- 22 Jan, 2010 1 commit
-
-
Uwe Kleine-König authored
on AT91 the timer irq is shared, so the handler might be entered without irqs being disabled. Though this should not happen as the timer irq is registered early, there have been some reports on the mailing list. To make debugging that problem easier next time it pops up a WARN_ON_ONCE is added to the handler if irqs are not off. Signed-off-by:Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
- 12 Jan, 2010 1 commit
-
-
Ananth N Mavinakayanahalli authored
Revert commit 2fbd07a5, as this commit breaks an IBM platform with quad-core Xeon cpu's. According to Suresh, this might be an IBM platform issue, as on other Intel platforms with <= 8 logical cpu's, logical flat mode works fine irespective of physical apic id values (inline with the xapic architecture). Revert this for now because of the IBM platform breakage. Another version will be re-submitted after the complete analysis. Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 11 Jan, 2010 38 commits
-
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: Ensure we force all busy extents in range to disk xfs: Don't flush stale inodes xfs: fix timestamp handling in xfs_setattr xfs: use DECLARE_EVENT_CLASS
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Use MAX_LFS_FILESIZE for meta inode size GFS2: Fix gfs2_xattr_acl_chmod() GFS2: Fix locking bug in rename GFS2: Ensure uptodate inode size when using O_APPEND
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Fix dquot_transfer for filesystems different from ext4
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6Linus Torvalds authored
* 'agp-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp/hp: fail gracefully if we don't find an IOC agp/hp: fixup hp agp after ACPI changes agp: correct missing cleanup on error in agp_add_bridge
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (45 commits) drm/nv04: Fix set_operation software method. drm/nouveau: initialise DMA tracking parameters earlier drm/nouveau: use dma.max rather than pushbuf size for checking GET validity drm/nv04: differentiate between nv04/nv05 drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence drm/nv50: prevent a possible ctxprog hang drm/nouveau: have ttm's fault handler called directly drm/nv50: restore correct cache1 get/put address on fifoctx load drm/nouveau: create function for "dealing" with gpu lockup drm/nouveau: remove unused nouveau_channel_idle() function drm/nouveau: fix handling of fbcon colours in 8bpp drm/nv04: Context switching fixes. drm/nouveau: Use the software object for fencing. drm/nouveau: Allocate a per-channel instance of NV_SW. drm/nv50: make the blocksize depend on vram size drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN drm/nouveau: Don't skip card take down on nv0x. drm/nouveau: Implement nv42-nv43 TV load detection. drm/nouveau: Clean up the nv17-nv4x load detection code a bit. drm/nv50: fix fillrect color ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Make PCI device ids constant hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUs hwmon: (k10temp) Blacklist more family 10h processors hwmon: (asus_atk0110) Add debugfs interface hwmon: (asus_atk0110) Refactor interface probe code hwmon: (adt7462) Fix pin 28 monitoring
-
Avi Kivity authored
The list macros use LIST_POISON1 and LIST_POISON2 as undereferencable pointers in order to trap erronous use of freed list_heads. Unfortunately userspace can arrange for those pointers to actually be dereferencable, potentially turning an oops to an expolit. To avoid this allow architectures (currently x86_64 only) to override the default values for these pointers with truly-undereferencable values. This is easy on x86_64 as the virtual address space is large and contains areas that cannot be mapped. Other 64-bit architectures will likely find similar unmapped ranges. [ingo: switch to 0xdead000000000000 as the unmapped area] [ingo: add comments, cleanup] [jaswinder: eliminate sparse warnings] Acked-by:
Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
-
Linus Torvalds authored
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (26 commits) OMAP2 clock: dynamically allocate CPUFreq frequency table OMAP clock/CPUFreq: add clk_exit_cpufreq_table() OMAP2xxx OPP: clean up comments in OPP data OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabled OMAP1 clock: remove __initdata from struct clk_functions to prevent crash OMAP1 clock: Add missing clocks for OMAP 7xx OMAP clock: remove incorrect EXPORT_SYMBOL()s OMAP3 clock: Add capability to change rate of dpll4_m5_ck OMAP3 clock: McBSP 2, 3, 4 functional clock parent is PER_96M_FCLK, not CORE_96M_FCLK OMAP3: clock: add clockdomains for UART1 & 2 OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc space OMAP2xxx IO mapping: mark DSP mappings as being 2420-only ARM: OMAP3: PM: Fix the Invalid CM_CLKSTCTRL reg access. OMAP2: remove duplicated #include omap3: EVM: Choose OMAP_PACKAGE_CBB omap3: Fix booting if package is uninitialized omap3: add missing parentheses omap3: add missing parentheses omap2/3: ZOOM: Correcting key mapping for few keys omap2/3: make serial_in_override() address the right uart port ...
