- 12 Aug, 2020 40 commits
-
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Fix PERF_COUNT_SW_PAGE_FAULTS perf event manually for page fault retries, by moving it before taking mmap_sem. Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Vineet Gupta <vgupta@synopsys.com> Link: http://lkml.kernel.org/r/20200707225021.200906-4-peterx@redhat.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). Add the missing PERF_COUNT_SW_PAGE_FAULTS perf events too. Note, the other two perf events (PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]) were done in handle_mm_fault(). Signed-off-by:
-
Peter Xu authored
Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b982 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by:
-
Joonsoo Kim authored
There is a well-defined migration target allocation callback. Use it. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Roman Gushchin <guro@fb.com> Link: http://lkml.kernel.org/r/1596180906-8442-3-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by:
-
Joonsoo Kim authored
new_non_cma_page() in gup.c requires to allocate the new page that is not on the CMA area. new_non_cma_page() implements it by using allocation scope APIs. However, there is a work-around for hugetlb. Normal hugetlb page allocation API for migration is alloc_huge_page_nodemask(). It consists of two steps. First is dequeing from the pool. Second is, if there is no available page on the queue, allocating by using the page allocator. new_non_cma_page() can't use this API since first step (deque) isn't aware of scope API to exclude CMA area. So, new_non_cma_page() exports hugetlb internal function for the second step, alloc_migrate_huge_page(), to global scope and uses it directly. This is suboptimal since hugetlb pages on the queue cannot be utilized. This patch tries to fix this situation by making the deque function on hugetlb CMA aware. In the deque function, CMA memory is skipped if PF_MEMALLOC_NOCMA flag is found. Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
-
Joonsoo Kim authored
We have well defined scope API to exclude CMA region. Use it rather than manipulating gfp_mask manually. With this change, we can now restore __GFP_MOVABLE for gfp_mask like as usual migration target allocation. It would result in that the ZONE_MOVABLE is also searched by page allocator. For hugetlb, gfp_mask is redefined since it has a regular allocation mask filter for migration target. __GPF_NOWARN is added to hugetlb gfp_mask filter since a new user for gfp_mask filter, gup, want to be silent when allocation fails. Note that this can be considered as a fix for the commit 9a4e9f3b ("mm: update get_user_pages_longterm to migrate pages allocated from CMA region"). However, "Fixes" tag isn't added here since it is just suboptimal but it doesn't cause any problem. Suggested-by:
-
Joonsoo Kim authored
There is a well-defined standard migration target callback. Use it directly. Signed-off-by:
-
Joonsoo Kim authored
There is a well-defined migration target allocation callback. Use it. Signed-off-by:
-
Joonsoo Kim authored
There are some similar functions for migration target allocation. Since there is no fundamental difference, it's better to keep just one rather than keeping all variants. This patch implements base migration target allocation function. In the following patches, variants will be converted to use this function. Changes should be mechanical, but, unfortunately, there are some differences. First, some callers' nodemask is assgined to NULL since NULL nodemask will be considered as all available nodes, that is, &node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if user provided gfp_mask has it. This is because future caller of this function requires to set this node constaint. Lastly, if provided nodeid is NUMA_NO_NODE, nodeid is set up to the node where migration source lives. It helps to remove simple wrappers for setting up the nodeid. Note that PageHighmem() call in previous function is changed to open-code "is_highmem_idx()" since it provides more readability. [akpm@linux-foundation.org: tweak patch title, per Vlastimil] [akpm@linux-foundation.org: fix typo in comment] Signed-off-by:
-
Joonsoo Kim authored
mm/migrate: clear __GFP_RECLAIM to make the migration callback consistent with regular THP allocations new_page_nodemask is a migration callback and it tries to use a common gfp flags for the target page allocation whether it is a base page or a THP. The later only adds GFP_TRANSHUGE to the given mask. This results in the allocation being slightly more aggressive than necessary because the resulting gfp mask will contain also __GFP_RECLAIM_KSWAPD. THP allocations usually exclude this flag to reduce over eager background reclaim during a high THP allocation load which has been seen during large mmaps initialization. There is no indication that this is a problem for migration as well but theoretically the same might happen when migrating large mappings to a different node. Make the migration callback consistent with regular THP allocations. [akpm@linux-foundation.org: fix comment typo, per Vlastimil] Signed-off-by:
