This file contains both	admin and development stuff. Split on
two, as	they're	usually	read by	different audiences.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This file contains both admin and development stuff. Split on
two, as they're usually read by different audiences.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The vimc driver has some kerneldoc markups, plus admin info.
Split it into two files.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Instead of placing both info from admin PoV and uAPI at the
same place, split into two separate documents.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The ci.rst file contains two parts: the first one describing
how to use the CA high level interface; the second one with
uAPI internals.

Split this on two separate files, adding the uAPI bits
to the DVB ca.rst configuration.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In order to be able to better organize the subsystem, split the
cpia2 information on two files: one user-facing and another one
from Kernel development PoV.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As the entire soc_camera driver is on staging to be removed
soon, let's place there its documentation too.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There's a table on this file, with aren't using the ReST
markups. Fix that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

While making the menu invisible seemed a good idea, there's
a drawback: when the menu is not visible, it is not parsing
the "default" dependency.

So, instead, let's just avoid the items at the menu to be
prompted, by using the "prompt ... if" construction.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Right now, there are I2C drivers that don't depend on
camera support before and after those.

Move the camera support drivers to the end, and add
a notice at the "endif", in order to make easier to
maintain and to avoid adding extra dependencies at
the other i2c/*/Kconfig files.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

After this change, the menu is displayed like above.

1) When filtering is not active:

    --- Multimedia support
        [ ]   Filter devices by their types
        [*]   Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends)
              Media core support  --->
              Video4Linux options  --->
              Media controller options  --->
              Digital TV options  --->
              HDMI CEC options  --->
              Media drivers  --->

2) When filtering is active:

    --- Multimedia support
        [*]   Filter devices by their types
        [*]   Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends)
              Media device types  --->
              Video4Linux options  --->
              Media controller options  --->
              Digital TV options  --->
              HDMI CEC options  --->
              Media drivers  --->

The per-API menu will only be displayed if the corresponding
core support is enabled.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Advanced and embedded users know what to do, so, by default,
they will likely want to be able to open the entire set of
Kconfig media options.

Normal "poor" users usually needs more help when setting
stuff, so let's open an more simplified version to them by
default.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Let's place the sub-driver-autoselection option just below
the device filtering one, as it also controls a filter menu,
with is not even visible if !EXPERT && !EMBEDDED.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

That should make easier for people setting the media
subsystem config options, as they'll be split by the
type of functionality that will be enabled.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Let's place the main API selections at the media/Kconfig file,
as this way we can better organize things.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This option is part of V4L2 API extra functionality set.
Move it to be at the v4l2-core/Kconfig, where it belongs,
cleaning the main Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In order to cleanup the main media Kconfig, move the DVB-core
specific options to dvb-core/Kconfig.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There's no need to have the CEC definitions inside the
media Kconfig, as the Kconfig parser doesn't require
symbols to be declared before their usages.

With that, the main Kconfig menu becomes cleaner.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As per a tester feedback, add an option to report when
the drivers are filtered at the Kconfig menu.

Cc: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The per-device option selection is a feature that some
developers love, while others hate...

So, let's make both happy by making it optional.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The media subsystem has hundreds of driver-specific options.
The *_SUPPORT config options work as a sort of filter,
allowing to reduce its complexity for users that won't
want to dig into thousands of options they don't need.

Yet, it the filtering options are becoming large. So, let's
place it on a sub-menu.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The comments before some of the drivers support look
weird, because their Kconfig have their own "comment"
directive inside it. So, rearrange them to make it
look a little nicer for the ones with are not too
familiar with the media system.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are lots of drivers that only work when the media controller
and/or the V4L2 subdev APIs are present.

Right now, someone need to first enable those APIs before
using those drivers.

Well, ideally, drivers, should, instead *optionally*
depend on it, in order for PC camera drivers to be able to use
them, but nowadays most drivers are UVC cameras, with don't
require a sensor driver.

So, be it.

