- 09 Oct, 2012 40 commits
-
-
Michel Lespinasse authored
anon_vma_clone() expects new_vma->vm_{start,end,pgoff} to be correctly set so that the new vma can be indexed on the anon interval tree. copy_vma() was failing to do that, which broke mremap(). Signed-off-by:Michel Lespinasse <walken@google.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Hugh Dickins <hughd@google.com> Tested-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
Add a CONFIG_DEBUG_VM_RB build option for the previously existing DEBUG_MM_RB code. Now that Andi Kleen modified it to avoid using recursive algorithms, we can expose it a bit more. Also extend this code to validate_mm() after stack expansion, and to check that the vma's start and last pgoffs have not changed since the nodes were inserted on the anon vma interval tree (as it is important that the nodes be reindexed after each such update). Signed-off-by:
-
Michel Lespinasse authored
In file and anon rmap, we use interval trees to find potentially relevant vmas and then call vma_address() to find the virtual address the given page might be found at in these vmas. vma_address() used to include a check that the returned address falls within the limits of the vma, but this check isn't necessary now that we always use interval trees in rmap: the interval tree just doesn't return any vmas which this check would find to be irrelevant. As a result, we can replace the use of -EFAULT error code (which then needed to be checked in every call site) with a VM_BUG_ON(). Signed-off-by:
-
Michel Lespinasse authored
When a large VMA (anon or private file mapping) is first touched, which will populate its anon_vma field, and then split into many regions through the use of mprotect(), the original anon_vma ends up linking all of the vmas on a linked list. This can cause rmap to become inefficient, as we have to walk potentially thousands of irrelevent vmas before finding the one a given anon page might fall into. By replacing the same_anon_vma linked list with an interval tree (where each avc's interval is determined by its vma's start and last pgoffs), we can make rmap efficient for this use case again. While the change is large, all of its pieces are fairly simple. Most places that were walking the same_anon_vma list were looking for a known pgoff, so they can just use the anon_vma_interval_tree_foreach() interval tree iterator instead. The exception here is ksm, where the page's index is not known. It would probably be possible to rework ksm so that the index would be known, but for now I have decided to keep things simple and just walk the entirety of the interval tree there. When updating vma's that already have an anon_vma assigned, we must take care to re-index the corresponding avc's on their interval tree. This is done through the use of anon_vma_interval_tree_pre_update_vma() and anon_vma_interval_tree_post_update_vma(), which remove the avc's from their interval tree before the update and re-insert them after the update. The anon_vma stays locked during the update, so there is no chance that rmap would miss the vmas that are being updated. Signed-off-by:
-
Michel Lespinasse authored
mremap() had a clever optimization where move_ptes() did not take the anon_vma lock to avoid a race with anon rmap users such as page migration. Instead, the avc's were ordered in such a way that the origin vma was always visited by rmap before the destination. This ordering and the use of page table locks rmap usage safe. However, we want to replace the use of linked lists in anon rmap with an interval tree, and this will make it harder to impose such ordering as the interval tree will always be sorted by the avc->vma->vm_pgoff value. For now, let's replace the anon_vma_moveto_tail() ordering function with proper anon_vma locking in move_ptes(). Once we have the anon interval tree in place, we will re-introduce an optimization to avoid taking these locks in the most common cases. Signed-off-by:
-
Michel Lespinasse authored
Update the generic interval tree code that was introduced in "mm: replace vma prio_tree with an interval tree". Changes: - fixed 'endpoing' typo noticed by Andrew Morton - replaced include/linux/interval_tree_tmpl.h, which was used as a template (including it automatically defined the interval tree functions) with include/linux/interval_tree_generic.h, which only defines a preprocessor macro INTERVAL_TREE_DEFINE(), which itself defines the interval tree functions when invoked. Now that is a very long macro which is unfortunate, but it does make the usage sites (lib/interval_tree.c and mm/interval_tree.c) a bit nicer than previously. - make use of RB_DECLARE_CALLBACKS() in the INTERVAL_TREE_DEFINE() macro, instead of duplicating that code in the interval tree template. - replaced vma_interval_tree_add(), which was actually handling the nonlinear and interval tree cases, with vma_interval_tree_insert_after() which handles only the interval tree case and has an API that is more consistent with the other interval tree handling functions. The nonlinear case is now handled explicitly in kernel/fork.c dup_mmap(). Signed-off-by:
-
Michel Lespinasse authored
