- 26 May, 2015 18 commits
-
-
Shao Fu authored
The driver was setting a channel plan for the world. Now it reads it fromi EEPROM. In addition, a typo was fixed. Signed-off-by:
Shao Fu <shaofu@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Shao Fu authored
The driver was setting a channel plan for the world. Now it reads it from EEPROM. Signed-off-by:
-
Shao Fu authored
Driver rtlwifi maintains its own regulatory information, The Chrome Autotest (https://www.chromium.org/chromium-os/testing/autotest-user-doc) showed some errors. This patch adds the necessary information for rtlwifi. Signed-off-by:
-
Dan Carpenter authored
These are used like: set_bit(WORK_LINK_UP, &priv->work_pending); The problem is that set_bit() takes the actual bit number and not a mask so static checkers get upset. It doesn't affect run time because we do it consistently, but we may as well clean it up. Fixes: 6010ce07 ('rndis_wlan: do link-down state change in worker thread') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
In d8a2c51c ('ath9k_htc: Use atomic operations for op_flags') we changed things like this: - if (priv->op_flags & OP_TSF_RESET) { + if (test_bit(OP_TSF_RESET, &priv->op_flags)) { The problem is that test_bit() takes a bit number and not a mask. It means that when we do: set_bit(OP_TSF_RESET, &priv->op_flags); Then it sets the (1 << 6) bit instead of the 6 bit so we are setting a bit which is past the end of the unsigned long. Fixes: d8a2c51c ('ath9k_htc: Use atomic operations for op_flags') Signed-off-by:
-
Arnd Bergmann authored
gcc-5.0 gained a new warning in the fwsignal portion of the brcmfmac driver: drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function 'brcmf_fws_txs_process': drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] This is a false positive, and marking the brcmf_fws_hanger_poppkt function as 'static inline' makes the warning go away. I have checked the object file output and while a little code gets moved around, the size of the binary remains identical. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Nicholas Mc Guire authored
Return type of wait_for_completion_timeout is unsigned long not int. An appropriately named unsigned long is added, and the assignments as well as error checking fixed up. API conformance testing for completions with coccinelle spatches are being used to locate API usage inconsistencies: ./drivers/net/wireless/ath/carl9170/usb.c:675 int return assigned to unsigned long Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m, CONFIG_CARL9170=m Patch is against 4.1-rc3 (localversion-next is -next-20150512) Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Acked-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Zhaoyang Liu authored
This patch changes all debug print functions from dev_dbg/dev_err/dev_info to mwifiex specific debug functions. Signed-off-by:
Zhaoyang Liu <liuzy@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
-
Zhaoyang Liu authored
This patch is to add support for data hexdump debug feature. It is controlled by level debug_mask in adapter structure. Signed-off-by:
-
Zhaoyang Liu authored
This patch adds support for debugging print control in mwifiex driver. The debug level can be controlled via either by modules load parameter debug_mask or by writing to debug_mask in debugfs file. Signed-off-by:
-
Chin-ran Lo authored
This patch adds support for FW memory read/write operations via debugfs. This is useful during debugging FW issues. Examples: For reading FW memory location: echo r 0x01ac > /sys/kernel/debug/mwifiex/mlan0/memrw cat /sys/kernel/debug/mwifiex/mlan0/memrw For writing FW memory location: echo w 0x01ac 0x55aa > /sys/kernel/debug/mwifiex/mlan0/memrw Signed-off-by:
Chin-ran Lo <crlo@marvell.com> Signed-off-by:
-
Daniel Drake authored
During usage of the new Bluetooth driver for Realtek devices, it was found that BT scans were inhibited for the RTL8723BE when wireless was active. The exact cause of this interference is not known yet, but a satisfactory work around has been found that does not seem to have any visible side effects. Signed-off-by:
Daniel Drake <drake@endlessm.com> Signed-off-by:
-
Okash Khawaja authored
The PCI cache line size value was being compared against decimal values prefixed with 0x. Fixed the literals to use the correct hex values. This has not been tested due to lack of hardware. However, the value in `cline` is PCI cache line size, which is the CPU's cache line size. It is less likely for cache line sizes to be 22 or 50, and more likely for them to be 16 or 32. Also, as far as I understand, cache line size is used for things like aligning DMA requests with CPU cache line, which improve performance but wouldn't break anything if the value doesn't match. In this case, we will fall through to the default case which leaves `reg` unchanged. Signed-off-by:
Okash Khawaja <okash.khawaja@gmail.com> Signed-off-by:
-
Okash Khawaja authored
