This is intended to be used with queues and stacks and be more
user-friendly than 'update' without the key.

Example:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map push pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map peek pinned /sys/fs/bpf/q
value: 00 01 02 03

bpftool map create /sys/fs/bpf/s type stack value 4 entries 10 name s
bpftool map enqueue pinned /sys/fs/bpf/s value 0 1 2 3
bpftool map peek pinned /sys/fs/bpf/s
value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This is intended to be used with queues and stacks and be more
user-friendly than 'lookup' without key/value.

Example:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map peek pinned /sys/fs/bpf/q
value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When doing dump or lookup, don't print key if key_size == 0 or value if
value_size == 0. The initial usecase is queue and stack, where we have
only values.

This is for regular output only, json still has all the fields.

Before:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
key:   value: 00 01 02 03

After:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Bpftool expects key for 'lookup' operations. For some map types, key should
not be specified. Support looking up those map types.

Before:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
Error: did not find key

After:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
key:   value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Bpftool expects both key and value for 'update' operations. For some
map types, key should not be specified. Support updating those map types.

Before:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
Error: did not find key

After:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Yonghong Song says:

====================
Previous maximum supported integer bit width is 64. But
the __int128 type has been supported by most (if not all)
64bit architectures including bpf for both gcc and clang.

The kernel itself uses __int128 for x64 and arm64. Some bcc
tools are using __int128 in bpf programs to describe ipv6
addresses. Without 128bit int support, the vmlinux BTF won't
work and those bpf programs using __int128 cannot utilize BTF.

This patch set therefore implements BTF __int128 support.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

For formatted output, currently when json is enabled, the decimal
number is required. Similar to kernel bpffs printout,
for int128 numbers, only hex numbers are dumped, which are
quoted as strings.

The below is an example to show plain and json pretty print
based on the map in test_btf pretty print test.

  $ bpftool m s
  75: hash  name pprint_test_has  flags 0x0
        key 4B  value 112B  max_entries 4  memlock 4096B
  $ bpftool m d id 75
  ......
    {
        "key": 3,
        "value": {
            "ui32": 3,
            "ui16": 0,
            "si32": -3,
            "unused_bits2a": 0x3,
            "bits28": 0x3,
            "unused_bits2b": 0x3,
            "": {
                "ui64": 3,
                "ui8a": [3,0,0,0,0,0,0,0
                ]
            },
            "aenum": 3,
            "ui32b": 4,
            "bits2c": 0x1,
            "si128a": 0x3,
            "si128b": 0xfffffffd,
            "bits3": 0x3,
            "bits80": 0x10000000000000003,
            "ui128": 0x20000000000000003
        }
    },
  ......

  $ bptfool -p -j m d id 75
  ......
  {
        "key": ["0x03","0x00","0x00","0x00"
        ],
        "value": ["0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0xfd","0xff","0xff","0xff","0x0f","0x00","0x00","0xc0",
                  "0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x03","0x00","0x00","0x00","0x04","0x00","0x00","0x00",
                  "0x01","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x00","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x00","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0xfd","0xff","0xff","0xff","0x00","0x00","0x00","0x00",
                  "0x00","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x1b","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x08","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x02","0x00","0x00","0x00","0x00","0x00","0x00","0x00"
        ],
        "formatted": {
            "key": 3,
            "value": {
                "ui32": 3,
                "ui16": 0,
                "si32": -3,
                "unused_bits2a": "0x3",
                "bits28": "0x3",
                "unused_bits2b": "0x3",
                "": {
                    "ui64": 3,
                    "ui8a": [3,0,0,0,0,0,0,0
                    ]
                },
                "aenum": 3,
                "ui32b": 4,
                "bits2c": "0x1",
                "si128a": "0x3",
                "si128b": "0xfffffffd",
                "bits3": "0x3",
                "bits80": "0x10000000000000003",
                "ui128": "0x20000000000000003"
            }
        }
    }
  ......
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The bpffs pretty print test is extended to cover int128 types.
Tested on an x64 machine.
  $ test_btf -p
  ......
  BTF pretty print array(#3)......OK
  PASS:9 SKIP:0 FAIL:0
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The test_btf pretty print is refactored in order to easily
support multiple map value formats. The next patch will
add __int128 type tests which needs macro guard __SIZEOF_INT128__.
There is no functionality change with this patch.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Several int128 raw type tests are added to test_btf.
Currently these tests are enabled only for x64 and arm64
for which kernel has CONFIG_ARCH_SUPPORTS_INT128 set.

