Add recovery configuration to the sysfs interface. This will
allow usage of this configuration feature in production
devices where access to debugfs might be limited.
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/1601662144-5964-4-git-send-email-rishabhb@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add coredump as part of the sysfs interface. This will
allow usage of this configuration feature in production
devices where access to debugfs might be limited.
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/1601662144-5964-3-git-send-email-rishabhb@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Currently "default" configuration option means coredumps are
enabled. To avoid confusion rename the "default" configuration
option to "enabled" and disable collection of dumps by default
as doing so makes sense for production devices.
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/1601662144-5964-2-git-send-email-rishabhb@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The K3 SoCs has various internal on-chip SRAM memories like the SRAM
within the MCU domain or the shared MSMC RAM within NavSS that can be
used for multiple purposes. One such purpose is to have the R5F cores
use a portion of such on-chip SRAM for fast-access data or to directly
execute code.

Add support to the K3 R5 remoteproc driver to parse and support
loading into such memories. The SRAM regions need to be mapped as
normal non-cacheable memory to avoid kernel crashes when the remoteproc
loader code uses the Arm64 memset library function (the "DC ZVA"
instruction throws a alignment fault on device type memory).

These SRAM regions are completely optional as not all firmware images
require these memories, and any such memory has to be reserved as such
in the DTS files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201002234234.20704-5-s-anna@ti.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The R5F processors on K3 SoCs all have two TCMs (ATCM and BTCM) that
support 32-bit ECC. The TCMs are typically loaded with some boot-up
code to initialize the R5 MPUs to further execute code out of DDR.
The ECC for the TCMs is enabled by default on K3 SoCs due to internal
default tie-off values, but the TCM memories are not initialized on
device power up. Any read access without the corresponding TCM memory
location initialized will generate an ECC error, and any such access
from a A72 or A53 core will trigger a SError.

So, zero initialize both the TCM memories before loading any firmware
onto a R5F in remoteproc mode. Any R5F booted from U-Boot/SPL would
require a similar initialization in the bootloader. Note that both
the TCMs are initialized unconditionally as the TCM enable config bits
only manage the access and visibility from R5.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201002234234.20704-4-s-anna@ti.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The TI K3 family of SoCs typically have one or more dual-core Arm Cortex
R5F processor clusters/subsystems (R5FSS). This R5F subsystem/cluster
can be configured at boot time to be either run in a LockStep mode or in
an Asymmetric Multi Processing (AMP) fashion in Split-mode. This subsystem
has 64 KB each Tightly-Coupled Memory (TCM) internal memories for each
core split between two banks - TCMA and TCMB (further interleaved into
two banks). The subsystem does not have an MMU, but has a Region Address
Translater (RAT) module that is accessible only from the R5Fs for providing
translations between 32-bit CPU addresses into larger system bus addresses.

Add a remoteproc driver to support this subsystem to be able to load and
boot the R5F cores primarily in LockStep mode. The code also includes the
base support for Split mode. Error Recovery and Power Management features
are not currently supported. Loading support includes the internal TCMs
and DDR. RAT support is left for a future patch, and as such the reserved
memory carveout regions are all expected to be using memory regions within
the first 2 GB.

The R5F remote processors do not have an MMU, and so require fixed memory
carveout regions matching the firmware image addresses. Support for this
is provided by mandating multiple memory regions to be attached to the
remoteproc device. The first memory region will be used to serve as the
DMA pool for all dynamic allocations like the vrings and vring buffers.
The remaining memory regions are mapped into the kernel at device probe
time, and are used to provide address translations for firmware image
segments without the need for any RSC_CARVEOUT entries. Any firmware
image using memory outside of the supplied reserved memory carveout
regions will be errored out.

The R5F processors on TI K3 SoCs require a specific sequence for booting
and shutting down the processors. This sequence is also dependent on the
mode (LockStep or Split) the R5F cluster is configured for. The R5F cores
have a Memory Protection Unit (MPU) that has a default configuration that
does not allow the cores to run out of DDR out of reset. This is resolved
by using the TCMs for boot-strapping code that applies the appropriate
executable permissions on desired DDR memory. The loading into the TCMs
requires that the resets be released first with the cores in halted state.
The Power Sleep Controller (PSC) module on K3 SoCs requires that the cores
be in WFI/WFE states with no active bus transactions before the cores can
be put back into reset. Support for this is provided by using the newly
introduced .prepare() and .unprepare() ops in the remoteproc core. The
.prepare() ops is invoked before any loading, and the .unprepare() ops
is invoked after the remoteproc resource cleanup. The R5F core resets
are deasserted in .prepare() and asserted in .unprepare(), and the cores
themselves are started and halted in .start() and .stop() ops. This
ensures symmetric usage and allows the R5F cores state machine to be
maintained properly between using the sysfs 'state' variable, bind/unbind
and regular module load/unload flows.

