- 17 Nov, 2018 3 commits
-
-
Michał Mirosław authored
Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Wrap VLAN_PRESENT bit using macro like PKT_TYPE_* and CLONED_*, as used by BPF code. Signed-off-by:
-
- 16 Nov, 2018 1 commit
-
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - Bump version strings, by Simon Wunderlich - Fixup includes, by Sven Eckelmann (3 patches) - Separate BATMAN_ADV_DEBUG from DEBUGFS, by Sven Eckelmann - Fixup tracing log documentation, by Sven Eckelmann - Use exclusive locks to secure netlink information dump transfers, by Sven Eckelmann (8 patches) - Move CRC16 dependency, by Sven Eckelmann - Enable MCAST by default, by Linus Luessing ==================== Signed-off-by:
-
- 15 Nov, 2018 28 commits
-
-
Li RongQing authored
netperf udp stream shows that eth_type_trans takes certain cpu, so adjust the mac address check order, and firstly check if it is device address, and only check if it is multicast address only if not the device address. After this change: To unicast, and skb dst mac is device mac, this is most of time reduce a comparision To unicast, and skb dst mac is not device mac, nothing change To multicast, increase a comparision Before: 1.03% [kernel] [k] eth_type_trans After: 0.78% [kernel] [k] eth_type_trans Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Li RongQing authored
if list is NULL pointer, and the following access of list will trigger panic, which is same as BUG_ON Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-11-14 This series contains updates to i40e and virtchnl. Lance Roy updates i40e to use lockdep_assert_held() instead of spin_is_locked(), since it is better suited to check locking requirements. Jan improves the code readability in XDP by adding the use of a local variable. Provides protection on methods that create/modify/destroy VF's via locking mechanism to prevent unstable behaviour and potential kernel panics. Krzysztof adds a hardware capability flag to indicate whether firmware supports stopping the LLDP agent. Patryk replaces the use of strncpy() with strlcpy() to ensure the buffer is NULL terminated. Mitch fixes the issue of trying to start nway on devices that do not support auto-negotiation, by checking the autoneg state before attempting to restart nway. Alice updates virtchnl to keep the checks all together for ease of readability and consistency. Also fixed a "off by one" error in the number of traffic classes being calculated. Richard fixed VF port VLANs, where the priority bits were incorrectly set because the incorrect shift and mask bits were being used. Alan adds a bit to set and check if a timeout recovery is already pending to prevent overlapping transmit timeout recovery. ==================== Signed-off-by: -
David S. Miller authored
lib/test_objagg.c: In function ‘test_delta_action_item’: ./include/linux/printk.h:308:2: warning: ‘errmsg’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: -
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: spectrum: acl: Introduce ERP sharing by multiple masks Jiri says: The Spectrum-2 hardware has limitation number of ERPs per-region. In order to accommodate more masks than number of ERPs, the hardware supports to insert rules with delta bits. By that, the rules with masks that differ in up-to 8 consecutive bits can share the same ERP. Patches 1 and 2 fix couple of issues that would appear in existing selftests after adding delta support Patch 3 introduces a generic object aggregation library. Now it is static, but it will get extended for recalculation of aggregations in the future in order to reach more optimal aggregation. Patch 4 just simply converts existing ERP code to use the objagg library instead of a rhashtable. Patches 5-9 do more or less small changes to prepare ground for the last patch. Patch 10 fills-up delta callbacks of objagg library and utilizes the delta bits for rule insertion. The last patch adds selftest to test the mlxsw Spectrum-2 delta flows. ==================== Signed-off-by: -
Jiri Pirko authored
Track the basic codepaths of delta handling, using objagg tracepoints. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Allow ERP sharing for multiple mask. Do it by properly implementing delta_create() objagg object. Use the computed delta info for inserting rules in A-TCAM. Signed-off-by:
-
Jiri Pirko authored
Later on the same code is going to be needed for deltas as well. So push the procedures related to increment and decrement of num_ctcam_erps into a separate helpers. Signed-off-by:
-
Jiri Pirko authored
Since two remaining users of mlxsw_afk_encode() do not specify block ranges to work on, remove the args. Also, key/mask is always non-NULL now, so skip the checks. Signed-off-by:
-
Jiri Pirko authored
No need to do key encoding again in mlxsw_sp_acl_atcam_12kb_lkey_id_get(). Instead of that, introduce a new helper that would just clear unused blocks. Signed-off-by:
-
Jiri Pirko authored
Change order so it is aligned with the usual case where the "write_to" buffer comes as the first arg. Signed-off-by:
-
Jiri Pirko authored
The device requires that the master mask of each region will be composed from a logical OR between all the unmasked bits in the region. Currently, this is just a logical OR between all the eRPs used in the region, but the next patch is going to introduce delta bits support which need to be taken into account as well. Since the eRP does not include the delta bits, pass the key pointer to mlxsw_sp_acl_erp_master_mask_set/clear instead. Convert key->mask to the bitmap on fly. Signed-off-by:
