In gsi_channel_stop(), there's a check to see if the channel might
have entered STOPPED state since a previous call, which might have
timed out before stopping completed.

That check actually belongs in gsi_channel_stop_command(), which is
called repeatedly by gsi_channel_stop() for RX channels.

Fixes: 650d1603 ("soc: qcom: ipa: the generic software interface")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When support for short preambles was added, it incorrectly keyed its
decision off state->speed instead of state->interface.  state->speed
is not guaranteed to be correct for in-band modes, which can lead to
short preambles being unexpectedly disabled.

Fix this by keying off the interface mode, which is the only way that
mvneta can operate at 2.5Gbps.

Fixes: da58a931 ("net: mvneta: Add support for 2500Mbps SGMII")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jason A. Donenfeld says:

====================
support AF_PACKET for layer 3 devices

Hans reported that packets injected by a correct-looking and trivial
libpcap-based program were not being accepted by wireguard. In
investigating that, I noticed that a few devices weren't properly
handling AF_PACKET-injected packets, and so this series introduces a bit
of shared infrastructure to support that.

The basic problem begins with socket(AF_PACKET, SOCK_RAW,
htons(ETH_P_ALL)) sockets. When sendto is called, AF_PACKET examines the
headers of the packet with this logic:

static void packet_parse_headers(struct sk_buff *skb, struct socket *sock)
{
    if ((!skb->protocol || skb->protocol == htons(ETH_P_ALL)) &&
        sock->type == SOCK_RAW) {
        skb_reset_mac_header(skb);
        skb->protocol = dev_parse_header_protocol(skb);
    }

    skb_probe_transport_header(skb);
}

The middle condition there triggers, and we jump to
dev_parse_header_protocol. Note that this is the only caller of
dev_parse_header_protocol in the kernel, and I assume it was designed
for this purpose:

static inline __be16 dev_parse_header_protocol(const struct sk_buff *skb)
{
    const struct net_device *dev = skb->dev;

    if (!dev->header_ops || !dev->header_ops->parse_protocol)
        return 0;
    return dev->header_ops->parse_protocol(skb);
}

Since AF_PACKET already knows which netdev the packet is going to, the
dev_parse_header_protocol function can see if that netdev has a way it
prefers to figure out the protocol from the header. This, again, is the
only use of parse_protocol in the kernel. At the moment, it's only used
with ethernet devices, via eth_header_parse_protocol. This makes sense,
as mostly people are used to AF_PACKET-injecting ethernet frames rather
than layer 3 frames. But with nothing in place for layer 3 netdevs, this
function winds up returning 0, and skb->protocol then is set to 0, and
then by the time it hits the netdev's ndo_start_xmit, the driver doesn't
know what to do with it.

This is a problem because drivers very much rely on skb->protocol being
correct, and routinely reject packets where it's incorrect. That's why
having this parsing happen for injected packets is quite important. In
wireguard, ipip, and ipip6, for example, packets from AF_PACKET are just
dropped entirely. For tun devices, it's sort of uglier, with the tun
"packet information" header being passed to userspace containing a bogus
protocol value. Some userspace programs are ill-equipped to deal with
that. (But of course, that doesn't happen with tap devices, which
benefit from the similar shared infrastructure for layer 2 netdevs,
further motiviating this patchset for layer 3 netdevs.)

This patchset addresses the issue by first adding a layer 3 header parse
function, much akin to the existing one for layer 2 packets, and then
adds a shared header_ops structure that, also much akin to the existing
one for layer 2 packets. Then it wires it up to a few immediate places
that stuck out as requiring it, and does a bit of cleanup.

This patchset seems like it's fixing real bugs, so it might be
appropriate for stable. But they're also very old bugs, so if you'd
rather not backport to stable, that'd make sense to me too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The xfrm interface uses skb->protocol to determine packet type, and
bails out if it's not set. For AF_PACKET injection, we need to support
its call chain of:

    packet_sendmsg -> packet_snd -> packet_parse_headers ->
      dev_parse_header_protocol -> parse_protocol

Without a valid parse_protocol, this returns zero, and xfrmi rejects the
skb. So, this wires up the ip_tunnel handler for layer 3 packets for
that case.
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sit uses skb->protocol to determine packet type, and bails out if it's
not set. For AF_PACKET injection, we need to support its call chain of:

    packet_sendmsg -> packet_snd -> packet_parse_headers ->
      dev_parse_header_protocol -> parse_protocol