The subsystem is represented as a single remoteproc in LockStep mode, and
as two remoteprocs in Split mode. The driver uses various TI-SCI interfaces
to talk to the System Controller (DMSC) for managing configuration, power
and reset management of these cores. IPC between the A53 cores and the R5
cores is supported through the virtio rpmsg stack using shared memory and
OMAP Mailboxes.

The AM65x SoCs typically have a single R5FSS in the MCU voltage domain. The
J721E SoCs uses a slightly revised IP and typically have three R5FSSs, with
one cluster present within the MCU voltage domain (MCU_R5FSS0), and the
remaining two clusters present in the MAIN voltage domain (MAIN_R5FSS0 and
MAIN_R5FSS1). The integration of these clusters on J721E SoC is also
slightly different in that these IPs do support an actual local reset line,
while they are a no-op on AM65x SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201002234234.20704-3-s-anna@ti.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The Texas Instruments K3 family of SoCs have one or more dual-core
Arm Cortex R5F processor subsystems/clusters (R5FSS). The clusters
can be split between multiple voltage domains as well. Add the device
tree bindings document for these R5F subsystem devices. These R5F
processors do not have an MMU, and so require fixed memory carveout
regions matching the firmware image addresses. The nodes require more
than one memory region, with the first memory region used for DMA
allocations at runtime. The remaining memory regions are reserved
and are used for the loading and running of the R5F remote processors.
The R5F processors can also optionally use any internal on-chip SRAM
memories either for executing code or using it as fast-access data.

The added example illustrates the DT nodes for the single R5FSS device
present on K3 AM65x family of SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20201002234234.20704-2-s-anna@ti.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add support for mt8192 SCP.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200921094847.2112399-1-pihsun@chromium.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Fix the discrepancy observed between accepted input and read back value
while disabling remoteproc coredump through the coredump debugfs entry.

Fixes: 3afdc59e ("remoteproc: Add coredump debugfs entry")
Cc: stable@vger.kernel.org
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200916145100.15872-1-sibis@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

On secure devices which support warm reset, the MBA firmware requires
access to the modem region to clear them out. Hence provide Q6 access
to this region before MBA boot. This will be a nop during a modem SSR.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200917175840.18708-1-sibis@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Currently when pointer scp is null a dev_err is being called that
references the pointer which is the very thing we are trying to
avoid doing. Remove the extraneous error message to avoid this
issue.

Addresses-Coverity: ("Dereference after null check")
Fixes: 63c13d61 ("remoteproc/mediatek: add SCP support for mt8183")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200918152428.27258-1-colin.king@canonical.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Fix the assignment of the @state pointer - it is obviously wrong.
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Fixes: 376ffdc0 ("remoteproc: stm32: Properly set co-processor state when attaching")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200831213758.206690-1-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This will improve this driver's build coverage.
Reported-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Link: https://lore.kernel.org/r/20200915012911.489820-1-acourbot@chromium.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Pull io_uring fixes from Jens Axboe:
 "A few differerent things in here.

  Seems like syzbot got some more io_uring bits wired up, and we got a
  handful of reports and the associated fixes are in here.

  General fixes too, and a lot of them marked for stable.

  Lastly, a bit of fallout from the async buffered reads, where we now
  more easily trigger short reads. Some applications don't really like
  that, so the io_read() code now handles short reads internally, and
  got a cleanup along the way so that it's now easier to read (and
  documented). We're now passing tests that failed before"

* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
  io_uring: short circuit -EAGAIN for blocking read attempt
  io_uring: sanitize double poll handling
  io_uring: internally retry short reads
  io_uring: retain iov_iter state over io_read/io_write calls
  task_work: only grab task signal lock when needed
  io_uring: enable lookup of links holding inflight files
  io_uring: fail poll arm on queue proc failure
  io_uring: hold 'ctx' reference around task_work queue + execute
  fs: RWF_NOWAIT should imply IOCB_NOIO
  io_uring: defer file table grabbing request cleanup for locked requests
  io_uring: add missing REQ_F_COMP_LOCKED for nested requests
  io_uring: fix recursive completion locking on oveflow flush
  io_uring: use TWA_SIGNAL for task_work uncondtionally
  io_uring: account locked memory before potential error case
  io_uring: set ctx sq/cq entry count earlier
  io_uring: Fix NULL pointer dereference in loop_rw_iter()
  io_uring: add comments on how the async buffered read retry works
  io_uring: io_async_buf_func() need not test page bit

Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one()
and pmd_free_one()") converted parisc to use generic version of
pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for
PMD.

