- 15 Jan, 2020 2 commits
-
-
Samuel Holland authored
Instead of ad-hoc variant ID checks throughout the code, let's start moving the variant-specific details to a match structure. This allows for future flexibility, and it better matches the other axp20x power supply drivers. This commit removes most variant checks from axp20x_usb_power_probe(). Other parts of the driver still do ID matching; they are left unchanged for now. Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com>
-
Chen Wandun authored
Fix the following sparse warning: drivers/power/supply/ucs1002_power.c:492:5: warning: symbol 'ucs1002_regulator_enable' was not declared. Should it be static? Fixes: a3d70dac ("power: suppy: ucs1002: disable power when max current is 0") Signed-off-by:
Chen Wandun <chenwandun@huawei.com> Signed-off-by:
-
- 14 Jan, 2020 13 commits
-
-
Claudiu Beznea authored
SAM9X60's PMC uses different offset for master clock register. Add a member of type struct pmc_reg_config in struct reg_config, fill it correspondingly for SAMA5D2 and SAM9X60 and use it in poweroff() function. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Claudiu Beznea authored
This driver uses AT91_PMC_MCKR in poweroff() function. But the SAM9X60's PMC versions maps AT91_PMC_MCKR functionality at different offset compared to the SAMA5D2's one. This patch prepares the field so that different AT91_PMC_MCKR's offsets to be introduced in struct reg_config so that proper offset to be used for AT91_PMC_MCKR based on compatible string. Signed-off-by:
-
Yauhen Kharuzhy authored
Add bq25892, bq25895 and bq25896 to list of supported device IDs for DeviceTree and I2C. Signed-off-by:
Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by:
-
Yauhen Kharuzhy authored
Add bq25892, bq25895 and bq25896 to list of supported device IDs in the bq25890 DT binding document. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Yauhen Kharuzhy authored
Support BQ25892 and BQ25896 chips by this driver. They shared one chip ID 0, so distinquish them by device revisions (2 for 25896 and 1 for 25892). Signed-off-by:
-
Dan Murphy authored
Add the "Over Current" string to /sys/class/power_supply/<supply_name>/health description. Fixes: e3e83cc6 ("power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constant") Signed-off-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Dan Carpenter authored
The "mode" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 51d07566 ("bq20z75: Add support for charge properties") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Sven Van Asbroeck authored
This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This could mean that the work function is still running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that that the work is properly cancelled, no longer running, and unable to re-schedule itself. This issue was detected with the help of Coccinelle. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by:
-
Marek Szyprowski authored
Don't disable IRQ wake feature without prior enabling it. This fixes following warning observed on Exynos3250-based Rinato board: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1288 at kernel/irq/manage.c:724 irq_set_irq_wake+0xfc/0x134 Unbalanced IRQ 83 wake disable Modules linked in: CPU: 0 PID: 1288 Comm: rtcwake Not tainted 5.5.0-rc5-next-20200110-00031-g6289fffbb3f5 #7266 Hardware name: Samsung Exynos (Flattened Device Tree) [<c0112e48>] (unwind_backtrace) from [<c010e090>] (show_stack+0x10/0x14) [<c010e090>] (show_stack) from [<c0b25b28>] (dump_stack+0xa4/0xd0) [<c0b25b28>] (dump_stack) from [<c0128088>] (__warn+0xf4/0x10c) [<c0128088>] (__warn) from [<c0128114>] (warn_slowpath_fmt+0x74/0xb8) [<c0128114>] (warn_slowpath_fmt) from [<c019e9a0>] (irq_set_irq_wake+0xfc/0x134) [<c019e9a0>] (irq_set_irq_wake) from [<c0772708>] (max17040_suspend+0x50/0x58) [<c0772708>] (max17040_suspend) from [<c05f55ac>] (dpm_run_callback+0xb4/0x400) [<c05f55ac>] (dpm_run_callback) from [<c05f5e38>] (__device_suspend+0x140/0x814) [<c05f5e38>] (__device_suspend) from [<c05f9548>] (dpm_suspend+0x16c/0x564) [<c05f9548>] (dpm_suspend) from [<c05fa2e4>] (dpm_suspend_start+0x90/0x98) [<c05fa2e4>] (dpm_suspend_start) from [<c01977f4>] (suspend_devices_and_enter+0xec/0xc0c) [<c01977f4>] (suspend_devices_and_enter) from [<c019862c>] (pm_suspend+0x318/0x3e8) [<c019862c>] (pm_suspend) from [<c01963cc>] (state_store+0x68/0xc8) [<c01963cc>] (state_store) from [<c03531a4>] (kernfs_fop_write+0x10c/0x220) [<c03531a4>] (kernfs_fop_write) from [<c02b44c4>] (__vfs_write+0x2c/0x1c4) [<c02b44c4>] (__vfs_write) from [<c02b7288>] (vfs_write+0xa4/0x180) [<c02b7288>] (vfs_write) from [<c02b74d0>] (ksys_write+0x58/0xcc) [<c02b74d0>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd6e83fa8 to 0xd6e83ff0) ... irq event stamp: 18028 hardirqs last enabled at (18027): [<c014b99c>] cancel_delayed_work+0x84/0xf8 hardirqs last disabled at (18028): [<c0b49b1c>] _raw_spin_lock_irqsave+0x1c/0x58 softirqs last enabled at (17876): [<c01026d8>] __do_softirq+0x4f0/0x5e4 softirqs last disabled at (17869): [<c0130d34>] irq_exit+0x16c/0x170 ---[ end trace 0728005730004e60 ]--- Fixes: 2e17ed94 ("power: supply: max17040: Add IRQ handler for low SOC alert") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Samuel Holland authored