Without a valid parse_protocol, this returns zero, and sit rejects the
skb. So, this wires up the ip_tunnel handler for layer 3 packets for
that case.
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vti uses skb->protocol to determine packet type, and bails out if it's
not set. For AF_PACKET injection, we need to support its call chain of:

    packet_sendmsg -> packet_snd -> packet_parse_headers ->
      dev_parse_header_protocol -> parse_protocol

Without a valid parse_protocol, this returns zero, and vti rejects the
skb. So, this wires up the ip_tunnel handler for layer 3 packets for
that case.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tun driver passes up skb->protocol to userspace in the form of PI headers.
For AF_PACKET injection, we need to support its call chain of:

    packet_sendmsg -> packet_snd -> packet_parse_headers ->
      dev_parse_header_protocol -> parse_protocol

Without a valid parse_protocol, this returns zero, and the tun driver
then gives userspace bogus values that it can't deal with.

Note that this isn't the case with tap, because tap already benefits
from the shared infrastructure for ethernet headers. But with tun,
there's nothing.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that wg_examine_packet_protocol has been added for general
consumption as ip_tunnel_parse_protocol, it's possible to remove
wg_examine_packet_protocol and simply use the new
ip_tunnel_parse_protocol function directly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

WireGuard uses skb->protocol to determine packet type, and bails out if
it's not set or set to something it's not expecting. For AF_PACKET
injection, we need to support its call chain of:

    packet_sendmsg -> packet_snd -> packet_parse_headers ->
      dev_parse_header_protocol -> parse_protocol

Without a valid parse_protocol, this returns zero, and wireguard then
rejects the skb. So, this wires up the ip_tunnel handler for layer 3
packets for that case.
Reported-by: Hans Wippel <ndev@hwipl.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ipip uses skb->protocol to determine packet type, and bails out if it's
not set. For AF_PACKET injection, we need to support its call chain of:

    packet_sendmsg -> packet_snd -> packet_parse_headers ->
      dev_parse_header_protocol -> parse_protocol

Without a valid parse_protocol, this returns zero, and ipip rejects the
skb. So, this wires up the ip_tunnel handler for layer 3 packets for
that case.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some devices that take straight up layer 3 packets benefit from having a
shared header_ops so that AF_PACKET sockets can inject packets that are
recognized. This shared infrastructure will be used by other drivers
that currently can't inject packets using AF_PACKET. It also exposes the
parser function, as it is useful in standalone form too.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

genl_family_rcv_msg_attrs_parse() reuses the global family->attrbuf
when family->parallel_ops is false. However, family->attrbuf is not
protected by any lock on the genl_family_rcv_msg_doit() code path.

This leads to several different consequences, one of them is UAF,
like the following:

genl_family_rcv_msg_doit():		genl_start():
					  genl_family_rcv_msg_attrs_parse()
					    attrbuf = family->attrbuf
					    __nlmsg_parse(attrbuf);
  genl_family_rcv_msg_attrs_parse()
    attrbuf = family->attrbuf
    __nlmsg_parse(attrbuf);
					  info->attrs = attrs;
					  cb->data = info;

netlink_unicast_kernel():
 consume_skb()
					genl_lock_dumpit():
					  genl_dumpit_info(cb)->attrs

Note family->attrbuf is an array of pointers to the skb data, once
the skb is freed, any dereference of family->attrbuf will be a UAF.

Maybe we could serialize the family->attrbuf with genl_mutex too, but
that would make the locking more complicated. Instead, we can just get
rid of family->attrbuf and always allocate attrbuf from heap like the
family->parallel_ops==true code path. This may add some performance
overhead but comparing with taking the global genl_mutex, it still
looks better.

Fixes: 75cdbdd0 ("net: ieee802154: have genetlink code to parse the attrs during dumpit")
Fixes: 057af707 ("net: tipc: have genetlink code to parse the attrs during dumpit")
Reported-and-tested-by: syzbot+3039ddf6d7b13daf3787@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+80cad1e3cb4c41cde6ff@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+736bcbcb11b60d0c0792@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+520f8704db2b68091d44@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+c96e4dfb32f8987fdeed@syzkaller.appspotmail.com
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-net-2020-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Couple of fixes/small things:
 * TX control port status check fixed to not assume frame format
 * mesh control port fixes
 * error handling/leak fixes when starting AP, with HE attributes
 * fix broadcast packet handling with encapsulation offload
 * add new AKM suites
 * and a small code cleanup
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot was to trigger a bug by tricking AF_LLC with
non sensible addr->sllc_arphrd

It seems clear LLC requires an Ethernet device.

