- 10 Mar, 2016 14 commits
-
-
Andi Kleen authored
Add a new mode to only print metrics. Sometimes we don't care about the raw values, just want the computed metrics. This allows more compact printing, so with -I each sample is only a single line. This also allows easier plotting and processing with other tools. The main target is with using --topdown, but it also works with -T and standard perf stat. A few metrics are not supported. To avoiding having to hardcode all the metrics in the code it uses a two pass approach: first compute dummy metrics and only print the headers in the print_metric callback. Then use the callback to print the actual values. There are some additional changes in the stat printout code to handle all metrics being on a single line. One issue is that the column code doesn't know in advance what events are not supported by the CPU, and it would be hard to find out as this could change based on dynamic conditions. That causes empty columns in some cases. The output can be fairly wide, often you may need more than 80 columns. Example: % perf stat -a -I 1000 --metric-only 1.001452803 frontend cycles idle insn per cycle stalled cycles per insn branch-misses of all branches 1.001452803 158.91% 0.66 2.39 2.92% 2.002192321 180.63% 0.76 2.08 2.96% 3.003088282 150.59% 0.62 2.57 2.84% 4.004369835 196.20% 0.98 1.62 3.79% 5.005227314 231.98% 0.84 1.90 4.71% v2: Lots of updates. v3: Use slightly narrower columns v4: Add comment Signed-off-by:Andi Kleen <ak@linux.intel.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1457049458-28956-6-git-send-email-andi@firstfloor.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Andi Kleen authored
With all the recently added fields in the perf stat CSV output we should finally document them in the man page. Do this here. v2: Fix fields in documentation (Jiri) v3: fix order of fields again (Jiri) v4: Change order again. v5: Document more fields (Jiri) v6: Move time stamp first v7: More fixes (Jiri) Signed-off-by:
-
Namhyung Kim authored
The context menu in TUI hists browser checks corresponding sort keys when creating the menu item. But hotkey actions lacks these checks so it can filter using incorrect info. For example, default sort key of 'perf top' doesn't contain 'comm' or 'pid' sort key so each hist entry's thread info is not reliable. Thus it should prohibit using thread filter on 't' key. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1457533253-21419-3-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
The commit 2eafd410 ("perf hists browser: Only 'Zoom into thread' only when sort order has 'pid'") disabled thread filtering in hist browser for the default sort key. However the he->thread is still valid even if 'pid' sort key is not given. Only thing it should not use is the pid (or tid) of the thread. So allow to filter by thread when 'comm' sort key is given and show pid only if 'pid' sort key is given. Signed-off-by:
-
Namhyung Kim authored
The sort__has_comm variable is to check whether the comm sort key is given. This is necessary to support thread filtering in the TUI hists browser later. Signed-off-by:
-
Namhyung Kim authored
When hierarchy mode is enabled, each entry in a hierarchy level shares the period. IOW an upper level entry's period is the sum of lower level entries. Thus perf uses only one of them to calculate the total period of hists. It was lowest-level (leaf) entries but it has a problem when it comes to filters. If a filter is applied, entries in the same level will be filtered or not. But upper level entries still have period of their sum including filtered one. So total sum of upper level entries will not be same as sum of lower level entries. This resulted in entries having more than 100% of overhead and it can be produced using perf top with filter(s). Reported-and-Tested-by:
-
Namhyung Kim authored
