- 18 Oct, 2019 1 commit
-
-
Andy Shevchenko authored
There is no need to keep a pointer to the platform device. Currently there are no users of it directly, and if there will be in the future we may restore it from pointer to the struct device. Convert all users at the same time. Cc: Russell King <linux@armlinux.org.uk> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20191018105429.82782-1-andriy.shevchenko@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 15 Oct, 2019 21 commits
-
-
Alexandru Ardelean authored
For many places in the spi drivers, using the new `spi_transfer_delay` helper is straightforward. It's just replacing: ``` if (t->delay_usecs) udelay(t->delay_usecs); ``` with `spi_transfer_delay(t)` which handles both `delay_usecs` and the new `delay` field. This change replaces in all places (in the spi drivers) where this change is simple. Signed-off-by:Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20190926105147.7839-10-alexandru.ardelean@analog.comSigned-off-by:
-
Alexandru Ardelean authored
The AXI SPI engine driver uses the `delay_usecs` field from `spi_transfer` to configure delays, which the controller will execute. This change extends the logic to also include the `delay` value, in case it is used (instead if `delay_usecs`). Signed-off-by:
-
Alexandru Ardelean authored
The driver errors out if `delay_usecs` is non-zero. This error condition should be extended to the new `delay` field, to account for when it will be used. Signed-off-by:
-
Alexandru Ardelean authored
The WARN_ON macro prints a warning in syslog if `delay_usecs` is non-zero. However, with the new intermediate `delay`, the warning should also be printed. Signed-off-by:
-
Alexandru Ardelean authored
The way the max delay is computed for this controller, it looks like it is searching for the max delay from an SPI message a using that. No idea if this is valid. But this change should support both `delay_usecs` and the new `delay` data which is of `spi_delay` type. Signed-off-by:
-
Alexandru Ardelean authored
This change implements CS control for setup, hold & inactive delays. The `cs_setup` delay is completely new, and can help with cases where asserting the CS, also brings the device out of power-sleep, where there needs to be a longer (than usual), before transferring data. The `cs_hold` time can overlap with the `delay` (or `delay_usecs`) from an SPI transfer. The main difference is that `cs_hold` implies that CS will be de-asserted. The `cs_inactive` delay does not have a clear use-case yet. It has been implemented mostly because the `spi_set_cs_timing()` function implements it. To some degree, this could overlap or replace `cs_change_delay`, but this will require more consideration/investigation in the future. All these delays have been added to the `spi_controller` struct, as they would typically be configured by calling `spi_set_cs_timing()` after an `spi_setup()` call. Software-mode for CS control, implies that the `set_cs_timing()` hook has not been provided for the `spi_controller` object. Signed-off-by:
-
Alexandru Ardelean authored
The initial version of `spi_set_cs_timing()` was implemented with consideration only for clock-cycles as delay. For cases like `CS setup` time, it's sometimes needed that micro-seconds (or nano-seconds) are required, or sometimes even longer delays, for cases where the device needs a little longer to start transferring that after CS is asserted. Signed-off-by:
-
Alexandru Ardelean authored
The `delay` field has type `struct spi_delay`. This allows users to specify nano-second or clock-cycle delays (if needed). Converting to use `delay` is straightforward: it's just assigning the value to `delay.value` and hard-coding the `delay.unit` to `SPI_DELAY_UNIT_USECS`. This keeps the uapi for spidev un-changed. Changing it can be part of another changeset and discussion. Signed-off-by:
