- 02 Oct, 2019 15 commits
-
-
Yizhuo authored
In function mdio_sc_cfg_reg_write(), variable "reg_value" could be uninitialized if regmap_read() fails. However, "reg_value" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Remove the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). Patch from Florian Westphal. 2) Fix deadlock in nft_connlimit between packet path updates and the garbage collector. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Because ptp_qoriq_settime is being called prior to spin_lock_init, the following stack trace can be seen at driver probe time: [ 2.269117] the code is fine but needs lockdep annotation. [ 2.274569] turning off the locking correctness validator. [ 2.280027] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc7-01478-g01eaa67a4797 #263 [ 2.288073] Hardware name: Freescale LS1021A [ 2.292337] [<c0313cb4>] (unwind_backtrace) from [<c030e11c>] (show_stack+0x10/0x14) [ 2.300045] [<c030e11c>] (show_stack) from [<c1219440>] (dump_stack+0xcc/0xf8) [ 2.307235] [<c1219440>] (dump_stack) from [<c03b9b44>] (register_lock_class+0x730/0x73c) [ 2.315372] [<c03b9b44>] (register_lock_class) from [<c03b6190>] (__lock_acquire+0x78/0x270c) [ 2.323856] [<c03b6190>] (__lock_acquire) from [<c03b90cc>] (lock_acquire+0xe0/0x22c) [ 2.331649] [<c03b90cc>] (lock_acquire) from [<c123c310>] (_raw_spin_lock_irqsave+0x54/0x68) [ 2.340048] [<c123c310>] (_raw_spin_lock_irqsave) from [<c0e73fe4>] (ptp_qoriq_settime+0x38/0x80) [ 2.348878] [<c0e73fe4>] (ptp_qoriq_settime) from [<c0e746d4>] (ptp_qoriq_init+0x1f8/0x484) [ 2.357189] [<c0e746d4>] (ptp_qoriq_init) from [<c0e74aac>] (ptp_qoriq_probe+0xd0/0x184) [ 2.365243] [<c0e74aac>] (ptp_qoriq_probe) from [<c0b0a07c>] (platform_drv_probe+0x48/0x9c) [ 2.373555] [<c0b0a07c>] (platform_drv_probe) from [<c0b07a14>] (really_probe+0x1c4/0x400) [ 2.381779] [<c0b07a14>] (really_probe) from [<c0b07e28>] (driver_probe_device+0x78/0x1b8) [ 2.390003] [<c0b07e28>] (driver_probe_device) from [<c0b081d0>] (device_driver_attach+0x58/0x60) [ 2.398832] [<c0b081d0>] (device_driver_attach) from [<c0b082d4>] (__driver_attach+0xfc/0x160) [ 2.407402] [<c0b082d4>] (__driver_attach) from [<c0b05a84>] (bus_for_each_dev+0x68/0xb4) [ 2.415539] [<c0b05a84>] (bus_for_each_dev) from [<c0b06b68>] (bus_add_driver+0x104/0x20c) [ 2.423763] [<c0b06b68>] (bus_add_driver) from [<c0b0909c>] (driver_register+0x78/0x10c) [ 2.431815] [<c0b0909c>] (driver_register) from [<c030313c>] (do_one_initcall+0x8c/0x3ac) [ 2.439954] [<c030313c>] (do_one_initcall) from [<c1f013f4>] (kernel_init_freeable+0x468/0x548) [ 2.448610] [<c1f013f4>] (kernel_init_freeable) from [<c12344d8>] (kernel_init+0x8/0x10c) [ 2.456745] [<c12344d8>] (kernel_init) from [<c03010b4>] (ret_from_fork+0x14/0x20) [ 2.464273] Exception stack(0xea89ffb0 to 0xea89fff8) [ 2.469297] ffa0: 00000000 00000000 00000000 00000000 [ 2.477432] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.485566] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 Fixes: ff54571a ("ptp_qoriq: convert to use ptp_qoriq_init/free") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vladimir Oltean says: ==================== SJA1105 DSA locking fixes for PTP This series fixes the locking API usage problems spotted when compiling the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_DEBUG_SPINLOCK=y. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Currently this stack trace can be seen with CONFIG_DEBUG_ATOMIC_SLEEP=y: [ 41.568348] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 [ 41.576757] in_atomic(): 1, irqs_disabled(): 0, pid: 208, name: ptp4l [ 41.583212] INFO: lockdep is turned off. [ 41.587123] CPU: 1 PID: 208 Comm: ptp4l Not tainted 5.3.0-rc6-01445-ge950f2d4bc7f-dirty #1827 [ 41.599873] [<c0313d7c>] (unwind_backtrace) from [<c030e13c>] (show_stack+0x10/0x14) [ 41.607584] [<c030e13c>] (show_stack) from [<c1212d50>] (dump_stack+0xd4/0x100) [ 41.614863] [<c1212d50>] (dump_stack) from [<c037dfc8>] (___might_sleep+0x1c8/0x2b4) [ 41.622574] [<c037dfc8>] (___might_sleep) from [<c122ea90>] (__mutex_lock+0x48/0xab8) [ 41.630368] [<c122ea90>] (__mutex_lock) from [<c122f51c>] (mutex_lock_nested+0x1c/0x24) [ 41.638340] [<c122f51c>] (mutex_lock_nested) from [<c0c6fe08>] (sja1105_static_config_reload+0x30/0x27c) [ 