-
David Howells authored
Update the defconfig for the ASB2303 platform. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
David Howells authored
Access to the ASB2305's PCnet32 NIC doesn't work correctly because when the NIC attempts to update the ring buffer flags by DMA, the change to RAM crops up about 17uS after the interrupt line is asserted. This is almost certainly due to a bug in the PCI bridge FPGA on that board. We can get around this by making dma_alloc_coherent() put the ring buffer in the SRAM attached to the PCI bridge rather than in the SDRAM. Signed-off-by:
-
David Howells authored
Insert PCI root bus resources for the MN10300-based ASB2305 development kit motherboard. This is required because the CPU's window onto the PCI bus address space is considerably smaller than the CPU's full address space and non-PCI devices lie outside of the PCI window that we might want to access. Without this patch, the PCI root bus uses the platform-level bus resources, and these are then confined to the PCI window, thus making platform_device_add() reject devices outside of this window. We also add a reservation for the PCI SRAM region. Signed-off-by:
-
Bjorn Helgaas authored
Use the generic pci_enable_resources() instead of the arch-specific code. Unlike this arch-specific code, the generic version: - checks PCI_NUM_RESOURCES (11), not 6, resources - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set - skips ROM resources unless IORESOURCE_ROM_ENABLE is set - checks for resource collisions with "!r->parent" Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
David Howells authored
Use KERN_ERR not KERN_ERROR in the ASB2305 platform code. Signed-off-by:
-
Al Viro authored
asm/cpu never existed for mn10300; the files they are looking for are in asm. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
David Howells authored
Wire up missing new system calls for MN10300. Signed-off-by:
David Howells <dhowelsl@redhat.com> Signed-off-by:
-
Mark Salter authored
gcc 4.2.1 for MN10300 is more agressive than the older gcc in reordering/moving other insns between an insn that sets flags and an insn that uses those flags. This leads to trouble with asm statements which are missing an explicit "cc" clobber. This patch adds the explicit "cc" clobber to asm statements which do indeed clobber the condition flags. Signed-off-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
-
Mark Salter authored
The gcc-4.2.1 based toolchain for MN10300 adds some new note sections which need to be stripped from the binary image. This patch takes care of that. Signed-off-by:
-
Mark Salter authored
This fixes a signal stack handling problem in the MN10300 arch. When new threads are cloned with CLONE_VM, they don't inherit the alternate signal stack. They do share the signal flags, though. When deciding whether to use an alternate stack, the arch code needs to check to make sure the task struct contains a valid alternate stack. This patch fixes the MN10300 arch by using the sas_ss_flags() test provided by sched.h rather than the on_sig_stack() test which is insufficient by itself. Signed-off-by:
-
OGAWA Hirofumi authored
commit abd6633c ("pnp: add a shutdown method to pnp drivers") adds shutdown method to bus driver blindly. With it, driver->shutdown is no longer valid. Use pnp_driver->shutdown instead. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14889Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by:
Malte Schröder <maltesch@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: David Hardeman <david@hardeman.nu> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: <stable@kernel.org> [2.6.32.x] Signed-off-by:
-
Minchan Kim authored
A long time ago we regarded zero page as file_rss and vm_normal_page doesn't return NULL. But now, we reinstated ZERO_PAGE and vm_normal_page's implementation can return NULL in case of zero page. Also we don't count it with file_rss any more. Then, RSS and PSS can't be matched. For consistency, Let's ignore zero page in smaps_pte_range. Signed-off-by:
