The chip's page tables did not set up properly on big endian machines,
causing EEH errors on PPC machines.
Reported-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Like ipv4, we have to propagate the ipv6 route peer into
the ipsec top-level route during instantiation.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch pivots the tg3 driver to the new VLAN infrastructure.
All references to vlgrp have been removed.  The driver still attempts to
disable VLAN tag stripping if CONFIG_VLAN_8021Q or
CONFIG_VLAN_8021Q_MODULE is not defined.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bonding documentation used to provide configuration
details and examples for initscripts and sysconfig only.

This patch describe the third possible configuration:
/etc/network/interfaces.
Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a bug that causes TCP RST packets to be generated
on otherwise correctly behaved applications, e.g., no unread data
on close,..., etc. To trigger the bug, at least two conditions must
be met:

1. The FIN flag is set on the last data packet, i.e., it's not on a
separate, FIN only packet.
2. The size of the last data chunk on the receive side matches
exactly with the size of buffer posted by the receiver, and the
receiver closes the socket without any further read attempt.

This bug was first noticed on our netperf based testbed for our IW10
proposal to IETF where a large number of RST packets were observed.
netperf's read side code meets the condition 2 above 100%.

Before the fix, tcp_data_queue() will queue the last skb that meets
condition 1 to sk_receive_queue even though it has fully copied out
(skb_copy_datagram_iovec()) the data. Then if condition 2 is also met,
tcp_recvmsg() often returns all the copied out data successfully
without actually consuming the skb, due to a check
"if ((chunk = len - tp->ucopy.len) != 0) {"
and
"len -= chunk;"
after tcp_prequeue_process() that causes "len" to become 0 and an
early exit from the big while loop.

I don't see any reason not to free the skb whose data have been fully
consumed in tcp_data_queue(), regardless of the FIN flag.  We won't
get there if MSG_PEEK is on. Am I missing some arcane cases related
to urgent data?
Signed-off-by: H.K. Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch adds the device id for the windy31 USB device to the rt73usb
driver.

Thanks to Ralf Flaxa for reporting this and providing testing and a
sample device.
Reported-by: Ralf Flaxa <rf@suse.de>
Tested-by: Ralf Flaxa <rf@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Some drivers (e.g. ath9k) do not always disable beacons when they're
supposed to. When an interface is changed using the change_interface op,
the mode specific sdata part is in an undefined state and trying to
get a beacon at this point can produce weird crashes.

To fix this, add a check for ieee80211_sdata_running before using
anything from the sdata.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This reverts the following set of commits:

d1ed113f ("ipv6: remove duplicate neigh_ifdown")
29ba5fed ("ipv6: don't flush routes when setting loopback down")
9d82ca98 ("ipv6: fix missing in6_ifa_put in addrconf")
2de79570 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept")
8595805a ("IPv6: only notify protocols if address is compeletely gone")
27bdb2ab ("IPv6: keep tentative addresses in hash table")
93fa159a ("IPv6: keep route for tentative address")
8f37ada5 ("IPv6: fix race between cleanup and add/delete address")
84e8b803 ("IPv6: addrconf notify when address is unavailable")
dc2b99f7 ("IPv6: keep permanent addresses on admin down")

because the core semantic change to ipv6 address handling on ifdown
has broken some things, in particular "disable_ipv6" sysctl handling.

Stephen has made several attempts to get things back in working order,
but nothing has restored disable_ipv6 fully yet.
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Tested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Found the following spelling errors while reading the textsearch code:
  "facitilies"  -> "facilities"
  "continously" -> "continuously"
  "arbitary"    -> "arbitrary"
  "patern"      -> "pattern"
  "occurences"  -> "occurrences"

I'll try to push this patch through DaveM, given the only users
of textsearch is in the net/ tree (nf_conntrack_amanda.c, xt_string.c
and em_text.c)
Signed-off-by: Jesper Sander <sander.contrib@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

We will leak the storage allocated by request_firmware() if the size of
the firmware is greater than KAWETH_FIRMWARE_BUF_SIZE.
This removes the leak by calling release_firmware() before we return
-ENOSPC.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Directly cancel adapter->reset_task instead of using to-be-deprecated
flush_scheduled_work().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

TSO does not work if the VLAN tag is in the packet (non-accelerated).
We may be able to remove this restriction in future firmware.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a conflict between commit b00916b1 and a77f5db3. This patch resolves
the conflict by clearing the heap allocation in ethtool_get_regs().