-
Jiri Pirko authored
Currently the ERPs are tracked internally in a hashtable. Benefit from the newly introduced objagg library and use it to track ERPs. At this point, there is no nesting of objects done, as the delta_create callback always returns -EOPNOTSUPP. On the way, add "mask" into ERP mask get and set functions and struct names. Signed-off-by:
-
Jiri Pirko authored
This lib tracks objects which could be of two types: 1) root object 2) nested object - with a "delta" which differentiates it from the associated root object The objects are tracked by a hashtable and reference-counted. User is responsible of implementing callbacks to create/destroy root entity related to each root object and callback to create/destroy nested object delta. Signed-off-by: -
Jiri Pirko authored
In order for this to behave as required with delta bits, change the mask for rule with handle 103. Signed-off-by:
-
Jiri Pirko authored
In order for this to behave as required with delta bits, change the mask for rule with handle 103. Signed-off-by:
-
Cong Wang authored
__tcp_checksum_complete() is 100% same with __skb_checksum_complete() and there is no other caller except tcp_checksum_complete(). So, just use __skb_checksum_complete() there. Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Amritha Nambiar authored
Added support in tc flower for filtering based on port ranges. Example: 1. Match on a port range: ------------------------- $ tc filter add dev enp4s0 protocol ip parent ffff:\ prio 1 flower ip_proto tcp dst_port range 20-30 skip_hw\ action drop $ tc -s filter show dev enp4s0 parent ffff: filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 ip_proto tcp dst_port range 20-30 skip_hw not_in_hw action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 85 sec used 3 sec Action statistics: Sent 460 bytes 10 pkt (dropped 10, overlimits 0 requeues 0) backlog 0b 0p requeues 0 2. Match on IP address and port range: -------------------------------------- $ tc filter add dev enp4s0 protocol ip parent ffff:\ prio 1 flower dst_ip 192.168.1.1 ip_proto tcp dst_port range 100-200\ skip_hw action drop $ tc -s filter show dev enp4s0 parent ffff: filter protocol ip pref 1 flower chain 0 handle 0x2 eth_type ipv4 ip_proto tcp dst_ip 192.168.1.1 dst_port range 100-200 skip_hw not_in_hw action order 1: gact action drop random type none pass val 0 index 2 ref 1 bind 1 installed 58 sec used 2 sec Action statistics: Sent 920 bytes 20 pkt (dropped 20, overlimits 0 requeues 0) backlog 0b 0p requeues 0 v4: 1. Added condition before setting port key. 2. Organized setting and dumping port range keys into functions and added validation of input range. v3: 1. Moved new fields in UAPI enum to the end of enum. 2. Removed couple of empty lines. v2: Addressed Jiri's comments: 1. Added separate functions for dst and src comparisons. 2. Removed endpoint enum. 3. Added new bit TCA_FLOWER_FLAGS_RANGE to decide normal/range lookup. 4. Cleaned up fl_lookup function. Signed-off-by:Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by:
-
Cong Wang authored
Currently netdev_rx_csum_fault() only shows a device name, we need more information about the skb for debugging csum failures. Sample output: ens3: hw csum failure dev features: 0x0000000000014b89 skb len=84 data_len=0 pkt_type=0 gso_size=0 gso_type=0 nr_frags=0 ip_summed=0 csum=0 csum_complete_sw=0 csum_valid=0 csum_level=0 Note, I use pr_err() just to be consistent with the existing one. Signed-off-by:
-
Andrew Lunn authored
We already have a workaround for a couple of switches whose internal PHYs only have the Marvel OUI, but no model number. We detect such PHYs and give them the 6390 ID as the model number. However the mv88e6161 has two SERDES interfaces in the same address range as its internal PHYs. These suffer from the same problem, the Marvell OUI, but no model number. As a result, these SERDES interfaces were getting the same PHY ID as the mv88e6390, even though they are not PHYs, and the Marvell PHY driver was trying to drive them. Add a special case to stop this from happen. Reported-by:
Chris Healy <Chris.Healy@zii.aero> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-11-13 This series contains updates to the ice driver only. Brett cleans up debug print messages by removing useless or duplicate messages, and make sure we assign the hardware head pointer to head instead of the software head pointer. Resolved an issue when disabling SRIOV we were trying to stop queues multiple times, so make sure we disable SRIOV before stopping transmit and receive queues for VF. Tony fixes a potential NULL pointer dereference during a VF reset. Anirudh resolves an issue where we were releasing the VSI before removing the VSI scheduler node, which was resulting in an error "Failed to set LAN Tx queue context, error: -1". Also fixed the guaranteed number of VSIs available and used by discovering the device capabilities to determine the 'guar_num_vsi' per function, rather than always using the theoretical max number of VSIs every time. Dave avoids a deadlock by nesting RTNL locking, so added a boolean to determine if the RTNL lock is already held. Lev fixes bad mask values which would break compilation. Piotr increases the receive queue disable timeout since it can take additional time to finish all pending queue requests. Usha resolves an issue of VLAN priority tagged traffic not appearing on all traffic classes, which was causing ETS bandwidth shaping to not work as expected. Henry fixes the reset path to cleanup the old scheduler tree before rebuilding it. Md Fahad removes a unnecessary check which was causing a driver load error on platforms with more than 128 cores. ==================== Signed-off-by: -