This patch fixes these checkpatch.pl errors around a single switch-case block: ERROR: switch and case should be at the same indent ERROR: trailing statements should be on next line More specifically, the fix has been applied to the five occurances of the errors listed below. ERROR: switch and case should be at the same indent #1100: FILE: adm8211.c:1100: + switch (cline) { [...] + default: reg |= (0x0 << 14); ERROR: trailing statements should be on next line #1101: FILE: adm8211.c:1101: + case 0x8: reg |= (0x1 << 14); ERROR: trailing statements should be on next line #1103: FILE: adm8211.c:1103: + case 0x16: reg |= (0x2 << 14); ERROR: trailing statements should be on next line #1105: FILE: adm8211.c:1105: + case 0x32: reg |= (0x3 << 14); ERROR: trailing statements should be on next line #1107: FILE: adm8211.c:1107: + default: reg |= (0x0 << 14); Signed-off-by: -
Fu, Zhonghui authored
ACPI will manage WiFi chip's power state during suspend/resume process on some tablet platforms(such as ASUS T100TA). This is not supported by brcmfmac driver now, and the context of WiFi chip will be damaged after resume. This patch informs ACPI not to manage WiFi chip's power state. Signed-off-by:
Zhonghui Fu <zhonghui.fu@linux.intel.com> Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Taehee Yoo authored
parameter "infra_mode" of rtl92c_init_beacon_max_error() is not used. so i remove this. Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
Initialization routine set REG_BCN_MAX_ERR to 0xFF. also _rtl92cu_set_media_status set REG_BCN_MAX_ERR to same value. so i remove this code. Signed-off-by:
-
Lauri Kenttä authored
Signed-off-by:
Lauri Kenttä <lauri.kentta@gmail.com> Signed-off-by:
-
- 25 May, 2015 22 commits
-
-
Kalle Valo authored
Major changes: ath10k: * qca6174 power consumption improvements, enable ASPM etc (Michal) wil6210: * support Wi-Fi Simple Configuration in STA mode
-
Hariprasad Shenai authored
Add support for flashing 10GBaseT adapter with BCM 84834 PHY and Aquantia AQ1202 PHY. Updating of the PHY firmware must happen before the INITIALIZE_CMD. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Add two more eBPF test cases for JITs, i.e. the second one revealed a bug in the x86_64 JIT compiler, where only an int3 filled image from the allocator was emitted and later wrongly set by the compiler as the bpf_func program code since optimization pass boundary was surpassed w/o actually emitting opcodes. Interpreter: [ 45.782892] test_bpf: #242 BPF_MAXINSNS: Very long jump backwards jited:0 11 PASS [ 45.783062] test_bpf: #243 BPF_MAXINSNS: Edge hopping nuthouse jited:0 14705 PASS After x86_64 JIT (fixed): [ 80.495638] test_bpf: #242 BPF_MAXINSNS: Very long jump backwards jited:1 6 PASS [ 80.495957] test_bpf: #243 BPF_MAXINSNS: Edge hopping nuthouse jited:1 17157 PASS Reference: http://thread.gmane.org/gmane.linux.network/364729Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
David S. Miller authored
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver updates 2015-05-22 The following patches are included in this driver update series: - Retrieve and set an additional hardware feature setting - Fix the initial mode/speed determination when auto-negotiation is disabled - Add additional netif_dbg support to the driver This patch series is based on net-next. ==================== Signed-off-by: -
Lendacky, Thomas authored
Change more netdev_dbg statements over to netif_dbg and add some new netif_dbg statements to the driver. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Lendacky, Thomas authored
When the ethtool command is used to set the speed of the device while the device is down, the check to set the initial mode may fail when the device is brought up, causing failure to bring the device up. Update the code to set the initial mode based on the desired speed if auto-negotiation is disabled. Signed-off-by:
-
Lendacky, Thomas authored
The device private data structure contains all the defined hardware features for the device. However one of the features is not set. Even though the feature is not currently used, set it to avoid future issues of the feature being checked thinking it has been properly set. Signed-off-by:
-
Florian Westphal authored
Send icmp pmtu error if we find that the largest fragment of df-skb exceeded the output path mtu. The ip output path will still catch this later on but we can avoid the forward/postrouting hook traversal by rejecting right away. This is what ipv6 already does. Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Hannes Frederic Sowa says: ==================== net: af_unix: zerocopy stream bits This series implements zerocopy support for AF_UNIX SOCK_STREAM sockets. Changelog in the specific patches. Thanks to all the reviewers! ==================== Signed-off-by: -
Hannes Frederic Sowa authored
unix_stream_recvmsg is refactored to unix_stream_read_generic in this patch and enhanced to deal with pipe splicing. The refactoring is inneglible, we mostly have to deal with a non-existing struct msghdr argument. Signed-off-by:
-
Hannes Frederic Sowa authored