Back in commit abf9d537 ("llc: add support for SO_BINDTODEVICE")
Octavian Purdila added possibility for application to use a zero
value for sllc_arphrd, convert it to ARPHRD_ETHER to not cause
regressions on existing applications.

BUG: KASAN: use-after-free in __read_once_size include/linux/compiler.h:199 [inline]
BUG: KASAN: use-after-free in list_empty include/linux/list.h:268 [inline]
BUG: KASAN: use-after-free in waitqueue_active include/linux/wait.h:126 [inline]
BUG: KASAN: use-after-free in wq_has_sleeper include/linux/wait.h:160 [inline]
BUG: KASAN: use-after-free in skwq_has_sleeper include/net/sock.h:2092 [inline]
BUG: KASAN: use-after-free in sock_def_write_space+0x642/0x670 net/core/sock.c:2813
Read of size 8 at addr ffff88801e0b4078 by task ksoftirqd/3/27

CPU: 3 PID: 27 Comm: ksoftirqd/3 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:639
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 __read_once_size include/linux/compiler.h:199 [inline]
 list_empty include/linux/list.h:268 [inline]
 waitqueue_active include/linux/wait.h:126 [inline]
 wq_has_sleeper include/linux/wait.h:160 [inline]
 skwq_has_sleeper include/net/sock.h:2092 [inline]
 sock_def_write_space+0x642/0x670 net/core/sock.c:2813
 sock_wfree+0x1e1/0x260 net/core/sock.c:1958
 skb_release_head_state+0xeb/0x260 net/core/skbuff.c:652
 skb_release_all+0x16/0x60 net/core/skbuff.c:663
 __kfree_skb net/core/skbuff.c:679 [inline]
 consume_skb net/core/skbuff.c:838 [inline]
 consume_skb+0xfb/0x410 net/core/skbuff.c:832
 __dev_kfree_skb_any+0xa4/0xd0 net/core/dev.c:2967
 dev_kfree_skb_any include/linux/netdevice.h:3650 [inline]
 e1000_unmap_and_free_tx_resource.isra.0+0x21b/0x3a0 drivers/net/ethernet/intel/e1000/e1000_main.c:1963
 e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3854 [inline]
 e1000_clean+0x4cc/0x1d10 drivers/net/ethernet/intel/e1000/e1000_main.c:3796
 napi_poll net/core/dev.c:6532 [inline]
 net_rx_action+0x508/0x1120 net/core/dev.c:6600
 __do_softirq+0x262/0x98c kernel/softirq.c:292
 run_ksoftirqd kernel/softirq.c:603 [inline]
 run_ksoftirqd+0x8e/0x110 kernel/softirq.c:595
 smpboot_thread_fn+0x6a3/0xa40 kernel/smpboot.c:165
 kthread+0x361/0x430 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Allocated by task 8247:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc mm/kasan/common.c:513 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:521
 slab_post_alloc_hook mm/slab.h:584 [inline]
 slab_alloc mm/slab.c:3320 [inline]
 kmem_cache_alloc+0x121/0x710 mm/slab.c:3484
 sock_alloc_inode+0x1c/0x1d0 net/socket.c:240
 alloc_inode+0x68/0x1e0 fs/inode.c:230
 new_inode_pseudo+0x19/0xf0 fs/inode.c:919
 sock_alloc+0x41/0x270 net/socket.c:560
 __sock_create+0xc2/0x730 net/socket.c:1384
 sock_create net/socket.c:1471 [inline]
 __sys_socket+0x103/0x220 net/socket.c:1513
 __do_sys_socket net/socket.c:1522 [inline]
 __se_sys_socket net/socket.c:1520 [inline]
 __ia32_sys_socket+0x73/0xb0 net/socket.c:1520
 do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline]
 do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408
 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139

Freed by task 17:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:335 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
 __cache_free mm/slab.c:3426 [inline]
 kmem_cache_free+0x86/0x320 mm/slab.c:3694
 sock_free_inode+0x20/0x30 net/socket.c:261
 i_callback+0x44/0x80 fs/inode.c:219
 __rcu_reclaim kernel/rcu/rcu.h:222 [inline]
 rcu_do_batch kernel/rcu/tree.c:2183 [inline]
 rcu_core+0x570/0x1540 kernel/rcu/tree.c:2408
 rcu_core_si+0x9/0x10 kernel/rcu/tree.c:2417
 __do_softirq+0x262/0x98c kernel/softirq.c:292