-
Joonsoo Kim authored
There is no difference between two migration callback functions, alloc_huge_page_node() and alloc_huge_page_nodemask(), except __GFP_THISNODE handling. It's redundant to have two almost similar functions in order to handle this flag. So, this patch tries to remove one by introducing a new argument, gfp_mask, to alloc_huge_page_nodemask(). After introducing gfp_mask argument, it's caller's job to provide correct gfp_mask. So, every callsites for alloc_huge_page_nodemask() are changed to provide gfp_mask. Note that it's safe to remove a node id check in alloc_huge_page_node() since there is no caller passing NUMA_NO_NODE as a node id. Signed-off-by:
-
Joonsoo Kim authored
It's not performance sensitive function. Move it to .c. This is a preparation step for future change. Signed-off-by:
-
Joonsoo Kim authored
Patch series "clean-up the migration target allocation functions", v5. This patch (of 9): For locality, it's better to migrate the page to the same node rather than the node of the current caller's cpu. Signed-off-by:
Roman Gushchin <guro@fb.com> Acked-by:
-
Liao Pingfang authored
Remove the superfuous break, as there is a 'return' before it. Signed-off-by:
Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Signed-off-by:
-
Alexey Dobriyan authored
Two functions are only called via function pointers, don't bother inlining them. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Nick Desaulniers authored
Fixes the observed warnings: scripts/gdb/linux/rbtree.py:20: SyntaxWarning: "is" with a literal. Did you mean "=="? if node is 0: scripts/gdb/linux/rbtree.py:36: SyntaxWarning: "is" with a literal. Did you mean "=="? if node is 0: It looks like this is a new warning added in Python 3.8. I've only seen this once after adding the add-auto-load-safe-path rule to my ~/.gdbinit for a new tree. Fixes: commit 449ca0c9 ("scripts/gdb: add rb tree iterating utilities") Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Aymeric Agon-Rambosson <aymeric.agon@yandex.com> Link: http://lkml.kernel.org/r/20200805225015.2847624-1-ndesaulniers@google.com Link: https://adamj.eu/tech/2020/01/21/why-does-python-3-8-syntaxwarning-for-is-literal/Signed-off-by:
-
Wei Yongjun authored
Fix sparse build warnings: kernel/kcov.c:99:1: warning: symbol '__pcpu_scope_kcov_percpu_data' was not declared. Should it be static? kernel/kcov.c:778:6: warning: symbol 'kcov_remote_softirq_start' was not declared. Should it be static? kernel/kcov.c:795:6: warning: symbol 'kcov_remote_softirq_stop' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Link: http://lkml.kernel.org/r/20200702115501.73077-1-weiyongjun1@huawei.comSigned-off-by:
-
Marco Elver authored
Unconditionally add -fno-stack-protector to KCOV's compiler options, as all supported compilers support the option. This saves a compiler invocation to determine if the option is supported. Because Clang does not support -fno-conserve-stack, and -fno-stack-protector was wrapped in the same cc-option, we were missing -fno-stack-protector with Clang. Unconditionally adding this option fixes this for Clang. Suggested-by:
Marco Elver <elver@google.com> Signed-off-by:
-
Yue Hu authored
Since print_oops_end_marker() is not used externally, also remove it in kernel.h at the same time. Signed-off-by:
Yue Hu <huyue2@yulong.com> Signed-off-by:
-
Tiezhu Yang authored
There exists duplicated "the" in the help text of CONFIG_PANIC_TIMEOUT, Remove it. Signed-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Xuefeng Li <lixuefeng@loongson.cn> Link: http://lkml.kernel.org/r/1591103358-32087-2-git-send-email-yangtiezhu@loongson.cnSigned-off-by:
-
Tiezhu Yang authored
The return value of oops_may_print() is true or false, so change its type to reflect that. Signed-off-by:
-
Gustavo A. R. Silva authored
Use array_size() helper instead of the open-coded version in copy_{from,to}_user(). These sorts of multiplication factors need to be wrapped in array_size(). This issue was found with the help of Coccinelle and, audited and fixed manually. Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Also, while there, use the preferred form for passing a size of a struct. The alternative form where struct name is spelled out hurts readability and introduces an opportunity for a bug when the pointer variable type is changed but the corresponding sizeof that is passed as argument is not. This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses KSPP ID: https://github.com/KSPP/linux/issues/83Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses KSPP ID: https://github.com/KSPP/linux/issues/83Signed-off-by:
-
Vijay Balakrishna authored
