Loose mode in 9p utilizes the page cache without respecting coherency with
the server.  Any writes previously invaldiated the entire mapping for a file.
This patch softens the behavior to only invalidate the region of the actual
write.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

The 9P2000 protocol requires the authentication and permission checks to be
done in the file server. For that reason every user that accesses the file
server tree has to authenticate and attach to the server separately.
Multiple users can share the same connection to the server.

Currently v9fs does a single attach and executes all I/O operations as a
single user. This makes using v9fs in multiuser environment unsafe as it
depends on the client doing the permission checking.

This patch improves the 9P2000 support by allowing every user to attach
separately. The patch defines three modes of access (new mount option
'access'):

- attach-per-user (access=user) (default mode for 9P2000.u)
 If a user tries to access a file served by v9fs for the first time, v9fs
 sends an attach command to the server (Tattach) specifying the user. If
 the attach succeeds, the user can access the v9fs tree.
 As there is no uname->uid (string->integer) mapping yet, this mode works
 only with the 9P2000.u dialect.

- allow only one user to access the tree (access=<uid>)
 Only the user with uid can access the v9fs tree. Other users that attempt
 to access it will get EPERM error.

- do all operations as a single user (access=any) (default for 9P2000)
 V9fs does a single attach and all operations are done as a single user.
 If this mode is selected, the v9fs behavior is identical with the current
 one.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Change the names of 'uid' and 'gid' parameters to the more appropriate
'dfltuid' and 'dfltgid'.  This also sets the default uid/gid to -2
(aka nfsnobody)
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Create more general flags field in the v9fs_session_info struct and move the
'extended' flag as a bit in the flags.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

This patch abstracts out the interfaces to underlying transports so that
new transports can be added as modules.  This should also allow kernel
configuration of transports without ifdef-hell.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

As IP22 is now using do_IRQ for timer interrupt, don't mess with
interrupt handler any longer
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Fix some typo introduced on clockevent conversion.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Some processors offer the option of using the interrupt on which
normally the count / compare interrupt would be signaled as a normal
interupt pin.  Previously this required some ugly hackery for each
system which is much easier done by a quick and simple probe.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Userland, including the C library and the dynamic linker, is keen to use
the SYNC instruction, even for "generic" MIPS I binaries these days.
Which makes it less than useful on MIPS I processors.

This change adds the emulation, but as our do_ri() infrastructure was not
really prepared to take yet another instruction, I have rewritten it and
its callees slightly as follows.

Now there is only a single place a possible signal is thrown from.  The
place is at the end of do_ri().  The instruction word is fetched in
do_ri() and passed down to handlers.  The handlers are called in sequence
and return a result that lets the caller decide upon further processing.
If the result is positive, then the handler has picked the instruction,
but a signal should be thrown and the result is the signal number.  If the
result is zero, then the handler has successfully simulated the
instruction.  If the result is negative, then the handler did not handle
the instruction; to make it more obvious the calls do not follow the usual
0/-Exxx result convention they now return -1 instead of -EFAULT.

The calculation of the return EPC is now at the beginning.  The reason is
it is easier to handle it there as emulation callees may modify a register
and an instruction may be located in delay slot of a branch whose result
depends on the register.  It has to be undone if a signal is to be raised,
but it is not a problem as this is the slow-path case, and both actions
are done in single places now rather than the former being scattered
through emulation handlers.

The part of do_cpu() being covered follows the changes to do_ri().
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---

  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x478): Section mismatch: reference to .init.text:start_kernel (between '_stext' and 'run_init_process')
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: fix new task startup crash
  sched: fix !SYSFS build breakage
  sched: fix improper load balance across sched domain
  sched: more robust sd-sysctl entry freeing

* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
  [SCSI] Remove full sg table memset()
  [SCSI] ide-scsi: remove usage of sg_last()
  Fix loop terminating conditions in fill_sg().
  [BLOCK] Clear sg entry before filling in blk_rq_map_sg()
  IA64: iommu uses sg_next with an invalid sg element
  cciss: disable DMA refetch on Smart Array P600
  swiotlb: fix map_sg failure handling
  SPARC64: fix iommu sg chaining
  [SCSI] ide-scsi: use scsi_sg_count() instead of ->use_sg