David S. Miller authored
Salil Mehta says: ==================== net: hns3: Add support of hardware GRO to HNS3 Driver This patch-set adds support of hardware assisted GRO feature to HNS3 driver on Rev B(=0x21) platform. Current hardware only supports TCP/IPv{4|6} flows. Change Log: V1->V2: 1. Remove redundant print reported by Leon Romanovsky. Link: https://lkml.org/lkml/2018/11/13/715 ==================== Signed-off-by: -
Peng Li authored
When HW GRO enable, protocol stack will not do GRO again, driver should add gro param to the skb for the protocol stack.. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Peng Li authored
MAX_SKB_FRAGS in protocol stack is defined as: MAX_SKB_FRAGS is 17 when PAGE_SIZE is 4K. If HW enable GRO, it may merge small packets and the rx buffer may be more than MAX_SKB_FRAGS. So driver will add skb chain when RX buffer num. more than MAX_SKB_FRAGS. Signed-off-by:
-
Peng Li authored
This patch adds support of ethtool -K to enable/disable hardware GRO in HNS3 PF/VF driver. Signed-off-by:
-
Peng Li authored
The "FE bit" in the description means the last description for a packets. When HW GRO enable, HW write data to ring every packet/buffer, there is greater probability that driver handle with the describtion but HW still not set the "FE bit". When drier handle the packet and HW still not set "FE bit", driver stores skb and bd_num in rx ring, and continue to use the skb and bd_num in next napi. Signed-off-by:
-
Peng Li authored
HNS3 hardware Revision B(=0x21) supports Hardware GRO feature. This patch enables this feature in the HNS3 PF/VF driver. Signed-off-by:
-
Heiner Kallweit authored
Move IRQ configuration for IP101A/G from config_init to config_intr callback. Reasons: 1. This allows phylib to disable interrupts if needed. 2. Icplus was the only driver supporting interrupts w/o defining a config_intr callback. Now we can add a phylib plausibility check disabling interrupt mode if one of the two irq-related callbacks isn't defined. I don't own hardware with this PHY, and the change is based on the datasheet for IP101A LF (which is supposed to be register-compatible with IP101A/G). Change is compile-tested only. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 14 Nov, 2018 8 commits
-
-
Alan Brady authored
If a TX hang occurs, we attempt to recover by incrementally resetting. If we're starved for CPU time, it's possible the reset doesn't actually complete (or even fire) before another tx_timeout fires causing us to fly through the different resets without actually doing them. This adds a bit to set and check if a timeout recovery is already pending and, if so, bail out of tx_timeout. The bit will get cleared at the end of i40e_rebuild when reset is complete. Signed-off-by:
Alan Brady <alan.brady@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
The i40e driver complains about unprivileged VFs trying to configure promiscuous mode each time a VF reset occurs. This isn't the fault of the poor VF driver - the PF driver itself is making the request. To fix this, skip the privilege check if the request is to disable all promiscuous activity. This gets rid of the bogus message, but doesn't affect privilege checks, since we really only care if the unprivileged VF is trying to enable promiscuous mode. Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Richard Rodriguez authored
When using port VLAN, for VFs, and setting priority bits, the device was sending out incorrect priority bits, and also setting the CFI bit incorrectly. To fix this, changed shift and mask bit definition for this function, to use the correct ones. Signed-off-by:
Richard Rodriguez <richard.rodriguez@intel.com> Tested-by:
-
Alice Michael authored
When calculating the valid length for a VIRTCHNL_OP_ENABLE_CHANNELS message, we accidentally allowed messages with one extra virtchnl_channel_info structure on the end. This happened due to an off by one error, because we forgot that valid_len already accounted for one virtchnl_channel_info structure, so we need to subtract one from the num_tc value. Signed-off-by:
Alice Michael <alice.michael@intel.com> Tested-by:
-
Alice Michael authored
White space change. Move the check on the virtchnl_vsi_queue_config_info struct to be close to the struct like all the other similar checks. This keeps it clearer and easier to read. Signed-off-by:
-
Jacob Keller authored
In i40e_get_settings_link_up, set ks->base.speed to SPEED_UNKNOWN in the case where we don't know the link speed. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Mitch Williams authored
On link types that do not support autoneg, we cannot attempt to restart nway negotiation. This results in a dead link that requires a power cycle to remedy. Fix this by saving off the autoneg state and checking this value before we try to restart nway. Signed-off-by:
-
Patryk Małek authored
This patch allows disabling FW LLDP agent on X722 devices. It also changes a source of information for this feature from pf->hw_features to pf->hw.flags which are set in i40e_init_adminq. Signed-off-by:
Patryk Małek <patryk.malek@intel.com> Tested-by:
-