Provide rb_insert_augmented() and rb_erase_augmented() through a new rbtree_augmented.h include file. rb_erase_augmented() is defined there as an __always_inline function, in order to allow inlining of augmented rbtree callbacks into it. Since this generates a relatively large function, each augmented rbtree user should make sure to have a single call site. Signed-off-by:
-
Michel Lespinasse authored
After both prio_tree users have been converted to use red-black trees, there is no need to keep around the prio tree library anymore. Signed-off-by:
-
Michel Lespinasse authored
kmemleak uses a tree where each node represents an allocated memory object in order to quickly find out what object a given address is part of. However, the objects don't overlap, so rbtrees are a better choice than prio tree for this use. They are both faster and have lower memory overhead. Tested by booting a kernel with kmemleak enabled, loading the kmemleak_test module, and looking for the expected messages. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
-
Michel Lespinasse authored
Implement an interval tree as a replacement for the VMA prio_tree. The algorithms are similar to lib/interval_tree.c; however that code can't be directly reused as the interval endpoints are not explicitly stored in the VMA. So instead, the common algorithm is moved into a template and the details (node type, how to get interval endpoints from the node, etc) are filled in using the C preprocessor. Once the interval tree functions are available, using them as a replacement to the VMA prio tree is a relatively simple, mechanical job. Signed-off-by:
-
Michel Lespinasse authored
Patch 1 implements support for interval trees, on top of the augmented rbtree API. It also adds synthetic tests to compare the performance of interval trees vs prio trees. Short answers is that interval trees are slightly faster (~25%) on insert/erase, and much faster (~2.4 - 3x) on search. It is debatable how realistic the synthetic test is, and I have not made such measurements yet, but my impression is that interval trees would still come out faster. Patch 2 uses a preprocessor template to make the interval tree generic, and uses it as a replacement for the vma prio_tree. Patch 3 takes the other prio_tree user, kmemleak, and converts it to use a basic rbtree. We don't actually need the augmented rbtree support here because the intervals are always non-overlapping. Patch 4 removes the now-unused prio tree library. Patch 5 proposes an additional optimization to rb_erase_augmented, now providing it as an inline function so that the augmented callbacks can be inlined in. This provides an additional 5-10% performance improvement for the interval tree insert/erase benchmark. There is a maintainance cost as it exposes augmented rbtree users to some of the rbtree library internals; however I think this cost shouldn't be too high as I expect the augmented rbtree will always have much less users than the base rbtree. I should probably add a quick summary of why I think it makes sense to replace prio trees with augmented rbtree based interval trees now. One of the drivers is that we need augmented rbtrees for Rik's vma gap finding code, and once you have them, it just makes sense to use them for interval trees as well, as this is the simpler and more well known algorithm. prio trees, in comparison, seem *too* clever: they impose an additional 'heap' constraint on the tree, which they use to guarantee a faster worst-case complexity of O(k+log N) for stabbing queries in a well-balanced prio tree, vs O(k*log N) for interval trees (where k=number of matches, N=number of intervals). Now this sounds great, but in practice prio trees don't realize this theorical benefit. First, the additional constraint makes them harder to update, so that the kernel implementation has to simplify things by balancing them like a radix tree, which is not always ideal. Second, the fact that there are both index and heap properties makes both tree manipulation and search more complex, which results in a higher multiplicative time constant. As it turns out, the simple interval tree algorithm ends up running faster than the more clever prio tree. This patch: Add two test modules: - prio_tree_test measures the performance of lib/prio_tree.c, both for insertion/removal and for stabbing searches - interval_tree_test measures the performance of a library of equivalent functionality, built using the augmented rbtree support. In order to support the second test module, lib/interval_tree.c is introduced. It is kept separate from the interval_tree_test main file for two reasons: first we don't want to provide an unfair advantage over prio_tree_test by having everything in a single compilation unit, and second there is the possibility that the interval tree functionality could get some non-test users in kernel over time. Signed-off-by:
-
Michel Lespinasse authored
As proposed by Peter Zijlstra, this makes it easier to define the augmented rbtree callbacks. Signed-off-by:
-
Michel Lespinasse authored
convert arch/x86/mm/pat_rbtree.c to the proposed augmented rbtree api and remove the old augmented rbtree implementation. Signed-off-by:
Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Michel Lespinasse authored