Restore the original version of pmd_alloc_one() for parisc, just use
GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and
memset.

Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:
 "A few fixes on the block side of things:

   - Discard granularity fix (Coly)

   - rnbd cleanups (Guoqing)

   - md error handling fix (Dan)

   - md sysfs fix (Junxiao)

   - Fix flush request accounting, which caused an IO slowdown for some
     configurations (Ming)

   - Properly propagate loop flag for partition scanning (Lennart)"

* tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block:
  block: fix double account of flush request's driver tag
  loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
  rnbd: no need to set bi_end_io in rnbd_bio_map_kern
  rnbd: remove rnbd_dev_submit_io
  md-cluster: Fix potential error pointer dereference in resize_bitmaps()
  block: check queue's limits.discard_granularity in __blkdev_issue_discard()
  md: get sysfs entry after redundancy attr group create

Pull RISC-V fix from Palmer Dabbelt:
 "I collected a single fix during the merge window: we managed to break
  the early trap setup on !MMU, this fixes it"

* tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Setup exception vector for nommu platform

Pull arch/sh updates from Rich Felker:
 "Cleanup, SECCOMP_FILTER support, message printing fixes, and other
  changes to arch/sh"

* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
  sh: landisk: Add missing initialization of sh_io_port_base
  sh: bring syscall_set_return_value in line with other architectures
  sh: Add SECCOMP_FILTER
  sh: Rearrange blocks in entry-common.S
  sh: switch to copy_thread_tls()
  sh: use the generic dma coherent remap allocator
  sh: don't allow non-coherent DMA for NOMMU
  dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
  sh: unexport register_trapped_io and match_trapped_io_handler
  sh: don't include <asm/io_trapped.h> in <asm/io.h>
  sh: move the ioremap implementation out of line
  sh: move ioremap_fixed details out of <asm/io.h>
  sh: remove __KERNEL__ ifdefs from non-UAPI headers
  sh: sort the selects for SUPERH alphabetically
  sh: remove -Werror from Makefiles
  sh: Replace HTTP links with HTTPS ones
  arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
  sh: stacktrace: Remove stacktrace_ops.stack()
  sh: machvec: Modernize printing of kernel messages
  sh: pci: Modernize printing of kernel messages
  ...

One case was missed in the short IO retry handling, and that's hitting
-EAGAIN on a blocking attempt read (eg from io-wq context). This is a
problem on sockets that are marked as non-blocking when created, they
don't carry any REQ_F_NOWAIT information to help us terminate them
instead of perpetually retrying.

Fixes: 227c0c96 ("io_uring: internally retry short reads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There's a bit of confusion on the matching pairs of poll vs double poll,
depending on if the request is a pure poll (IORING_OP_POLL_ADD) or
poll driven retry.

Add io_poll_get_double() that returns the double poll waitqueue, if any,
and io_poll_get_single() that returns the original poll waitqueue. With
that, remove the argument to io_poll_remove_double().

Finally ensure that wait->private is cleared once the double poll handler
has run, so that remove knows it's already been seen.

Cc: stable@vger.kernel.org # v5.8
Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com
Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull more perf tools updates from Arnaldo Carvalho de Melo:
 "Fixes:
   - Fixes for 'perf bench numa'.

   - Always memset source before memcpy in 'perf bench mem'.

   - Quote CC and CXX for their arguments to fix build in environments
     using those variables to pass more than just the compiler names.

   - Fix module symbol processing, addressing regression detected via
     "perf test".

   - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf
     test' entry.

  Improvements:
   - Add script to autogenerate socket family name id->string table from
     copy of kernel header, used so far in 'perf trace'.

   - 'perf ftrace' improvements to provide similar options for this
     utility so that one can go from 'perf record', 'perf trace', etc to
     'perf ftrace' just by changing the name of the subcommand.

   - Prefer new "sched:sched_waking" trace event when it exists in 'perf
     sched' post processing.

   - Update POWER9 metrics to utilize other metrics.

   - Fall back to querying debuginfod if debuginfo not found locally.

