- 08 May, 2007 40 commits
-
-
Linus Torvalds authored
* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6: via: Make sure we flush write-combining using a follow-up read. via: Try to improve command-buffer chaining. drm: remove old taskqueue remnant drm: rename badly named define and cleanup ioctl code spacing radeon: Don't mess up page flipping when a file descriptor is closed. drm/radeon: upgrade to 1.27 - make PCI GART more flexible
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: Input: move USB miscellaneous devices under drivers/input/misc Input: move USB mice under drivers/input/mouse Input: move USB gamepads under drivers/input/joystick Input: move USB touchscreens under drivers/input/touchscreen Input: move USB tablets under drivers/input/tablet Input: i8042 - fix AUX port detection with some chips Input: aaed2000_kbd - convert to use polldev library Input: drivers/usb/input - usb_buffer_free() cleanup Input: synaptics - don't complain about failed resets Input: pull input.h into uinpit.h Input: drivers/usb/input - fix sparse warnings (signedness) Input: evdev - fix some sparse warnings (signedness, shadowing) Input: drivers/joystick - fix various sparse warnings Input: force feedback - make sure effect is present before playing
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits) [POWERPC] Abolish powerpc_flash_init() [POWERPC] Early serial debug support for PPC44x [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc [POWERPC] Add device tree for Ebony [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now [POWERPC] MPIC U3/U4 MSI backend [POWERPC] MPIC MSI allocator [POWERPC] Enable MSI mappings for MPIC [POWERPC] Tell Phyp we support MSI [POWERPC] RTAS MSI implementation [POWERPC] PowerPC MSI infrastructure [POWERPC] Rip out the existing powerpc msi stubs [POWERPC] Remove use of 4level-fixup.h for ppc32 [POWERPC] Add powerpc PCI-E reset API implementation [POWERPC] Holly bootwrapper [POWERPC] Holly DTS [POWERPC] Holly defconfig [POWERPC] Add support for 750CL Holly board [POWERPC] Generalize tsi108 PCI setup [POWERPC] Generalize tsi108 PHY types ... Fixed conflict in include/asm-powerpc/kdebug.h manually Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roland McGrath authored
Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'for-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block: [PATCH] ll_rw_blk: fix missing bounce in blk_rq_map_kern() [PATCH] splice: always call into page_cache_readahead() [PATCH] splice(): fix interaction with readahead
-
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: JFS: Fix race waking up jfsIO kernel thread JFS: use __set_current_state() Copy i_flags to jfs inode flags on write JFS: document uid, gid, and umask mount options in jfs.txt
-
Andrew Morton authored
drivers/video/sm501fb.c: In function 'sm501fb_cursor': drivers/video/sm501fb.c:992: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long unsigned int' drivers/video/sm501fb.c:992: warning: format '%08x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrei Konovalov authored
Add support for the video controller IP block included into Xilinx ML300 and ML403 reference designs. Signed-off-by:
Andrei Konovalov <akonovalov@ru.mvista.com> Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Krzysztof Helt authored
This patch fixes incorrect targets of jumps when an error occurs in the pm2fb_probe. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Krzysztof Helt authored
This patch adds a macro to register PCI ids table and corrects type of xxxfb_fix variable to avoid modpost warnings. Signed-off-by:
-
Krzysztof Helt authored
This patch removes two redundant fields in the pm2fb_par structure. Signed-off-by:
-
Krzysztof Helt authored
More corrections to skeletonfb.c file: - fixed types of more arguments - removed returned values in void functions - removed not existing fb_poll function - fixed closing comment typo - corrected misleading constant name ADDR Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
Antonino A. Daplas authored
vga16fb does not just support 8-pixel wide rectangles, but rectangles with widths in multiples of 8. Signed-off-by:
-
Antonino A. Daplas authored
Reported by James Pearson as: boot to run level 3 if not root, then make sure /dev/console is writeable login and type: setterm -blank 0 start X type into an xterm: while true; do echo "" > /dev/console; usleep 100000; done while the above loop is running switch to the text console and back again (Ctrl-Alt-F1 then Ctrl-Alt-F7) ... and the screen will be shifting (and wrapping) to the left. This problem stems from continuously writing text to the system console (which is in KD_TEXT mode) while the foreground console is in KD_GRAPHICS mode. Somewhere along the way, console printing got confused and omitted the KD_GRAPHICS/KD_TEXT test. Thus, vgacon attempted to scroll the screen of X, which causes X to shift. Fix by disallowing vgacon to touch the hardware when the vc is in KD_GRAPHICS mode. A definitive fix entails a full audit of the console code. Signed-off-by:
-
Jan Engelhardt authored
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
-
Krzysztof Helt authored
This is a port of accelerated functions from 2.4 kernel. Only fillrect and copyarea are accelerated. Fillrect is not accelerated in 24-bit mode. [adaplas] Add appropriate flags Signed-off-by:
-
Ondrej Zajicek authored
Move s3fb_get_tilemax to svgalib.c as svga_get_tilemax, because it reports limitation of other code from svgalib (svga_settile, svga_tilecopy, ...) Limit font width to 8 pixels in 4 bpp mode. Signed-off-by:
Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by:
-
Krzysztof Helt authored
This patch disables a memory clock setting if a board has been initialized by BIOS. This allows using the memory clock set by manufacturer of the board. This patch also sets default clock for 3dlabs Permedia 2V reference board's clock to 75MHz (BIOS setting for EONtronic Permedia 2Vboard), because the default 83MHz can be too high. Signed-off-by:
-
krzysztof.h1@wp.pl authored
This patch resets transparency settings when depth changes. Otherwise the 16 and 24-bit modes work incorrectly after switching from 32-bit mode. Signed-off-by: Krzysztof Helt < krzysztof.h1@wp.pl> Signed-off-by:
-
Antonino A. Daplas authored
- Check the console-to-fb mapping in fbcon_get_requirement(), otherwise the value returned may not be valid for the driver. - Minor cleanup Signed-off-by:
-
Antonino A. Daplas authored
Clean up exit patch of fb_set_var(): - consolidate all return values into a single local variable - ensure that return values are valid error codes - fix fb_set_var() returning success when fb_check_caps() failed Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Matthias Kaehlcke authored
The virtual console driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Ville Syrjala authored
Laptops with Rage Mobility and 32bit memory interface seem to require halved XCLK to operate correctly. Signed-off-by:
-
Ville Syrjala authored
Reorganize atyfb clock init code so command line clock overrides are effective for all chips. The old code would silently ignore some of the command line clock overrides with some chips. Signed-off-by:
-
Ville Syrjala authored
Wait 5 ms instead of 500 us for the SPLL to lock. This matches the recommendation in mach64 programmer's guide. Signed-off-by:
-
Antonino A. Daplas authored
Fix return value of nvidiafb_open(). Signed-off-by:
-
Ondrej Zajicek authored
1) sets 'palette access disabled' during read from AR10. This is usually documented as needed for access AR01-AR0F, but on ARK Logic card it is needed for AR10 (otherwise read returns some nonsence and save_vga_text() returns before do anything). 2) do not restore AR10, because it was not changed during 3) remove modification of misc reg: /* force graphics mode */ vga_w(state->vgabase, VGA_MIS_W, misc | 1); as comment is misleading - LSB of misc reg does not set/reset graphics mode, but set color/mono adresses of CRT and some other regs. but these regs are not used during save/restore fonts. (it worked even when (misc | 1) was replaced by (misc & ~1) ). Signed-off-by: -
Antonino A. Daplas authored
Implement fb_get_caps(). This will allow the driver to tell upper layer that it can only support 256 8x16 bitmaps when in tileblitting mode (var->bits_per_pixel == 0); Signed-off-by:
-
Antonino A. Daplas authored
Check if the mode can properly display the screen. This will be needed by drivers where the capability is not constant with each mode. The function fb_set_var() will query fbcon the requirement, then it will query the driver (via a new hook fb_get_caps()) its capability. If the driver's capability cannot handle fbcon's requirement, then fb_set_var() will fail. For example, if a particular driver supports 2 modes where: mode1 = can only display 8x16 bitmaps mode2 = can display any bitmap then if current mode = mode2 and current font = 12x22 fbset <mode1> /* mode1 cannot handle 12x22 */ fbset will fail Signed-off-by:
-
Dave Jones authored
If the chip locks up, we get into a long polling loop, where the softlockup detector kicks in. See https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=151878 for an example. [adaplas] Chip lockup can occur at 3 points (flush, sync, and wait). Consolidate and allow the driver to go to safe mode cleanly. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Krzysztof Helt authored
This patch adds restrictions to calculations of m, n and p factors which sets the pixclock for the Permedia 2V. I found during tests that synchronization is unstable if m (divisor) is bigger than half of the n (numerator). The patch disallows such settings combination. Signed-off-by:
-
Krzysztof Helt authored
Permedia 2V uses its own registers to set a memory clock. The patch adds these registers and uses them in the set_memclock() function. Signed-off-by:
-
Krzysztof Helt authored
This patch adds support for 3dlabs Permedia reference board. Signed-off-by:
-
Alan Cox authored
Switch to pci_get refcounting APIs [adaplas] Fix a long-standing bug where the return value of pci_find_slot()/pci_get_bus_and_slot() is ignored. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Alan Hourihane authored
Add the Intel Vermilion Range framebuffer support. Signed-off-by:
Alan Hourihane <alanh@tungstengraphics.com> Signed-off-by:
-
Ondrej Zajicek authored
This fixes broken fbcon on Virge VX in 24 bpp mode, and contains several other small updates. Signed-off-by:
-
Antonino A. Daplas authored
Some drivers may reset the var->activate field on fb_check_var(). This can lead to undefined behavior. For example, doing fbset -a <option> with vga16fb will only modify the active console instead of modifying all. Signed-off-by:
-
Antonino A. Daplas authored
Fontmaps can be 256 or 512 in length. The only driver that can do tileblitting can only handle 256 characters. Check for this when setting the font. Signed-off-by:
-
Antonino A. Daplas authored
Implement fb_get_tilemax(). It just returns 256. Signed-off-by:
-