The buggy address belongs to the object at ffff88801e0b4000
 which belongs to the cache sock_inode_cache of size 1152
The buggy address is located 120 bytes inside of
 1152-byte region [ffff88801e0b4000, ffff88801e0b4480)
The buggy address belongs to the page:
page:ffffea0000782d00 refcount:1 mapcount:0 mapping:ffff88807aa59c40 index:0xffff88801e0b4ffd
raw: 00fffe0000000200 ffffea00008e6c88 ffffea0000782d48 ffff88807aa59c40
raw: ffff88801e0b4ffd ffff88801e0b4000 0000000100000003 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88801e0b3f00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff88801e0b3f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88801e0b4000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                                ^
 ffff88801e0b4080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88801e0b4100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: abf9d537 ("llc: add support for SO_BINDTODEVICE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The lockdep annotations for dev_uc_unsync() and dev_mc_unsync()
are not easy to understand, so add some comments to explain
why they are correct.

Similar for the rest netif_addr_lock_bh() cases, they don't
need nested version.

Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

lockdep_set_class_and_subclass() is meant to reduce
the _nested() annotations by assigning a default subclass.
For addr_list_lock, we have to compute the subclass at
run-time as the netdevice topology changes after creation.

So, we should just get rid of these
lockdep_set_class_and_subclass() and stick with our _nested()
annotations.

Fixes: 845e0ebb ("net: change addr_list_lock back to static key")
Suggested-by: Taehee Yoo <ap420073@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes sparse warning:

Function parameter or member 'pbuflen' not described in 'packing'

Fixes: 554aae35 ("lib: Add support for generic packing operations")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following sparse warnings are fixed:
net/bridge/br_mrp.c:106:18: warning: incorrect type in assignment (different base types)
net/bridge/br_mrp.c:106:18:    expected unsigned short [usertype]
net/bridge/br_mrp.c:106:18:    got restricted __be16 [usertype]
net/bridge/br_mrp.c:281:23: warning: incorrect type in argument 1 (different modifiers)
net/bridge/br_mrp.c:281:23:    expected struct list_head *entry
net/bridge/br_mrp.c:281:23:    got struct list_head [noderef] *
net/bridge/br_mrp.c:332:28: warning: incorrect type in argument 1 (different modifiers)
net/bridge/br_mrp.c:332:28:    expected struct list_head *new
net/bridge/br_mrp.c:332:28:    got struct list_head [noderef] *
net/bridge/br_mrp.c:332:40: warning: incorrect type in argument 2 (different modifiers)
net/bridge/br_mrp.c:332:40:    expected struct list_head *head
net/bridge/br_mrp.c:332:40:    got struct list_head [noderef] *
net/bridge/br_mrp.c:682:29: warning: incorrect type in argument 1 (different modifiers)
net/bridge/br_mrp.c:682:29:    expected struct list_head const *head
net/bridge/br_mrp.c:682:29:    got struct list_head [noderef] *
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 2f1a11ae ("bridge: mrp: Add MRP interface.")
Fixes: 4b8d7d4c ("bridge: mrp: Extend bridge interface")
Fixes: 9a9f26e8 ("bridge: mrp: Connect MRP API with the switchdev API")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can't cast sk_buff to rtable by (struct rtable *)hint. Use skb_rtable().

Fixes: 02b24941 ("ipv4: use dst hint for ipv4 list receive")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The rings bitmap of an interrupt vector encodes
which of the device's rings were assigned to that
interrupt vector.
Hence the iteration range of the tx rings bitmap
(for_each_set_bit()) should be the total number of
Tx rings of that netdevice instead of the number of
rings assigned to the interrupt vector.
Since there are 2 cores, and one interrupt vector for
each core, the number of rings asigned to an interrupt
vector is half the number of available rings.
The impact of this error is that the upper half of the
tx rings could still generate interrupts during napi
polling.

Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let the network stack know the real number of queues that
we are using.

v2: added error checking

Fixes: 49d3b493 ("ionic: disable the queues on link down")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If there is an error when parsing the NL80211_ATTR_HE_BSS_COLOR
attribute, we return immediately without freeing param.acl.  Fit it by
using goto out instead of returning immediately.