This member of struct axp20x_usb_power is not used anywhere. Remove it. Reviewed-by:
-
Samuel Holland authored
The AC power supply input can be used as a wakeup source. Hook up the ACIN_PLUGIN IRQ to trigger wakeup based on userspace configuration. To do this, we must remember the list of IRQs for the life of the device. To know how much space to allocate for the flexible array member, we switch from using a NULL sentinel to using an array length. Because we now depend on the specific order of the IRQs (we assume ACIN_PLUGIN is first and always present), failing to acquire an IRQ during probe must be a fatal error. To avoid spuriously waking up the system when the AC power supply is not configured as a wakeup source, we must explicitly disable all non- wake IRQs during system suspend. This is because the SoC's NMI input is shared among all IRQs on the AXP PMIC. Due to the use of regmap-irq, the individual IRQs within the PMIC are nested threaded interrupts, and are therefore not automatically disabled during system suspend. The upshot is that if any other device within the MFD (such as the power key) is an enabled wakeup source, all enabled IRQs within the PMIC will cause wakeup. We still need to call enable_irq_wake() when we *do* want wakeup, in case those other wakeup sources on the PMIC are all disabled. Reviewed-by:
-
Samuel Holland authored
AXP803/AXP813 have a flag that enables/disables the AC power supply input. Allow control of this flag via the ONLINE property on those variants. Reviewed-by:
-
Samuel Holland authored
AXP803/AXP813 have a flag that enables/disables the AC power supply input. This flag does not affect the status bits in PWR_INPUT_STATUS. Its effect can be verified by checking the battery charge/discharge state (bit 2 of PWR_INPUT_STATUS), or by examining the current draw on the AC input. Take this flag into account when getting the ONLINE property of the AC input, on PMICs where this flag is present. Fixes: 7693b564 ("power: supply: add AC power supply driver for AXP813") Cc: stable@vger.kernel.org Signed-off-by:
-
- 19 Dec, 2019 23 commits
-
-
Ma Feng authored
Fixes coccicheck warning: drivers/power/supply/abx500_chargalg.c:1826:2-3: Unneeded semicolon Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Ma Feng <mafeng.ma@huawei.com> Signed-off-by:
-
Ma Feng authored
Fixes coccicheck warning: drivers/power/supply/ab8500_charger.c:1082:2-3: Unneeded semicolon drivers/power/supply/ab8500_charger.c:792:2-3: Unneeded semicolon drivers/power/supply/ab8500_charger.c:2430:2-3: Unneeded semicolon Reported-by:
-
Ma Feng authored
Fixes coccicheck warning: drivers/power/supply/ab8500_fg.c:2224:5-6: Unneeded semicolon drivers/power/supply/ab8500_fg.c:2227:4-5: Unneeded semicolon drivers/power/supply/ab8500_fg.c:2334:3-4: Unneeded semicolon drivers/power/supply/ab8500_fg.c:2342:3-4: Unneeded semicolon drivers/power/supply/ab8500_fg.c:2350:3-4: Unneeded semicolon drivers/power/supply/ab8500_fg.c:2358:3-4: Unneeded semicolon drivers/power/supply/ab8500_fg.c:2366:3-4: Unneeded semicolon Reported-by:
-
Jean-Francois Dagenais authored
"Battery mode" is the name of the register, the bit manipulated by this code is "CAPACITY_MODE" (Smart Battery System Specifications). Signed-off-by:
Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by:
-
Jean-Francois Dagenais authored
Symbolic permissions 'S_IRUSR | S_IRGRP | S_IROTH' are not preferred. Use octal permissions '0444'. Signed-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by:
-
Enric Balletbo i Serra authored
When a device has no support to get the charger number of ports, it doesn't have to result in a dev_err(), print saying "Could not get charger port count" using a dev_info() would suffice. In such case, the dev_info() message is already printed but the dev_err() is annoying, specially, on those devices that doesn't support the command. So remove the dev_err(). Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Matheus Castello authored
