1. 16 Jul, 2010 1 commit
  2. 15 Jul, 2010 3 commits
    • Jan Kara's avatar
      jbd2/ocfs2: Fix block checksumming when a buffer is used in several transactions · 13ceef09
      Jan Kara authored
      OCFS2 uses t_commit trigger to compute and store checksum of the just
      committed blocks. When a buffer has b_frozen_data, checksum is computed
      for it instead of b_data but this can result in an old checksum being
      written to the filesystem in the following scenario:
      
      1) transaction1 is opened
      2) handle1 is opened
      3) journal_access(handle1, bh)
          - This sets jh->b_transaction to transaction1
      4) modify(bh)
      5) journal_dirty(handle1, bh)
      6) handle1 is closed
      7) start committing transaction1, opening transaction2
      8) handle2 is opened
      9) journal_access(handle2, bh)
          - This copies off b_frozen_data to make it safe for transaction1 to commit.
            jh->b_next_transaction is set to transaction2.
      10) jbd2_journal_write_metadata() checksums b_frozen_data
      11) the journal correctly writes b_frozen_data to the disk journal
      12) handle2 is closed
          - There was no dirty call for the bh on handle2, so it is never queued for
            any more journal operation
      13) Checkpointing finally happens, and it just spools the bh via normal buffer
      writeback.  This will write b_data, which was never triggered on and thus
      contains a wrong (old) checksum.
      
      This patch fixes the problem by calling the trigger at the moment data is
      frozen for journal commit - i.e., either when b_frozen_data is created by
      do_get_write_access or just before we write a buffer to the log if
      b_frozen_data does not exist. We also rename the trigger to t_frozen as
      that better describes when it is called.
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      Signed-off-by: default avatarMark Fasheh <mfasheh@suse.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      13ceef09
    • Wengang Wang's avatar
      ocfs2/dlm: Remove BUG_ON from migration in the rare case of a down node · a39953dd
      Wengang Wang authored
      For migration, we are waiting for DLM_LOCK_RES_MIGRATING flag to be set
      before sending DLM_MIG_LOCKRES_MSG message to the target. We are using
      dlm_migration_can_proceed() for that purpose.  However, if the node is
      down, dlm_migration_can_proceed() will also return "go ahead".  In this
      rare case, the DLM_LOCK_RES_MIGRATING flag might not be set yet. Remove
      the BUG_ON() that trips over this condition.
      Signed-off-by: default avatarWengang Wang <wen.gang.wang@oracle.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      a39953dd
    • Tao Ma's avatar
      ocfs2: Don't duplicate pages past i_size during CoW. · f5e27b6d
      Tao Ma authored
      During CoW, the pages after i_size don't contain valid data, so there's
      no need to read and duplicate them.
      Signed-off-by: default avatarTao Ma <tao.ma@oracle.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      f5e27b6d
  3. 12 Jul, 2010 6 commits
    • Dan Carpenter's avatar
      ocfs2: tighten up strlen() checking · e372357b
      Dan Carpenter authored
      This function is only called from one place and it's like this:
      	dlm_register_domain(conn->cc_name, dlm_key, &fs_version);
      
      The "conn->cc_name" is 64 characters long.  If strlen(conn->cc_name)
      were equal to O2NM_MAX_NAME_LEN (64) that would be a bug because
      strlen() doesn't count the NULL character.
      
      In fact, if you look how O2NM_MAX_NAME_LEN is used, it mostly describes
      64 character buffers.  The only exception is nd_name from struct
      o2nm_node.
      
      Anyway I looked into it and in this case the domain string comes from
      osb->uuid_str in ocfs2_setup_osb_uuid().  That's 32 characters and NULL
      which easily fits into O2NM_MAX_NAME_LEN.  This patch doesn't change how
      the code works, but I think it makes the code a little cleaner.
      Signed-off-by: default avatarDan Carpenter <error27@gmail.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      e372357b
    • Tao Ma's avatar
      ocfs2: Make xattr reflink work with new local alloc reservation. · 121a39bb
      Tao Ma authored
      The new reservation code in local alloc has add the limitation
      that the caller should handle the case that the local alloc
      doesn't give use enough contiguous clusters. It make the old
      xattr reflink code broken.
      