Fixes: 5c5e52d1 ("nl80211: add handling for BSS color")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200626124931.7ad2a3eb894f.I60905fb70bd20389a3b170db515a07275e31845e@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When a memory leak was fixed, a return err was changed to goto err,
but, accidentally, the if (err) was removed, so now we always exit at
this point.

Fix it by adding if (err) back.

Fixes: 9951ebfc ("nl80211: fix potential leak in AP start")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200626124931.871ba5b31eee.I97340172d92164ee92f3c803fe20a8a6e97714e1@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Pull networking fixes from David Miller:

 1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.

 2) The default crypto algorithm selection in Kconfig for IPSEC is out
    of touch with modern reality, fix this up. From Eric Biggers.

 3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
    Nakryiko.

 4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
    Hangbin Liu.

 5) Adjust packet alignment handling in ax88179_178a driver to match
    what the hardware actually does. From Jeremy Kerr.

 6) register_netdevice can leak in the case one of the notifiers fail,
    from Yang Yingliang.

 7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.

 8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
    Oltean.

 9) tg3 driver can sleep forever when we get enough EEH errors, fix from
    David Christensen.

10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
    drivers, from Ciara Loftus.

11) Fix scanning loop break condition in of_mdiobus_register(), from
    Florian Fainelli.

12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.

13) Endianness fix in mlxsw, from Ido Schimmel.

14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.

15) Missing bridge mrp configuration validation, from Horatiu Vultur.

16) Fix circular netns references in wireguard, from Jason A. Donenfeld.

17) PTP initialization on recovery is not done properly in qed driver,
    from Alexander Lobakin.

18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
    from Rahul Lakkireddy.

19) Don't clear bound device TX queue of socket prematurely otherwise we
    get problems with ktls hw offloading, from Tariq Toukan.

20) ipset can do atomics on unaligned memory, fix from Russell King.

21) Align ethernet addresses properly in bridging code, from Thomas
    Martitz.

22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
  rds: transport module should be auto loaded when transport is set
  sch_cake: fix a few style nits
  sch_cake: don't call diffserv parsing code when it is not needed
  sch_cake: don't try to reallocate or unshare skb unconditionally
  ethtool: fix error handling in linkstate_prepare_data()
  wil6210: account for napi_gro_receive never returning GRO_DROP
  hns: do not cast return value of napi_gro_receive to null
  socionext: account for napi_gro_receive never returning GRO_DROP
  wireguard: receive: account for napi_gro_receive never returning GRO_DROP
  vxlan: fix last fdb index during dump of fdb with nhid
  sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
  tc-testing: avoid action cookies with odd length.
  bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  net: dsa: sja1105: fix tc-gate schedule with single element
  net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
  net: dsa: sja1105: unconditionally free old gating config
  net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
  net: macb: free resources on failure path of at91ether_open()
  net: macb: call pm_runtime_put_sync on failure path
  ...

This enhancement auto loads transport module when the transport
is set via SO_RDS_TRANSPORT socket option.
Reviewed-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Toke Høiland-Jørgensen says:

====================
sched: A couple of fixes for sch_cake

This series contains a couple of fixes for diffserv handling in sch_cake that
provide a nice speedup (with a somewhat pedantic nit fix tacked on to the end).

Not quite sure about whether this should go to stable; it does provide a nice
speedup, but it's not strictly a fix in the "correctness" sense. I lean towards
including this in stable as well, since our most important consumer of that
(OpenWrt) is likely to backport the series anyway.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

I spotted a few nits when comparing the in-tree version of sch_cake with
the out-of-tree one: A redundant error variable declaration shadowing an
outer declaration, and an indentation alignment issue. Fix both of these.

Fixes: 046f6fd5 ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As a further optimisation of the diffserv parsing codepath, we can skip it
entirely if CAKE is configured to neither use diffserv-based
classification, nor to zero out the diffserv bits.

Fixes: c87b4ecd ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cake_handle_diffserv() tries to linearize mac and network header parts of
skb and to make it writable unconditionally. In some cases it leads to full
skb reallocation, which reduces throughput and increases CPU load. Some
measurements of IPv4 forward + NAPT on MIPS router with 580 MHz single-core
CPU was conducted. It appears that on kernel 4.9 skb_try_make_writable()
reallocates skb, if skb was allocated in ethernet driver via so-called
'build skb' method from page cache (it was discovered by strange increase
of kmalloc-2048 slab at first).

