- 04 Jan, 2016 1 commit
-
-
Geliang Tang authored
Use dev_to_hdac_dev() and to_ehdac_device() instead of open-coding. Signed-off-by:
Geliang Tang <geliangtang@163.com> Reviewed-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- 19 Dec, 2015 10 commits
-
-
Pierre-Louis Bossart authored
The upstreamed code modified the control names from Mute to Switch without changing the logic. To get audio working the Switch needs to be off which isn't aligned with normal ALSA conventions. Inverting the logic now so that Switch Off means mute and Switch On means active audio using the specific volume setting. Signed-off-by:
Sebastien Guiriec <sebastien.guiriec@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
the fields channels_min, channels_max, rate and formats are irrelevant for compressed playback, they will depend on the content. This was probably a copy-paste mistake to have them in the first place Signed-off-by:
-
Pierre-Louis Bossart authored
DSP firmware supports 24-bit data, expose functionality to userspace/apps. Signed-off-by:
-
Pierre-Louis Bossart authored
Add dai links to enable additional playback stream with deeper buffer for lower power consumption. The normal and DEEP_buffer streams are not mutually exclusive, content will be mixed by the DSP. Signed-off-by:
-
Pierre-Louis Bossart authored
Add definitions for MERR_DPCM_DEEP_BUFFER AND PIPE_MEDIA3_IN Add relevant cpu-dai and dai link names Signed-off-by:
-
Pierre-Louis Bossart authored
All the functionality was merged in DPCM-based driver, keep older driver to avoid breaking userspace but tag it as unsupported/deprecated Signed-off-by:
-
Pierre-Louis Bossart authored
Merge DMI quirks for various machines such as Asus T100 and clean-up code Signed-off-by:
-
Pierre-Louis Bossart authored
first renaming and reducing delta with byt-rt5640 code before dmi-based quirks are enabled Signed-off-by:
-
Pierre-Louis Bossart authored
initial cleanup to use same pins Signed-off-by:
-
Sebastien Guiriec authored
Using the hw_fixup function in order to overwrite the default SSP setting for Audio DSP port connected to the codec. Instead of TDM 4ch use I2S 2ch 24 bits. Signed-off-by:
-
- 18 Dec, 2015 9 commits
-
-
Jeeja KP authored
When pipeline is deleted, set the pipeline state to invalid state. Signed-off-by:
Jeeja KP <jeeja.kp@intel.com> Signed-off-by:
-
Jeeja KP authored
This patch adds clean up routine to clear the stream registers and calls this routine before setting up stream registers. Signed-off-by:
-
Fang, Yang A authored
This machine supports HDMI/DP ports so add these ports and its FE and BE DAIlinks Signed-off-by:
Fang, Yang A <yang.a.fang@intel.com> Signed-off-by:
-
Sathyanarayana Nujella authored
We have WOV module which should act as DAPM sink, so add that and its links. Also rename the refcap to "Wake On Voice" as some user expect to find this name Signed-off-by:
Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by:
-
Yong Zhi authored
We have specific constraints for FE device (48KHz, stereo, 16 bits) and fixups for BE DMIC links (2 or 4 ch), so add those. Also add one more FE DAIlink for dmiccap Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
-
Yong Zhi authored
We don't support ignore suspend on few devices so remove that. Also since we support ignore susend on PDM DMIC, add that Signed-off-by:
-
Fang, Yang A authored
The DAPM map for DMIC and SSP was not properly done, so fix that up. Also mark machine as fully routed Signed-off-by:
-
Rohit Ainapure authored
This adds Skylake I2S machine driver which uses NAU88L25 as anlog codec and MAX98357A as speakers Signed-off-by:
Rohit Ainapure <rohit.m.ainapure@intel.com> Signed-off-by:
-
Rohit Ainapure authored
Add the NAU88L25 + MAX98357A machine driver entry into the machine table Signed-off-by:
-
- 16 Dec, 2015 3 commits
-
-
Dan Carpenter authored
"data" is a u32 pointer so this copies the information to wrong place entirely. Fixes: 140adfba ('ASoC: Intel: Skylake: Add tlv byte kcontrols') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Dharageswari R <dharageswari.r@intel.com> Signed-off-by:
-
Dan Carpenter authored
These need to be signed because they hold negative error codes. Signed-off-by:
-
Jie Yang authored
sst_memcpy32() only copied bytes/4 32bits, which means it dropped the remaining bytes%4 bytes wrongly. Here add copying those missing bytes, first to a 32bits tmp, and then write the tmp to 32bits iomem. Signed-off-by:
Jie Yang <yang.jie@intel.com> Signed-off-by:
-
- 14 Dec, 2015 1 commit
-
-