-
Alexandru Ardelean authored
This change replaces the use of the `delay_usecs` field with the new `delay` field. The code/test still uses micro-seconds, but they are now configured and used via the `struct spi_delay` format of the `delay` field. Signed-off-by:
-
Alexandru Ardelean authored
This conversion to the spi_transfer_delay_exec() helper is not straightforward, as it seems that when a delay is present, the controller issues a command, and then a delay is followed. This change adds support for the new `delay` field which is of type `spi_delay` and keeps backwards compatibility with the old `delay_usecs` field. Signed-off-by:
-
Alexandru Ardelean authored
The tegra114 driver has a weird/separate `tegra_spi_transfer_delay()` function that does 2 delays: one mdelay() and one udelay(). This was introduced via commit f4fade12 ("spi/tegra114: Correct support for cs_change"). There doesn't seem to be a mention in that commit message to suggest a specific need/use-case for having the 2 delay calls. For the most part, udelay() should be sufficient. This change replaces it with the new `spi_transfer_delay_exec()`, which should do the same thing. Signed-off-by:
-
Alexandru Ardelean authored
The change introduces the `delay` field to the `spi_transfer` struct as an `struct spi_delay` type. This intends to eventually replace `delay_usecs`. But, since there are many users of `delay_usecs`, this needs some intermediate work. A helper called `spi_transfer_delay_exec()` is also added, which maintains backwards compatibility with `delay_usecs`, by assigning the value to `delay` if non-zero. This should maintain backwards compatibility with current users of `udelay_usecs`. Signed-off-by:
-
Alexandru Ardelean authored
This change does a conversion from the `word_delay_usecs` -> `word_delay` for the `spi_device` struct. This allows users to specify inter-word delays in other unit types (nano-seconds or clock cycles), depending on how users want. The Atmel SPI driver is the only current user of the `word_delay_usecs` field (from the `spi_device` struct). So, it needed a slight conversion to use the `word_delay` as an `spi_delay` struct. In SPI core, the only required mechanism is to update the `word_delay` information per `spi_transfer`. This requires a bit more logic than before, because it needs that both delays be converted to a common unit (nano-seconds) for comparison. Signed-off-by:
-
Alexandru Ardelean authored
The `word_delay` field had it's type changed to `struct spi_delay`. This allows users to specify nano-second or clock-cycle delays (if needed). Converting to use `word_delay` is straightforward: it's just assigning the value to `word_delay.value` and hard-coding the `word_delay.unit` to `SPI_DELAY_UNIT_USECS` This keeps the uapi for spidev un-changed. Changing it can be part of another changeset and discussion. Signed-off-by:
-
Alexandru Ardelean authored
The `word_delay` field had it's type changed to `struct spi_delay`. This allows users to specify nano-second or clock-cycle delays (if needed). Converting to use `word_delay` is straightforward: it just uses the new `spi_delay_exec()` routine, that handles the `unit` part. Signed-off-by:
-
Alexandru Ardelean authored
The Spreadtrum SPI driver is the only user of the `word_delay` field in the `spi_transfer` struct. This change converts the field to use the `spi_delay` struct. This also enforces the users to specify the delay unit to be `SPI_DELAY_UNIT_SCK`. Signed-off-by:
-
Alexandru Ardelean authored