      So this patch udpate the xattr reflink code so that it can
      handle the case that local alloc give us one cluster at a time.
      Signed-off-by: default avatarTao Ma <tao.ma@oracle.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      121a39bb
    • Tao Ma's avatar
      ocfs2: make xattr extension work with new local alloc reservation. · a78f9f46
      Tao Ma authored
      The old ocfs2_xattr_extent_allocation is too optimistic about
      the clusters we can get. So actually if the file system is
      too fragmented, ocfs2_add_clusters_in_btree will return us
      with EGAIN and we need to allocate clusters once again.
      
      So this patch change it to a while loop so that we can allocate
      clusters until we reach clusters_to_add.
      Signed-off-by: default avatarTao Ma <tao.ma@oracle.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      Cc: stable@kernel.org
      a78f9f46
    • Tao Ma's avatar
      ocfs2: Remove the redundant cpu_to_le64. · 0a463b74
      Tao Ma authored
      In ocfs2_block_group_alloc, we set c_blkno by bg->bg_blkno.
      But actually bg->bg_blkno is already changed to little endian
      in ocfs2_block_group_fill. So remove the extra cpu_to_le64.
      Reported-by: default avatarMarcos Matsunaga <Marcos.Matsunaga@oracle.com>
      Signed-off-by: default avatarTao Ma <tao.ma@oracle.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      0a463b74
    • Wengang Wang's avatar
      ocfs2/dlm: don't access beyond bitmap size · f471c9df
      Wengang Wang authored
      dlm->recovery_map is defined as
      	unsigned long recovery_map[BITS_TO_LONGS(O2NM_MAX_NODES)];
      
      We should treat O2NM_MAX_NODES as the bit map size in bits.
      This patches fixes a bit operation that takes O2NM_MAX_NODES + 1 as bitmap size.
      Signed-off-by: default avatarWengang Wang <wen.gang.wang@oracle.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      f471c9df
    • Joel Becker's avatar
      ocfs2: No need to zero pages past i_size. · 693c241a
      Joel Becker authored
      When ocfs2 fills a hole, it does so by allocating clusters.  When a
      cluster is larger than the write, ocfs2 must zero the portions of the
      cluster outside of the write.  If the clustersize is smaller than a
      pagecache page, this is handled by the normal pagecache mechanisms, but
      when the clustersize is larger than a page, ocfs2's write code will zero
      the pages adjacent to the write.  This makes sure the entire cluster is
      zeroed correctly.
      
      Currently ocfs2 behaves exactly the same when writing past i_size.
      However, this means ocfs2 is writing zeroed pages for portions of a new
      cluster that are beyond i_size.  The page writeback code isn't expecting
      this.  It treats all pages past the one containing i_size as left behind
      due to a previous truncate operation.
      
      Thankfully, ocfs2 calculates the number of pages it will be working on
      up front.  The rest of the write code merely honors the original
      calculation.  We can simply trim the number of pages to only cover the
      actual file data.
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      Cc: stable@kernel.org
      693c241a
  4. 08 Jul, 2010 2 commits
    • Joel Becker's avatar
      ocfs2: Zero the tail cluster when extending past i_size. · 5693486b
      Joel Becker authored
      ocfs2's allocation unit is the cluster.  This can be larger than a block
      or even a memory page.  This means that a file may have many blocks in
      its last extent that are beyond the block containing i_size.  There also
      may be more unwritten extents after that.
      
      When ocfs2 grows a file, it zeros the entire cluster in order to ensure
      future i_size growth will see cleared blocks.  Unfortunately,
      block_write_full_page() drops the pages past i_size.  This means that
      ocfs2 is actually leaking garbage data into the tail end of that last
      cluster.  This is a bug.
      
      We adjust ocfs2_write_begin_nolock() and ocfs2_extend_file() to detect
      when a write or truncate is past i_size.  They will use
      ocfs2_zero_extend() to ensure the data is properly zeroed.
      