Liam Girdwood authored
If driver received a message that it can't handle, it won't clear the corresponding bit and unmask interrupt, this may lock the IRQ and DSP can't send message anymore. To fix the issue, we should Always update IMRX after IPC. Here we always clear the DONE/BUSY bit and unmask the IRQ source, even when IPC failures have occurred previously. Signed-off-by:
Liam Girdwood <liam.r.girdwood@linux.intel.com> Modified-by:
-
- 09 Dec, 2015 1 commit
-
-
Mark Brown authored
Merge branch 'topic/sink' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
-
- 08 Dec, 2015 12 commits
-
-
Praveen Diwakar authored
We should only add ignore suspend flag for some DAIs and not all. This patches removes it from the DAIs where we do not support this It also marks the endpoints for which ignore_suspend should be enabled Signed-off-by:
Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by:
Vunny Sodhi <vunnyx.sodhi@intel.com> Signed-off-by:
-
Jeeja KP authored
Some of the usecases can be marked as 'ignore_suspend' by machine. For these on suspend we should keep audio controller ON by saving the state and not suspending the device For this we need to maintain a counter for these streams and be active on suspend when such a stream is opened. Signed-off-by:
-
Vinod Koul authored
DAPM Machine map for machine was not specifying the paths correctly. The correct order should be: "DMIC01 Rx" (SoC DMIC BE), connected to "DMIC AIF" (DMic Codec AIF) and then "DMic" (DMic codec Input) connected to "SoC DMIC" (Machine DMIC MIC Widget) Signed-off-by:
-
Vinod Koul authored
Signed-off-by:
-
Jeeja KP authored
Since in Skylake we support another DAI for DMIC quad capture, add a dailink for this as well. Also specify constrains for DMIC FE devices and fixup for DMIC BEs Signed-off-by:
-
Omair M Abdullah authored
If a module is ON then we should read the module parameters from DSP rather than driver cached values Signed-off-by:
Omair M Abdullah <omair.m.abdullah@intel.com> Signed-off-by:
-
Mousami Jana authored
For messages which have larger payload than mailbox data, we need to split the payload using set of messages containing mailbox size as payload. For sending such payload we already support LARGE_CONFIG_SET IPCs and now to query such payload add LARGE_CONFIG_GET IPC Signed-off-by:
Mousami Jana <mousami.janax@intel.com> Signed-off-by:
-
Omair M Abdullah authored
SKL actual mailbox size is 0x10000 and initial values were 0x800, so update these accordingly Signed-off-by:
-
Jeeja KP authored
Module initialization parameter data can be set by - INIT_INSTANCE IPC by using the default value - SET_PARAMS immediately after INIT_INSTANCE - SET_PARAMS data from kcontrol values set this patch add param type to identify the parameters has to be sent to DSP. Signed-off-by: -
Dharageswari R authored
Mic select is a DSP module which is used to select one or many inputs to form an output. This is useful to select data selectively from PDM input and hence the name. This module is of generic module type. This patch adds support to add and configure Mic select module in firmware topology. Signed-off-by:
-
Jeeja KP authored
A module can require extra memory for processing, like audio algorithms. The memory for these modules needs to be represented in base module configuration and passed to DSP on init, so add the memory pages as a field in widget data Signed-off-by:
-
Dharageswari R authored
A module is loaded when the path consisting the module is opened. The module binary(ies) is loaded from file system and cached in kernel memory for future use. This is downloaded to DSP using DMA and invoking Load module IPCs This patch adds support for load/unload module IPCs, DMAing modules and manging the modules Signed-off-by:
-
- 01 Dec, 2015 3 commits
-
-
Jeeja KP authored
This adds tlv bytes topology control creation and control load to initialize kcontrol data. And this also adds the callbacks for the these tlv byte kcontrols Signed-off-by:
Mythri P K <mythri.p.k@intel.com> Signed-off-by:
Divya Prakash <divya1.prakash@intel.com> Signed-off-by:
-
Jeeja KP authored
This adds support to configure module parameter during module initialization or after module init using set module param required by the DSP firmware sequence. Signed-off-by:
-
Jeeja KP authored
Some DSP modules has user configurable parameters, which are required by some modules at module initialization. To configure the module algorithm parameter during initialization we add helpers here Signed-off-by:
-