The nr_sort_keys field is to carry the number of sort entries in a hpp_list or hists to determine the depth of indentation of a hist entry. As it's only used in hierarchy mode and now we have used nr_hpp_node for this reason, there's no need to keep it anymore. Let's get rid of it. Signed-off-by:
-
Namhyung Kim authored
The hist_browser__fprintf_hierarchy_entry() if to dump current output into a file so it needs to be sync-ed with the corresponding function hist_browser__show_hierarchy_entry(). So use hists->nr_hpp_node to indent width and use first fmt_node to print overhead columns instead of checking whether it's a sort entry (or dynamic entry). Signed-off-by:
-
Namhyung Kim authored
It's not used anymore and the output format is accessed by the hpp_list pointer instead when hierarchy is enabled. Let's get rid of it. Signed-off-by:
-
Namhyung Kim authored
When a command-line filter is applied in hierarchy mode, output is broken especially when filtering on lower level. The higher level entries doesn't show up so it's hard to see the results. Also it needs to handle multi sort keys in a single hierarchy level. Before: $ perf report --hierarchy -s 'cpu,{dso,comm}' --comms swapper --stdio ... # Overhead CPU / Shared Object+Command # ........... ........................... # 13.79% [kernel.vmlinux] swapper 31.71% 000 13.80% [kernel.vmlinux] swapper 0.43% [e1000e] swapper 11.89% [kernel.vmlinux] swapper 9.18% [kernel.vmlinux] swapper After: # Overhead CPU / Shared Object+Command # ........... ............................... # 33.09% 003 13.79% [kernel.vmlinux] swapper 31.71% 000 13.80% [kernel.vmlinux] swapper 0.43% [e1000e] swapper 21.90% 002 11.89% [kernel.vmlinux] swapper 13.30% 001 9.18% [kernel.vmlinux] swapper Signed-off-by: -
Namhyung Kim authored
Those functions are for checkinf if a given perf_hpp_fmt is a filter-related sort entry. With hierarchy mode, it needs to check filters on the hist entries with its own hpp format list. Signed-off-by:
-
Namhyung Kim authored
When hierarchy mode is enabled each output format is in a separate hpp list. So when applying a filter it should check all formats in the list. Currently it only checks a single ->fmt field which was not set properly. Signed-off-by:
-
Jiri Olsa authored
Build jitdump only on architectures defined in util/genelf.h file, to avoid breaking the build on such arches. Signed-off-by:
-
Steven Rostedt authored
When evaluating values for print flags, if the value included a '~' operator, the parsing would fail. This broke kmalloc's parsing of: __print_flags(REC->gfp_flags, "|", {(unsigned long)((((((( gfp_t)(0x400000u|0x2000000u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) | (( gfp_t)0x20000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u)) | (( gfp_t)0x4000u) | (( gfp_t)0x10000u) | (( gfp_t)0x1000u) | (( gfp_t)0x200u)) & ~(( gfp_t)0x2000000u)) ^ | here Signed-off-by:Steven Rostedt <rostedt@goodmis.org> Reported-by:
David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160226181328.22f47129@gandalf.local.homeSigned-off-by:
-
- 09 Mar, 2016 5 commits
-
-
Jiri Olsa authored
There's no need to use a const char pointer, we can used char pointer from the beginning and omit the unnecessary cast. Reported-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jiri Olsa authored
Pass perf_hpp_list all the way through setup_sort_list so that the sort entry can be added on the arbitrary list. Signed-off-by:
-
Chris Phlipot authored