Since the logic for `spi_delay` struct + `spi_delay_exec()` has been copied from the `cs_change_delay` logic, it's natural to make this delay, the first user. The `cs_change_delay` logic requires that the default remain 10 uS, in case it is unspecified/unconfigured. So, there is some special handling needed to do that. The ADIS library is one of the few users of the new `cs_change_delay` parameter for an spi_transfer. The introduction of the `spi_delay` struct, requires that the users of of `cs_change_delay` get an update. This change also updates the ADIS library. Signed-off-by:
-
Alexandru Ardelean authored
There are plenty of delays that have been introduced in SPI core. Most of them are in micro-seconds, some need to be in nano-seconds, and some in clock-cycles. For some of these delays (related to transfers & CS timing) it may make sense to have a `spi_delay` struct that abstracts these a bit. The important element of these delays [for unification] seems to be the `unit` of the delay. It looks like micro-seconds is good enough for most people, but every-once in a while, some delays seem to require other units of measurement. This change adds the `spi_delay` struct & a `spi_delay_exec()` function that processes a `spi_delay` object/struct to execute the delay. It's a copy of the `cs_change_delay` mechanism, but without the default for 10 uS. The clock-cycle delay unit is a bit special, as it needs to be bound to an `spi_transfer` object to execute. Signed-off-by:
-
Alexandru Ardelean authored
The `cs_change_delay` backwards compatibility value could be moved outside of the switch statement. The only reason to do it, is to make the next patches easier to diff. Signed-off-by:
-
Fabrizio Castro authored
Document RZ/G2N (R8A774B1) SoC bindings. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1570178133-21532-3-git-send-email-fabrizio.castro@bp.renesas.comSigned-off-by:
-
Simon Horman authored
Convert Renesas HSPI bindings documentation to json-schema. Also name bindings documentation file according to the compat string being documented. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20190926102533.17829-1-horms+renesas@verge.net.auSigned-off-by:
-
- 09 Oct, 2019 2 commits
-
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/spi/spi-npcm-pspi.c: In function npcm_pspi_handler: drivers/spi/spi-npcm-pspi.c:296:6: warning: variable val set but not used [-Wunused-but-set-variable] It is not used since commit 2a22f1b3 ("spi: npcm: add NPCM PSPI controller driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Link: https://lore.kernel.org/r/1570581437-104549-3-git-send-email-zhengbin13@huawei.comSigned-off-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/spi/spi-omap-100k.c: In function spi100k_read_data: drivers/spi/spi-omap-100k.c:140:6: warning: variable dataH set but not used [-Wunused-but-set-variable] It is not used since commit 35c9049b ("Add OMAP spi100k driver") Reported-by:
-
- 08 Oct, 2019 3 commits
-
-
-
Frieder Schrempf authored
Later versions of the QSPI controller (e.g. in i.MX6UL/ULL and i.MX7) seem to have an additional TDH setting in the FLSHCR register, that needs to be set in accordance with the access mode that is used (DDR or SDR). Previous bootstages such as BootROM or bootloader might have used the DDR mode to access the flash. As we currently only use SDR mode, we need to make sure the TDH bits are cleared upon initialization. Fixes: 84d04318 ("spi: Add a driver for the Freescale/NXP QuadSPI controller") Cc: <stable@vger.kernel.org> Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by:
Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20191007071933.26786-1-frieder.schrempf@kontron.deSigned-off-by:
-
Vladimir Oltean authored