  $ test_btf
  ......
  BTF raw test[106] (128-bit int): OK
  BTF raw test[107] (struct, 128-bit int member): OK
  BTF raw test[108] (struct, 120-bit int member bitfield): OK
  BTF raw test[109] (struct, kind_flag, 128-bit int member): OK
  BTF raw test[110] (struct, kind_flag, 120-bit int member bitfield): OK
  ......
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Currently, btf only supports up to 64-bit integer.
On the other hand, 128bit support for gcc and clang
has existed for a long time. For example, both gcc 4.8
and llvm 3.7 supports types "__int128" and
"unsigned __int128" for virtually all 64bit architectures
including bpf.

The requirement for __int128 support comes from two areas:
  . bpf program may use __int128. For example, some bcc tools
    (https://github.com/iovisor/bcc/tree/master/tools),
    mostly tcp v6 related, tcpstates.py, tcpaccept.py, etc.,
    are using __int128 to represent the ipv6 addresses.
  . linux itself is using __int128 types. Hence supporting
    __int128 type in BTF is required for vmlinux BTF,
    which will be used by "compile once and run everywhere"
    and other projects.

For 128bit integer, instead of base-10, hex numbers are pretty
printed out as large decimal number is hard to decipher, e.g.,
for ipv6 addresses.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

We are already including tools/scripts/Makefile.include which correctly
handles CROSS_COMPILE, no need to define our own vars.

See related commit 7ed1c190 ("tools: fix cross-compile var clobbering")
for more details.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Fix over 100 documentation warnings in snmp_counter.rst by
extending the underline string lengths and inserting a blank line
after bullet items.

Examples:

Documentation/networking/snmp_counter.rst:1: WARNING: Title overline too short.
Documentation/networking/snmp_counter.rst:14: WARNING: Bullet list ends without a blank line; unexpected unindent.

Fixes: 2b965472 ("add document for TCP OFO, PAWS and skip ACK counters")
Fixes: 8e2ea53a ("add snmp counters document")
Fixes: 712ee16c ("add documents for snmp counters")
Fixes: 80cc4950 ("net: Add part of TCP counts explanations in snmp_counters.rst")
Fixes: b08794a9 ("documentation of some IP/ICMP snmp counters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: yupeng <yupeng0921@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This issue was detected with the help of Coccinelle.
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch bindings for spi managed mode are using spaces instead of tabs.
Fix them to get a file with a proper kernel indentation style.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Found by scripts/checkpatch.pl
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2019-01-15

This series contains updates to the ice driver only.

Bruce fixes an unused variable build warning, which was introduced with
the commit 2fd527b7 ("net: ndo_bridge_setlink: Add extack").  Added
ethtool support for get_eeprom and get_eeprom_len operations.  Added
support for bringing down the PHY link optional when the interface is
administratively downed.

Anirudh refactors the transmit scheduler functions, which results in
reduced code duplication and adds a helper function, which all the
scheduler functions call instead.  Added an LED blinking handler to
ethtool.  Reworked the queue management code to allow for reuse in
future XDP feature support.  Updates the driver to be able to preserve
the aggregator list after reset by moving it out of port_info and into
ice_hw.  Added the ability to offload SCTP checksum calculation to the
hardware.  Added support for new PHY types, which support higher link
speeds.

Md Fahad makes sure that RSS lookup table and hash key get configured
during the rebuild path after a reset.

Brett updates the driver to set the physical link state according to the
netdev state (up/down).  Added support for adaptive/dynamic interrupt
moderation in the ice driver, along with the ethtool operations needed.

Tony adds software timestamping support by using
ethtool_op_get_ts_info().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The function ice_aq_manage_mac_write takes a pointer to a MAC address.
The parameter is not marked const, even though the function doesn't need
to modify it. This prevents passing a parameter that is already marked
const. Update the function prototype to take a const pointer, to allow
passing constant pointers to this function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds code for the detection and operation of several
additional PHY types that support higher link speeds.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds the ability to offload SCTP checksum calculations to the
NIC.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Use ethtool_op_get_ts_info to provide software timestamping.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch includes the following ethtool operations:

1. get_coalesce
2. set_coalesce
3. get_per_q_coalesce
4. set_per_q_coalesce

Each ITR value (current_itr/target_itr) are stored on a per
ice_ring_container basis. This is because each valid ice_ring_container
can have 1 or more rings that are tied to the same q_vector ITR index.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently the driver does not support adaptive/dynamic interrupt
moderation. This patch adds support for this. Also, adaptive/dynamic
interrupt moderation is turned on by default upon driver load.

In order to support adaptive interrupt moderation, two functions were
added, ice_update_itr() and ice_itr_divisor(). These are used to
determine the current packet load and to determine a divisor based
on link speed respectively.