Remove the union in evsel so that the database id and priv pointer can be used simultainously without conflicting and crashing. Detailed Description for the fixed bug follows: perf script crashes with a segmentation fault on user space tool version 4.5.rc7.ge2857b when using the python database export API. It works properly in 4.4 and prior versions. the crash fist appeared in: cfc8874a ("perf script: Process cpu/threads maps") How to reproduce the bug: Remove any temporary files left over from a previous crash (if you have already attemped to reproduce the bug): $ rm -r test_db-perf-data $ dropdb test_db $ perf record timeout 1 yes >/dev/null $ perf script -s scripts/python/export-to-postgresql.py test_db Stack Trace: Program received signal SIGSEGV, Segmentation fault. __GI___libc_free (mem=0x1) at malloc.c:2929 2929 malloc.c: No such file or directory. (gdb) bt at util/stat.c:122 argv=<optimized out>, prefix=<optimized out>) at builtin-script.c:2231 argc=argc@entry=4, argv=argv@entry=0x7fffffffdf70) at perf.c:390 at perf.c:451 Signed-off-by:
Chris Phlipot <cphlipot0@gmail.com> Acked-by:
-
Arnaldo Carvalho de Melo authored
While building on a Docker container for ubuntu and installing package by package one ends up with: MKDIR /tmp/build/util/ CC /tmp/build/util/genelf.o util/genelf.c:22:19: fatal error: dwarf.h: No such file or directory #include <dwarf.h> ^ compilation terminated. mv: cannot stat '/tmp/build/util/.genelf.o.tmp': No such file or directory Because the jitdump code needs the DWARF related development packages to be installed. So make it dependent on that so that the build can succeed without jitdump support. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-le498robnmxd40237wej3w62@git.kernel.orgSigned-off-by: -
Ingo Molnar authored
The following upcoming upstream commit: 92b0729c ("x86/mm, x86/mce: Add memcpy_mcsafe()") Adds _ASM_EXTABLE_FAULT(), which is not available in user-space and breaks the build. We don't really need _ASM_EXTABLE_FAULT() in user-space, so simply wrap it to nothing. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
- 08 Mar, 2016 21 commits
-
-
Borislav Petkov authored
Drop the quirk() function pointer in favor of a simple boolean which says whether the quirk should be applied or not. Update comment while at it. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Harish Chegondi <harish.chegondi@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-tip-commits@vger.kernel.org Link: http://lkml.kernel.org/r/20160308164041.GF16568@pd.tnicSigned-off-by:
-
Kostenzer Felix authored
ignore_nmis is used in two distinct places: 1. modified through {stop,restart}_nmi by alternative_instructions 2. read by do_nmi to determine if default_do_nmi should be called or not thus the access pattern conforms to __read_mostly and do_nmi() is a fastpath. Signed-off-by:Kostenzer Felix <fkostenzer@live.at> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Andi Kleen authored
Jiri reported some time ago that some entries in the PEBS data source table in perf do not agree with the SDM. We investigated and the bits changed for Sandy Bridge, but the SDM was not updated. perf already implements the bits correctly for Sandy Bridge and later. This patch patches it up for Nehalem and Westmere. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jolsa@kernel.org Link: http://lkml.kernel.org/r/1456871124-15985-1-git-send-email-andi@firstfloor.orgSigned-off-by:
-
Stephane Eranian authored
This patch adds a Broadwell specific PEBS event constraint table. Broadwell has a fix for the HT corruption bug erratum HSD29 on Haswell. Therefore, there is no need to mark events 0xd0, 0xd1, 0xd2, 0xd3 has requiring the exclusive mode across both sibling HT threads. This holds true for regular counting and sampling (see core.c) and PEBS (ds.c) which we fix in this patch. In doing so, we relax evnt scheduling for these events, they can now be programmed on any 4 counters without impacting what is measured on the sibling thread. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Stephane Eranian authored