  Miscellaneous:
   - Sync various kvm headers with kernel sources"

* tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits)
  perf ftrace: Make option description initials all capital letters
  perf build-ids: Fall back to debuginfod query if debuginfo not found
  perf bench numa: Remove dead code in parse_nodes_opt()
  perf stat: Update POWER9 metrics to utilize other metrics
  perf ftrace: Add change log
  perf: ftrace: Add set_tracing_options() to set all trace options
  perf ftrace: Add option --tid to filter by thread id
  perf ftrace: Add option -D/--delay to delay tracing
  perf: ftrace: Allow set graph depth by '--graph-opts'
  perf ftrace: Add support for trace option tracing_thresh
  perf ftrace: Add option 'verbose' to show more info for graph tracer
  perf ftrace: Add support for tracing option 'irq-info'
  perf ftrace: Add support for trace option funcgraph-irqs
  perf ftrace: Add support for trace option sleep-time
  perf ftrace: Add support for tracing option 'func_stack_trace'
  perf tools: Add general function to parse sublevel options
  perf ftrace: Add option '--inherit' to trace children processes
  perf ftrace: Show trace column header
  perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size
  perf ftrace: Factor out function write_tracing_file_int()
  ...

Pull x86 fixes from Ingo Molnar:
 "Misc fixes and small updates all around the place:

   - Fix mitigation state sysfs output

   - Fix an FPU xstate/sxave code assumption bug triggered by
     Architectural LBR support

   - Fix Lightning Mountain SoC TSC frequency enumeration bug

   - Fix kexec debug output

   - Fix kexec memory range assumption bug

   - Fix a boundary condition in the crash kernel code

   - Optimize porgatory.ro generation a bit

   - Enable ACRN guests to use X2APIC mode

   - Reduce a __text_poke() IRQs-off critical section for the benefit of
     PREEMPT_RT"

* tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Acquire pte lock with interrupts enabled
  x86/bugs/multihit: Fix mitigation reporting when VMX is not in use
  x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs
  x86/purgatory: Don't generate debug info for purgatory.ro
  x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC
  kexec_file: Correctly output debugging information for the PT_LOAD ELF header
  kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges
  x86/crash: Correct the address boundary of function parameters
  x86/acrn: Remove redundant chars from ACRN signature
  x86/acrn: Allow ACRN guest to use X2APIC mode

Pull scheduler fixes from Ingo Molnar:
 "Two fixes: fix a new tracepoint's output value, and fix the formatting
  of show-state syslog printouts"

* tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Fix the alignment of the show-state debug output
  sched: Fix use of count for nr_running tracepoint

Pull perf fixes from Ingo Molnar:
 "Misc fixes, an expansion of perf syscall access to CAP_PERFMON
  privileged tools, plus a RAPL HW-enablement for Intel SPR platforms"

* tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/rapl: Add support for Intel SPR platform
  perf/x86/rapl: Support multiple RAPL unit quirks
  perf/x86/rapl: Fix missing psys sysfs attributes
  hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration
  kprobes: Remove show_registers() function prototype
  perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability

Pull locking fixlets from Ingo Molnar:
 "A documentation fix and a 'fallthrough' macro update"

* tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Convert to use the preferred 'fallthrough' macro
  Documentation/locking/locktypes: Fix a typo

Pull 9p updates from Dominique Martinet:

 - some code cleanup

 - a couple of static analysis fixes

 - setattr: try to pick a fid associated with the file rather than the
   dentry, which might sometimes matter

* tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux:
  9p: Remove unneeded cast from memory allocation
  9p: remove unused code in 9p
  net/9p: Fix sparse endian warning in trans_fd.c
  9p: Fix memory leak in v9fs_mount
  9p: retrieve fid from file when file instance exist.

Pull cifs fixes from Steve French:
 "Three small cifs/smb3 fixes, one for stable fixing mkdir path with
  the 'idsfromsid' mount option"

* tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  SMB3: Fix mkdir when idsfromsid configured on mount
  cifs: Convert to use the fallthrough macro
  cifs: Fix an error pointer dereference in cifs_mount()

Pull NFS client updates from Trond Myklebust:
 "Stable fixes:
   - pNFS: Don't return layout segments that are being used for I/O
   - pNFS: Don't move layout segments off the active list when being used for I/O

  Features:
   - NFS: Add support for user xattrs through the NFSv4.2 protocol
   - NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC
   - NFSv4.0 allow nconnect for v4.0