41.647779] [<c0c6fe08>] (sja1105_static_config_reload) from [<c0c7015c>] (sja1105_hwtstamp_set+0x108/0x1cc) [ 41.657562] [<c0c7015c>] (sja1105_hwtstamp_set) from [<c0feb650>] (dev_ifsioc+0x18c/0x330) [ 41.665788] [<c0feb650>] (dev_ifsioc) from [<c0febbd8>] (dev_ioctl+0x320/0x6e8) [ 41.673064] [<c0febbd8>] (dev_ioctl) from [<c0f8b1f4>] (sock_ioctl+0x334/0x5e8) [ 41.680340] [<c0f8b1f4>] (sock_ioctl) from [<c05404a8>] (do_vfs_ioctl+0xb0/0xa10) [ 41.687789] [<c05404a8>] (do_vfs_ioctl) from [<c0540e3c>] (ksys_ioctl+0x34/0x58) [ 41.695151] [<c0540e3c>] (ksys_ioctl) from [<c0301000>] (ret_fast_syscall+0x0/0x28) [ 41.702768] Exception stack(0xe8495fa8 to 0xe8495ff0) [ 41.707796] 5fa0: beff4a8c 00000001 00000011 000089b0 beff4a8c beff4a80 [ 41.715933] 5fc0: beff4a8c 00000001 0000000c 00000036 b6fa98c8 004e19c1 00000001 00000000 [ 41.724069] 5fe0: 004dcedc beff4a6c 004c0738 b6e7af4c [ 41.729860] BUG: scheduling while atomic: ptp4l/208/0x00000002 [ 41.735682] INFO: lockdep is turned off. Enabling RX timestamping will logically disturb the fastpath (processing of meta frames). Replace bool hwts_rx_en with a bit that is checked atomically from the fastpath and temporarily unset from the sleepable context during a change of the RX timestamping process (a destructive operation anyways, requires switch reset). If found unset, the fastpath (net/dsa/tag_sja1105.c) will just drop any received meta frame and not take the meta_lock at all. Fixes: a602afd2 ("net: dsa: sja1105: Expose PTP timestamping ioctls to userspace") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Otherwise, with CONFIG_DEBUG_SPINLOCK=y, this stack trace gets printed when enabling RX timestamping and receiving a PTP frame: [ 318.537078] INFO: trying to register non-static key. [ 318.542040] the code is fine but needs lockdep annotation. [ 318.547500] turning off the locking correctness validator. [ 318.552972] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-13257-g0825b0669811-dirty #1962 [ 318.561283] Hardware name: Freescale LS1021A [ 318.565566] [<c03144bc>] (unwind_backtrace) from [<c030e164>] (show_stack+0x10/0x14) [ 318.573289] [<c030e164>] (show_stack) from [<c11b9f50>] (dump_stack+0xd4/0x100) [ 318.580579] [<c11b9f50>] (dump_stack) from [<c03b9b40>] (register_lock_class+0x728/0x734) [ 318.588731] [<c03b9b40>] (register_lock_class) from [<c03b60c4>] (__lock_acquire+0x78/0x25cc) [ 318.597227] [<c03b60c4>] (__lock_acquire) from [<c03b8ef8>] (lock_acquire+0xd8/0x234) [ 318.605033] [<c03b8ef8>] (lock_acquire) from [<c11db934>] (_raw_spin_lock+0x44/0x54) [ 318.612755] [<c11db934>] (_raw_spin_lock) from [<c1164370>] (sja1105_rcv+0x1f8/0x4e8) [ 318.620561] [<c1164370>] (sja1105_rcv) from [<c115d7cc>] (dsa_switch_rcv+0x80/0x204) [ 318.628283] [<c115d7cc>] (dsa_switch_rcv) from [<c0f58c80>] (__netif_receive_skb_one_core+0x50/0x6c) [ 318.637386] [<c0f58c80>] (__netif_receive_skb_one_core) from [<c0f58f04>] (netif_receive_skb_internal+0xac/0x264) [ 318.647611] [<c0f58f04>] (netif_receive_skb_internal) from [<c0f59e98>] (napi_gro_receive+0x1d8/0x338) [ 318.656887] [<c0f59e98>] (napi_gro_receive) from [<c0c298a4>] (gfar_clean_rx_ring+0x328/0x724) [ 318.665472] [<c0c298a4>] (gfar_clean_rx_ring) from [<c0c29e60>] (gfar_poll_rx_sq+0x34/0x94) [ 318.673795] [<c0c29e60>] (gfar_poll_rx_sq) from [<c0f5b40c>] (net_rx_action+0x128/0x4f8) [ 318.681860] [<c0f5b40c>] (net_rx_action) from [<c03022f0>] (__do_softirq+0x148/0x5ac) [ 318.689666] [<c03022f0>] (__do_softirq) from [<c0355af4>] (irq_exit+0x160/0x170) [ 318.697040] [<c0355af4>] (irq_exit) from [<c03c6818>] (__handle_domain_irq+0x60/0xb4) [ 318.704847] [<c03c6818>] (__handle_domain_irq) from [<c07e9440>] (gic_handle_irq+0x58/0x9c) [ 318.713172] [<c07e9440>] (gic_handle_irq) from [<c0301a70>] (__irq_svc+0x70/0x98) [ 318.720622] Exception stack(0xc2001f18 to 0xc2001f60) [ 318.725656] 1f00: 00000001 00000006 [ 318.733805] 1f20: 00000000 c20165c0 ffffe000 c2010cac c2010cf4 00000001 00000000 c2010c88 [ 318.741955] 1f40: c1f7a5a8 00000000 00000000 c2001f68 c03ba140 c030a288 200e0013 ffffffff [ 318.750110] [<c0301a70>] (__irq_svc) from [<c030a288>] (arch_cpu_idle+0x24/0x3c) [ 318.757486] [<c030a288>] (arch_cpu_idle) from [<c038a480>] (do_idle+0x1b8/0x2a4) [ 318.764859] [<c038a480>] (do_idle) from [<c038a94c>] (cpu_startup_entry+0x18/0x1c) [ 318.772407] [<c038a94c>] (cpu_startup_entry) from [<c1e00f10>] (start_kernel+0x4cc/0x4fc) Fixes: 844d7edc ("net: dsa: sja1105: Add a global sja1105_tagger_data structure") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dotan Barak authored