This patch fixes an issue with the GLOBAL_OVERFLOW_STATUS bits on Haswell, Broadwell and Skylake processors when using PEBS. The SDM stipulates that when the PEBS iterrupt threshold is crossed, an interrupt is posted and the kernel is interrupted. The kernel will find GLOBAL_OVF_SATUS bit 62 set indicating there are PEBS records to drain. But the bits corresponding to the actual counters should NOT be set. The kernel follows the SDM and assumes that all PEBS events are processed in the drain_pebs() callback. The kernel then checks for remaining overflows on any other (non-PEBS) events and processes these in the for_each_bit_set(&status) loop. As it turns out, under certain conditions on HSW and later processors, on PEBS buffer interrupt, bit 62 is set but the counter bits may be set as well. In that case, the kernel drains PEBS and generates SAMPLES with the EXACT tag, then it processes the counter bits, and generates normal (non-EXACT) SAMPLES. I ran into this problem by trying to understand why on HSW sampling on a PEBS event was sometimes returning SAMPLES without the EXACT tag. This should not happen on user level code because HSW has the eventing_ip which always point to the instruction that caused the event. The workaround in this patch simply ensures that the bits for the counters used for PEBS events are cleared after the PEBS buffer has been drained. With this fix 100% of the PEBS samples on my user code report the EXACT tag. Before: $ perf record -e cpu/event=0xd0,umask=0x81/upp ./multichase $ perf report -D | fgrep SAMPLES PERF_RECORD_SAMPLE(IP, 0x2): 11775/11775: 0x406de5 period: 73469 addr: 0 exact=Y \--- EXACT tag is missing After: $ perf record -e cpu/event=0xd0,umask=0x81/upp ./multichase $ perf report -D | fgrep SAMPLES PERF_RECORD_SAMPLE(IP, 0x4002): 11775/11775: 0x406de5 period: 73469 addr: 0 exact=Y \--- EXACT tag is set The problem tends to appear more often when multiple PEBS events are used. Signed-off-by: -
Stephane Eranian authored
This patch adds a definition for GLOBAL_OVFL_STATUS bit 55 which is used with the Processor Trace (PT) feature. Signed-off-by:
-
Kan Liang authored
This patch tries to fix a PEBS warning found in my stress test. The following perf command can easily trigger the pebs warning or spurious NMI error on Skylake/Broadwell/Haswell platforms: sudo perf record -e 'cpu/umask=0x04,event=0xc4/pp,cycles,branches,ref-cycles,cache-misses,cache-references' --call-graph fp -b -c1000 -a Also the NMI watchdog must be enabled. For this case, the events number is larger than counter number. So perf has to do multiplexing. In perf_mux_hrtimer_handler, it does perf_pmu_disable(), schedule out old events, rotate_ctx, schedule in new events and finally perf_pmu_enable(). If the old events include precise event, the MSR_IA32_PEBS_ENABLE should be cleared when perf_pmu_disable(). The MSR_IA32_PEBS_ENABLE should keep 0 until the perf_pmu_enable() is called and the new event is precise event. However, there is a corner case which could restore PEBS_ENABLE to stale value during the above period. In perf_pmu_disable(), GLOBAL_CTRL will be set to 0 to stop overflow and followed PMI. But there may be pending PMI from an earlier overflow, which cannot be stopped. So even GLOBAL_CTRL is cleared, the kernel still be possible to get PMI. At the end of the PMI handler, __intel_pmu_enable_all() will be called, which will restore the stale values if old events haven't scheduled out. Once the stale pebs value is set, it's impossible to be corrected if the new events are non-precise. Because the pebs_enabled will be set to 0. x86_pmu.enable_all() will ignore the MSR_IA32_PEBS_ENABLE setting. As a result, the following NMI with stale PEBS_ENABLE trigger pebs warning. The pending PMI after enabled=0 will become harmless if the NMI handler does not change the state. This patch checks cpuc->enabled in pmi and only restore the state when PMU is active. Here is the dump: Call Trace: <NMI> [<ffffffff813c3a2e>] dump_stack+0x63/0x85 [<ffffffff810a46f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff810a483a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8100fe2e>] intel_pmu_drain_pebs_nhm+0x2be/0x320 [<ffffffff8100caa9>] intel_pmu_handle_irq+0x279/0x460 [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 [<ffffffff811f290d>] ? vunmap_page_range+0x20d/0x330 [<ffffffff811f2f11>] ? unmap_kernel_range_noflush+0x11/0x20 [<ffffffff8148379f>] ? ghes_copy_tofrom_phys+0x10f/0x2a0 [<ffffffff814839c8>] ? ghes_read_estatus+0x98/0x170 [<ffffffff81005a7d>] perf_event_nmi_handler+0x2d/0x50 [<ffffffff810310b9>] nmi_handle+0x69/0x120 [<ffffffff810316f6>] default_do_nmi+0xe6/0x100 [<ffffffff810317f2>] do_nmi+0xe2/0x130 [<ffffffff817aea71>] end_repeat_nmi+0x1a/0x1e [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 <<EOE>> <IRQ> [<ffffffff81006df8>] ? x86_perf_event_set_period+0xd8/0x180 [<ffffffff81006eec>] x86_pmu_start+0x4c/0x100 [<ffffffff8100722d>] x86_pmu_enable+0x28d/0x300 [<ffffffff811994d7>] perf_pmu_enable.part.81+0x7/0x10 [<ffffffff8119cb70>] perf_mux_hrtimer_handler+0x200/0x280 [<ffffffff8119c970>] ? __perf_install_in_context+0xc0/0xc0 [<ffffffff8110f92d>] __hrtimer_run_queues+0xfd/0x280 [<ffffffff811100d8>] hrtimer_interrupt+0xa8/0x190 [<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0 [<ffffffff81051bd8>] local_apic_timer_interrupt+0x38/0x60 [<ffffffff817af01d>] smp_apic_timer_interrupt+0x3d/0x50 [<ffffffff817ad15c>] apic_timer_interrupt+0x8c/0xa0 <EOI> [<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0 [<ffffffff81123de5>] ? smp_call_function_single+0xd5/0x130 [<ffffffff81123ddb>] ? smp_call_function_single+0xcb/0x130 [<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0 [<ffffffff8119765a>] event_function_call+0x10a/0x120 [<ffffffff8119c660>] ? ctx_resched+0x90/0x90 [<ffffffff811971e0>] ? cpu_clock_event_read+0x30/0x30 [<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60 [<ffffffff8119772b>] _perf_event_enable+0x5b/0x70 [<ffffffff81197388>] perf_event_for_each_child+0x38/0xa0 [<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60 [<ffffffff811a0ffd>] perf_ioctl+0x12d/0x3c0 [<ffffffff8134d855>] ? selinux_file_ioctl+0x95/0x1e0 [<ffffffff8124a3a1>] do_vfs_ioctl+0xa1/0x5a0 [<ffffffff81036d29>] ? sched_clock+0x9/0x10 [<ffffffff8124a919>] SyS_ioctl+0x79/0x90 [<ffffffff817ac4b2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 ---[ end trace aef202839fe9a71d ]--- Uhhuh. NMI received for unknown reason 2d on CPU 2. Do you have a strange power saving mode enabled? Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Jiri Olsa authored
Using PAGE_SIZE buffers makes the WRMSR to PERF_GLOBAL_CTRL in intel_pmu_enable_all() mysteriously hang on Core2. As a workaround, we don't do this. The hard lockup is easily triggered by running 'perf test attr' repeatedly. Most of the time it gets stuck on sample session with small periods. # perf test attr -vv 14: struct perf_event_attr setup : --- start --- ... 'PERF_TEST_ATTR=/tmp/tmpuEKz3B /usr/bin/perf record -o /tmp/tmpuEKz3B/perf.data -c 123 kill >/dev/null 2>&1' ret 1 Reported-by: -
Alexander Shishkin authored
The error path in perf_event_open() is such that asking for a sampling event on a PMU that doesn't generate interrupts will end up in dropping the perf_sched_count even though it hasn't been incremented for this event yet. Given a sufficient amount of these calls, we'll end up disabling scheduler's jump label even though we'd still have active events in the system, thereby facilitating the arrival of the infernal regions upon us. I'm fixing this by moving account_event() inside perf_event_alloc(). Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Ingo Molnar authored
Merge perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Allow grouping multiple sort keys per 'perf report/top --hierarchy' level (Namhyung Kim) - Document 'perf stat --detailed' option (Borislav Petkov) Infrastructure changes: - jitdump prep work for supporting it with Intel PT (Adrian Hunter) - Use 64-bit shifts with (TSC) time conversion (Adrian Hunter) Fixes: - Explicitly declare inc_group_count as a void function (Colin Ian King) Signed-off-by: -
Namhyung Kim authored