Notify core through power_supply_changed() in case of changes in state of charge and power supply status. This is useful for user-space to efficiently update current battery level. Signed-off-by:
Matheus Castello <matheus@castello.eng.br> Reviewed-by:
-
Matheus Castello authored
For configuration of fuel gauge alert for a low level state of charge interrupt we add a function to config level threshold and a device tree binding property to set it in flatned device tree node. Now we can use "maxim,alert-low-soc-level" property with the values from 1% up to 32% to configure alert interrupt threshold. Signed-off-by:
-
Matheus Castello authored
According datasheet max17040 has a pin for alert host for low SOC. This pin can be used as external interrupt, so we need to check for interrupts assigned for device and handle it. In handler we are checking and storing fuel gauge registers values and send an uevent to notificate user space, so user space can decide save work or turn off since the alert demonstrate that the battery may no have the power to keep the system turned on for much longer. Signed-off-by:
-
Matheus Castello authored
Documentation of max17040 based fuel gauge characteristics. For configure low level state of charge threshold alert signaled from max17043/max17044 we add "maxim,alert-low-soc-level" property. Signed-off-by:
-
Baolin Wang authored
There are some deviations between the real resistance and the ideal resistance of coulomb counter, which will affect the accuracy of the coulomb counter, thus calibrate the real resistance of coulomb counter to improve the accuracy. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
Baolin Wang <baolin.wang7@gmail.com> Signed-off-by:
-
Baolin Wang authored
dt-bindings: power: sc27xx: Add a new property to describe the real resistance of coulomb counter chip Add a new property to describe the real resistance of coulomb counter chip, which is used to calibrate the accuracy of the coulomb counter chip. Acked-by:
-
Yuanjiang Yu authored
Optimize the battery internal resistance in a certain temerature to get a accurate battery internal resistance. Signed-off-by:
Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by:
-
Baolin Wang authored
Since the battery internal resistance can be changed with the temperature changes, thus add a resistance temperature table support to look up the accurate battery internal resistance in a certain temperature. Signed-off-by:
-
Baolin Wang authored
dt-bindings: power: Introduce one property to describe the battery resistance with temperature changes Since the battery internal resistance can be changed as the temperature changes, thus add one table to describe the battery resistance percent in different temperatures to get a accurate battery internal resistance. Reviewed-by:
-
Bartosz Golaszewski authored
We need the of_match table if we want to use the compatible string in the pmic's child node and get the charger driver loaded automatically. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Angus Ainslie (Purism) authored
The MAX17055 is very similar to the MAX17042 so extend the driver. Signed-off-by:
Angus Ainslie (Purism) <angus@akkea.ca> Reviewed-by:
-
Angus Ainslie (Purism) authored
The bindings are missing documentation for some of the compatible strings. Signed-off-by:
-
Lucas Stach authored
For some devices userspace needs the ability to completely cut the power to the USB devices connected to the charge controller. An easy way to achieve this is by allowing 0 as a valid max current and forcibly disable the output in that case, as well as enable it again if the regulator is in use and a non-0 max current is set. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by:
-
Paul Cercueil authored
The ADC in the JZ4740 can work either in high-precision mode with a 2.5V range, or in low-precision mode with a 7.5V range. The code in place in this driver will select the proper scale according to the maximum voltage of the battery. The JZ4770 however only has one mode, with a 6.6V range. If only one scale is available, there's no need to change it (and nothing to change it to), and trying to do so will fail with -EINVAL. Fixes: fb24ccfb ("power: supply: add Ingenic JZ47xx battery driver.") Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Acked-by:
Artur Rojek <contact@artur-rojek.eu> Cc: stable@vger.kernel.org Signed-off-by:
-
Chuhong Yuan authored
The driver forgets to unregister the notifier in remove. Add the call to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
- 18 Dec, 2019 1 commit
-
-
Chris Packham authored
Don't generate an error message when devm_gpiod_get fails with -EPROBE_DEFER. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
-
- 08 Dec, 2019 1 commit
-
-
Linus Torvalds authored
-
