- 03 Nov, 2015 22 commits
-
-
Stefan Sørensen authored
Only using the message type and sequence id for matching timestamps with packets is error prone, as multiple clients may very well be sending packets with the same messagetype and timestamp at the same time. Fix by extending the check to include the hash of bytes 20-29 (source id in PTPv2) that is provided with the timestamps. Signed-off-by:
Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Or Gerlitz says: ==================== Mellanox mlx5e driver update, Nov 3 2015 This series contains bunch of small fixes to the mlx5e driver from Achiad. Changes from V0: - removed the driver patch that dealt with IRQ affinity changes during NAPI poll, as this is a generic problem which needs generic solution. ==================== Signed-off-by: -
Achiad Shochat authored
Consider vlan insertion impact on headers copy size also for LSO packets. Signed-off-by:
Achiad Shochat <achiad@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Achiad Shochat authored
This reverts commit cd58c714 "net/mlx5e: Disable client vlan TX acceleration". Bring back client vlan insertion offload, the original performance issue was found and fixed in the next patch. Signed-off-by:
-
Achiad Shochat authored
In case mlx5e_set_features() fails, return the failure status rather than 0. Signed-off-by:
-
Achiad Shochat authored
Consider MLX5E_MAX_NUM_CHANNELS @ethtool set/get_channels Signed-off-by:
-
Achiad Shochat authored
Instead of storing the msix array index in eq->irqn (vecidx), store the real irq number. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Achiad Shochat authored
Use jiffies rather than wait loop with msleep(). The wait loop didn't take into consideration time when the process was not executing. Signed-off-by:
-
Achiad Shochat authored
In case a configuration operation that involves closing and re-opening resources (e.g RX/TX queue size change) fails at the re-opening stage these resources will remain closed. So when executing (following) configuration operations (e.g ifconfig down) we cannot assume that these resources are available. Signed-off-by:
-
Jarod Wilson authored
There are some netdev features, which when disabled on an upper device, such as a bonding master or a bridge, must be disabled and cannot be re-enabled on underlying devices. This is a rework of an earlier more heavy-handed appraoch, which simply disables and prevents re-enabling of netdev features listed in a new define in include/net/netdev_features.h, NETIF_F_UPPER_DISABLES. Any upper device that disables a flag in that feature mask, the disabling will propagate down the stack, and any lower device that has any upper device with one of those flags disabled should not be able to enable said flag. Initially, only LRO is included for proof of concept, and because this code effectively does the same thing as dev_disable_lro(), though it will also activate from the ethtool path, which was one of the goals here. [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -K bond0 lro off [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: off [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: off dmesg dump: [ 1033.277986] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 1034.067949] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 1034.753612] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 1035.591019] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 This has been successfully tested with bnx2x, qlcnic and netxen network cards as slaves in a bond interface. Turning LRO on or off on the master also turns it on or off on each of the slaves, new slaves are added with LRO in the same state as the master, and LRO can't be toggled on the slaves. Also, this should largely remove the need for dev_disable_lro(), and most, if not all, of its call sites can be replaced by simply making sure NETIF_F_LRO isn't included in the relevant device's feature flags. Note that this patch is driven by bug reports from users saying it was confusing that bonds and slaves had different settings for the same features, and while it won't be 100% in sync if a lower device doesn't support a feature like LRO, I think this is a good step in the right direction. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Sergei Shtylyov authored
The correct name of the RX descriptor 0 bit 30 is RDLE (receive descriptor list end), not RDEL. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David S. Miller authored