With this patch, the "interrupts" property from the device tree bindings is ignored, even if present, if the driver runs in TCFQ mode. Switching to using the DSPI in poll mode has several distinct benefits: - With interrupts, the DSPI driver in TCFQ mode raises an IRQ after each transmitted word. There is more time wasted for the "waitq" event than for actual I/O. And the DSPI IRQ count can easily get the largest in /proc/interrupts on Freescale boards with attached SPI devices. - The SPI I/O time is both lower, and more consistently so. Attached to some Freescale devices are either PTP switches, or SPI RTCs. For reading time off of a SPI slave device, it is important that all SPI transfers take a deterministic time to complete. - In poll mode there is much less time spent by the CPU in hardirq context, which helps with the response latency of the system, and at the same time there is more control over when interrupts must be disabled (to get a precise timestamp measurement): win-win. On the LS1021A-TSN board, where the SPI device is a SJA1105 PTP switch (with a bits_per_word=8 driver), I created a "benchmark" where I read its PTP time once per second, for 120 seconds. Each "read PTP time" is a 12-byte SPI transfer. I then recorded the time before putting the first byte in the TX FIFO, and the time after reading the last byte from the RX FIFO. That is the transfer delay in nanoseconds. Interrupt mode: delay: min 125120 max 168320 mean 150286 std dev 17675.3 Poll mode: delay: min 69440 max 119040 mean 70312.9 std dev 8065.34 Both the mean latency and the standard deviation are more than 50% lower in poll mode than in interrupt mode. This is with an 'ondemand' governor on an otherwise idle system - therefore running mostly at 600 MHz out of a max of 1200 MHz. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-5-olteanv@gmail.comSigned-off-by:
-
- 07 Oct, 2019 3 commits
-
-
Vladimir Oltean authored
In this mode, the DSPI controller uses PIO to transfer word by word. In comparison, in EOQ mode the 4-word deep FIFO is being used, hence the current logic will need some adaptation for which I do not have the hardware (Coldfire) to test. It is not clear what is the timing of DMA transfers and whether timestamping in the driver brings any overall performance increase compared to regular timestamping done in the core. Short phc2sys summary after 58 minutes of running on LS1021A-TSN with interrupts disabled during the critical section: offset: min -26251 max 16416 mean -21.8672 std dev 863.416 delay: min 4720 max 57280 mean 5182.49 std dev 1607.19 lost servo lock 3 times Summary of the same phc2sys service running for 120 minutes with interrupts disabled: offset: min -378 max 381 mean -0.0083089 std dev 101.495 delay: min 4720 max 5920 mean 5129.38 std dev 154.899 lost servo lock 0 times The minimum delay (pre to post time) in nanoseconds is the same, but the maximum delay is quite a bit higher, due to interrupts getting sometimes executed and interfering with the measurement. Hence set disable_irqs whenever possible (aka when the driver runs in poll mode - otherwise it would be a contradiction in terms). Signed-off-by:
-
Vladimir Oltean authored
SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by:
-
Stephen Boyd authored
This driver doesn't do anything with the match for the device node. The logic is the same as looking to see if a device node exists or not because this driver wouldn't probe unless there is a device node match when the device is created from DT. Just test for the presence of the device node to simplify and avoid referencing a potentially undefined match table when CONFIG_OF=n. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mark Brown <broonie@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: <linux-spi@vger.kernel.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191004214334.149976-9-swboyd@chromium.orgSigned-off-by:
-
- 04 Oct, 2019 1 commit
-
-
Patrice Chotard authored
spi_master_put() must only be called in .probe() in case of error. As devm_spi_register_master() is used during probe, spi_master_put() mustn't be called in .remove() callback. It fixes the following kernel WARNING/Oops when executing echo "58003000.spi" > /sys/bus/platform/drivers/stm32-qspi/unbind : ------------[ cut here ]------------ WARNING: CPU: 1 PID: 496 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x9c/0xa4 kernfs: can not remove 'uevent', no directory Modules linked in: CPU: 1 PID: 496 Comm: sh Not tainted 5.3.0-rc1-00219-ga0e07bb51a37 #62 Hardware name: STM32 (Device Tree Support) [<c0111570>] (unwind_backtrace) from [<c010d384>] (show_stack+0x10/0x14) [<c010d384>] (show_stack) from [<c08db558>] (dump_stack+0xb4/0xc8) [<c08db558>] (dump_stack) from [<c01209d8>] (__warn.part.3+0xbc/0xd8) [<c01209d8>] (__warn.part.3) from [<c0120a5c>] (warn_slowpath_fmt+0x68/0x8c) [<c0120a5c>] (warn_slowpath_fmt) from [<c02e5844>] (kernfs_remove_by_name_ns+0x9c/0xa4) [<c02e5844>] (kernfs_remove_by_name_ns) from [<c05833a4>] (device_del+0x128/0x358) [<c05833a4>] (device_del) from [<c05835f8>] (device_unregister+0x24/0x64) [<c05835f8>] (device_unregister) from [<c0638dac>] (spi_unregister_controller+0x88/0xe8) [<c0638dac>] (spi_unregister_controller) from [<c058c580>] (release_nodes+0x1bc/0x200) [<c058c580>] (release_nodes) from [<c0588a44>] (device_release_driver_internal+0xec/0x1ac) [<c0588a44>] (device_release_driver_internal) from [<c0586840>] (unbind_store+0x60/0xd4) [<c0586840>] (unbind_store) from [<c02e64e8>] (kernfs_fop_write+0xe8/0x1c4) [<c02e64e8>] (kernfs_fop_write) from [<c0266b44>] (__vfs_write+0x2c/0x1c0) [<c0266b44>] (__vfs_write) from [<c02694c0>] (vfs_write+0xa4/0x184) [<c02694c0>] (vfs_write) from [<c0269710>] (ksys_write+0x58/0xd0) [<c0269710>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xdd289fa8 to 0xdd289ff0) 9fa0: 0000006c 000e20e8 00000001 000e20e8 0000000d 00000000 9fc0: 0000006c 000e20e8 b6f87da0 00000004 0000000d 0000000d 00000000 00000000 9fe0: 00000004 bee639b0 b6f2286b b6eaf6c6 ---[ end trace 1b15df8a02d76aef ]--- ------------[ cut here ]------------ WARNING: CPU: 1 PID: 496 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x9c/0xa4 kernfs: can not remove 'online', no directory Modules linked in: CPU: 1 PID: 496 Comm: sh Tainted: G W 5.3.0-rc1-00219-ga0e07bb51a37 #62 Hardware name: STM32 (Device Tree Support) [<c0111570>] (unwind_backtrace) from [<c010d384>] (show_stack+0x10/0x14) [<c010d384>] (show_stack) from [<c08db558>] (dump_stack+0xb4/0xc8) [<c08db558>] (dump_stack) from [<c01209d8>] (__warn.part.3+0xbc/0xd8) [<c01209d8>] (__warn.part.3) from [<c0120a5c>] (warn_slowpath_fmt+0x68/0x8c) [<c0120a5c>] (warn_slowpath_fmt) from [<c02e5844>] (kernfs_remove_by_name_ns+0x9c/0xa4) [<c02e5844>] (kernfs_remove_by_name_ns) from [<c0582488>] (device_remove_attrs+0x20/0x5c) [<c0582488>] (device_remove_attrs) from [<c05833b0>] (device_del+0x134/0x358) [<c05833b0>] (device_del) from [<c05835f8>] (device_unregister+0x24/0x64) [<c05835f8>] (device_unregister) from [<c0638dac>] (spi_unregister_controller+0x88/0xe8) [<c0638dac>] (spi_unregister_controller) from [<c058c580>] (release_nodes+0x1bc/0x200) [<c058c580>] (release_nodes) from [<c0588a44>] (device_release_driver_internal+0xec/0x1ac) [<c0588a44>] (device_release_driver_internal) from [<c0586840>] (unbind_store+0x60/0xd4) [<c0586840>] (unbind_store) from [<c02e64e8>] (kernfs_fop_write+0xe8/0x1c4) [<c02e64e8>] (kernfs_fop_write) from [<c0266b44>] (__vfs_write+0x2c/0x1c0) [<c0266b44>] (__vfs_write) from [<c02694c0>] (vfs_write+0xa4/0x184) [<c02694c0>] (vfs_write) from [<c0269710>] (ksys_write+0x58/0xd0) [<c0269710>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xdd289fa8 