rds_ibdev:ipaddr_list and rds_ibdev:conn_list are initialized after allocation some resources such as protection domain. If allocation of such resources fail, then these uninitialized variables are accessed in rds_ib_dev_free() in failure path. This can potentially crash the system. The code has been updated to initialize these variables very early in the function. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Sudhakar Dindukurti <sudhakar.dindukurti@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Walleij authored
There has been some confusion between the port number and the VLAN ID in this driver. What we need to check for validity is the VLAN ID, nothing else. The current confusion came from assigning a few default VLANs for default routing and we need to rewrite that properly. Instead of checking if the port number is a valid VLAN ID, check the actual VLAN IDs passed in to the callback one by one as expected. Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
Recently added code introduces 64-bit division in dr_icm_pool_mr_create() so that build on 32-bit architectures fails with ERROR: "__umoddi3" [drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko] undefined! As the divisor is always a power of 2, we can use bitwise operation instead. Fixes: 29cf8feb ("net/mlx5: DR, ICM pool memory allocator") Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tuong Lien authored
We have identified a problem with the "oversubscription" policy in the link transmission code. When small messages are transmitted, and the sending link has reached the transmit window limit, those messages will be bundled and put into the link backlog queue. However, bundles of data messages are counted at the 'CRITICAL' level, so that the counter for that level, instead of the counter for the real, bundled message's level is the one being increased. Subsequent, to-be-bundled data messages at non-CRITICAL levels continue to be tested against the unchanged counter for their own level, while contributing to an unrestrained increase at the CRITICAL backlog level. This leaves a gap in congestion control algorithm for small messages that can result in starvation for other users or a "real" CRITICAL user. Even that eventually can lead to buffer exhaustion & link reset. We fix this by keeping a 'target_bskb' buffer pointer at each levels, then when bundling, we only bundle messages at the same importance level only. This way, we know exactly how many slots a certain level have occupied in the queue, so can manage level congestion accurately. By bundling messages at the same level, we even have more benefits. Let consider this: - One socket sends 64-byte messages at the 'CRITICAL' level; - Another sends 4096-byte messages at the 'LOW' level; When a 64-byte message comes and is bundled the first time, we put the overhead of message bundle to it (+ 40-byte header, data copy, etc.) for later use, but the next message can be a 4096-byte one that cannot be bundled to the previous one. This means the last bundle carries only one payload message which is totally inefficient, as for the receiver also! Later on, another 64-byte message comes, now we make a new bundle and the same story repeats... With the new bundling algorithm, this will not happen, the 64-byte messages will be bundled together even when the 4096-byte message(s) comes in between. However, if the 4096-byte messages are sent at the same level i.e. 'CRITICAL', the bundling algorithm will again cause the same overhead. Also, the same will happen even with only one socket sending small messages at a rate close to the link transmit's one, so that, when one message is bundled, it's transmitted shortly. Then, another message comes, a new bundle is created and so on... We will solve this issue radically by another patch. Fixes: 365ad353 ("tipc: reduce risk of user starvation during link congestion") Reported-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dongli Zhang authored