Mahesh Bandewar says: ==================== re-org actor admin/oper key updates I was observing machines entering into weird LACP state when the partner is in passive mode. This issue is not because of the partners in passive state but probably because of some operational key update which is pushing the state-machine is that weird state. This was happening randomly on about 1% of the machine (when the sample size is a large set of machines with a variety of NICs/ports bonded). In this patch-series I'm attempting to unify the logic of actor-key / operational-key changes to one place to avoid possible errors in update. Also this eliminates the need for the event-handler to decide if the key needs update. After this patch-set none of the machines (from same sample set) were exhibiting LACP-weirdness that was observed earlier. ==================== Signed-off-by: -
Mahesh Bandewar authored
Old logic of updating state-machine is not required since ad_update_actor_keys() does it implicitly. The only loss is the notification differentiation between speed vs. duplex change. Now only one unified notification is printed. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Mahesh Bandewar authored
actor_admin, and actor_oper key is changed at multiple locations in the code. This patch brings all those updates into one location in an attempt to avoid possible inconsistent updates causing LACP state machine to go in weird state. The unified place is ad_update_actor_key() with simple state-machine logic - (a) If port is "duplex" then only it can participate in LACP (b) Speed change reinitializes the LACP state-machine. Signed-off-by:
-
Mahesh Bandewar authored
Eliminate 'else' clause by simply initializing variable Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF updates This set adds support for persistent maps/progs. Please see individual patches for further details. A man-page update to bpf(2) will be sent later on, also a iproute2 patch for support in tc. v1 -> v2: - Reworked most of patch 4 and 5 - Rebased to latest net-next ==================== Signed-off-by: -
Daniel Borkmann authored
This patch adds a couple of stand-alone examples on how BPF_OBJ_PIN and BPF_OBJ_GET commands can be used. Example with maps: # ./fds_example -F /sys/fs/bpf/m -P -m -k 1 -v 42 bpf: map fd:3 (Success) bpf: pin ret:(0,Success) bpf: fd:3 u->(1:42) ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m -G -m -k 1 bpf: get fd:3 (Success) bpf: fd:3 l->(1):42 ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m -G -m -k 1 -v 24 bpf: get fd:3 (Success) bpf: fd:3 u->(1:24) ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m -G -m -k 1 bpf: get fd:3 (Success) bpf: fd:3 l->(1):24 ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m2 -P -m bpf: map fd:3 (Success) bpf: pin ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m2 -G -m -k 1 bpf: get fd:3 (Success) bpf: fd:3 l->(1):0 ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m2 -G -m bpf: get fd:3 (Success) Example with progs: # ./fds_example -F /sys/fs/bpf/p -P -p bpf: prog fd:3 (Success) bpf: pin ret:(0,Success) bpf sock:4 <- fd:3 attached ret:(0,Success) # ./fds_example -F /sys/fs/bpf/p -G -p bpf: get fd:3 (Success) bpf: sock:4 <- fd:3 attached ret:(0,Success) # ./fds_example -F /sys/fs/bpf/p2 -P -p -o ./sockex1_kern.o bpf: prog fd:5 (Success) bpf: pin ret:(0,Success) bpf: sock:3 <- fd:5 attached ret:(0,Success) # ./fds_example -F /sys/fs/bpf/p2 -G -p bpf: get fd:3 (Success) bpf: sock:4 <- fd:3 attached ret:(0,Success) Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
This work adds support for "persistent" eBPF maps/programs. The term "persistent" is to be understood that maps/programs have a facility that lets them survive process termination. This is desired by various eBPF subsystem users. Just to name one example: tc classifier/action. Whenever tc parses the ELF object, extracts and loads maps/progs into the kernel, these file descriptors will be out of reach after the tc instance exits. So a subsequent tc invocation won't be able to access/relocate on this resource, and therefore maps cannot easily be shared, f.e. between the ingress and egress networking data path. The current workaround is that Unix domain sockets (UDS) need to be instrumented in order to pass the created eBPF map/program file descriptors to a