to 0xdd289ff0) 9fa0: 0000006c 000e20e8 00000001 000e20e8 0000000d 00000000 9fc0: 0000006c 000e20e8 b6f87da0 00000004 0000000d 0000000d 00000000 00000000 9fe0: 00000004 bee639b0 b6f2286b b6eaf6c6 ---[ end trace 1b15df8a02d76af0 ]--- 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = e612f14d [00000050] *pgd=ff1f5835 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 1 PID: 496 Comm: sh Tainted: G W 5.3.0-rc1-00219-ga0e07bb51a37 #62 Hardware name: STM32 (Device Tree Support) PC is at kernfs_find_ns+0x8/0xfc LR is at kernfs_find_and_get_ns+0x30/0x48 pc : [<c02e49a4>] lr : [<c02e4ac8>] psr: 40010013 sp : dd289dac ip : 00000000 fp : 00000000 r10: 00000000 r9 : def6ec58 r8 : dd289e54 r7 : 00000000 r6 : c0abb234 r5 : 00000000 r4 : c0d26a30 r3 : ddab5080 r2 : 00000000 r1 : c0abb234 r0 : 00000000 Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: dd11c06a DAC: 00000051 Process sh (pid: 496, stack limit = 0xe13a592d) Stack: (0xdd289dac to 0xdd28a000) 9da0: c0d26a30 00000000 c0abb234 00000000 c02e4ac8 9dc0: 00000000 c0976b44 def6ec00 dea53810 dd289e54 c02e864c c0a61a48 c0a4a5ec 9de0: c0d630a8 def6ec00 c0d04c48 c02e86e0 def6ec00 de909338 c0d04c48 c05833b0 9e00: 00000000 c0638144 dd289e54 def59900 00000000 475b3ee5 def6ec00 00000000 9e20: def6ec00 def59b80 dd289e54 def59900 00000000 c05835f8 def6ec00 c0638dac 9e40: 0000000a dea53810 c0d04c48 c058c580 dea53810 def59500 def59b80 475b3ee5 9e60: ddc63e00 dea53810 dea3fe10 c0d63a0c dea53810 ddc63e00 dd289f78 dd240d10 9e80: 00000000 c0588a44 c0d59a20 0000000d c0d63a0c c0586840 0000000d dd240d00 9ea0: 00000000 00000000 ddc63e00 c02e64e8 00000000 00000000 c0d04c48 dd9bbcc0 9ec0: c02e6400 dd289f78 00000000 000e20e8 0000000d c0266b44 00000055 00000cc0 9ee0: 000000e3 000e3000 dd11c000 dd11c000 00000000 00000000 00000000 00000000 9f00: ffeee38c dff99688 00000000 475b3ee5 00000001 dd289fb0 ddab5080 ddaa5800 9f20: 00000817 000e30ec dd9e7720 475b3ee5 ddaa583c 0000000d dd9bbcc0 000e20e8 9f40: dd289f78 00000000 000e20e8 0000000d 00000000 c02694c0 00000000 00000000 9f60: c0d04c48 dd9bbcc0 00000000 00000000 dd9bbcc0 c0269710 00000000 00000000 9f80: 000a91f4 475b3ee5 0000006c 000e20e8 b6f87da0 00000004 c0101204 dd288000 9fa0: 00000004 c0101000 0000006c 000e20e8 00000001 000e20e8 0000000d 00000000 9fc0: 0000006c 000e20e8 b6f87da0 00000004 0000000d 0000000d 00000000 00000000 9fe0: 00000004 bee639b0 b6f2286b b6eaf6c6 600e0030 00000001 00000000 00000000 [<c02e49a4>] (kernfs_find_ns) from [<def6ec00>] (0xdef6ec00) Code: ebf8eeab c0dc50b8 e92d40f0 e292c000 (e1d035b0) ---[ end trace 1b15df8a02d76af1 ]--- Fixes: a88eceb1 ("spi: stm32-qspi: add spi_master_put in release function") Cc: <stable@vger.kernel.org> Signed-off-by:
Patrice Chotard <patrice.chotard@st.com> Link: https://lore.kernel.org/r/20191004123606.17241-1-patrice.chotard@st.comSigned-off-by:
-
- 02 Oct, 2019 1 commit
-
-
Vladimir Oltean authored
With this patch, the "interrupts" property from the device tree bindings is ignored, even if present, if the driver runs in TCFQ mode. Switching to using the DSPI in poll mode has several distinct benefits: - With interrupts, the DSPI driver in TCFQ mode raises an IRQ after each transmitted word. There is more time wasted for the "waitq" event than for actual I/O. And the DSPI IRQ count can easily get the largest in /proc/interrupts on Freescale boards with attached SPI devices. - The SPI I/O time is both lower, and more consistently so. Attached to some Freescale devices are either PTP switches, or SPI RTCs. For reading time off of a SPI slave device, it is important that all SPI transfers take a deterministic time to complete. - In poll mode there is much less time spent by the CPU in hardirq context, which