems and compile time warnings, patch by Markus Breitenberger
- [DVB] fix spelling errors in various frontend drivers
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- [DVB] dib3000: driver refactoring, makes it easier to support device clones
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- [DVB] dvb-core: vfree() checking cleanups, patch by Domen Puncer
- [DVB] dvb-core: fix handling of discontinuity indicator in section filter,
        bug reported by Frank Rosengart
- [DVB] dvb-core: handle PUSI in section filter correctly, patch by Emard,
        bug reported by Patrick Valsecchi
- [DVB] dvb-core: add support for ATSC/VSB frontends, patch by Taylor Jacob
- [DVB] dvb-core: removed semi-colon from a very wrong place; FE_ENABLE_HIGH_LNB_VOLTAGE
        kernel oops; thanks to Christophe Massiot
- [DVB] dvb-core: Fixed slow tuning problems, remove frequeny bending support from
        frontend code, code simplification
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- [DVB] nxt2002: add support for nxt2002 frontend (firmware extraction, Kconfig, driver)
- [DVB] skystar2: misc cleanup, remove unneeded casts, remove unreachable
        code, patches by Francois Romieu
- [DVB] skystar2: fix mt352 clock setting for VHF (6 and 7 MHz bw channels),
        patch by Thomas Martin and Dieter Zander:
- [DVB] b2c2-usb-core: fix file permissions to be octal, ISO C90 compile fix,
        temporally repaired the request_types
- [DVB] remove remains of dibusb driver after splitup
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- [DVB] dvb-dibusb: refactoring of the dibusb driver, support for device clones
        from Yakumo/HAMA/Typhoon/HanfTek, update the documentation
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- [DVB] dvb-bt8xx: add support for pinnacle pctv-sat, patch by Peter Hettkamp and Adam Szalkowski
- [DVB] dvb-bt8xx: minor code cleanups, patch by Arne Ahrend
- [DVB] dvb-bt8xx: make sure to compile all necessary frontend modules, remove misleading comment
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>