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (24 commits)
  [POWERPC] Fix vmemmap warning in init_64.c
  [POWERPC] Fix 64 bits vDSO DWARF info for CR register
  [POWERPC] Add 1TB workaround for PA6T
  [POWERPC] Enable NO_HZ and high res timers for pseries and ppc64 configs
  [POWERPC] Quieten cache information at boot
  [POWERPC] Quieten clockevent printk
  [POWERPC] Enable SLUB in *_defconfig
  [POWERPC] Fix 1TB segment detection
  [POWERPC] Fix iSeries_hpte_insert prototype
  [POWERPC] Fix copyright symbol
  [POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and eHEA drivers
  [POWERPC] ibmebus: Add device creation and bus probing based on of_device
  [POWERPC] ibmebus: Remove bus match/probe/remove functions
  [POWERPC] Move of_device allocation into of_device.[ch]
  [POWERPC] mpc52xx: device tree changes for FEC and MDIO
  [POWERPC] bestcomm: GenBD task support
  [POWERPC] bestcomm: FEC task support
  [POWERPC] bestcomm: ATA task support
  [POWERPC] bestcomm: core bestcomm support for Freescale MPC5200
  [POWERPC] mpc52xx: Update mpc52xx_psc structure with B revision changes
  ...

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (59 commits)
  [XFS] eagerly remove vmap mappings to avoid upsetting Xen
  [XFS] simplify validata_fields
  [XFS] no longer using io_vnode, as was remaining from 23 cherrypick
  [XFS] Remove STATIC which was missing from prior manual merge
  [XFS] Put back the QUEUE_ORDERED_NONE test in the barrier check.
  [XFS] Turn off XBF_ASYNC flag before re-reading superblock.
  [XFS] avoid race in sync_inodes() that can fail to write out all dirty data
  [XFS] This fix prevents bulkstat from spinning in an infinite loop.
  [XFS] simplify xfs_create/mknod/symlink prototype
  [XFS] avoid xfs_getattr in XFS_IOC_FSGETXATTR ioctl
  [XFS] get_bulkall() could return incorrect inode state
  [XFS] Kill unused IOMAP_EOF flag
  [XFS] fix when DMAPI mount option processing happens
  [XFS] ensure file size is logged on synchronous writes
  [XFS] growlock should be a mutex
  [XFS] replace some large xfs_log_priv.h macros by proper functions
  [XFS] kill struct bhv_vfs
  [XFS] move syncing related members from struct bhv_vfs to struct xfs_mount
  [XFS] kill the vfs_flags member in struct bhv_vfs
  [XFS] kill the vfs_fsid and vfs_altfsid members in struct bhv_vfs
  ...

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup:
  Remove magic macros for screen_info structure members
  [x86] remove uses of magic macros for boot_params access

This patch contains the following cleanups that are now possible:
- remove the unused security_operations->inode_xattr_getsuffix
- remove the no longer used security_operations->unregister_security
- remove some no longer required exit code
- remove a bunch of no longer used exports
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Implement file posix capabilities.  This allows programs to be given a
subset of root's powers regardless of who runs them, without having to use
setuid and giving the binary all of root's powers.

This version works with Kaigai Kohei's userspace tools, found at
http://www.kaigai.gr.jp/index.php.  For more information on how to use this
patch, Chris Friedhoff has posted a nice page at
http://www.friedhoff.org/fscaps.html.

Changelog:
	Nov 27:
	Incorporate fixes from Andrew Morton
	(security-introduce-file-caps-tweaks and
	security-introduce-file-caps-warning-fix)
	Fix Kconfig dependency.
	Fix change signaling behavior when file caps are not compiled in.

	Nov 13:
	Integrate comments from Alexey: Remove CONFIG_ ifdef from
	capability.h, and use %zd for printing a size_t.

	Nov 13:
	Fix endianness warnings by sparse as suggested by Alexey
	Dobriyan.

	Nov 09:
	Address warnings of unused variables at cap_bprm_set_security
	when file capabilities are disabled, and simultaneously clean
	up the code a little, by pulling the new code into a helper
	function.

	Nov 08:
	For pointers to required userspace tools and how to use
	them, see http://www.friedhoff.org/fscaps.html.

	Nov 07:
	Fix the calculation of the highest bit checked in
	check_cap_sanity().

	Nov 07:
	Allow file caps to be enabled without CONFIG_SECURITY, since
	capabilities are the default.
	Hook cap_task_setscheduler when !CONFIG_SECURITY.
	Move capable(TASK_KILL) to end of cap_task_kill to reduce
	audit messages.

	Nov 05:
	Add secondary calls in selinux/hooks.c to task_setioprio and
	task_setscheduler so that selinux and capabilities with file
	cap support can be stacked.

	Sep 05:
	As Seth Arnold points out, uid checks are out of place
	for capability code.

	Sep 01:
	Define task_setscheduler, task_setioprio, cap_task_kill, and
	task_setnice to make sure a user cannot affect a process in which
	they called a program with some fscaps.

	One remaining question is the note under task_setscheduler: are we
	ok with CAP_SYS_NICE being sufficient to confine a process to a
	cpuset?