helps with the response latency of the system, and at the same time there is more control over when interrupts must be disabled (to get a precise timestamp measurement, which will come in a future patch): win-win. On the LS1021A-TSN board, where the SPI device is a SJA1105 PTP switch (with a bits_per_word=8 driver), I created a "benchmark" where I periodically transferred a 12-byte message once per second, for 120 seconds. I then recorded the time before putting the first byte in the TX FIFO, and the time after reading the last byte from the RX FIFO. That is the transfer delay in nanoseconds. Interrupt mode: delay: min 125120 max 168320 mean 150286 std dev 17675.3 Poll mode: delay: min 69440 max 119040 mean 70312.9 std dev 8065.34 Both the mean latency and the standard deviation are more than 50% lower in poll mode than in interrupt mode, and the 'max' in poll mode is lower than the 'min' in interrupt mode. This is with an 'ondemand' governor on an otherwise idle system - therefore running mostly at 600 MHz out of a max of 1200 MHz. Signed-off-by:
-
- 01 Oct, 2019 8 commits
-
-
Felipe Balbi authored
Some devices support MSI interrupts. Let's at least try to use them in platforms that provide MSI capability. Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Link: https://lore.kernel.org/r/20191001081405.764161-1-felipe.balbi@linux.intel.comSigned-off-by:
-
Kuldeep Singh authored
Different platforms have different Master with different SourceID on AHB bus. The 0X0E Master ID is used by cluster 3 in case of LS2088A. So, patch introduce an invalid master id variable to fix invalid mastered on different platforms. Signed-off-by:
Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by:
Kuldeep Singh <kuldeep.singh@nxp.com> Link: https://lore.kernel.org/r/1569920356-8953-1-git-send-email-kuldeep.singh@nxp.comSigned-off-by:
-
Navid Emamdoost authored
In fsl_lpspi_probe an SPI controller is allocated either via spi_alloc_slave or spi_alloc_master. In all but one error cases this controller is put by going to error handling code. This commit fixes the case when pm_runtime_get_sync fails and it should go to the error handling path. Fixes: 944c01a8 ("spi: lpspi: enable runtime pm for lpspi") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20190930034602.1467-1-navid.emamdoost@gmail.comSigned-off-by:
-
Navid Emamdoost authored
In spi_gpio_probe an SPI master is allocated via spi_alloc_master, but this controller should be released if devm_add_action_or_reset fails, otherwise memory leaks. In order to avoid leak spi_contriller_put must be called in case of failure for devm_add_action_or_reset. Fixes: 8b797490 ("spi: gpio: Make sure spi_master_put() is called in every error path") Signed-off-by:
-
Colin Ian King authored
The complete call is indented incorrectly, remove the extraneous tabs. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190926113701.26986-1-colin.king@canonical.comSigned-off-by:
-
Lukasz Majewski authored
This change provides the dspi_slave_abort() function, which is a callback for slave_abort() method of SPI controller generic driver. As in the SPI slave mode the transmission is driven by master, any distortion may cause the slave to enter undefined internal state. To avoid this problem the dspi_slave_abort() terminates all pending and ongoing DMA transactions (with sync) and clears internal FIFOs. Signed-off-by:
Lukasz Majewski <lukma@denx.de> Link: https://lore.kernel.org/r/20190924110547.14770-3-lukma@denx.deSigned-off-by:
-
Markus Elfring authored
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Link: https://lore.kernel.org/r/178bb78e-714f-645f-d819-5732870c4272@web.deSigned-off-by:
-
Markus Elfring authored
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
-