This patch also adds the ICE_ITR_GRAN_S define that is used in the
hot-path when setting a new ITR value. The shift is used to pet two
birds with one hand, set the ITR value while re-enabling the
interrupt. Also, the ICE_ITR_GRAN_S is defined as 1 because the device
has a ITR granularity of 2usecs.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The aggregator list needs to be preserved for use after a reset. This
patch moves it out of the port_info instance and into the ice_hw instance.
Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch reworks the queue management code to allow for reuse with the
XDP feature (to be added in a future patch).
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add new infrastructure for implementing ethtool private flags using the
existing pf->flags bitmap to store them, and add the link-down-on-close
ethtool private flag to optionally bring down the PHY link when the
interface is administratively downed.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When a netdev is set up/down we need to set the phsyical link state
accordingly. This patch adds that functionality by calling
ice_force_phys_link_state(vsi, link_up) in both the ice_stop() and
ice_open() paths.

In order to force link, ice_force_phys_link_state(vsi, link_up) will
first determine the current phy capabilities. If link has not changed
there is nothing to do. If link has changed, previous PHY capabilities
are saved and the "Enable Automatic Link Update" and "Link Establishment
State Machine (LESM)" enable bits are set. Then the new PHY config is
saved. The "Enable Automatic Link Update" will force the FW to execute
Setup link and restart auto-negotiation. This *should* then result in a
"Link Status Event (LSE)" which will cause the driver to get the current
link status.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add support for get_eeprom and get_eeprom_len ethtool ops

Specification states that PF software accesses NVM (shadow-ram) via AQ
commands (e.g. NVM Read, NVM Write) in the range 0x000000-0x00FFFF (64KB),
so the get_eeprom_len op should return 64KB.  If additional regions of the
16MB NVM must be read, another access method must be used.

The ethtool kernel code, by default, will ask for multiple page-size hunks
of the NVM not to exceed the value returned by ice_get_eeprom_len().
ice_read_sr_buf() deals with arch page sizes different than 4KB.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add led blinking handler to ethtool. Since led blinking is
controlled by FW/HW only ETHTOOL_ID_ACTIVE and ETHTOOL_ID_INACTIVE
are really needed.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch configures the RSS lookup table and hash key post reset.
Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The following functions were refactored to call a new common function,
ice_aqc_send_sched_elem_cmd():

- ice_aq_add_sched_elems()
- ice_aq_delete_sched_elems()
- ice_aq_move_sched_elems()
- ice_aq_query_sched_elems()
- ice_aq_cfg_sched_elems()
- ice_aq_suspend_sched_elems()
- ice_aq_resume_sched_elems()
Signed-off-by: Greg Priest <greg.priest@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Pull tracing fix from Steven Rostedt:
 "Andrea Righi fixed a NULL pointer dereference in trace_kprobe_create()

  It is possible to trigger a NULL pointer dereference by writing an
  incorrectly formatted string to the krpobe_events file"

* tag 'trace-v5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()

Pull networking fixes from David Miller:

 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur
    Gautier.

 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei.

 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano
    Brivio.

 4) Use after free in hns driver, from Yonglong Liu.

 5) icmp6_send() needs to handle the case of NULL skb, from Eric
    Dumazet.

 6) Missing rcu read lock in __inet6_bind() when operating on mapped
    addresses, from David Ahern.

 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva.

 8) Fix PHY vs r8169 module loading ordering issues, from Heiner
    Kallweit.

 9) Fix bridge vlan memory leak, from Ido Schimmel.

10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe.

11) Infoleak in ipv6_local_error(), flow label isn't completely
    initialized. From Eric Dumazet.

12) Handle mv88e6390 errata, from Andrew Lunn.

13) Making vhost/vsock CID hashing consistent, from Zha Bin.

14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo.

15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
  bnxt_en: Fix context memory allocation.
  bnxt_en: Fix ring checking logic on 57500 chips.
  mISDN: hfcsusb: Use struct_size() in kzalloc()
  net: clear skb->tstamp in bridge forwarding path
  net: bpfilter: disallow to remove bpfilter module while being used
  net: bpfilter: restart bpfilter_umh when error occurred
  net: bpfilter: use cleanup callback to release umh_info
  umh: add exit routine for UMH process
  isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
  vhost/vsock: fix vhost vsock cid hashing inconsistent
  net: stmmac: Prevent RX starvation in stmmac_napi_poll()
  net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
  net: stmmac: Check if CBS is supported before configuring
  net: stmmac: dwxgmac2: Only clear interrupts that are active
  net: stmmac: Fix PCI module removal leak
  tools/bpf: fix bpftool map dump with bitfields
  tools/bpf: test btf bitfield with >=256 struct member offset
  bpf: fix bpffs bitfield pretty print
  net: ethernet: mediatek: fix warning in phy_start_aneg
  tcp: change txhash on SYN-data timeout
  ...

