- 22 Jan, 2019 2 commits
-
-
Yishai Hadas authored
Manage indirection mkey upon DEVX flow to support ODP. To support a page fault event on the indirection mkey it needs to be part of the device mkey radix tree. Both the creation and the deletion flows for a DEVX object which is indirection mkey were adapted to handle that. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Once an indirection MKEY is created umem valid bit shouldn't be set as this MKEY doesn't really hold a umem. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 21 Jan, 2019 2 commits
-
-
Xiaofei Tan authored
AEQ overflow will be reported by hardware when too many asynchronous events occurred but not be handled in time. Normally, AEQ overflow error is not easy to occur. Once happened, we have to do physical function reset to recover. PF reset is implemented in two steps. Firstly, set reset level with ae_dev->ops->set_default_reset_request. Secondly, run reset with ae_dev->ops->reset_event. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Zhu Yanjun authored
The variable rxe in the function is not used. So it is removed. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 18 Jan, 2019 7 commits
-
-
Israel Rukshin authored
ib_dma_map_sg() augments the SGL into a 'dma mapped SGL'. This process may change the number of entries and the lengths of each entry. Code that touches dma_address is iterating over the 'dma mapped SGL' and must use dma_nents which returned from ib_dma_map_sg(). ib_sg_to_pages() and ib_map_mr_sg() are using dma_address so they must use dma_nents. Fixes: 39405885 ("IB/iser: Port to new fast registration API") Fixes: bfe066e2 ("IB/iser: Reuse ib_sg_to_pages") Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
YueHaibing authored
Remove unneeded semicolons. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Mike Marciniszyn authored
These fields were missing from the trace. Add them. Fixes: c6ad9482 ("IB/rdmavt: Add tracing for cq entry and poll") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
RDMA cgroup registration routine always returns success, so simplify function to be void and run clang formatter over whole CONFIG_CGROUP_RDMA art of core_priv.h. This reduces unwinding error path for regular registration and future net namespace change functionality for rdma device. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/hw/qedr/verbs.c: In function 'qedr_create_srq': drivers/infiniband/hw/qedr/verbs.c:1436:22: warning: variable 'ib_ctx' set but not used [-Wunused-but-set-variable] drivers/infiniband/hw/qedr/verbs.c: In function 'qedr_create_user_qp': drivers/infiniband/hw/qedr/verbs.c:1701:22: warning: variable 'ib_ctx' set but not used [-Wunused-but-set-variable] Fixes: b0ea0fa5 ("IB/{core,hw}: Have ib_umem_get extract the ib_ucontext from ib_udata") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
No reason to open code this loop. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com>
-
Lijun Ou authored
When flush cqe, it needs to get the pointer of rq and sq from db address space of user and update it into qp context by modified qp. if rq does not exist, it will not get the value from db address space of user. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 15 Jan, 2019 2 commits
-
-
Gustavo A. R. Silva authored
Replace kzalloc() function with its 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a, b, gfp) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Raju Rangoju authored
The patch 944661dd: "RDMA/iw_cxgb4: atomically lookup ep and get a reference" from May 6, 2016, leads to the following Smatch complaint: drivers/infiniband/hw/cxgb4/cm.c:2953 terminate() error: we previously assumed 'ep' could be null (see line 2945) Fixes: 944661dd ("RDMA/iw_cxgb4: atomically lookup ep and get a reference") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 14 Jan, 2019 4 commits
-
-
Myungho Jung authored
If cma_acquire_dev_by_src_ip() returns error in addr_handler(), the device state changes back to RDMA_CM_ADDR_BOUND but the resolved source IP address is still left. After that, if rdma_destroy_id() is called after rdma_listen(), the device is freed without removed from listen_any_list in cma_cancel_operation(). Revert to the previous IP address if acquiring device fails. Reported-by: syzbot+f3ce716af730c8f96637@syzkaller.appspotmail.com Signed-off-by: Myungho Jung <mhjungk@gmail.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Dan Carpenter authored
This is from static analysis not from testing. Depending on the value of rcfw->cmdq_depth, then this might not cause an issue at runtime. The BITS_TO_LONGS() macro tells us how many longs it take to hold a bitmap. In other words, it divides by the number if bits per long and rounds up. Then we want to take that number and multiple by sizeof(long) to get the number of bytes to allocate. The code here does the multiplication first so the rounding up is done in the wrong place. So imagine we want to allocate 1 bit, then "(1 * 8) / 64 = 1" when we round up. But it should be "(1 / 64) * 8 = 8". In other words, because of the rounding difference we might allocate up to "sizeof(long) - 1" bytes fewer than intended. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-By: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Introduce and use rdma_device_to_ibdev() API for those drivers which are registering one sysfs group and also use in ib_core. In subsequent patch, device->provider_ibdev one-to-one mapping is no longer holds true during accessing sysfs entries. Therefore, introduce an API rdma_device_to_ibdev() that provides such information. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Most provider routines are callback routines which ib core invokes. _callback suffix doesn't convey information about when such callback is invoked. Therefore, rename port_callback to init_port. Additionally, store the init_port function pointer in ib_device_ops, so that it can be accessed in subsequent patches when binding rdma device to net namespace. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 11 Jan, 2019 8 commits