Cc: stable@kernel.org
Signed-off-by: Eugene Teo <eugeneteo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not handle PMTU vs. route lookup creation any differently
wrt. offlink routes, always clone them.
Reported-by: PK <runningdoglackey@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The IEEE get/set app handlers use generic routines and do not
require the net_device to implement the dcbnl_ops routines. This
patch makes it symmetric so user space and drivers do not have
to handle the CEE version and IEEE DCBx versions differently.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit a8b690f9 (tcp: Fix slowness in read /proc/net/tcp)
introduced a bug in handling of SYN_RECV sockets.

st->offset represents number of sockets found since beginning of
listening_hash[st->bucket].

We should not reset st->offset when iterating through
syn_table[st->sbucket], or else if more than ~25 sockets (if
PAGE_SIZE=4096) are in SYN_RECV state, we exit from listening_get_next()
with a too small st->offset

Next time we enter tcp_seek_last_pos(), we are not able to seek past
already found sockets.
Reported-by: PK <runningdoglackey@yahoo.com>
CC: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Family was hard-coded to AF_INET but should be daddr->family.

This fixes crashes when unlinking ipv6 peer entries, since the
unlink code was looking up the base pointer properly.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Suppose that several linear skbs of the same flow were received by GRO. They
were thus merged into one skb with a frag_list. Then a new skb of the same flow
arrives, but it is a paged skb with data starting in its frags[].

Before adding the skb to the frag_list skb_gro_receive() will of course adjust
the skb to throw away the headers. It correctly modifies the page_offset and
size of the frag, but it leaves incorrect information in the skb:
 ->data_len is not decreased at all.
 ->len is decreased only by headlen, as if no change were done to the frag.
Later in a receiving process this causes skb_copy_datagram_iovec() to return
-EFAULT and this is seen in userspace as the result of the recv() syscall.

In practice the bug can be reproduced with the sfc driver. By default the
driver uses an adaptive scheme when it switches between using
napi_gro_receive() (with skbs) and napi_gro_frags() (with pages). The bug is
reproduced when under rx load with enough successful GRO merging the driver
decides to switch from the former to the latter.

Manual control is also possible, so reproducing this is easy with netcat:
 - on machine1 (with sfc): nc -l 12345 > /dev/null
 - on machine2: nc machine1 12345 < /dev/zero
 - on machine1:
   echo 1 > /sys/module/sfc/parameters/rx_alloc_method  # use skbs
   echo 2 > /sys/module/sfc/parameters/rx_alloc_method  # use pages
 - See that nc has quit suddenly.

[v2: Modified by Eric Dumazet to avoid advancing skb->data past the end
     and to use a temporary variable.]
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 941666c2 "net: RCU conversion of dev_getbyhwaddr() and
arp_ioctl()" introduced a regression, reported by Jamie Heilman.
"arp -Ds 192.168.2.41 eth0 pub" triggered the ASSERT_RTNL() assert
in pneigh_lookup()

Removing RTNL requirement from arp_ioctl() was a mistake, just revert
that part.
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a shutdown regression caused by 2a2d31c8 ("intel_idle: open
broadcast clock event").  The clockevent framework can automatically
shutdown broadcast timers for hotremove CPUs.  And we get a shutdown
regression when we shutdown broadcast timer for hot remove CPU, so just
delete some code.

Also fix some section mismatch.
Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: DMA: clear interrupt status correctly
  OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration
  arm: omap3: cm-t3517: minor comment fix
  arm: omap3: cm-t3517: rtc fix
  omap1: Fix sched_clock implementation when both MPU timer and 32K timer are used
  omap1: Fix booting for 15xx and 730 with omap1_defconfig
  omap1: Fix sched_clock for the MPU timer
  OMAP: PRCM: remove duplicated headers
  OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4
  OMAP: counter_32k: init clocksource as part of machine timer init

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Fix time function double declaration with glibc
  perf tools: Fix build by checking if extra warnings are supported
  perf tools: Fix build when using gcc 3.4.6
  perf tools: Add missing header, fixes build
  perf tools: Fix 64 bit integer format strings
  perf test: Fix build on older glibcs
  perf: perf_event_exit_task_context: s/rcu_dereference/rcu_dereference_raw/
  perf test: Use cpu_map->[cpu] when setting affinity
  perf symbols: Fix annotation of thumb code
  perf: Annotate cpuctx->ctx.mutex to avoid a lockdep splat
  powerpc, perf: Fix frequency calculation for overflowing counters (FSL version)
  perf: Fix perf_event_init_task()/perf_event_free_task() interaction
  perf: Fix find_get_context() vs perf_event_exit_task() race

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  RTC: Remove Kconfig symbol for UIE emulation
  RTC: Properly handle rtc_read_alarm error propagation and fix bug
  RTC: Propagate error handling via rtc_timer_enqueue properly
  acpi_pm: Clear pmtmr_ioport if acpi_pm initialization fails
  rtc: Cleanup removed UIE emulation declaration
  hrtimers: Notify hrtimer users of switches to NOHZ mode

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix poor interactivity on UP systems due to group scheduler nice tune bug

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix jump label with RO/NX module protection crash
  x86, hotplug: Fix powersavings with offlined cores on AMD
  x86, mcheck, therm_throt.c: Export symbol platform_thermal_notify to allow coretemp to handler intr
  x86: Use asm-generic/cacheflush.h
  x86: Update CPU cache attributes table descriptors

Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox
0 may be send under certain conditions (even if disabled or in rx mode).