Minchan Kim <minchan.kim@gmail.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by:
Matt Mackall <mpm@selenic.com> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Randy Dunlap authored
Remove comments about function short descriptions not allowed to be on multiple lines (that was fixed/changed recently). Add comments that function "section header:" names need to be unique per function/struct/union/typedef/enum. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Stephen Hemminger authored
menu: use proper 64 bit math The new menu governor is incorrectly doing a 64 bit divide. Compile tested only Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: <stable@kernel.org> Signed-off-by:
-
Randy Dunlap authored
Fix typos, grammos, spellos, hyphenation. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Andrea Arcangeli authored
sz is in bytes, MAX_ORDER_NR_PAGES is in pages. Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
David Gibson <dwg@au1.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: David Rientjes <rientjes@google.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by:
-
Tomaz Mertelj authored
Signed-off-by: <tomaz.mertelj@guest.arnes.si> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jani Nikula authored
Previously enabled poll(2) support on one edge was never reconfigured when sysfs polarity change was triggered from kernel, because 'struct device *dev' shadowed an earlier definition. Found by sparse, which I should've run much earlier. Signed-off-by:
Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
Josip Rodin <joy@entuzijast.net> Cc: Joe Perches <joe@perches.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Adrian Hunter authored
JEDEC eMMC specification version 4.4 (MMCA 4.4) defines Extended CSD structure versions up to 5. Signed-off-by:
Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Adrian Hunter authored
The main bug was that 'blk_cleanup_queue()' was called while the block device could still be in use, for example, because the card was removed while files were still open. In addition, to be sure that 'mmc_request()' will get called for all new requests (so it can error them out), the queue is emptied during cleanup. This is done after the worker thread is stopped to avoid racing with it. Finally, it is not a device error for this to be happening, so quiet the (sometimes very many) error messages. Signed-off-by:
-
Jarkko Lavinen authored
If mmc_blk_set_blksize() fails mmc_blk_probe() the request queue and its thread have been set up and they need to be shut down properly before putting the disk. Signed-off-by:
Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by:
-
Anna Lemehova authored
When a card is removed before mmc_blk_probe() has called add_disk(), then the minor field is uninitialized and has value 0. This caused mmc_blk_put() to always release devidx 0 even if 0 was still in use. Then the next mmc_blk_probe() used the first free idx of 0, which oopses in sysfs, since it is used by another card. Signed-off-by:
Anna Lemehova <EXT-Anna.Lemehova@nokia.com> Signed-off-by:
-
Randy Dunlap authored
Warning(drivers/base/power/main.c:453): No description found for parameter 'dev' Warning(drivers/base/power/main.c:453): No description found for parameter 'cb' Warning(drivers/base/power/main.c:719): No description found for parameter 'dev' Warning(drivers/base/power/main.c:719): No description found for parameter 'state' Warning(drivers/base/power/main.c:719): No description found for parameter 'cb' Signed-off-by:
-
KOSAKI Motohiro authored