Make kernel GNU build-id available in VMCOREINFO. Having build-id in VMCOREINFO facilitates presenting appropriate kernel namelist image with debug information file to kernel crash dump analysis tools. Currently VMCOREINFO lacks uniquely identifiable key for crash analysis automation. Regarding if this patch is necessary or matching of linux_banner and OSRELEASE in VMCOREINFO employed by crash(8) meets the need -- IMO, build-id approach more foolproof, in most instances it is a cryptographic hash generated using internal code/ELF bits unlike kernel version string upon which linux_banner is based that is external to the code. I feel each is intended for a different purpose. Also OSRELEASE is not suitable when two different kernel builds from same version with different features enabled. Currently for most linux (and non-linux) systems build-id can be extracted using standard methods for file types such as user mode crash dumps, shared libraries, loadable kernel modules etc., This is an exception for linux kernel dump. Having build-id in VMCOREINFO brings some uniformity for automation tools. Tyler said: : I think this is a nice improvement over today's linux_banner approach for : correlating vmlinux to a kernel dump. : : The elf notes parsing in this patch lines up with what is described in in : the "Notes (Nhdr)" section of the elf(5) man page. : : BUILD_ID_MAX is sufficient to hold a sha1 build-id, which is the default : build-id type today in GNU ld(2). It is also sufficient to hold the : "fast" build-id, which is the default build-id type today in LLVM lld(2). Signed-off-by:
Vijay Balakrishna <vijayb@linux.microsoft.com> Signed-off-by:
Tyler Hicks <tyhicks@linux.microsoft.com> Acked-by:
Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Link: http://lkml.kernel.org/r/1591849672-34104-1-git-send-email-vijayb@linux.microsoft.comSigned-off-by:
-
Kees Cook authored
The path_noexec() check, like the regular file check, was happening too late, letting LSMs see impossible execve()s. Check it earlier as well in may_open() and collect the redundant fs/exec.c path_noexec() test under the same robustness comment as the S_ISREG() check. My notes on the call path, and related arguments, checks, etc: do_open_execat() struct open_flags open_exec_flags = { .open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC, .acc_mode = MAY_EXEC, ... do_filp_open(dfd, filename, open_flags) path_openat(nameidata, open_flags, flags) file = alloc_empty_file(open_flags, current_cred()); do_open(nameidata, file, open_flags) may_open(path, acc_mode, open_flag) /* new location of MAY_EXEC vs path_noexec() test */ inode_permission(inode, MAY_OPEN | acc_mode) security_inode_permission(inode, acc_mode) vfs_open(path, file) do_dentry_open(file, path->dentry->d_inode, open) security_file_open(f) open() /* old location of path_noexec() test */ Signed-off-by: -
Kees Cook authored
The execve(2)/uselib(2) syscalls have always rejected non-regular files. Recently, it was noticed that a deadlock was introduced when trying to execute pipes, as the S_ISREG() test was happening too late. This was fixed in commit 73601ea5 ("fs/open.c: allow opening only regular files during execve()"), but it was added after inode_permission() had already run, which meant LSMs could see bogus attempts to execute non-regular files. Move the test into the other inode type checks (which already look for other pathological conditions[1]). Since there is no need to use FMODE_EXEC while we still have access to "acc_mode", also switch the test to MAY_EXEC. Also include a comment with the redundant S_ISREG() checks at the end of execve(2)/uselib(2) to note that they are present to avoid any mistakes. My notes on the call path, and related arguments, checks, etc: do_open_execat() struct open_flags open_exec_flags = { .open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC, .acc_mode = MAY_EXEC, ... do_filp_open(dfd, filename, open_flags) path_openat(nameidata, open_flags, flags) file = alloc_empty_file(open_flags, current_cred()); do_open(nameidata, file, open_flags) may_open(path, acc_mode, open_flag) /* new location of MAY_EXEC vs S_ISREG() test */ inode_permission(inode, MAY_OPEN | acc_mode) security_inode_permission(inode, acc_mode) vfs_open(path, file) do_dentry_open(file, path->dentry->d_inode, open) /* old location of FMODE_EXEC vs S_ISREG() test */ security_file_open(f) open() [1] https://lore.kernel.org/lkml/202006041910.9EF0C602@keescook/Signed-off-by:
-
Kees Cook authored
Patch series "Relocate execve() sanity checks", v2. While looking at the code paths for the proposed O_MAYEXEC flag, I saw some things that looked like they should be fixed up. exec: Change uselib(2) IS_SREG() failure to EACCES This just regularizes the return code on uselib(2). exec: Move S_ISREG() check earlier This moves the S_ISREG() check even earlier than it was already. exec: Move path_noexec() check earlier This adds the path_noexec() check to the same place as the S_ISREG() check. This patch (of 3): Change uselib(2)' S_ISREG() error return to EACCES instead of EINVAL so the behavior matches execve(2), and the seemingly documented value. The "not a regular file" failure mode of execve(2) is explicitly documented[1], but it is not mentioned in uselib(2)[2] which does, however, say that open(2) and mmap(2) errors may apply. The documentation for open(2) does not include a "not a regular file" error[3], but mmap(2) does[4], and it is EACCES. [1] http://man7.org/linux/man-pages/man2/execve.2.html#ERRORS [2] http://man7.org/linux/man-pages/man2/uselib.2.html#ERRORS [3] http://man7.org/linux/man-pages/man2/open.2.html#ERRORS [4] http://man7.org/linux/man-pages/man2/mmap.2.html#ERRORSSigned-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: http://lkml.kernel.org/r/20200605160013.3954297-1-keescook@chromium.org Link: http://lkml.kernel.org/r/20200605160013.3954297-2-keescook@chromium.orgSigned-off-by:
-
Lepton Wu authored
The document reads "%e" should be "executable filename" while actually it could be changed by things like pr_ctl PR_SET_NAME. People who uses "%e" in core_pattern get surprised when they find out they get thread name instead of executable filename. This is either a bug of document or a bug of code. Since the behavior of "%e" is there for long time, it could bring another surprise for users if we "fix" the code. So we just "fix" the document. And more, for users who really need the "executable filename" in core_pattern, we introduce a new "%f" for the real executable filename. We already have "%E" for executable path in kernel, so just reuse most of its code for the new added "%f" format. Signed-off-by:
Lepton Wu <ytht.net@gmail.com> Signed-off-by:
-
Tiezhu Yang authored
Reset the member "test_fs" of the test configuration after a call of the function "kfree_const" to a null pointer so that a double memory release will not be performed. Fixes: d9c6a72d ("kmod: add test driver to stress test the module loader") Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Tiezhu Yang authored
There exists redundant "be an" in the comment, remove it. Signed-off-by:
-
Tiezhu Yang authored
Patch series "kmod/umh: a few fixes". Tiezhu Yang had sent out a patch set with a slew of kmod selftest fixes, and one patch which modified kmod to return 254 when a module was not found. This opened up pandora's box about why that was being used for and low and behold its because when UMH_WAIT_PROC is used we call a kernel_wait4() call but have never unwrapped the error code. The commit log for that fix details the rationale for the approach taken. I'd appreciate some review on that, in particular nfs folks as it seems a case was never really hit before. This patch (of 5): Use the variable NAME instead of "\000" directly in kmod_test_0001(). Signed-off-by:
-
Helge Deller authored
The kernel signalfd4() syscall returns different error codes when called either in compat or native mode. This behaviour makes correct emulation in qemu and testing programs like LTP more complicated. Fix the code to always return -in both modes- EFAULT for unaccessible user memory, and EINVAL when called with an invalid signal mask. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
OGAWA Hirofumi authored
If data clusters == 0, fat_ra_init() calls the ->ent_blocknr() for the cluster beyond ->max_clusters. This checks the limit before initialization to suppress the warning. Reported-by: syzbot+756199124937b31a9b7e@syzkaller.appspotmail.com Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `xmlns`: For each link, `http://[^# ]*(?:\w|/)`: If neither `gnu\.org/license`, nor `mozilla\.org/MPL`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Yubo Feng authored
There is no need to hold write_lock in fat_ioctl_get_attributes. write_lock may make an impact on concurrency of fat_ioctl_get_attributes. Signed-off-by:
Yubo Feng <fengyubo3@huawei.com> Signed-off-by:
-
Colin Ian King authored
The 64 bit ino is being compared to the product of two u32 values, however, the multiplication is being performed using a 32 bit multiply so there is a potential of an overflow. To be fully safe, cast uspi->s_ncg to a u64 to ensure a 64 bit multiplication occurs to avoid any chance of overflow. Fixes: f3e2a520 ("ufs: NFS support") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Joe Perches authored
Add macros for nilfs_<level>(sb, fmt, ...) and convert the uses of 'nilfs_msg(sb, KERN_<LEVEL>, ...)' to 'nilfs_<level>(sb, ...)' so nilfs2 uses a logging style more like the typical kernel logging style. Miscellanea: o Realign arguments for these uses Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by:
-
Joe Perches authored
Reduce object size a bit by removing the KERN_<LEVEL> as a separate argument and adding it to the format string. Reduce overall object size by about ~.5% (x86-64 defconfig w/ nilfs2) old: $ size -t fs/nilfs2/built-in.a | tail -1 191738 8676 44 200458 30f0a (TOTALS) new: $ size -t fs/nilfs2/built-in.a | tail -1 190971 8676 44 199691 30c0b (TOTALS) Signed-off-by:
-
Eric Biggers authored
Patch series "nilfs2 updates". This patch (of 3): unlock_new_inode() is only meant to be called after a new inode has already been inserted into the hash table. But nilfs_new_inode() can call it even before it has inserted the inode, triggering the WARNING in unlock_new_inode(). Fix this by only calling unlock_new_inode() if the inode has the I_NEW flag set, indicating that it's in the table. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