xennet_fill_frags() uses ~0U as return value when the sk_buff is not able to cache extra fragments. This is incorrect because the return type of xennet_fill_frags() is RING_IDX and 0xffffffff is an expected value for ring buffer index. In the situation when the rsp_cons is approaching 0xffffffff, the return value of xennet_fill_frags() may become 0xffffffff which xennet_poll() (the caller) would regard as error. As a result, queue->rx.rsp_cons is set incorrectly because it is updated only when there is error. If there is no error, xennet_poll() would be responsible to update queue->rx.rsp_cons. Finally, queue->rx.rsp_cons would point to the rx ring buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL. This leads to NULL pointer access in the next iteration to process rx ring buffer entries. The symptom is similar to the one fixed in commit 00b36850 ("xen-netfront: do not assume sk_buff_head list is empty in error handling"). This patch changes the return type of xennet_fill_frags() to indicate whether it is successful or failed. The queue->rx.rsp_cons will be always updated inside this function. Fixes: ad4f15dc ("xen/netfront: don't bug in case of too many frags") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Rajendra reported a kernel panic when a link was taken down: [ 6870.263084] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 [ 6870.271856] IP: [<ffffffff8efc5764>] __ipv6_ifa_notify+0x154/0x290 <snip> [ 6870.570501] Call Trace: [ 6870.573238] [<ffffffff8efc58c6>] ? ipv6_ifa_notify+0x26/0x40 [ 6870.579665] [<ffffffff8efc98ec>] ? addrconf_dad_completed+0x4c/0x2c0 [ 6870.586869] [<ffffffff8efe70c6>] ? ipv6_dev_mc_inc+0x196/0x260 [ 6870.593491] [<ffffffff8efc9c6a>] ? addrconf_dad_work+0x10a/0x430 [ 6870.600305] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70 [ 6870.606732] [<ffffffff8ea93a7a>] ? process_one_work+0x18a/0x430 [ 6870.613449] [<ffffffff8ea93d6d>] ? worker_thread+0x4d/0x490 [ 6870.619778] [<ffffffff8ea93d20>] ? process_one_work+0x430/0x430 [ 6870.626495] [<ffffffff8ea99dd9>] ? kthread+0xd9/0xf0 [ 6870.632145] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70 [ 6870.638573] [<ffffffff8ea99d00>] ? kthread_park+0x60/0x60 [ 6870.644707] [<ffffffff8f01ae77>] ? ret_from_fork+0x57/0x70 [ 6870.650936] Code: 31 c0 31 d2 41 b9 20 00 08 02 b9 09 00 00 0 addrconf_dad_work is kicked to be scheduled when a device is brought up. There is a race between addrcond_dad_work getting scheduled and taking the rtnl lock and a process taking the link down (under rtnl). The latter removes the host route from the inet6_addr as part of addrconf_ifdown which is run for NETDEV_DOWN. The former attempts to use the host route in ipv6_ifa_notify. If the down event removes the host route due to the race to the rtnl, then the BUG listed above occurs. This scenario does not occur when the ipv6 address is not kept (net.ipv6.conf.all.keep_addr_on_down = 0) as addrconf_ifdown sets the state of the ifp to DEAD. Handle when the addresses are kept by checking IF_READY which is reset by addrconf_ifdown. The 'dead' flag for an inet6_addr is set only under rtnl, in addrconf_ifdown and it means the device is getting removed (or IPv6 is disabled). The interesting cases for changing the idev flag are addrconf_notify (NETDEV_UP and NETDEV_CHANGE) and addrconf_ifdown (reset the flag). The former does not have the idev lock - only rtnl; the latter has both. Based on that the existing dead + IF_READY check can be moved to right after the rtnl_lock in addrconf_dad_work. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Reported-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com> Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
The cited commit exposed an old retransmits_timed_out() bug which assumed it could call tcp_model_timeout() with TCP_RTO_MIN as rto_base for all states. But flows in SYN_SENT or SYN_RECV state uses a different RTO base (1 sec instead of 200 ms, unless BPF choses another value) This caused a reduction of SYN retransmits from 6 to 4 with the default /proc/sys/net/ipv4/tcp_syn_retries value. Fixes: a41e8a88 ("tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Marek Majkowski <marek@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dexuan Cui authored