Introduce new augmented rbtree APIs that allow minimal recalculation of augmented node information. A new callback is added to the rbtree insertion and erase rebalancing functions, to be called on each tree rotations. Such rotations preserve the subtree's root augmented value, but require recalculation of the one child that was previously located at the subtree root. In the insertion case, the handcoded search phase must be updated to maintain the augmented information on insertion, and then the rbtree coloring/rebalancing algorithms keep it up to date. In the erase case, things are more complicated since it is library code that manipulates the rbtree in order to remove internal nodes. This requires a couple additional callbacks to copy a subtree's augmented value when a new root is stitched in, and to recompute augmented values down the ancestry path when a node is removed from the tree. In order to preserve maximum speed for the non-augmented case, we provide two versions of each tree manipulation function. rb_insert_augmented() is the augmented equivalent of rb_insert_color(), and rb_erase_augmented() is the augmented equivalent of rb_erase(). Signed-off-by:
-
Michel Lespinasse authored
Small test to measure the performance of augmented rbtrees. Signed-off-by:
-
Michel Lespinasse authored
Various minor optimizations in rb_erase(): - Avoid multiple loading of node->__rb_parent_color when computing parent and color information (possibly not in close sequence, as there might be further branches in the algorithm) - In the 1-child subcase of case 1, copy the __rb_parent_color field from the erased node to the child instead of recomputing it from the desired parent and color - When searching for the erased node's successor, differentiate between cases 2 and 3 based on whether any left links were followed. This avoids a condition later down. - In case 3, keep a pointer to the erased node's right child so we don't have to refetch it later to adjust its parent. - In the no-childs subcase of cases 2 and 3, place the rebalance assigment last so that the compiler can remove the following if(rebalance) test. Also, added some comments to illustrate cases 2 and 3. Signed-off-by:
-
Michel Lespinasse authored
An interesting observation for rb_erase() is that when a node has exactly one child, the node must be black and the child must be red. An interesting consequence is that removing such a node can be done by simply replacing it with its child and making the child black, which we can do efficiently in rb_erase(). __rb_erase_color() then only needs to handle the no-childs case and can be modified accordingly. Signed-off-by:
-
Michel Lespinasse authored
In rb_erase, move the easy case (node to erase has no more than 1 child) first. I feel the code reads easier that way. Signed-off-by:
-
Michel Lespinasse authored
Add __rb_change_child() as an inline helper function to replace code that would otherwise be duplicated 4 times in the source. No changes to binary size or speed. Signed-off-by:
-
Michel Lespinasse authored
Just a small fix to make sparse happy. Signed-off-by:
Fengguang Wu <wfg@linux.intel.com> Acked-by:
-
Michel Lespinasse authored
When looking to fetch a node's sibling, we went through a sequence of: - check if node is the parent's left child - if it is, then fetch the parent's right child This can be replaced with: - fetch the parent's right child as an assumed sibling - check that node is NOT the fetched child This avoids fetching the parent's left child when node is actually that child. Saves a bit on code size, though it doesn't seem to make a large difference in speed. Signed-off-by:
-
Michel Lespinasse authored
Set comment and indentation style to be consistent with linux coding style and the rest of the file, as suggested by Peter Zijlstra Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Daniel Santos <daniel.santos@pobox.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Michel Lespinasse authored
In __rb_erase_color(), we often already have pointers to the nodes being rotated and/or know what their colors must be, so we can generate more efficient code than the generic __rb_rotate_left() and __rb_rotate_right() functions. Also when the current node is red or when flipping the sibling's color, the parent is already known so we can use the more efficient rb_set_parent_color() function to set the desired color. Signed-off-by:
-
Michel Lespinasse authored
In __rb_erase_color(), we have to select one of 3 cases depending on the color on the 'other' node children. If both children are black, we flip a few node colors and iterate. Otherwise, we do either one or two tree rotations, depending on the color of the 'other' child opposite to 'node', and then we are done. The corresponding logic had duplicate checks for the color of the 'other' child opposite to 'node'. It was checking it first to determine if both children are black, and then to determine how many tree rotations are required. Rearrange the logic to avoid that extra check. Signed-off-by:
-
Michel Lespinasse authored