The workaround in the errata suggests not to use the mailbox and load it
with an unused identifier.

This patch implements the second part of the workaround. A sysfs entry
"mb0_id" is introduced. While the interface is down it can be used to
configure the can_id of mailbox 0. The default value id 0x7ff.

In order to use an extended can_id add the CAN_EFF_FLAG (0x80000000U)
to the can_id. Example:

- standard id 0x7ff:
echo 0x7ff      > /sys/class/net/can0/mb0_id

- extended id 0x1fffffff:
echo 0x9fffffff > /sys/class/net/can0/mb0_id
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
For the Documentation-part:
Acked-by: Wolfram Sang <w.sang@pengutronix.de>

Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox
0 may be send under certain conditions (even if disabled or in rx mode).

The workaround in the errata suggests not to use the mailbox and load it
with a unused identifier.

This patch implements the first part of the workaround, it updates
AT91_MB_RX_NUM and AT91_MB_RX_FIRST (and the inline documentation)
so that mailbox 0 stays unused.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>

This patch cleans up the usage of two macros which specify the mailbox
usage. AT91_MB_RX_FIRST and AT91_MB_RX_NUM define the first and the
number of RX mailboxes. The current driver uses these variables in an
unclean way; assuming that AT91_MB_RX_FIRST is 0;

This patch cleans up the usage of these macros, no longer assuming
AT91_MB_RX_FIRST == 0.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>

Michael Witten and Christian Kujau reported that the autogroup
scheduling feature hurts interactivity on their UP systems.

It turns out that this is an older bug in the group scheduling code,
and the wider appeal provided by the autogroup feature exposed it
more prominently.

When on UP with FAIR_GROUP_SCHED enabled, tune shares
only affect tg->shares, but is not reflected in
tg->se->load. The reason is that update_cfs_shares()
does nothing on UP.

So introduce update_cfs_shares() for UP && FAIR_GROUP_SCHED.

This issue was found when enable autogroup scheduling was enabled,
but it is an older bug that also exists on cgroup.cpu on UP.
Reported-and-Tested-by: Michael Witten <mfwitten@gmail.com>
Reported-and-Tested-by: Christian Kujau <christian@nerdbynature.de>
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110124073352.GA24186@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'BUG_ON' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  Remove MAYBE_BUILD_BUG_ON
  BUILD_BUG_ON: make it handle more cases

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: fix missing semicolons in MODULE macro usage
  param: add null statement to compiled-in module params
  module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n
  module: show version information for built-in modules in sysfs

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  selinux: return -ENOMEM when memory allocation fails
  tpm: fix panic caused by "tpm: Autodetect itpm devices"
  TPM: Long default timeout fix
  trusted keys: Fix a memory leak in trusted_update().
  keys: add trusted and encrypted maintainers
  encrypted-keys: rename encrypted_defined files to encrypted
  trusted-keys: rename trusted_defined files to trusted

Now BUILD_BUG_ON() can handle optimizable constants, we don't need
MAYBE_BUILD_BUG_ON any more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

BUILD_BUG_ON used to use the optimizer to do code elimination or fail
at link time; it was changed to first the size of a negative array (a
nicer compile time error), then (in
8c87df45) to a bitfield.

This forced us to change some non-constant cases to MAYBE_BUILD_BUG_ON();
as Jan points out in that commit, it didn't work as intended anyway.

bitfields: needs a literal constant at parse time, and can't be put under
	"if (__builtin_constant_p(x))" for example.
negative array: can handle anything, but if the compiler can't tell it's
	a constant, silently has no effect.
link time: breaks link if the compiler can't determine the value, but the
	linker output is not usually as informative as a compiler error.

If we use the negative-array-size method *and* the link time trick,
we get the ability to use BUILD_BUG_ON() under __builtin_constant_p()
branches, and maximal ability for the compiler to detect errors at
build time.

We also document it thoroughly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jan Beulich <JBeulich@novell.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>

You always needed them when you were a module, but the builtin versions
of the macros used to be more lenient.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Add an unused struct declaration statement requiring a
terminating semicolon to the compile-in case to provoke an
error if __MODULE_INFO() is used without the terminating
semicolon. Previously MODULE_ALIAS("foo") (no semicolon)
compiled fine if MODULE was not selected.

Cc: Dan Carpenter <error27@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>