- 14 Aug, 2013 1 commit
-
-
Olof Johansson authored
Merge tag 'renesas-pinmux-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Renesas ARM based SoC pinmux updates for v3.12 SH Mobile pinctrl DT support * tag 'renesas-pinmux-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT ARM: shmobile: armadillo-reference: Add st1232 pin mappings ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree ARM: shmobile: sh73a0: Add pin control device to device tree ARM: shmobile: sh7372: Add pin control device to device tree ARM: shmobile: r8a7790: Add GPIO controller devices to device tree ARM: shmobile: r8a7790: Add pin control device to device tree ARM: shmobile: r8a7779: Add GPIO controller devices to device tree ARM: shmobile: r8a7779: Add pin control device to device tree ARM: shmobile: r8a7778: Add GPIO controller devices to device tree ARM: shmobile: r8a7778: Add pin control device to device tree ARM: shmobile: r8a7740: Add pin control device to device tree ARM: shmobile: r8a73a4: Add pin control device to device tree Signed-off-by:
Olof Johansson <olof@lixom.net> Conflicts: arch/arm/boot/dts/r8a73a4.dtsi arch/arm/boot/dts/r8a7790.dtsi
-
- 13 Aug, 2013 3 commits
-
-
Kevin Hilman authored
From: Haojian Zhuang <haojian.zhuang@gmail.com>: * pxa/dt: ARM: pxa: DTS: override gpio node in pxa3xx.dtsi ARM: pxa: fix DT auxdata for pxa3xx-gpio Signed-off-by:Kevin Hilman <khilman@linaro.org>
-
Daniel Mack authored
The gpio controller node inherited from pxa2xx.dtsi won't work for pxa3xx SoCs, so let's override it in pxa3xx.dtsi. Signed-off-by:Daniel Mack <zonque@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de>
-
Daniel Mack authored
Commit f8731174 ("ARM: mmp: add more compatible names in gpio driver") changed the DT match string for pxa3xx-gpio, but left the auxdata table unchanged. Signed-off-by:
-
- 04 Aug, 2013 1 commit
-
-
Olof Johansson authored
Merge tag 'renesas-dt-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Renesas ARM-based SoC DT updates for v3.12 * Reference implementation for kzm9d board * Add MMCIF and SDHI DT templates for r8a7790 and r8a73a4 SoCs * Use DT for SMP and GIC initialisation on emev2 SoC and kzm9d board * Add GIO to dtsi of emev2 SoC * Update dts command line of kzm9d board * Add CPUFreq support to ape6evm board * Add I2C controller DT nodes to r8a73a4 SoC * tag 'renesas-dt-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits) ARM: shmobile: Add SMSC ethernet chip to KZM9D DT reference ARM: shmobile: KZM9D DT reference implementation ARM: shmobile: r8a7790: add MMCIF and SDHI DT templates ARM: shmobile: r8a73a4: add MMCIF and SDHI DT templates ARM: shmobile: EMEV2 map_io update ARM: shmobile: Use DT for SMP on EMEV2 and KZM9D ARM: shmobile: Use DT for GIC on EMEV2 and KZM9D ARM: shmobile: Add GIO to EMEV2 dtsi ARM: shmobile: Update KZM9D dts command line ARM: shmobile: ape6evm: add CPUFreq support ARM: shmobile: r8a73a4: add I2C controller DT nodes ARM: shmobile: Remove unused mach/dma.h ARM: shmobile: r8a7778: remove r8a7778_init_irq() ARM: shmobile: Fix EMEV2 clock comment typo ARM: shmobile: Make EMEV2 platform devices more compact ARM: shmobile: Remove unused EMEV2/KZM9D early console ARM: shmobile: Remove redundant r8a7790 callback ARM: shmobile: Remove unused sh73a0 auxdata table ARM: shmobile: Remove unused sh7372 auxdata table ARM: shmobile: Remove unused r8a7779 auxdata table ... Signed-off-by:
-
- 22 Jul, 2013 19 commits
-
-
Laurent Pinchart authored
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Create two GPIO-controlled fixed-voltage regulators in the kzm9g-reference DT and remove manual configuration of the corresponding GPIOs from board code. Signed-off-by:
-
Laurent Pinchart authored
Replace the pinctrl mappings in board code by device tree mappings. For devices that are still instantiated from board code reference the mappings as the default pin controller state to apply them at boot time. Signed-off-by:
-
Laurent Pinchart authored
LED2 to LED4 are GPIO LEDs. Add corresponding DT nodes. Signed-off-by:
-
Laurent Pinchart authored
Replace the pinctrl mappings in board code by device tree mappings. For devices that are still instantiated from board code reference the mappings as the default pin controller state to apply them at boot time. Signed-off-by:
-
Laurent Pinchart authored
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes. Signed-off-by:
-
Laurent Pinchart authored
Reference the st1232 reset GPIO from the device tree and remove it from board code. Signed-off-by:
-
Laurent Pinchart authored
Add pin mappings for the st1232 device to the device tree and reference them as the default state for the device. Signed-off-by:
-
Laurent Pinchart authored