Lockdep is unhappy if two locks from the same class are held. Fix the below warning for hyperv and virtio sockets (vmci socket code doesn't have the issue) by using lock_sock_nested() when __vsock_release() is called recursively: ============================================ WARNING: possible recursive locking detected 5.3.0+ #1 Not tainted -------------------------------------------- server/1795 is trying to acquire lock: ffff8880c5158990 (sk_lock-AF_VSOCK){+.+.}, at: hvs_release+0x10/0x120 [hv_sock] but task is already holding lock: ffff8880c5158150 (sk_lock-AF_VSOCK){+.+.}, at: __vsock_release+0x2e/0xf0 [vsock] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sk_lock-AF_VSOCK); lock(sk_lock-AF_VSOCK); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by server/1795: #0: ffff8880c5d05ff8 (&sb->s_type->i_mutex_key#10){+.+.}, at: __sock_release+0x2d/0xa0 #1: ffff8880c5158150 (sk_lock-AF_VSOCK){+.+.}, at: __vsock_release+0x2e/0xf0 [vsock] stack backtrace: CPU: 5 PID: 1795 Comm: server Not tainted 5.3.0+ #1 Call Trace: dump_stack+0x67/0x90 __lock_acquire.cold.67+0xd2/0x20b lock_acquire+0xb5/0x1c0 lock_sock_nested+0x6d/0x90 hvs_release+0x10/0x120 [hv_sock] __vsock_release+0x24/0xf0 [vsock] __vsock_release+0xa0/0xf0 [vsock] vsock_release+0x12/0x30 [vsock] __sock_release+0x37/0xa0 sock_close+0x14/0x20 __fput+0xc1/0x250 task_work_run+0x98/0xc0 do_exit+0x344/0xc60 do_group_exit+0x47/0xb0 get_signal+0x15c/0xc50 do_signal+0x30/0x720 exit_to_usermode_loop+0x50/0xa0 do_syscall_64+0x24e/0x270 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f4184e85f31 Tested-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Johan Hovold authored
Fix NULL-pointer dereference on tty open due to a failure to handle a missing interrupt-in endpoint when probing modem ports: BUG: kernel NULL pointer dereference, address: 0000000000000006 ... RIP: 0010:tiocmget_submit_urb+0x1c/0xe0 [hso] ... Call Trace: hso_start_serial_device+0xdc/0x140 [hso] hso_serial_open+0x118/0x1b0 [hso] tty_open+0xf1/0x490 Fixes: 542f5482 ("tty: Modem functions for the HSO driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Oct, 2019 25 commits
-
-
Oleksij Rempel authored
This patch is syncing driver with actual devicetree documentation: Documentation/devicetree/bindings/net/qca,ar71xx.txt |Optional subnodes: |- mdio : specifies the mdio bus, used as a container for phy nodes | according to phy.txt in the same directory The driver was working with fixed phy without any noticeable issues. This bug was uncovered by introducing dsa ar9331-switch driver. Since no one reported this bug until now, I assume no body is using it and this patch should not brake existing system. Fixes: d51b6ce4 ("net: ethernet: add ag71xx driver") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: Fixes for -net Misc fixes for -net tree. More info in commit logs. v2 is just a rebase of v1 against -net and we added a new patch (09/09) to fix RSS feature. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
Commit b6b6cc9a, changed the call to dwxgmac2_rss_write_reg() passing it the variable cfg->key[i]. As key is an u8 but we write 32 bits at a time we need to cast it into an u32 so that the correct key values are written. Notice that the for loop already takes this into account so we don't try to write past the keys size. Fixes: b6b6cc9a ("net: stmmac: selftest: avoid large stack usage") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
The sizeof(cfg->key) is != ARRAY_SIZE(cfg->key). Fix it. This warning is triggered when running with cc flag -Wsizeof-array-div. Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Nathan Chancellor <natechancellor@gmail.com> Fixes: 76067459 ("net: stmmac: Implement RSS and enable it in XGMAC core") Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
We don't use it anyway as XGMAC only supports polling for timestamp (in current SW implementation). This greatly reduces the system load by reducing the number of interrupts. Fixes: 2142754f ("net: stmmac: Add MAC related callbacks for XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
If WoL is enabled we can't really stop the PHY, otherwise we will not receive the WoL packet. Fix this by telling phylink that only the MAC is down and only stop the PHY if WoL is not enabled. Fixes: 74371272 ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