third party management daemon through UDS' socket passing facility. This makes it a bit complicated to deploy shared eBPF maps or programs (programs f.e. for tail calls) among various processes. We've been brainstorming on how we could tackle this issue and various approches have been tried out so far, which can be read up further in the below reference. The architecture we eventually ended up with is a minimal file system that can hold map/prog objects. The file system is a per mount namespace singleton, and the default mount point is /sys/fs/bpf/. Any subsequent mounts within a given namespace will point to the same instance. The file system allows for creating a user-defined directory structure. The objects for maps/progs are created/fetched through bpf(2) with two new commands (BPF_OBJ_PIN/BPF_OBJ_GET). I.e. a bpf file descriptor along with a pathname is being passed to bpf(2) that in turn creates (we call it eBPF object pinning) the file system nodes. Only the pathname is being passed to bpf(2) for getting a new BPF file descriptor to an existing node. The user can use that to access maps and progs later on, through bpf(2). Removal of file system nodes is being managed through normal VFS functions such as unlink(2), etc. The file system code is kept to a very minimum and can be further extended later on. The next step I'm working on is to add dump eBPF map/prog commands to bpf(2), so that a specification from a given file descriptor can be retrieved. This can be used by things like CRIU but also applications can inspect the meta data after calling BPF_OBJ_GET. Big thanks also to Alexei and Hannes who significantly contributed in the design discussion that eventually let us end up with this architecture here. Reference: https://lkml.org/lkml/2015/10/15/925Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Daniel Borkmann authored
We currently have duplicated cleanup code in bpf_prog_put() and bpf_prog_put_rcu() cleanup paths. Back then we decided that it was not worth it to make it a common helper called by both, but with the recent addition of resource charging, we could have avoided the fix in commit ac00737f ("bpf: Need to call bpf_prog_uncharge_memlock from bpf_prog_put") if we would have had only a single, common path. We can simplify it further by assigning aux->prog only once during allocation time. Signed-off-by:
-
Daniel Borkmann authored
Add a bpf_map_get() function that we're going to use later on and align/clean the remaining helpers a bit so that we have them a bit more consistent: - __bpf_map_get() and __bpf_prog_get() that both work on the fd struct, check whether the descriptor is eBPF and return the pointer to the map/prog stored in the private data. Also, we can return f.file->private_data directly, the function signature is enough of a documentation already. - bpf_map_get() and bpf_prog_get() that both work on u32 user fd, call their respective __bpf_map_get()/__bpf_prog_get() variants, and take a reference. Signed-off-by: -
Daniel Borkmann authored
Since we're going to use anon_inode_getfd() invocations in more than just the current places, make a helper function for both, so that we only need to pass a map/prog pointer to the helper itself in order to get a fd. The new helpers are called bpf_map_new_fd() and bpf_prog_new_fd(). Signed-off-by:
-
Eric Dumazet authored
This patch fixes following problems : 1) percpu_counter_init() can return an error, therefore init_frag_mem_limit() must propagate this error so that inet_frags_init_net() can do the same up to its callers. 2) If ip[46]_frags_ns_ctl_register() fail, we must unwind properly and free the percpu_counter. Without this fix, we leave freed object in percpu_counters global list (if CONFIG_HOTPLUG_CPU) leading to crashes. This bug was detected by KASAN and syzkaller tool (http://github.com/google/syzkaller) Fixes: 6d7b857d ("net: use lib/percpu_counter API for fragmentation mem accounting") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
-
- 02 Nov, 2015 17 commits
-
-
Simon Horman authored
This corrects what appear to be typos, making the code consistent with itself, and allowing meaningful prefixes to be displayed with the errors in question. Before: (null): failed to initialize MDIO (null): Cannot allocate desc base address table (size 176 bytes) After: ravb e6800000.ethernet: failed to initialize MDIO ravb e6800000.ethernet: Cannot allocate desc base address table (size 176 bytes) Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Eric Dumazet authored