      Older versions of ocfs2_zero_extend() simply zeroed every block between
      i_size and the zeroing position.  This presumes three things:
      
      1) There is allocation for all of these blocks.
      2) The extents are not unwritten.
      3) The extents are not refcounted.
      
      (1) and (2) hold true for non-sparse filesystems, which used to be the
      only users of ocfs2_zero_extend().  (3) is another bug.
      
      Since we're now using ocfs2_zero_extend() for sparse filesystems as
      well, we teach ocfs2_zero_extend() to check every extent between
      i_size and the zeroing position.  If the extent is unwritten, it is
      ignored.  If it is refcounted, it is CoWed.  Then it is zeroed.
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      Cc: stable@kernel.org
      5693486b
    • Joel Becker's avatar
      ocfs2: When zero extending, do it by page. · a4bfb4cf
      Joel Becker authored
      ocfs2_zero_extend() does its zeroing block by block, but it calls a
      function named ocfs2_write_zero_page().  Let's have
      ocfs2_write_zero_page() handle the page level.  From
      ocfs2_zero_extend()'s perspective, it is now page-at-a-time.
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      Cc: stable@kernel.org
      a4bfb4cf
  5. 15 Jun, 2010 3 commits
    • Tao Ma's avatar
      ocfs2: Limit default local alloc size within bitmap range. · 1739da40
      Tao Ma authored
      In commit 6b82021b, we increase
      our local alloc size and calculate how much megabytes we can
      get according to group size and volume size.
      But we also need to check the maximum bits a local alloc block
      bitmap can have. With a bs=512, cs=32K, local volume with 160G,
      it calculate 96MB while the maximum local alloc size is only
      76M. So the bitmap will overflow and corrupt the system truncate
      log file. See bug
      http://oss.oracle.com/bugzilla/show_bug.cgi?id=1262Signed-off-by: default avatarTao Ma <tao.ma@oracle.com>
      Acked-by: default avatarMark Fasheh <mfasheh@suse.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      1739da40
    • Tao Ma's avatar
      ocfs2: Move orphan scan work to ocfs2_wq. · 40f165f4
      Tao Ma authored
      We used to let orphan scan work in the default work queue,
      but there is a corner case which will make the system deadlock.
      The scenario is like this:
      1. set heartbeat threadshold to 200. this will allow us to have a
         great chance to have a orphan scan work before our quorum decision.
      2. mount node 1.
      3. after 1~2 minutes, mount node 2(in order to make the bug easier
         to reproduce, better add maxcpus=1 to kernel command line).
      4. node 1 do orphan scan work.
      5. node 2 do orphan scan work.
      6. node 1 do orphan scan work. After this, node 1 hold the orphan scan
         lock while node 2 know node 1 is the master.
      7. ifdown eth2 in node 2(eth2 is what we do ocfs2 interconnection).
      
      Now when node 2 begins orphan scan, the system queue is blocked.
      
      The root cause is that both orphan scan work and quorum decision work
      will use the system event work queue. orphan scan has a chance of
      blocking the event work queue(in dlm_wait_for_node_death) so that there
      is no chance for quorum decision work to proceed.
      
      This patch resolve it by moving orphan scan work to ocfs2_wq.
      Signed-off-by: default avatarTao Ma <tao.ma@oracle.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      40f165f4
    • Julia Lawall's avatar
      fs/ocfs2/dlm: Add missing spin_unlock · 6469272c
      Julia Lawall authored
      Add a spin_unlock missing on the error path.  Unlock as in the other code
      that leads to the leave label.
      
      The semantic match that finds this problem is as follows:
      (http://coccinelle.lip6.fr/)
      
      // <smpl>
      @@
      expression E1;
      @@
      
      * spin_lock(E1,...);
        <+... when != E1
        if (...) {
          ... when != E1
      *   return ...;
        }
        ...+>
      * spin_unlock(E1,...);
      // </smpl>
      Signed-off-by: default avatarJulia Lawall <julia@diku.dk>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      6469272c
  6. 12 Jun, 2010 1 commit
  7. 11 Jun, 2010 24 commits