The case for PTPV2_EVENT requires event packets to be captured so add this setting to the list of enabled captures. Fixes: 891434b1 ("stmmac: add IEEE PTPv1 and PTPv2 support.") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
We need to always update the MAC Hash Filter so that previous entries are invalidated. Found out while running stmmac selftests. Fixes: b8ef7020 ("net: stmmac: add support for hash table size 128/256 in dwmac4") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
Although some XGMAC setups support frames larger than DMA size, some of them may not. As we can't know before-hand which ones support let's use the maximum DMA buffer size in the Jumbo Tests. User can always reconfigure the MTU to achieve larger frames. Fixes: 427849e8 ("net: stmmac: selftests: Add Jumbo Frame tests") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
Since commit b8ef7020 ("net: stmmac: add support for hash table size 128/256 in dwmac4"), we can detect the Hash Table dinamically. Let's implement this feature in XGMAC cores and fix possible setups that don't support the maximum size for Hash Table. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
Some setups may not have all Unicast addresses filters available. Let's check this before trying to setup filters. Fixes: 0efedbf1 ("net: stmmac: xgmac: Fix XGMAC selftests") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
If any of the param or info_get op returns error, dumpit cb is skipping to dump remaining params or info_get ops for all the drivers. Fix to not return if any of the param/info_get op returns error as not supported and continue to dump remaining information. v2: Modify the patch to return error, except for params/info_get op that return -EOPNOTSUPP as suggested by Andrew Lunn. Also, modify commit message to reflect the same. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wen Yang authored
of_node_put needs to be called when the device node which is got from of_get_child_by_name finished using. irq_domain_add_linear() also calls of_node_get() to increase refcount, so irq_domain will not be affected when it is released. Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wen Yang authored
of_node_put needs to be called when the device node which is got from of_get_child_by_name finished using. In both cases of success and failure, we need to release 'ports', so clean up the code using goto. fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
As explained in the "net: sched: taprio: Avoid division by zero on invalid link speed" commit, it is legal for the ethtool API to return zero as a link speed. So guard against it to ensure we don't perform a division by zero in kernel. Fixes: e0a7683d ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The check in taprio_set_picos_per_byte is currently not robust enough and will trigger this division by zero, due to e.g. PHYLINK not setting kset->base.speed when there is no PHY connected: [ 27.109992] Division by zero in kernel. [ 27.113842] CPU: 1 PID: 198 Comm: tc Not tainted 5.3.0-rc5-01246-gc4006b8c2637-dirty #212 [ 27.121974] Hardware name: Freescale LS1021A [ 27.126234] [<c03132e0>] (unwind_backtrace) from [<c030d8b8>] (show_stack+0x10/0x14) [ 27.133938] [<c030d8b8>] (show_stack) from [<c10b21b0>] (dump_stack+0xb0/0xc4) [ 27.141124] [<c10b21b0>] (dump_stack) from [<c10af97c>] (Ldiv0_64+0x8/0x18) [ 27.148052] [<c10af97c>] (Ldiv0_64) from [<c0700260>] (div64_u64+0xcc/0xf0) [ 27.154978] [<c0700260>] (div64_u64) from [<c07002d0>] (div64_s64+0x4c/0x68) [ 27.161993] [<c07002d0>] (div64_s64) from [<c0f3d890>] (taprio_set_picos_per_byte+0xe8/0xf4) [ 27.170388] [<c0f3d890>] (taprio_set_picos_per_byte) from [<c0f3f614>] (taprio_change+0x668/0xcec) [ 27.179302] [<c0f3f614>] (taprio_change) from [<c0f2bc24>] (qdisc_create+0x1fc/0x4f4) [ 27.187091] [<c0f2bc24>] (qdisc_create) from [<c0f2c0c8>] (tc_modify_qdisc+0x1ac/0x6f8) [ 27.195055] [<c0f2c0c8>] (tc_modify_qdisc) from [<c0ee9604>] (rtnetlink_rcv_msg+0x268/0x2dc) [ 27.203449] [<c0ee9604>] (rtnetlink_rcv_msg) from [<c0f4fef0>] (netlink_rcv_skb+0xe0/0x114) [ 27.211756] [<c0f4fef0>] (netlink_rcv_skb) from [<c0f4f6cc>] (netlink_unicast+0x1b4/0x22c) [ 27.219977] [<c0f4f6cc>] (netlink_unicast) from [<c0f4fa84>] (netlink_sendmsg+0x284/0x340) [ 27.228198] [<c0f4fa84>] (netlink_sendmsg) from [<c0eae5fc>] (sock_sendmsg+0x14/0x24) [ 27.235988] [<c0eae5fc>] (sock_sendmsg) from [<c0eaedf8>] (___sys_sendmsg+0x214/0x228) [ 27.243863] [<c0eaedf8>] (___sys_sendmsg) from [<c0eb015c>] (__sys_sendmsg+0x50/0x8c) [ 27.251652] [<c0eb015c>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 27.259524] Exception stack(0xe8045fa8 to 0xe8045ff0) [ 27.264546] 5fa0: b6f608c8 000000f8 00000003 bed7e2f0 00000000 00000000 [ 27.272681] 5fc0: b6f608c8 000000f8 004ce54c 00000128 5d3ce8c7 00000000 00000026 00505c9c [ 27.280812] 5fe0: 00000070 bed7e298 004ddd64 b6dd1e64 Russell King points out that the ethtool API says zero is a valid return value of __ethtool_get_link_ksettings: * If it is enabled then they are read-only; if the link * is up they represent the negotiated link mode; if the link is down, * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. So, it seems that taprio is not following the API... I'd suggest either fixing taprio, or getting agreement to change the ethtool API. The chosen path was to fix taprio. Fixes: 7b9eba7b ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
BH must be disabled when invoking nf_conncount_gc_list() to perform garbage collection, otherwise deadlock might happen. nf_conncount_add+0x1f/0x50 [nf_conncount] nft_connlimit_eval+0x4c/0xe0 [nft_connlimit] nft_dynset_eval+0xb5/0x100 [nf_tables] nft_do_chain+0xea/0x420 [nf_tables] ? sch_direct_xmit+0x111/0x360 ? noqueue_init+0x10/0x10 ? __qdisc_run+0x84/0x510 ? tcp_packet+0x655/0x1610 [nf_conntrack] ? ip_finish_output2+0x1a7/0x430 ? tcp_error+0x130/0x150 [nf_conntrack] ? nf_conntrack_in+0x1fc/0x4c0 [nf_conntrack] nft_do_chain_ipv4+0x66/0x80 [nf_tables] nf_hook_slow+0x44/0xc0 ip_rcv+0xb5/0xd0 ? ip_rcv_finish_core.isra.19+0x360/0x360 __netif_receive_skb_one_core+0x52/0x70 netif_receive_skb_internal+0x34/0xe0 napi_gro_receive+0xba/0xe0 e1000_clean_rx_irq+0x1e9/0x420 [e1000e] e1000e_poll+0xbe/0x290 [e1000e] net_rx_action+0x149/0x3b0 __do_softirq+0xde/0x2d8 irq_exit+0xba/0xc0 do_IRQ+0x85/0xd0 common_interrupt+0xf/0xf </IRQ> RIP: 0010:nf_conncount_gc_list+0x3b/0x130 [nf_conncount] Fixes: 2f971a8f ("netfilter: nf_conncount: move all list iterations under spinlock") Reported-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
commit 174e2381 ("sk_buff: drop all skb extensions on free and skb scrubbing") made napi recycle always drop skb extensions. The additional skb_ext_del() that is performed via nf_reset on napi skb recycle is not needed anymore. Most nf_reset() calls in the stack are there so queued skb won't block 'rmmod nf_conntrack' indefinitely. This removes the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). In a few selected places, add a call to skb_ext_reset to make sure that no active extensions remain. I am submitting this for "net", because we're still early in the release cycle. The patch applies to net-next too, but I think the rename causes needless divergence between those trees. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2019-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A small list of fixes this time: * two null pointer dereference fixes * a fix for preempt-enabled/BHs-enabled (lockdep) splats (that correctly pointed out a bug) * a fix for multi-BSSID ordering assumptions * a fix for the EDMG support, on-stack chandefs need to be initialized properly (now that they're bigger) * beacon (head) data from userspace should be validated ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
When no other driver selects the devlink library code, ionic produces a link failure: drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_alloc': ionic_devlink.c:(.text+0xd): undefined reference to `devlink_alloc' drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_register': ionic_devlink.c:(.text+0x71): undefined reference to `devlink_register' Add the same 'select' statement that the other drivers use here. Fixes: fbfb8031 ("ionic: Add hardware init and device commands") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Adam Zerella authored