  Bugfixes and cleanups:
   - nfs: ensure correct writeback errors are returned on close()
   - nfs: nfs_file_write() should check for writeback errors
   - nfs: Fix getxattr kernel panic and memory overflow
   - NFS: Fix the pNFS/flexfiles mirrored read failover code
   - SUNRPC: dont update timeout value on connection reset
   - freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
   - sunrpc: destroy rpc_inode_cachep after unregister_filesystem"

* tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits)
  NFS: Fix flexfiles read failover
  fs: nfs: delete repeated words in comments
  rpc_pipefs: convert comma to semicolon
  nfs: Fix getxattr kernel panic and memory overflow
  NFS: Don't return layout segments that are in use
  NFS: Don't move layouts to plh_return_segs list while in use
  NFS: Add layout segment info to pnfs read/write/commit tracepoints
  NFS: Add tracepoints for layouterror and layoutstats.
  NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close()
  SUNRPC dont update timeout value on connection reset
  nfs: nfs_file_write() should check for writeback errors
  nfs: ensure correct writeback errors are returned on close()
  NFSv4.2: xattr cache: get rid of cache discard work queue
  NFS: remove redundant initialization of variable result
  NFSv4.0 allow nconnect for v4.0
  freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
  sunrpc: destroy rpc_inode_cachep after unregister_filesystem
  NFSv4.2: add client side xattr caching.
  NFSv4.2: hook in the user extended attribute handlers
  NFSv4.2: add the extended attribute proc functions.
  ...

Pull edac fix from Tony Luck:
 "Fix for the ie31200 driver that missed the first pull"

* tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/ie31200: Fallback if host bridge device is already initialized

Pull devicetree fixes from Rob Herring:
 "Another round of 'allOf' removals and whitespace clean-ups of schemas"

* tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Remove more cases of 'allOf' containing a '$ref'
  dt-bindings: Whitespace clean-ups in schema files

Pull more ACPI updates from Rafael Wysocki:
 "Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk
  driver and the Designware i2c driver (changes from Akshu Agrawal and
  Pu Wen)"

* tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  clk: x86: Support RV architecture
  ACPI: APD: Add a fmw property is_raven
  clk: x86: Change name from ST to FCH
  ACPI: APD: Change name from ST to FCH
  i2c: designware: Add device HID for Hygon I2C controller

Pull one more power management update from Rafael Wysocki:
 "Modify the intel_pstate driver to allow it to work in the passive mode
  with hardware-managed P-states (HWP) enabled"

* tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Implement passive mode with HWP enabled

Pull MFD updates from Lee Jones:
 "Core Frameworks
   - Make better attempt at matching device with the correct OF node
   - Allow batch removal of hierarchical sub-devices

  New Drivers
   - Add STM32 Clocksource driver
   - Add support for Khadas System Control Microcontroller

  Driver Removal
   - Remove unused driver for TI's SMSC ECE1099

  New Device Support
   - Add support for Intel Emmitsburg PCH to Intel LPSS PCI
   - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
   - Add support for Dialog DA revision to Dialog DA9063

  New Functionality
   - Add support for AXP803 to be probed by I2C

  Fix-ups
   - Numerous W=1 warning fixes
   - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
   - Enabled Regmap 'fast I/O' in stm32-lptimer
   - Change BUG_ON to WARN_ON in arizona-core
   - Remove superfluous code/initialisation (madera, max14577)
   - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
   - Switch to of_platform_populate() in sprd-sc27xx-spi
   - Expand out set/get brightness/pwm macros in lm3533-ctrlbank
   - Disable IRQs on suspend in motorola-cpcap
   - Clean-up error handling in intel_soc_pmic_mrfld
   - Ensure correct removal order of sub-devices in madera
   - Many s/HTTP/HTTPS/ link changes
   - Ensure name used with Regmap is unique in syscon

  Bug Fixes
   - Properly 'put' clock on unbind and error in arizona-core
   - Fix revision handling in da9063
   - Fix 'assignment of read-only location' error in kempld-core
   - Avoid using the Regmap API when atomic in rn5t618
   - Redefine volatile register description in rn5t618
   - Use locking to protect event handler in dln2"

* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
  mfd: syscon: Use a unique name with regmap_config
  mfd: Replace HTTP links with HTTPS ones
  mfd: dln2: Run event handler loop under spinlock
  mfd: madera: Improve handling of regulator unbinding
  mfd: mfd-core: Add mechanism for removal of a subset of children
  mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
  mfd: max14577: Remove redundant initialization of variable current_bits
  mfd: rn5t618: Fix caching of battery related registers
  mfd: max77693-private: Drop a duplicated word
  mfd: da9055: pdata.h: Drop a duplicated word
  mfd: rn5t618: Make restart handler atomic safe
  mfd: kempld-core: Fix 'assignment of read-only location' error
  mfd: axp20x: Allow the AXP803 to be probed by I2C
  mfd: da9063: Add support for latest DA silicon revision
  mfd: da9063: Fix revision handling to correctly select reg tables
  dt-bindings: mfd: st,stmfx: Remove I2C unit name
  dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
  mfd: motorola-cpcap: Disable interrupt for suspend
  mfd: smsc-ece1099: Remove driver
  mfd: core: Add OF_MFD_CELL_REG() helper
  ...