Now hpp formats are linked using perf_hpp_list_node when hierarchy is enabled. Like in stdio, use this info to print entries with multiple sort keys in a single hierarchy properly. Signed-off-by:
-
Namhyung Kim authored
Now hpp formats are linked using perf_hpp_list_node when hierarchy is enabled. Like in stdio, use this info to print entries with multiple sort keys in a single hierarchy properly. Tested-by:
-
Namhyung Kim authored
Now hpp formats are linked using perf_hpp_list_node when hierarchy is enabled. Use this info to print entries with multiple sort keys in a single hierarchy properly. For example, the below example shows using 4 sort keys with 2 levels. $ perf report --hierarchy -s '{prev_pid,prev_comm},{next_pid,next_comm}' \ --percent-limit 1 -i perf.data.sched ... # Overhead prev_pid+prev_comm / next_pid+next_comm # ........... ....................................... # 22.36% 0 swapper/0 9.48% 17773 transmission-gt 5.25% 109 kworker/0:1H 1.53% 6524 Xephyr 21.39% 17773 transmission-gt 9.52% 0 swapper/0 9.04% 0 swapper/2 1.78% 0 swapper/3 Tested-by: -
Namhyung Kim authored
When multiple sort keys are used in a single hierarchy, it should indent using number of hierarchy levels instead of number of sort keys. Signed-off-by:
-
Namhyung Kim authored
This implements having multiple sort keys in a single hierarchy level. Originally only single sort key is supported for each level, but now using the group syntax with '{ }', it can set more than one sort key in one level. Note that now it needs to quote in order to prevent shell interpretation. For example: $ perf report --hierarchy -s '{comm,dso},sym' ... # Overhead Command / Shared Object / Symbol # .............. .......................................... # 48.67% swapper [kernel.vmlinux] 34.42% [k] intel_idle 1.30% [k] __tick_nohz_idle_enter 1.03% [k] cpuidle_reflect 8.87% firefox libpthread-2.22.so 6.60% [.] __GI___libc_recvmsg 1.18% [.] pthread_cond_signal@@GLIBC_2.3.2 1.09% [.] 0x000000000000ff4b 6.11% Xorg libc-2.22.so 5.27% [.] __memcpy_sse2_unaligned In the above example, the command name and the shared object name are shown on the same line but the symbol name is on the different line. Since the first two are grouped by '{}', they are in the same level. Suggested-and-Tested=by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: -
Namhyung Kim authored
Now each hists has its own hpp lists in hierarchy. So instead of having a pointer to a single perf_hpp_fmt in a hist entry, make it point the hpp_list for its level. This will be used to support multiple sort keys in a single hierarchy level. Signed-off-by:
-
Namhyung Kim authored
The perf_hpp__setup_hists_formats() is to build hists-specific output formats (and sort keys). Currently it's only used in order to build the output format in a hierarchy with same sort keys, but it could be used with different sort keys in non-hierarchy mode later. Signed-off-by:
-
Borislav Petkov authored
I'm surprised this remained undocumented since at least 2011. And it is actually a very useful switch, as Steve and I came to realize recently. Add the text from 2cba3ffb ("perf stat: Add -d -d and -d -d -d options to show more CPU events") which added the incrementing aspect to -d. Tested-by:
-
Namhyung Kim authored
The level field is to distinguish levels in the hierarchy mode. Currently each column (perf_hpp_fmt) has a different level. Signed-off-by:
-
Adrian Hunter authored
Commit b9511cd7 ("perf/x86: Fix time_shift in perf_event_mmap_page") altered the time conversion algorithms documented in the perf_event.h header file, to use 64-bit shifts. That was done to make the code more future-proof (i.e. some time in the future a 32-bit shift could be allowed). Reflect those changes in perf tools. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Adrian Hunter authored
Move clockid validation into jit_process() so it can later be made conditional. Signed-off-by:
-