In __rb_erase_color(), we were always setting a node to black after exiting the main loop. And in one case, after fixing up the tree to satisfy all rbtree invariants, we were setting the current node to root just to guarantee a loop exit, at which point the root would be set to black. However this is not necessary, as the root of an rbtree is already known to be black. The only case where the color flip is required is when we exit the loop due to the current node being red, and it's easiest to just do the flip at that point instead of doing it after the loop. [adrian.hunter@intel.com: perf tools: fix build for another rbtree.c change] Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Signed-off-by:
-
Michel Lespinasse authored
- Use the newly introduced rb_set_parent_color() function to flip the color of nodes whose parent is already known. - Optimize rb_parent() when the node is known to be red - there is no need to mask out the color in that case. - Flipping gparent's color to red requires us to fetch its rb_parent_color field, so we can reuse it as the parent value for the next loop iteration. - Do not use __rb_rotate_left() and __rb_rotate_right() to handle tree rotations: we already have pointers to all relevant nodes, and know their colors (either because we want to adjust it, or because we've tested it, or we can deduce it as black due to the node proximity to a known red node). So we can generate more efficient code by making use of the node pointers we already have, and setting both the parent and color attributes for nodes all at once. Also in Case 2, some node attributes don't have to be set because we know another tree rotation (Case 3) will always follow and override them. Signed-off-by:
-
Michel Lespinasse authored
The root node of an rbtree must always be black. However, rb_insert_color() only needs to maintain this invariant when it has been broken - that is, when it exits the loop due to the current (red) node being the root. In all other cases (exiting after tree rotations, or exiting due to an existing black parent) the invariant is already satisfied, so there is no need to adjust the root node color. Signed-off-by:
-
Michel Lespinasse authored
It is a well known property of rbtrees that insertion never requires more than two tree rotations. In our implementation, after one loop iteration identified one or two necessary tree rotations, we would iterate and look for more. However at that point the node's parent would always be black, which would cause us to exit the loop. We can make the code flow more obvious by just adding a break statement after the tree rotations, where we know we are done. Additionally, in the cases where two tree rotations are necessary, we don't have to update the 'node' pointer as it wouldn't be used until the next loop iteration, which we now avoid due to this break statement. Signed-off-by:
-
Michel Lespinasse authored
This small module helps measure the performance of rbtree insert and erase. Additionally, we run a few correctness tests to check that the rbtrees have all desired properties: - contains the right number of nodes in the order desired, - never two consecutive red nodes on any path, - all paths to leaf nodes have the same number of black nodes, - root node is black [akpm@linux-foundation.org: fix printk warning: sparc64 cycles_t is unsigned long] Signed-off-by:
-
Michel Lespinasse authored
rbtree users must use the documented APIs to manipulate the tree structure. Low-level helpers to manipulate node colors and parenthood are not part of that API, so move them to lib/rbtree.c [dwmw2@infradead.org: fix jffs2 build issue due to renamed __rb_parent_color field] Signed-off-by:
-
Michel Lespinasse authored
The recently added code to use rbtrees in sysctl did not follow the proper rbtree interface on insertion - it was calling rb_link_node() which inserts a new node into the binary tree, but missed the call to rb_insert_color() which properly balances the rbtree and establishes all expected rbtree invariants. I found out about this only because faulty commit also used rb_init_node(), which I am removing within this patchset. But I think it's an easy mistake to make, and it makes me wonder if we should change the rbtree API so that insertions would be done with a single rb_insert() call (even if its implementation could still inline the rb_link_node() part and call a private __rb_insert_color function to do the rebalancing). Signed-off-by:
-
Michel Lespinasse authored
Empty nodes have no color. We can make use of this property to simplify the code emitted by the RB_EMPTY_NODE and RB_CLEAR_NODE macros. Also, we can get rid of the rb_init_node function which had been introduced by commit 88d19cf3 ("timers: Add rb_init_node() to allow for stack allocated rb nodes") to avoid some issue with the empty node's color not being initialized. I'm not sure what the RB_EMPTY_NODE checks in rb_prev() / rb_next() are doing there, though. axboe introduced them in commit 10fd48f2 ("rbtree: fixed reversed RB_EMPTY_NODE and rb_next/prev"). The way I see it, the 'empty node' abstraction is only used by rbtree users to flag nodes that they haven't inserted in any rbtree, so asking the predecessor or successor of such nodes doesn't make any sense. One final rb_init_node() caller was recently added in sysctl code to implement faster sysctl name lookups. This code doesn't make use of RB_EMPTY_NODE at all, and from what I could see it only called rb_init_node() under the mistaken assumption that such initialization was required before node insertion. [sfr@canb.auug.org.au: fix net/ceph/osd_client.c build] Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Michel Lespinasse authored