Merge more updates from Andrew Morton:
 "Subsystems affected by this patch series: mm/hotfixes, lz4, exec,
  mailmap, mm/thp, autofs, sysctl, mm/kmemleak, mm/misc and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
  virtio: pci: constify ioreadX() iomem argument (as in generic implementation)
  ntb: intel: constify ioreadX() iomem argument (as in generic implementation)
  rtl818x: constify ioreadX() iomem argument (as in generic implementation)
  iomap: constify ioreadX() iomem argument (as in generic implementation)
  sh: use generic strncpy()
  sh: clkfwk: remove r8/r16/r32
  include/asm-generic/vmlinux.lds.h: align ro_after_init
  mm: annotate a data race in page_zonenum()
  mm/swap.c: annotate data races for lru_rotate_pvecs
  mm/rmap: annotate a data race at tlb_flush_batched
  mm/mempool: fix a data race in mempool_free()
  mm/list_lru: fix a data race in list_lru_count_one
  mm/memcontrol: fix a data race in scan count
  mm/page_counter: fix various data races at memsw
  mm/swapfile: fix and annotate various data races
  mm/filemap.c: fix a data race in filemap_fault()
  mm/swap_state: mark various intentional data races
  mm/page_io: mark various intentional data races
  mm/frontswap: mark various intentional data races
  mm/kmemleak: silence KCSAN splats in checksum
  ...

The ioreadX() helpers have inconsistent interface.  On some architectures
void *__iomem address argument is a pointer to const, on some not.

Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200709072837.5869-5-krzk@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ioreadX() helpers have inconsistent interface.  On some architectures
void *__iomem address argument is a pointer to const, on some not.

Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200709072837.5869-4-krzk@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ioreadX() helpers have inconsistent interface.  On some architectures
void *__iomem address argument is a pointer to const, on some not.

Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200709072837.5869-3-krzk@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "iomap: Constify ioreadX() iomem argument", v3.

The ioread8/16/32() and others have inconsistent interface among the
architectures: some taking address as const, some not.

It seems there is nothing really stopping all of them to take pointer to
const.

This patch (of 4):

The ioreadX() and ioreadX_rep() helpers have inconsistent interface.  On
some architectures void *__iomem address argument is a pointer to const,
on some not.

Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.

[krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()]
  Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org
[akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c]
  Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.comSuggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org
Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Current SH will get below warning at strncpy()

In file included from ${LINUX}/arch/sh/include/asm/string.h:3,
                 from ${LINUX}/include/linux/string.h:20,
                 from ${LINUX}/include/linux/bitmap.h:9,
                 from ${LINUX}/include/linux/nodemask.h:95,
                 from ${LINUX}/include/linux/mmzone.h:17,
                 from ${LINUX}/include/linux/gfp.h:6,
                 from ${LINUX}/innclude/linux/slab.h:15,
                 from ${LINUX}/linux/drivers/mmc/host/vub300.c:38:
${LINUX}/drivers/mmc/host/vub300.c: In function 'new_system_port_status':
${LINUX}/arch/sh/include/asm/string_32.h:51:42: warning: array subscript\
  80 is above array bounds of 'char[26]' [-Warray-bounds]
   : "0" (__dest), "1" (__src), "r" (__src+__n)
                                     ~~~~~^~~~

In general, strncpy() should behave like below.

	char dest[10];
	char *src = "12345";

	strncpy(dest, src, 10);
	// dest = {'1', '2', '3', '4', '5',
	           '\0','\0','\0','\0','\0'}

But, current SH strnpy() has 2 issues.
1st is it will access to out-of-memory (= src + 10).
2nd is it needs big fixup for it, and maintenance __asm__
code is difficult.

To solve these issues, this patch simply uses generic strncpy()
instead of architecture specific one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Modra <amodra@gmail.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://marc.info/?l=linux-renesas-soc&m=157664657013309Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>