Resolving a couple of Sphinx documentation warnings that are generated in the networking section. - WARNING: document isn't included in any toctree - WARNING: Title underline too short. Signed-off-by: Adam Zerella <adam.zerella@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Always acquire tx descriptor spinlock even if a xdp program is not loaded on the netsec device since ndo_xdp_xmit can run concurrently with netsec_netdev_start_xmit and netsec_clean_tx_dring. This can happen loading a xdp program on a different device (e.g virtio-net) and xdp_do_redirect_map/xdp_do_redirect_slow can redirect to netsec even if we do not have a xdp program on it. Fixes: ba2b2321 ("net: netsec: add XDP support") Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Drivers typically expect this, as it's the case for almost all cases where this is called (i.e. from the TX path). Also, the code in mac80211 itself (if the driver calls ieee80211_tx_dequeue()) expects this as it uses this_cpu_ptr() without additional protection. This should fix various reports of the problem: https://bugzilla.kernel.org/show_bug.cgi?id=204127 https://lore.kernel.org/linux-wireless/CAN5HydrWb3o_FE6A1XDnP1E+xS66d5kiEuhHfiGKkLNQokx13Q@mail.gmail.com/ https://lore.kernel.org/lkml/nycvar.YFH.7.76.1909111238470.473@cbobk.fhfr.pm/ Cc: stable@vger.kernel.org Reported-and-tested-by: Jiri Kosina <jkosina@suse.cz> Reported-by: Aaron Hill <aa1ronham@gmail.com> Reported-by: Lukas Redlinger <rel+kernel@agilox.net> Reported-by: Oleksii Shevchuk <alxchk@gmail.com> Fixes: 21a5d4c3 ("mac80211: add stop/start logic for software TXQs") Link: https://lore.kernel.org/r/1569928763-I3e8838c5ecad878e59d4a94eb069a90f6641461a@changeidReviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Miaoqing Pan authored
If the interface type is P2P_DEVICE or NAN, read the file of '/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a NULL pointer dereference. As for those interface type, the pointer sdata->vif.txq is NULL. Unable to handle kernel NULL pointer dereference at virtual address 00000011 CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1 task: ffffffc0337e4880 task.stack: ffffff800cd20000 PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [...] Process cat (pid: 30936, stack limit = 0xffffff800cd20000) [...] [<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211] [<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211] [<ffffff80082eff94>] full_proxy_read+0x2c/0x48 [<ffffff80081eef00>] __vfs_read+0x2c/0xd4 [<ffffff80081ef084>] vfs_read+0x8c/0x108 [<ffffff80081ef494>] SyS_read+0x40/0x7c Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/1569549796-8223-1-git-send-email-miaoqing@codeaurora.org [trim useless data from commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Miaoqing Pan authored
If the interface is not in MESH mode, the command 'iw wlanx mpath del' will cause kernel panic. The root cause is null pointer access in mpp_flush_by_proxy(), as the pointer 'sdata->u.mesh.mpp_paths' is NULL for non MESH interface. Unable to handle kernel NULL pointer dereference at virtual address 00000068 [...] PC is at _raw_spin_lock_bh+0x20/0x5c LR is at mesh_path_del+0x1c/0x17c [mac80211] [...] Process iw (pid: 4537, stack limit = 0xd83e0238) [...] [<c021211c>] (_raw_spin_lock_bh) from [<bf8c7648>] (mesh_path_del+0x1c/0x17c [mac80211]) [<bf8c7648>] (mesh_path_del [mac80211]) from [<bf6cdb7c>] (extack_doit+0x20/0x68 [compat]) [<bf6cdb7c>] (extack_doit [compat]) from [<c05c309c>] (genl_rcv_msg+0x274/0x30c) [<c05c309c>] (genl_rcv_msg) from [<c05c25d8>] (netlink_rcv_skb+0x58/0xac) [<c05c25d8>] (netlink_rcv_skb) from [<c05c2e14>] (genl_rcv+0x20/0x34) [<c05c2e14>] (genl_rcv) from [<c05c1f90>] (netlink_unicast+0x11c/0x204) [<c05c1f90>] (netlink_unicast) from [<c05c2420>] (netlink_sendmsg+0x30c/0x370) [<c05c2420>] (netlink_sendmsg) from [<c05886d0>] (sock_sendmsg+0x70/0x84) [<c05886d0>] (sock_sendmsg) from [<c0589f4c>] (___sys_sendmsg.part.3+0x188/0x228) [<c0589f4c>] (___sys_sendmsg.part.3) from [<c058add4>] (__sys_sendmsg+0x4c/0x70) [<c058add4>] (__sys_sendmsg) from [<c0208c80>] (ret_fast_syscall+0x0/0x44) Code: e2822c02 e2822001 e5832004 f590f000 (e1902f9f) ---[ end trace bbd717600f8f884d ]--- Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Link: https://lore.kernel.org/r/1569485810-761-1-git-send-email-miaoqing@codeaurora.org [trim useless data from commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-