I recently started looking at the rbtree code (with an eye towards improving the augmented rbtree support, but I haven't gotten there yet). I noticed a lot of possible speed improvements, which I am now proposing in this patch set. Patches 1-4 are preparatory: remove internal functions from rbtree.h so that users won't be tempted to use them instead of the documented APIs, clean up some incorrect usages I've noticed (in particular, with the recently added fs/proc/proc_sysctl.c rbtree usage), reference the documentation so that people have one less excuse to miss it, etc. Patch 5 is a small module I wrote to check the rbtree performance. It creates 100 nodes with random keys and repeatedly inserts and erases them from an rbtree. Additionally, it has code to check for rbtree invariants after each insert or erase operation. Patches 6-12 is where the rbtree optimizations are done, and they touch only that one file, lib/rbtree.c . I am getting good results out of these - in my small benchmark doing rbtree insertion (including search) and erase, I'm seeing a 30% runtime reduction on Sandybridge E5, which is more than I initially thought would be possible. (the results aren't as impressive on my two other test hosts though, AMD barcelona and Intel Westmere, where I am seeing 14% runtime reduction only). The code size - both source (ommiting comments) and compiled - is also shorter after these changes. However, I do admit that the updated code is more arduous to read - one big reason for that is the removal of the tree rotation helpers, which added some overhead but also made it easier to reason about things locally. Overall, I believe this is an acceptable compromise, given that this code doesn't get modified very often, and that I have good tests for it. Upon Peter's suggestion, I added comments showing the rtree configuration before every rotation. I think they help; however it's still best to have a copy of the cormen/leiserson/rivest book when digging into this code. This patch: reference Documentation/rbtree.txt for usage instructions include/linux/rbtree.h included some basic usage instructions, while Documentation/rbtree.txt had some more complete and easier to follow instructions. Replacing the former with a reference to the latter. Signed-off-by:
-
Michel Lespinasse authored
Commit d6629859 ("ipc/mqueue: improve performance of send/recv") and ce2d52cc ("ipc/mqueue: add rbtree node caching support") introduced an rbtree of message priorities, and usage of rb_init_node() to initialize the corresponding nodes. As it turns out, rb_init_node() is unnecessary here, as the nodes are fully initialized on insertion by rb_link_node() and the code doesn't access nodes that aren't inserted on the rbtree. Removing the rb_init_node() calls as I removed that function during rbtree API cleanups (the only other use of it was in a place that similarly didn't require it). Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Gerald Schaefer authored
This implements the architecture backend for transparent hugepages on s390. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Gerald Schaefer authored
This patch is part of the architecture backend for thp on s390. It disables thp for kvm hosts, because there is no kvm host hugepage support so far. Existing thp mappings are split by follow_page() with FOLL_SPLIT, and future thp mappings are prevented by setting VM_NOHUGEPAGE in mm->def_flags. Signed-off-by:
-
Gerald Schaefer authored
This patch is part of the architecture backend for thp on s390. It provides the pagetable pre-allocation functions pgtable_trans_huge_deposit() and pgtable_trans_huge_withdraw(). Unlike other archs, s390 has no struct page * as pgtable_t, but rather a pointer to the page table. So instead of saving the pagetable pre- allocation list info inside the struct page, it is being saved within the pagetable itself. Signed-off-by:
-
Gerald Schaefer authored
This patch is part of the architecture backend for thp on s390. It provides the functions related to thp splitting, including serialization against gup. Unlike other archs, pmdp_splitting_flush() cannot use a tlb flushing operation to serialize against gup on s390, because that wouldn't be stopped by the disabled IRQs. So instead, smp_call_function() is called with an empty function, which will have the expected effect. Signed-off-by:
-
Gerald Schaefer authored
This adds a check to hugepage_madvise(), to refuse MADV_HUGEPAGE if VM_NOHUGEPAGE is set in mm->def_flags. On s390, the VM_NOHUGEPAGE flag will be set in mm->def_flags for kvm processes, to prevent any future thp mappings. In order to also prevent MADV_HUGEPAGE on such an mm, hugepage_madvise() should check mm->def_flags. Signed-off-by:
-
Gerald Schaefer authored
On s390, a valid page table entry must not be changed while it is attached to any CPU. So instead of pmd_mknotpresent() and set_pmd_at(), an IDTE operation would be necessary there. This patch introduces the pmdp_invalidate() function, to allow architecture-specific implementations. Signed-off-by:
-