Commit d899bf7b (procfs: provide stack information for threads) introduced to show stack information in /proc/{pid}/status. But it cause large performance regression. Unfortunately /proc/{pid}/status is used ps command too and ps is one of most important component. Because both to take mmap_sem and page table walk are heavily operation. If many process run, the ps performance is, [before d899bf7b] % perf stat ps >/dev/null Performance counter stats for 'ps': 4090.435806 task-clock-msecs # 0.032 CPUs 229 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 234 page-faults # 0.000 M/sec 8587565207 cycles # 2099.425 M/sec 9866662403 instructions # 1.149 IPC 3789415411 cache-references # 926.409 M/sec 30419509 cache-misses # 7.437 M/sec 128.859521955 seconds time elapsed [after d899bf7b] % perf stat ps > /dev/null Performance counter stats for 'ps': 4305.081146 task-clock-msecs # 0.028 CPUs 480 context-switches # 0.000 M/sec 2 CPU-migrations # 0.000 M/sec 237 page-faults # 0.000 M/sec 9021211334 cycles # 2095.480 M/sec 10605887536 instructions # 1.176 IPC 3612650999 cache-references # 839.160 M/sec 23917502 cache-misses # 5.556 M/sec 152.277819582 seconds time elapsed Thus, this patch revert it. Fortunately /proc/{pid}/task/{tid}/smaps provide almost same information. we can use it. Commit d899bf7b introduced two features: 1) Add the annotattion of [thread stack: xxxx] mark to /proc/{pid}/task/{tid}/maps. 2) Add StackUsage field to /proc/{pid}/status. I only revert (2), because I haven't seen (1) cause regression. Signed-off-by:
-
Florian Fainelli authored
MIPS compressed kernels output a vmlinuz file in the top-level directory (maybe others do). Add vmlinuz to the list of files to ignore by git. Signed-off-by:
Florian Fainelli <ffainelli@freebox.fr> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maxime Bizon <mbizon@freebox.fr> Signed-off-by:
-
Andi Kleen authored
When print-fatal-signals is enabled it's possible to dump any memory reachable by the kernel to the log by simply jumping to that address from user space. Or crash the system if there's some hardware with read side effects. The fatal signals handler will dump 16 bytes at the execution address, which is fully controlled by ring 3. In addition when something jumps to a unmapped address there will be up to 16 additional useless page faults, which might be potentially slow (and at least is not very efficient) Fortunately this option is off by default and only there on i386. But fix it by checking for kernel addresses and also stopping when there's a page fault. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Dave Anderson authored
The LTP cgroup test suite generates a "kernel BUG at kernel/cgroup.c:790!" here in cgroup_diput(): /* * if we're getting rid of the cgroup, refcount should ensure * that there are no pidlists left. */ BUG_ON(!list_empty(&cgrp->pidlists)); The cgroup pidlist rework in 2.6.32 generates the BUG_ON, which is caused when pidlist_array_load() calls cgroup_pidlist_find(): (1) if a matching cgroup_pidlist is found, it down_write's the mutex of the pre-existing cgroup_pidlist, and increments its use_count. (2) if no matching cgroup_pidlist is found, then a new one is allocated, it down_write's its mutex, and the use_count is set to 0. (3) the matching, or new, cgroup_pidlist gets returned back to pidlist_array_load(), which increments its use_count -- regardless whether new or pre-existing -- and up_write's the mutex. So if a matching list is ever encountered by cgroup_pidlist_find() during the life of a cgroup directory, it results in an inflated use_count value, preventing it from ever getting released by cgroup_release_pid_array(). Then if the directory is subsequently removed, cgroup_diput() hits the BUG_ON() when it finds that the directory's cgroup is still populated with a pidlist. The patch simply removes the use_count increment when a matching pidlist is found by cgroup_pidlist_find(), because it gets bumped by the calling pidlist_array_load() function while still protected by the list's mutex. Signed-off-by:Dave Anderson <anderson@redhat.com> Reviewed-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Ben Blum <bblum@andrew.cmu.edu> Cc: Paul Menage <menage@google.com> Cc: <stable@kernel.org> Signed-off-by:
-
Joe Perches authored
The following command doesn't generate any output. `./scripts/get_maintainer.pl --no-git -f drivers/net/wireless/wl12xx/wl1271_acx.c` An excluded "X:" pattern match in any section would cause a file not to match any other section. Signed-off-by:
Joe Perches <joe@perches.com> Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
