- 23 May, 2010 8 commits
-
-
Ben Dooks authored
Update the s5p6440_defconfig to the latest kernel version v2.6.34 Signed-off-by:Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Update the s3c6400_defconfig to the latest kernel version v2.6.34 Signed-off-by: -
Ben Dooks authored
Update the s3c2410_defconfig to the latest kernel version v2.6.34 Signed-off-by: -
Ben Dooks authored
Fixup the defconfig post the latest moves, so ARCH_S5PC1XX becomes ARCH_S5PC100 which is sufficient to get the system building. Signed-off-by: -
Ben Dooks authored
Between problems with Kconfig and merging commits from several different sources, it seems the s5pc100 build's move from plat-s5pc11 has had a few problems. Since I do not have the trees to rebuild this quickly, the easiest thing is to simply fix the errors found once the s5pc100_defconfig actually builds. Signed-off-by: -
Jassi Brar authored
Samsung's Soc S5PC100 has three PL330 DMACs. First is dedicated for Memory->Memory data transfer while the other two meant for data transfer with peripherals. Define and add latter two PL330 DMACs as platform devices on the S5PC100 platform. Signed-off-by:
Jassi Brar <jassi.brar@samsung.com> Signed-off-by:
-
Ben Dooks authored
Somewhere during the latest platform cleanups the IRQ_EINT definition got broken, so fix it by replacing it in <mach/irqs.h> Signed-off-by: -
Pinkava J authored
When saving GPIOs during suspend/resume we need skip missing GPIO banks, not trying get corresponding chip again and again in infinite loop. Signed-off-by:
Jiri Pinkava <jiri.pinkava@vscht.cz> [ben-linux@fluff.org: shorten subject] Signed-off-by:
-
- 20 May, 2010 32 commits
-
-
Ben Dooks authored
Use the new wakeup mask synchronisation code to set the relevant wakeup mask bits. Signed-off-by: -
Ben Dooks authored
Add support for wakeup-mask style interrupts that share a single mask register for various different interrupts. This registers a set of interrupt->bit mappings and the register they belong to. Signed-off-by: -
Ben Dooks authored
Change local_irq disable calls to use spinlocks to ensure that the ADC driver data is protected against multiple access.. Note, this does not protect the client's data, and the client should ensure it does not make multiple calls to the ADC driver. Signed-off-by: -
Ben Dooks authored
Add the new locking calls to ensure that these are always exclusively accessing the GPIO registers. Fixes a possible race between two threads modifying the same GPIO bank, Signed-off-by: -
Ben Dooks authored
Add temporary <mach/regs-fb.h> until the new framebuffer driver can be merged. Signed-off-by: -
Ben Dooks authored
Ensure the ADC device is touched only if S3C_DEV_ADC is selected. Fixes: arch/arm/mach-s5pv210/built-in.o: In function `s5pv210_map_io': /home/kgene/bjdooks/arch/arm/mach-s5pv210/cpu.c:92: undefined reference to `s3c_device_adc' Signed-off-by: -
Ben Dooks authored
Fixup merge which re-introduced the setup-i2c0 helper Signed-off-by: -
Ben Dooks authored
Fixup commit 5cfc8ee0 which introduced ARCH_USES_GETTIMEOFFSET but missed out several S5P architectures. Signed-off-by:
-
Ben Dooks authored
Merge branch 'for-2635-4/onenand' into for-2635-4/partial2 Conflicts: arch/arm/mach-s5pc100/cpu.c arch/arm/mach-s5pc100/include/mach/map.h arch/arm/mach-s5pv210/Makefile
-
Ben Dooks authored
Merge branch 'for-2635-4/watchdog' into for-2635-4/partial2 Conflicts: arch/arm/mach-s3c64xx/mach-smdk6410.c arch/arm/mach-s5p6440/Kconfig arch/arm/mach-s5p6440/include/mach/map.h arch/arm/mach-s5p6440/mach-smdk6440.c arch/arm/mach-s5pv210/Kconfig arch/arm/mach-s5pv210/include/mach/map.h arch/arm/mach-s5pv210/mach-smdkv210.c
-
Banajit Goswami authored
This patch adds support for Watchdog timer for Samsung S5PV210. Signed-off-by:
Banajit Goswami <banajit.g@samsung.com> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Banajit Goswami authored
This patch adds support for Watchdog timer for Samsung S5P6440. Signed-off-by:
-
Banajit Goswami authored
This patch adds support for Watchdog timer for Samsung S3C6410 Signed-off-by:
-
Banajit Goswami authored
This patch moves the definitions of watchdog timer device from plat-s3c24xx to plat-samsung. This will enable all Samsung S3C and S5P series SoC's to use common WDT device definition. Signed-off-by:
-
Maurus Cuelenaere authored
This adds new machine definitions for the SmartQ 5 and 7. Signed-off-by:
Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by:
-
Ben Dooks authored
Merge branch 'for-2635-4/spi-devs' into for-2635-4/partial2 Conflicts: arch/arm/mach-s5pc100/include/mach/map.h arch/arm/mach-s5pv210/Makefile
-
Ben Dooks authored
Merge branch 'for-2635-4/s5p-devs' into for-2635-4/partial2 Conflicts: arch/arm/mach-s5pc100/include/mach/map.h
-
Jassi Brar authored
Define SPI platform devices for the SoC. Signed-off-by:
-
Jassi Brar authored
Define SPI platform devices for the SoC. Signed-off-by:
-
Jassi Brar authored
Define SPI platform devices for the SoC. Signed-off-by:
-
Jassi Brar authored
Define SPI platform devices for the SoC. Signed-off-by:
-
Jassi Brar authored
Add audio platform devices on the smdk by default. Signed-off-by:
-
Jassi Brar authored
Define platform devices for all audio devices found on S5PC100 Signed-off-by:
-
Ben Dooks authored
Merge branch 'for-2635-4/s5pv210-boards' into for-2635-4/partial1 Conflicts: arch/arm/mach-s5pv210/include/mach/map.h
-
Ben Dooks authored
Merge branch 'for-2635-4/ts-machines' into for-2635-4/partial1
-
Ben Dooks authored
Merge branch 'for-2635-4/s5pc1xx-removal' into for-2635-4/partial1
-
Ben Dooks authored
Update the Kconfig order and add a spacer between device setup support and the machine definitions. Signed-off-by: -
Joonyoung Shim authored
This is for samsung GONI board using s5pc110. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
This patch adds sdhci platform helpers required by sdhci-s3c driver. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
This patch adds I2C platform helpers required by s3c2440-i2c driver. Signed-off-by:
-
Marek Szyprowski authored
This patch adds common framebuffer device helpers and register defines for S5PV210 based machines. Signed-off-by:
-
Marek Szyprowski authored
This patch adds setup code for Samsung OneNAND controller driver. The driver needs to be aware on which SoC it is running, so the actual device id is being changed in cpu init code. S3C64xx SoCs have 2 OneNAND controllers while S5PC100 and S5PC110 has only one. Signed-off-by:
-