Let's instead make them select the MEDIA_CONTROLLER and the
SUBDEV API, in order to make easier for people to be able
of enabling them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

All modern Linux distributions nowadays use udev or some
alternative (like systemd). So, it makes sense to change
the default to use dynamic minors.

Please notice that this default doesn't enable any code.
It just changes the dvb-core behavior.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Most of media Kconfig/Makefile files already has SPDX,
but there are a few ones still missing. Add it to them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are some long-time mistakes related to build test
drivers, with regards to depends on/select. Also, as we
now want to build any test driver without needing to
enable anything else, change the logic in order to properly
filter them.

Please notice that the PCI skeleton is somewhat an
exception, as it requires to select *both* SAMPLES and
MEDIA_TEST_SUPPORT. I almost changed it to be either one,
but decided to keep it as-is, as this is something that
we don't really need to be included on any distribution.

The only reason for someone to build it is for COMPILE_TEST
purposes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Right now, if one has an hybrid TV card, it has to select
both analog and digital TV support, as otherwise the needed
core support won't be selected.

Change the logic to auto-select the core support for those
drivers, as this is a way more intuitive.

It should be noticed that, as now both DVB_CORE and VIDEO_DEV
defaults depends on selecting a hybrid cards, we had to remove
the explicit dependencies there, in order to avoid circular
dependencies.

That requires some tricks:

1) the prompt should not be not visible when an hybrid card
   is selected, as the user shold not change it.

2) When a media hybrid device is selected, the modular
   option for DVB_CORE and VIDEO_DEV will follow the
   MEDIA_SUPPORT dependency, as we can't have a core
   built with "y" with a driver built as module.

Note: while here, moved two pure V4L2 PCI drivers out of the
"hybrid" part of config and consider pvrusb2 as an hybrid
device.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

both DVB_CORE and VIDEO_DEV already depends on MEDIA_SUPPORT,
as they're below an if block.

So, remove this double dependency.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Neither the PCI skeleton nor the DVB dummy driver are real
drivers. They're there just as an example for a driver
writter.

Distros should not enable those drivers. So, hide them if
MEDIA_TEST_SUPPORT is not selected.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Cleanup the ddbridge's dummy driver by removing the parts
that aren't needed by ddbridge, adding it to the building
system and changing the binding at the driver to use the
newer function name.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As the name of this driver is now ddbridge-dummy, do some
renames internally.

No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As we'll be transforming the dvb-dummy-fe driver soon into a
virtual driver, let's first copy the existing one to ddbridge
as-is, as it is needed there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This comment should only be visible if the DVB_FIREDTV
config will show.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This option is used only by av7110 and by an USB driver. As
the av7110 is the first DVB hardware, hardly found those
days, let's opt to place it at usb/Kconfig, as the driver
with needs it might have a longer lifetime.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Showing this comment without showing the Siano mmc option
is very weird! Place the option together, and make it
visible only when showing Siano configuration.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When the first test device was added (vivi.c), there were just
one file. I was too lazy on that time to create a separate
directory just for it, so I kept it together with platform.

Now, we have vivid, vicodec, vim2m and vimc. Also, a new
virtual driver has been prepared to support DVB API.

So, it is time to solve this mess, by placing test stuff
on a separate directory.

It should be noticed that we also have some skeleton drivers
(for V4L and for DVB). For now, we'll keep them separate,
as they're not really test drivers, but instead, just
examples. The DVB frontend ones will likely be part of a new DVB
test driver. By that time, it should make sense to move them
here as well.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are more things than just cameras and TV devices on
media. Update the help message accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The V4L2 PCI skeleton is not part of the V4L2 core. Move it
to appear together with the other PCI drivers, at the end,
as this is something that normal users don't even need to
bother.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When the platform drivers got added, they were all part of
complex camera support. This is not the case anymore, as we
now have codecs and other stuff there too.

So, fix the dependencies, in order to not require users to
manually select something that it doesn't make sense.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Most systems don't need support for those, while others only
need those, instead of the others.

So, add an option to filter in/out platform drivers.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>