	It is a semantic change, as without fsccaps, attach_task doesn't
	allow CAP_SYS_NICE to override the uid equivalence check.  But since
	it uses security_task_setscheduler, which elsewhere is used where
	CAP_SYS_NICE can be used to override the uid equivalence check,
	fixing it might be tough.

	     task_setscheduler
		 note: this also controls cpuset:attach_task.  Are we ok with
		     CAP_SYS_NICE being used to confine to a cpuset?
	     task_setioprio
	     task_setnice
		 sys_setpriority uses this (through set_one_prio) for another
		 process.  Need same checks as setrlimit

	Aug 21:
	Updated secureexec implementation to reflect the fact that
	euid and uid might be the same and nonzero, but the process
	might still have elevated caps.

	Aug 15:
	Handle endianness of xattrs.
	Enforce capability version match between kernel and disk.
	Enforce that no bits beyond the known max capability are
	set, else return -EPERM.
	With this extra processing, it may be worth reconsidering
	doing all the work at bprm_set_security rather than
	d_instantiate.

	Aug 10:
	Always call getxattr at bprm_set_security, rather than
	caching it at d_instantiate.

[morgan@kernel.org: file-caps clean up for linux/capability.h]
[bunk@kernel.org: unexport cap_inode_killpriv]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Andrew Morgan <morgan@kernel.org>
Signed-off-by: Andrew Morgan <morgan@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For those who don't care about CONFIG_SECURITY.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: James Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Convert LSM into a static interface, as the ability to unload a security
module is not required by in-tree users and potentially complicates the
overall security architecture.

Needlessly exported LSM symbols have been unexported, to help reduce API
abuse.

Parameters for the capability and root_plug modules are now specified
at boot.

The SECURITY_FRAMEWORK_VERSION macro has also been removed.

In a nutshell, there is no safe way to unload an LSM.  The modular interface
is thus unecessary and broken infrastructure.  It is used only by out-of-tree
modules, which are often binary-only, illegal, abusive of the API and
dangerous, e.g.  silently re-vectoring SELinux.

[akpm@linux-foundation.org: cleanups]
[akpm@linux-foundation.org: USB Kconfig fix]
[randy.dunlap@oracle.com: fix LSM kernel-doc]
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Acked-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add recommended section IDs to Documentation/DocBook/filesystems.tmpl
Signed-off-by: Rob Landley <rob@landley.net>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix two htmldocs build breaks, introduced by moving include/linux/usb_gadget.h to
include/linux/usb/gadget.h and combining resume.c and suspend.c into main.c in
drivers/base/power.
Signed-off-by: Rob Landley <rob@landley.net>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add Documentation/RCU/00-INDEX
Signed-off-by: Rob Landley <rob@landley.net>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add recommended section ID tags to deviceiobook.tmpl

Because otherwise the link #anchors in the html vary from build to build.
Signed-off-by: Rob Landley <rob@landley.net>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc for sys_remap_file_pages() and add info to the 'prot' NOTE.
Rename __prot parameter to prot.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch does the following cleanups for Documentation/vm/slabinfo.c:

	- Fix two memory leaks;
	- Constify some char pointers;
	- Use snprintf instead of sprintf in case of buffer overflow;
	- Fix some indentations;
	- Other little improvements.
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

min_free_pages is critical for correctness, document it as such.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This cleans up kdump documentation a bit. Plus I do not think we want
to mention Linux trademark in _every_ file in documentation....
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A couple of updates haven't considered whether the documentation makes
sense as a whole any more.  Three changes here:

 - Remove the reference to the "DAC Addressing for Address Space Hungry
   Devices" section which was deleted by Jan Beulich.
 - Remove the comment about DMA_24BIT_MASK which became obsolete when
   Tobias Klauser changed the code to actually use DMA_24BIT_MASK.
 - Remove the section "64-bit DMA and DAC cycle support" since it's
   fully covered above, and contains a reference to the section deleted
   by Jan.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add Documentation/power/00-INDEX
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add two missing entries to Documentation/powerpc/00-INDEX
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Two 00-INDEX files under Documentation/w1
Signed-off-by: Rob Landley <rob@landley.net>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add missing entries to Documentation/00-INDEX
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The existing Documentation/SM501.txt gives no clue what the chip is or does,
so copy the description from Kconfig help text.
Acked-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch adds the "reset_devices" option (that's used only by one device
driver for now) to the recommended list of command line parameters for kdump.

Meaning (Documentation/kernel-parameters.txt):
    reset_devices   [KNL] Force drivers to reset the underlying device
                    during initialization.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch reflects the
http://git.kernel.org/?p=linux/kernel/git/horms/kexec-tools-testing.git;a=commit;h=b9c3648e690ad0dad12389659673206213a09760
change in kexec-tools-testing also now in the kernel documentation.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>