Commit 2fd527b7 ("net: ndo_bridge_setlink: Add extack") added a new
parameter "extack" to ice_bridge_setlink but this parameter isn't used
by the function. This results in a warning: unused parameter ‘extack’
[-Wunused-parameter]. Fix that by adding an "__always_unused" qualifier.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

It is possible to trigger a NULL pointer dereference by writing an
incorrectly formatted string to krpobe_events (trying to create a
kretprobe omitting the symbol).

Example:

 echo "r:event_1 " >> /sys/kernel/debug/tracing/kprobe_events

That triggers this:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 6 PID: 1757 Comm: bash Not tainted 5.0.0-rc1+ #125
 Hardware name: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.5.1 08/09/2018
 RIP: 0010:kstrtoull+0x2/0x20
 Code: 28 00 00 00 75 17 48 83 c4 18 5b 41 5c 5d c3 b8 ea ff ff ff eb e1 b8 de ff ff ff eb da e8 d6 36 bb ff 66 0f 1f 44 00 00 31 c0 <80> 3f 2b 55 48 89 e5 0f 94 c0 48 01 c7 e8 5c ff ff ff 5d c3 66 2e
 RSP: 0018:ffffb5d482e57cb8 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff82b12720
 RDX: ffffb5d482e57cf8 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffffb5d482e57d70 R08: ffffa0c05e5a7080 R09: ffffa0c05e003980
 R10: 0000000000000000 R11: 0000000040000000 R12: ffffa0c04fe87b08
 R13: 0000000000000001 R14: 000000000000000b R15: ffffa0c058d749e1
 FS:  00007f137c7f7740(0000) GS:ffffa0c05e580000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000497d46004 CR4: 00000000003606e0
 Call Trace:
  ? trace_kprobe_create+0xb6/0x840
  ? _cond_resched+0x19/0x40
  ? _cond_resched+0x19/0x40
  ? __kmalloc+0x62/0x210
  ? argv_split+0x8f/0x140
  ? trace_kprobe_create+0x840/0x840
  ? trace_kprobe_create+0x840/0x840
  create_or_delete_trace_kprobe+0x11/0x30
  trace_run_command+0x50/0x90
  trace_parse_run_command+0xc1/0x160
  probes_write+0x10/0x20
  __vfs_write+0x3a/0x1b0
  ? apparmor_file_permission+0x1a/0x20
  ? security_file_permission+0x31/0xf0
  ? _cond_resched+0x19/0x40
  vfs_write+0xb1/0x1a0
  ksys_write+0x55/0xc0
  __x64_sys_write+0x1a/0x20
  do_syscall_64+0x5a/0x120
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix by doing the proper argument checks in trace_kprobe_create().

Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/lkml/20190111095108.b79a2ee026185cbd62365977@kernel.org
Link: http://lkml.kernel.org/r/20190111060113.GA22841@xps-13
Fixes: 6212dd29 ("tracing/kprobes: Use dyn_event framework for kprobe events")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Because we may call blk_mq_get_driver_tag() directly from
blk_mq_dispatch_rq_list() without holding any lock, then HARDIRQ may
come and the above DEADLOCK is triggered.

Commit ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq") tries to
fix this issue by using 'spin_lock_bh', which isn't enough because we
complete request from hardirq context direclty in case of multiqueue.

Cc: Clark Williams <williams@redhat.com>
Fixes: ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The swap_lock used by sbitmap has a chain with locks taken from softirq,
but the swap_lock is not protected from being preempted by softirqs.

A chain exists of:

 sbq->ws[i].wait -> dispatch_wait_lock -> swap_lock

Where the sbq->ws[i].wait lock can be taken from softirq context, which
means all locks below it in the chain must also be protected from
softirqs.
Reported-by: Clark Williams <williams@redhat.com>
Fixes: 58ab5e32 ("sbitmap: silence bogus lockdep IRQ warning")
Fixes: ea86ea2c ("sbitmap: amortize cost of clearing bits")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull GPIO fixes from Linus Walleij:
 "The patch hitting the MMC/SD subsystem is fixing up my own mess when
  moving semantics from MMC/SD over to gpiolib. Ulf is on vacation but I
  managed to reach him on chat and obtain his ACK.

  The other two are early-rc fixes that are not super serious but pretty
  annoying so I'd like to get rid of them.

  Summary:

   - Get rid of some WARN_ON() from the ACPI code

   - Staticize a symbol

   - Fix MMC polarity detection"

* tag 'gpio-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  mmc: core: don't override the CD GPIO level when "cd-inverted" is set
  gpio: pca953x: Make symbol 'pca953x_i2c_regmap' static
  gpiolib-acpi: Remove unnecessary WARN_ON from acpi_gpiochip_free_interrupts