Replace the pinctrl mappings in board code by device tree mappings. For devices that are still instantiated from board code reference the mappings as the default pin controller state to apply them at boot time. Signed-off-by:
-
Laurent Pinchart authored
Add a pfc node to the sh73a0 device tree and remove manual pinmux initialization from the corresponding board files. Signed-off-by:
-
Laurent Pinchart authored
Add a pfc node to the sh7372 device tree. Signed-off-by:
-
Laurent Pinchart authored
Add GPIO controller nodes to the r8a7790 core device tree. Signed-off-by:
-
Laurent Pinchart authored
Add a pfc node to the r8a7790 device tree. Signed-off-by:
-
Laurent Pinchart authored
Add GPIO controller nodes to the r8a7779 core device tree. Signed-off-by:
-
Laurent Pinchart authored
Add a pfc node to the r8a7779 device tree and remove manual pinmux initialization from the corresponding board files. Signed-off-by:
-
Laurent Pinchart authored
Add GPIO controller nodes to the r8a7778 core device tree. Signed-off-by:
-
Laurent Pinchart authored
Add a pfc node to the r8a7778 device tree. Signed-off-by:
-
Laurent Pinchart authored
Add a pfc node to the r8a7740 device tree and remove manual pinmux initialization from the corresponding board files. Signed-off-by:
-
Laurent Pinchart authored
Add a pfc node to the r8a73a4 device tree. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by:
-
- 17 Jul, 2013 16 commits
-
-
Magnus Damm authored
Add support for the SMSC ethernet controller found on the KZM9D board to the KZM9D DT Reference code. Signed-off-by:
Magnus Damm <damm@opensource.se> Signed-off-by:
-
Magnus Damm authored
Add a DT reference implementation for the KZM9D board. Only DT devices are used in this case. UART, STI, GPIO and SMP / GIC are all provided by emev2.dtsi. There is still a board specific C file used for enabling legacy SH clocks. This file will be removed after we have moved over to common clocks. Signed-off-by:
-
Guennadi Liakhovetski authored
This adds DT templates for all MMCIF and SDHI controllers on r8a7790. They are added with status="disabled". To use them platform-specific DTs have to enable the required ones. Signed-off-by:
-
Guennadi Liakhovetski authored
This adds DT templates for all MMCIF and SDHI controllers on r8a73a4. They are added with status="disabled". To use them platform-specific DTs have to enable the required ones. Signed-off-by:
-
Magnus Damm authored
Update the EMEV2 struct map_desc to exclude the SMU and also include the ->map_io() callback in the DT version of EMEV2 board support. The EMEV2 SMP code can these days perform ioremap() early on without the SMU information in the io_desc[]. To correctly support SMP in case of DT-only board support then the ->map_io() callback is needed. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Magnus Damm authored
Rework the EMEV2 SMP code to rely on DT for CPU information instead of reading out number of CPU cores from the SCU. Signed-off-by:
-
Magnus Damm authored
Remove the C version of the EMEV2 GIC setup code, instead rely on GIC information provided by DT. Signed-off-by:
-
Magnus Damm authored
Add GIO0->GIO4 device nodes to the EMEV2 dtsi file. Signed-off-by:
-
Magnus Damm authored
Update the KZM9D DTS command line to remove following cruft: - console=tty0 - no graphic support upstream anyway - earlyprintk= - not supported by the 8250-em driver anyway - mem= - this is provided via DT anyway Signed-off-by:
-
Guennadi Liakhovetski authored
This patch adds OPPs to the CA15 DT node and a max8973 DT node to support clock and voltage scaling, using the cpufreq-cpu0 CPUFreq driver. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Add Device Tree nodes for the 9 I2C controllers on r8a73a4, compatible with the i2c-sh_mobile.c driver. Signed-off-by:
-
Magnus Damm authored
Remove mach-shmobile mach/dma.h since it only seems to be used on non-mach-shmobile platforms. Signed-off-by:
-
Kuninori Morimoto authored
This patch removes r8a7778_init_irq(), since no-one is using it. And now, there is no reason to have r8a7778_init_irq_common(). r8a7778_init_irq_dt() includes it. Signed-off-by:
-
Magnus Damm authored
Update the STI timer frequency comment to 32.768 kHz to fix 37 kHz typo. Signed-off-by:
-
Magnus Damm authored
Convert the EMEV2 SoC device setup code from using very verbose resources and static platform devices to the same style as more recent boards. This reduces the size of the code. Signed-off-by:
-
Magnus Damm authored
Remove EMEV2 early console code from KZM9D and instead rely on console setup during regular platform device probe time. This makes the DT code and the KZM9D board support behave the same. Signed-off-by:
-
