- 14 Jul, 2008 1 commit
-
-
Russell King authored
This includes PXA work up to the SPI changes for the initial merge, since e172274c depends on the SPI tree being merged. Conflicts: arch/arm/configs/em_x270_defconfig arch/arm/configs/xm_x270_defconfig
-
- 10 Jul, 2008 5 commits
-
-
Russell King authored
Conflicts: arch/arm/mm/Kconfig
-
Russell King authored
Merge branches 'at91', 'dyntick', 'ep93xx', 'iop', 'ixp', 'misc', 'orion', 'omap-reviewed', 'rpc', 'rtc' and 's3c' into devel
-
Dmitry Baryshkov authored
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
sedji gaouaou authored
at91sam9g20 defconfig file Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
sedji gaouaou authored
Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 09 Jul, 2008 11 commits
-
-
Arnaud Patard authored
This patch brings support for gpio/gpiolib framework to Intel IOP3xx platforms. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Patrice Vilchez authored
[ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits. New timings are based on application note "NAND Flash Support on AT91SAM9 Microcontrollers" available at http://atmel.com/dyn/resources/prod_documents/doc6255.pdf). Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Mark Brown authored
The Zylonite has an AC97 subsystem on it so register the AC97 controller device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Mark Brown authored
As well as moving all the device declarations to a single one in devices.c this causes all platforms to register the I/O and interrupt resources for the AC97 controller. Cc: eric miao <eric.miao@marvell.com> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Jürgen Schindele <linux@schindele.name> Cc: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Philipp Zabel authored
The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform driver name changes from pxa2xx-udc to pxa25x-udc) and the platform driver name of pxa27x_udc.c is fixed to pxa27x-udc. pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors and the pxa27x_device_udc is enabled in pxa27x.c. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Including from Ian Molton: Fixes for mistakes left over from the PXA2{5,7}X UDC split. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Dmitry Baryshkov authored
is handled in board code Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Dmitry Baryshkov authored
Provide a set of functions to control state of pins dedicated to IrDA. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Dmitry Baryshkov authored
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
pxa_set_cken() is now unused, remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
-
Russell King authored
We need to support more than one name+device for a struct clk for a small number of peripherals. We do this by re-using struct clk alias to another struct clk - IOW, if we find that the entry we're using is an alias, we return the aliased entry not the one we found. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 07 Jul, 2008 23 commits
-
-
Saeed Bishara authored
On Feroceon platforms that have a branch prediction unit, bit 11 of the cp15 control register controls the BPU. This patch keeps the old value of this bit instead of always clearing it. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
-
Martin Michlmayr authored
The HP mv2120 has several LEDs that are controlled through gpio. Export the health LED, the red SATA LEDs as well as two gpios that control the brightness of _all_ LEDs to userland. The Ethernet and power LEDs can't be controlled through gpio and the blue SATA LEDs are handled via the SATA driver. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
-
Nicolas Pitre authored
This patch adds support for the Marvell Orion-VoIP RD-88F5181L-FXO Reference Design, and enables use of the ethernet, USB, Cardbus and mini-PCIe ports. Signed-off-by: Nicolas Pitre <nico@marvell.com>
-
Lennert Buytenhek authored
This patch adds support for the Marvell Orion-VoIP RD2-88F5181L-GE Reference Design, and enables use of the ethernet, USB, Cardbus and mini-PCIe ports. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
-
Imre Kaloz authored
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
-
Russell King authored
-
Ben Dooks authored
Update the s3c2410_defconfig for the current set of added patches. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Minor style fixes. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Christer Weinigel authored
Initialise the hardware register settings on boot, to allow the device to function correctly. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Christer Weinigel authored
This patch adds the configuration needed for the LCD display on the n30. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Christer Weinigel authored
Add support for the Acer N35 and related devices. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Christer Weinigel authored
Add support for the LEDs on the Acer N30. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Christer Weinigel authored
Add support for the GPIO buttons on the Acer N30. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Christer Weinigel authored
Add support for the USB D+ pull up on the Acer N30. This is needed for the USB gadget to work properly. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Christer Weinigel authored
Clean up some junk from the official kernel. The compile-command is something that's only useful for me personally and doesn't belong in the mainstream kernel. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Update the S3C2443 clock support to add the prediv clock that is sourced via a divider from msysclk. Also fix the setting of p and h clocks from this prediv clock. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Add the armdiv and arm clocks to the S3C2443 clock framework and ensure they are correctly setup. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
s3c2443_clkcon_enable_p() was reading from the correct register S3C2443_PCLKCON, but then writing the value back to the wrong register S3C2443_HCLKCON. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ramax Lo authored
Add DM9000AEP network controller support for AT2440EVB. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ramax Lo authored
Add basic support for AT2440EVB board based on Samsung S3C2440 SoC. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
-
Russell King authored
-
Russell King authored
Update mach-types. Remove invalid or incorrect entries. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Stefan Schmidt authored
Warn people when using pxa2xx-gpio.h as it is only here for backwards compatibility. The new mfp-pxa2[57]x.h and the relevant API should be used instead. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-