skb_set_owner_w() is called from various places that assume skb->sk always point to a full blown socket (as it changes sk->sk_wmem_alloc) We'd like to attach skb to request sockets, and in the future to timewait sockets as well. For these kind of pseudo sockets, we need to take a traditional refcount and use sock_edemux() as the destructor. It is now time to un-inline skb_set_owner_w(), being too big. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Ido Schimmel authored
br_should_learn() is protected by RCU and not by RTNL, so use correct flavor of nbp_vlan_group(). Fixes: 907b1e6e ("bridge: vlan: use proper rcu for the vlgrp member") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vivien Didelot authored
All the mv88e6xxx drivers use the exact same code in their probe function to lookup the switch name given its ID. Thus introduce a mv88e6xxx_switch_id structure and a mv88e6xxx_lookup_name function in the common mv88e6xxx code. In the meantime make __mv88e6xxx_reg_{read,write} static since we do not need to expose these low-level r/w routines anymore. Signed-off-by:Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Vivien Didelot authored
It's easy to forget to lock the smi_mutex before calling the low-level _mv88e6xxx_reg_{read,write}, so add a assert_smi_lock function in them. Signed-off-by: -
Yang Shi authored
When running bpf samples on rt kernel, it reports the below warning: BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 128, pid: 477, name: ping Preemption disabled at:[<ffff80000017db58>] kprobe_perf_func+0x30/0x228 CPU: 3 PID: 477 Comm: ping Not tainted 4.1.10-rt8 #4 Hardware name: Freescale Layerscape 2085a RDB Board (DT) Call trace: [<ffff80000008a5b0>] dump_backtrace+0x0/0x128 [<ffff80000008a6f8>] show_stack+0x20/0x30 [<ffff8000007da90c>] dump_stack+0x7c/0xa0 [<ffff8000000e4830>] ___might_sleep+0x188/0x1a0 [<ffff8000007e2200>] rt_spin_lock+0x28/0x40 [<ffff80000018bf9c>] htab_map_update_elem+0x124/0x320 [<ffff80000018c718>] bpf_map_update_elem+0x40/0x58 [<ffff800000187658>] __bpf_prog_run+0xd48/0x1640 [<ffff80000017ca6c>] trace_call_bpf+0x8c/0x100 [<ffff80000017db58>] kprobe_perf_func+0x30/0x228 [<ffff80000017dd84>] kprobe_dispatcher+0x34/0x58 [<ffff8000007e399c>] kprobe_handler+0x114/0x250 [<ffff8000007e3bf4>] kprobe_breakpoint_handler+0x1c/0x30 [<ffff800000085b80>] brk_handler+0x88/0x98 [<ffff8000000822f0>] do_debug_exception+0x50/0xb8 Exception stack(0xffff808349687460 to 0xffff808349687580) 7460: 4ca2b600 ffff8083 4a3a7000 ffff8083 49687620 ffff8083 0069c5f8 ffff8000 7480: 00000001 00000000 007e0628 ffff8000 496874b0 ffff8083 007e1de8 ffff8000 74a0: 496874d0 ffff8083 0008e04c ffff8000 00000001 00000000 4ca2b600 ffff8083 74c0: 00ba2e80 ffff8000 49687528 ffff8083 49687510 ffff8083 000e5c70 ffff8000 74e0: 00c22348 ffff8000 00000000 ffff8083 49687510 ffff8083 000e5c74 ffff8000 7500: 4ca2b600 ffff8083 49401800 ffff8083 00000001 00000000 00000000 00000000 7520: 496874d0 ffff8083 00000000 00000000 00000000 00000000 00000000 00000000 7540: 2f2e2d2c 33323130 00000000 00000000 4c944500 ffff8083 00000000 00000000 7560: 00000000 00000000 008751e0 ffff8000 00000001 00000000 124e2d1d 00107b77 Convert hashtab lock to raw lock to avoid such warning. Signed-off-by:
Yang Shi <yang.shi@linaro.org> Acked-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== bridge: vlan: failure path and comment fixes This is a set from Ido which takes care of one failure path error in nbp_vlan_init (patch 1) and a few comment errors (patch 2). I must admit I didn't expect the port init continues after a vlan init failure but should've checked to make sure. Thanks to Ido for catching these! ==================== Signed-off-by: -
Ido Schimmel authored
The flag used to indicate if a VLAN should be used for filtering - as opposed to context only - on the bridge itself (e.g. br0) is called 'brentry' and not 'brvlan'. Signed-off-by:
-
Ido Schimmel authored
When adding a port to a bridge we initialize VLAN filtering on it. We do not bail out in case an error occurred in nbp_vlan_init, as it can be used as a non VLAN filtering bridge. However, if VLAN filtering is required and an error occurred in nbp_vlan_init, we should set vlgrp to NULL, so that VLAN filtering functions (e.g. br_vlan_find, br_get_pvid) will know the struct is invalid and will not try to access it. Signed-off-by:
-
Eric Dumazet authored
IPv6 request sockets store a pointer to skb containing the SYN packet to be able to transfer it to full blown socket when 3WHS is done (ireq->pktopts -> np->pktoptions) As explained in commit 5e0724d0 ("tcp/dccp: fix hashdance race for passive sessions"), we must transfer the skb only if we won the hashdance race, if multiple cpus receive the 'ack' packet completing 3WHS at the same time. Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets") Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
-
santosh.shilimkar@oracle.com authored
To further improve the RDS connection scalabilty on massive systems where number of sockets grows into tens of thousands of sockets, there is a need of larger bind hashtable. Pre-allocated 8K or 16K table is not very flexible in terms of memory utilisation. The rhashtable infrastructure gives us the flexibility to grow the hashtbable based on use and also comes up with inbuilt efficient bucket(chain) handling. Reviewed-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Saurabh Sengar authored
as result of function rds_iw_flush_mr_pool is nowhere checked, changing its return type from int to void. also removing the unused variable rc as there is nothing to return Signed-off-by:
Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by:
-
David S. Miller authored
Javier Martinez Canillas says: ==================== net: encx24j600: Fix SPI driver module autoload Recently I've been trying to fix module autoloading for all SPI drivers and found that the encx24j600 driver does not fill module alias information due missing a MODULE_DEVICE_TABLE() so module autload won't work and the driver Kconfig symbol is tristate which means the driver can be built as a module. But also the SPI id table is not correctly defined so this series fixes both issues. ==================== Signed-off-by: -
Javier Martinez Canillas authored
The driver Kconfig symbol is tristate which means that it can be built as a module but the module alias information is not added to the module info so module autoload won't work since user-space won't have the information. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
A driver's SPI id table is expected to be an array of struct spi_device_id that ends with a zero-initialized sentinel entry. But this driver defines the table as a single struct spi_device_id and sets .id_table to a pointer to this struct. But spi_match_id() has a loop that iterates while the struct spi_device_id .name[0] is not NULL, so not having a sentinel can cause a NULL pointer deference error. This patch defines the SPI id table correctly as all other SPI drivers do. Signed-off-by:
-
Govindarajulu Varadarajan authored
The affinity hint is used by the user space daemon, irqbalancer, to indicate a preferred CPU mask for irqs. This patch sets the irq affinity hint to local numa core first, when exausted we try non-local numa cores. Also set tx xps cpus mask bassed on affinity hint. v2: remove the global affinity policy. Signed-off-by:
Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by:
-
Paolo Abeni authored
This patch changes how the multipath hash is computed for locally generated flows: now the hash comprises l4 information. This allows better utilization of the available paths when the existing flows have the same source IP and the same destination IP: with l3 hash, even when multiple connections are in place simultaneously, a single path will be used, while with l4 hash we can use all the available paths. v2 changes: - use get_hash_from_flowi4() instead of implementing just another l4 hash function Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
- 01 Nov, 2015 1 commit
-
-
Tina Ruchandani authored
This patch changes the use of struct timespec in dccp_probe to use struct timespec64 instead. timespec uses a 32-bit seconds field which will overflow in the year 2038 and beyond. timespec64 uses a 64-bit seconds field. Note that the correctness of the code isn't changed, since the original code only uses the timestamps to compute a small elapsed interval. This patch is part of a larger attempt to remove instances of 32-bit timekeeping structures (timespec, timeval, time_t) from the kernel so it is easier to identify where the real 2038 issues are. Signed-off-by:
Tina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by:
-