-
-
Leon Romanovsky authored
As part of an audit process to update drivers to use rdma_restrack_add() ensure that CTX objects is cleared before access. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
As part of an audit process to update drivers to use rdma_restrack_add() ensure that CQ objects is cleared before access. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
As part of an audit process to update drivers to use rdma_restrack_add() ensure that PD objects is cleared before access. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Gal Pressman authored
The pkey table size is QEDR_ROCE_PKEY_TABLE_LEN, index should be tested for >= QEDR_ROCE_PKEY_TABLE_LEN instead of > QEDR_ROCE_PKEY_TABLE_LEN. Fixes: a7efd777 ("qedr: Add support for PD,PKEY and CQ verbs") Signed-off-by: Gal Pressman <galpress@amazon.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Gal Pressman authored
The pkey table size is one element, index should be tested for > 0 instead of > 1. Fixes: fe2caefc ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Gal Pressman authored
The pkey table size is one element, index should be tested for > 0 instead of > 1. Fixes: e3cf00d0 ("IB/usnic: Add Cisco VIC low-level hardware driver") Signed-off-by: Gal Pressman <galpress@amazon.com> Acked-by: Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
ib_umem_get() can only be called in a method callback, which always has a udata parameter. This allows ib_umem_get() to derive the ucontext pointer directly from the udata without requiring the drivers to find it in some way or another. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
-
Shamir Rabinovitch authored
The next patch will add dependency from ib_umem_get in to ib_uverbs so move the required ib_umem_xxx functionality to it's correct module - ib_uverbs - and avoid circular dependecy from the form of ib_core -> ib_uverbs -> ib_core in depmod. Since this now requires all drivers to be build modular if uverbs is modular, hoist the test a couple drivers had into the main kconfig and apply it to all drivers uniformly. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 08 Jan, 2019 6 commits
-
-
Leon Romanovsky authored
The implementation of mlx5_core_page_fault_resume() was removed in commit d5d284b8 ("{net,IB}/mlx5: Move Page fault EQ and ODP logic to RDMA"). This patch removes declaration too. Fixes: d5d284b8 ("{net,IB}/mlx5: Move Page fault EQ and ODP logic to RDMA") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Convert various places to more readable code, which embeds CONFIG_INFINIBAND_ON_DEMAND_PAGING into the code flow. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Consolidate various checks if MR is ODP backed to one simple helper and update call sites to use it. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Device capability bits are exposing what specific device supports from HW perspective. Those bits are not dependent on kernel configurations and RDMA/core should ensure that proper interfaces to users will be disabled if CONFIG_INFINIBAND_ON_DEMAND_PAGING is not set. Fixes: f4056bfd ("IB/core: Add on demand paging caps to ib_uverbs_ex_query_device") Fixes: 8cdd312c ("IB/mlx5: Implement the ODP capability query verb") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
CONFIG_INFINIBAND_ON_DEMAND_PAGING is used in general structures to micro-optimize the memory footprint. Remove it, so it will allow us to simplify various ODP device flows. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 07 Jan, 2019 9 commits
-
-
Lijun Ou authored
Modify the pbl ba page size to 16K for in order to support 4G MR size. Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Lijun Ou authored
According to IB protocol, local ACK timeout shall be a 5 bit value. Currently, hip08 could not support the possible max value 31. Fail the request in this case. Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Lijun Ou authored
In some application scenario, the user could not have receive queue when run rdma write or read operation. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Lijun Ou authored
When flush cqe with srq, the driver disable to update the rq head pointer into the hardware. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Potnuri Bharat Teja authored
Inorder to optimize the NVMEoF read IOPs, iw_cxgb4 posts a FW Write with Completion WQE that combines an RDMA Write WR and the subsequent RDMA Send with Invalidate WR. This patch is an extension to it, where it posts a Write with completion for RDMA WRITE WR + RDMA SEND WR combination as well. Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Linus Torvalds authored
-