Prepare skb_splice_bits to be able to deal with AF_UNIX sockets. AF_UNIX sockets don't use lock_sock/release_sock and thus we have to use a callback to make the locking and unlocking configureable. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hannes Frederic Sowa authored
This patch implements sendpage support for AF_UNIX SOCK_STREAM sockets. This is also required for a complete splice implementation. The implementation is a bit tricky because we append to already existing skbs and so have to hold unix_sk->readlock to protect the reading side from either advancing UNIXCB.consumed or freeing the skb at the socket receive tail. Signed-off-by:
-
Hannes Frederic Sowa authored
Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2015-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== ath10k: * enable channel 144 on 5 GHz * enable Adaptive Noise Immunity (ANI) by default * add Wake on Wireless LAN (WOW) patterns support * add basic Tunneled Direct Link Setup (TDLS) support * add multi-channel support for QCA6174 * enable IBSS RSN support * enable Bluetooth Coexistance whenever firmware supports it * add more versatile way to set bitrates used by the firmware ath9k: * spectral scan: add support for multiple FFT frames per report iwlwifi: * major rework of the scan code (Luca) * some work on the thermal code (Chaya Rachel) * some work on the firwmare debugging infrastructure brcmfmac: * SDIO suspend and resume fixes * wiphy band info and changes in regulatory settings * add support for BCM4324 SDIO and BCM4358 PCIe * enable support of PCIe devices on router platforms (Hante) ==================== Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== mlx4: Enable single ported VFs over IB ports This series further enhances the support for mlx4 single ported VFs introduced in 3.15 to work over IB ports too. Just as quick reminder, the ConnectX3 device family exposes one PCI device which serves both ports. This can be non-optimal under virtualization schemes where the admin would like the VF to expose one interface to the VM, etc. Since all the VF interaction with the firmware passes through the PF driver, we can emulate to the VF they have one port, and further create a set of the VFs which act on port1 of the device and another set which acts on port2. ==================== Signed-off-by: -
Or Gerlitz authored
Remove the limitation that disallows configuring single ported VFs in the presence of IB ports, after addressing the issues that prevented that to work. SMI (QP0) requests/responses are still not supported for single ported IB VFs. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Or Gerlitz authored
It's legal for drivers to provide the QP port through the QPC schedule-queue field on the reset-to-init QP state change. Add adjusting of the schedule queue port in the SRIOV wrapper for that operation too. Signed-off-by:
-
Or Gerlitz authored
Some VF drivers flow set the schedule queue in the QP context but without setting none of OPTPAR_SCHED_QUEUE or OPTPAR_PRIMARY_ADDR_PATH. To allow for such non-modified drivers to function as single ported IB VFs, we must adjust the schedule queue port whenever being set, e.g as currently done for single ported Eth VFs. Signed-off-by:
-
Or Gerlitz authored
As part of enabling single ported VFs over IB ports we need to handle some of the flows for generting EQ events for VFs which don't come into play under Eth ports. This mainly includes port management events derived from changes of the phyiscal port (lid change, client re-register, down/up, etc), VF pkey table changes and VF guid changes initiated by the IB driver. (1) make sure that events are generated only for VFs sitting on the relevant physical port (under the ALL_SLAVES flow). (2) before generating the event, convert from physical (one or two) to VF port (always equals one). Signed-off-by: -
Or Gerlitz authored
When multiplexling a MAD sent from VF, we should convert the port used by the guest to send the packet to the actual physical port which will be used to transmit the packet, before building the relevant address-handle (AH). This is needed under VPI for single ported VFs, since the code that builds the AH (mlx4_ib_query_ah()) makes decisions based on the input port. If we use the port number provided by the guest, it might have different protocol vs. the one this packat has to go from, and hence the result could be wrong. So far, the conversion was done after the AH was built and it worked for single ported Eth VFs which were not enabled under VPI. When adding support for single ported IB VFs and VPI, we hit that. Fixes: 449fc488 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by:
-
Or Gerlitz authored
Single port VFs always provide port = 1 (even if the actual physical port used is port 2). As such, we need to convert the port provided by the VF to the physical port before calling into the firmware. It turns out that the Linux mlx4 VF RoCE driver maintains a copy of the GID table and hence this change became critical only for single ported IB VFs, but it could be needed for other RoCE VF drivers too. Fixes: 449fc488 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