Obtain DSCP value via read-only skb_header_pointer() call, and leave
linearization only for DSCP bleaching or ECN CE setting. And, as an
additional optimisation, skip diffserv parsing entirely if it is not needed
by the current configuration.

Fixes: c87b4ecd ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
[ fix a few style issues, reflow commit message ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When getting SQI or maximum SQI value fails in linkstate_prepare_data(), we
must not return without calling ethnl_ops_complete(dev) as that could
result in imbalance between ethtool_ops ->begin() and ->complete() calls.

Fixes: 80660219 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull tracing fixes from Steven Rostedt:
 "Four small fixes:

   - Fix a ringbuffer bug for nested events having time go backwards

   - Fix a config dependency for boot time tracing to depend on
     synthetic events instead of histograms.

   - Fix trigger format parsing to handle multiple spaces

   - Fix bootconfig to handle failures in multiple events"

* tag 'trace-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/boottime: Fix kprobe multiple events
  tracing: Fix event trigger to accept redundant spaces
  tracing/boot: Fix config dependency for synthedic event
  ring-buffer: Zero out time extend if it is nested and not absolute

Jason A. Donenfeld says:

====================
napi_gro_receive caller return value cleanups

In 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in
napi_gro_receive()"), the GRO_NORMAL case stopped calling
netif_receive_skb_internal, checking its return value, and returning
GRO_DROP in case it failed. Instead, it calls into
netif_receive_skb_list_internal (after a bit of indirection), which
doesn't return any error. Therefore, napi_gro_receive will never return
GRO_DROP, making handling GRO_DROP dead code.

I emailed the author of 6570bc79 on netdev [1] to see if this change
was intentional, but the dlink.ru email address has been disconnected,
and looking a bit further myself, it seems somewhat infeasible to start
propagating return values backwards from the internal machinations of
netif_receive_skb_list_internal.

Taking a look at all the callers of napi_gro_receive, it appears that
three are checking the return value for the purpose of comparing it to
the now never-happening GRO_DROP, and one just casts it to (void), a
likely historical leftover. Every other of the 120 callers does not
bother checking the return value.

And it seems like these remaining 116 callers are doing the right thing:
after calling napi_gro_receive, the packet is now in the hands of the
upper layers of the newtworking, and the device driver itself has no
business now making decisions based on what the upper layers choose to
do. Incrementing stats counters on GRO_DROP seems like a mistake, made
by these three drivers, but not by the remaining 117.

It would seem, therefore, that after rectifying these four callers of
napi_gro_receive, that I should go ahead and just remove returning the
value from napi_gro_receive all together. However, napi_gro_receive has
a function event tracer, and being able to introspect into the
networking stack to see how often napi_gro_receive is returning whatever
interesting GRO status (aside from _DROP) remains an interesting
data point worth keeping for debugging.

So, this series simply gets rid of the return value checking for the
four useless places where that check never evaluates to anything
meaningful.

[1] https://lore.kernel.org/netdev/20200624210606.GA1362687@zx2c4.com/
====================
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands. In this case, too, the non-gro path didn't bother checking
the return value. Plus, this had some clunky debugging functions that
duplicated code from elsewhere and was generally pretty messy. So, this
commit cleans that all up too.

Fixes: 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Basically no drivers care about the return value here, and there's no
__must_check that would make casting to void sensible, so remove it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.

Fixes: 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.

Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Fixes: 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes last saved fdb index in fdb dump handler when
handling fdb's with nhid.

Fixes: 1274e1cc ("vxlan: ecmp support for mac fdb entries")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a socket is set ipv6only, it will still send IPv4 addresses in the
INIT and INIT_ACK packets. This potentially misleads the peer into using
them, which then would cause association termination.

The fix is to not add IPv4 addresses to ipv6only sockets.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update odd length cookie hexstrings in csum.json, tunnel_key.json and
bpf.json to be even length to comply with check enforced in commit
0149dabf2a1b ("tc: m_actions: check cookie hexstring len") in iproute2.
Signed-off-by: Briana Oursler <briana.oursler@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neal Cardwell says:

====================
tcp_cubic: fix spurious HYSTART_DELAY on RTT decrease

This series fixes a long-standing bug in the TCP CUBIC
HYSTART_DELAY mechanim recently reported by Mirja Kuehlewind. The
code can cause a spurious exit of slow start in some particular
cases: upon an RTT decrease that happens on the 9th or later ACK
in a round trip. This series fixes the original Hystart code and
also the recent BPF implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>