- 10 Jan, 2011 2 commits
-
-
Alex Deucher authored
Lots of HDMI TVs overscan the incoming image by default. The underscan option was added as a way to compensate for that by underscanning the image so that the edges would not be cut off on an overscanning TV. However, the TV provides no way of knowing whether it is overscanning or not. If the user has disabled overscan on their TV or has a TV that does not overscan, you will get black bars around the edges of your screen. Prior to the patch we got complaints and bug reports from users with overscanning TVs, now with the patch, we get lots of complaints and bug reports from users with non-overscanning TVs. There's no good default, but on average there have been more users complaining about it being on by default than off, so change it to off. This will probably result in a new deluge of overscanning TV user complaints. There's no winning. Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This avoids some issues in the current hdmi audio code for monitors without audio. Signed-off-by:
-
- 09 Jan, 2011 3 commits
-
-
Dave Airlie authored
* 'drm-radeon-ni' of ../drm-radeon-next: (30 commits) radeon: consolidate asic-specific function decls for pre-r600 drm/radeon/kms: add NI pci ids drm/radeon/kms: don't enable pcie gen2 on NI yet drm/radeon/kms: add radeon_asic struct for NI asics drm/radeon/kms/ni: load default sclk/mclk/vddc at pm init drm/radeon/kms: add ucode loader for NI drm/radeon/kms: add support for DCE5 display LUTs drm/radeon/kms: add ni_reg.h drm/radeon/kms: add bo blit support for NI drm/radeon/kms: always use writeback/events for fences on NI drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5 drm/radeon/kms: add backend map workaround for barts drm/radeon/kms: fill gpu init for NI asics drm/radeon/kms: add disabled vbios accessor for NI asics drm/radeon/kms: handle NI thermal controller drm/radeon/kms: parse DCE5 encoder caps when setting up encoders drm/radeon/kms: dvo dpms updates for DCE5 drm/radeon/kms: dac dpms updates for DCE5 drm/radeon/kms: DCE5 atom dig encoder updates drm/radeon/kms: DCE5 atom transmitter control updates ...
-
Chris Wilson authored
... or else we may end up disabling the wrong framebuffer, leading to an OOPS, e.g: [ 6033.229012] kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3271! [ 6033.229012] invalid opcode: 0000 [#1] SMP [ 6033.229012] last sysfs file: /sys/devices/virtual/backlight/acpi_video0/uevent [ 6033.229012] Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq mperf snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer thinkpad_acpi ppdev snd r852 sm_common iTCO_wdt uvcvideo i2c_i801 iTCO_vendor_support microcode wmi nand videodev nand_ids nand_ecc snd_page_alloc parport_pc parport mtd soundcore joydev v4l1_compat pcspkr uinput ipv6 sdhci_pci sdhci mmc_core yenta_socket i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan] [ 6033.229012] [ 6033.229012] Pid: 4834, comm: Xorg Not tainted 2.6.37-rc8+ #25 7661BL5/7661BL5 [ 6033.229012] EIP: 0060:[<f86fda5e>] EFLAGS: 00013246 CPU: 0 [ 6033.229012] EIP is at i915_gem_object_unpin+0x23/0x76 [i915] [ 6033.229012] EAX: f68a4000 EBX: f6831f00 ECX: 000600fa EDX: f68a8000 [ 6033.229012] ESI: f68a4014 EDI: f68a42b8 EBP: f2169c44 ESP: f2169c3c [ 6033.229012] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 6033.229012] Process Xorg (pid: 4834, ti=f2168000 task=f21c8000 task.ti=f2168000) [ 6033.229012] Stack: [ 6033.229012] f3a84800 f68a4014 f2169c54 f87045d8 f3a84800 f872d9a8 f2169c68 f7fd8091 [ 6033.229012] f3b952a4 00000000 f68a414c f2169cf0 f7fd9377 00000000 00000000 f7fd98b0 [ 6033.229012] f7fd9f4e 0000000f f7f328a0 00000000 00000000 00000000 f2169ca4 f68a414c [ 6033.229012] Call Trace: [ 6033.229012] [<f87045d8>] ? intel_crtc_disable+0x36/0x41 [i915] [ 6033.229012] [<f7fd8091>] ? drm_helper_disable_unused_functions+0xcd/0xf9 [drm_kms_helper] [ 6033.229012] [<f7fd9377>] ? drm_crtc_helper_set_config+0x62a/0x7f7 [drm_kms_helper] [ 6033.229012] [<c04daa10>] ? __slab_free+0x1b/0xa4 [ 6033.229012] [<f7fd7e62>] ? drm_fb_helper_initial_config+0x466/0x497 [drm_kms_helper] [ 6033.229012] [<f7fd7ea3>] ? drm_fb_helper_restore+0x10/0x2a [drm_kms_helper] [ 6033.229012] [<f86f2577>] ? i915_driver_lastclose+0x2a/0x57 [i915] [ 6033.229012] [<f7f1989f>] ? drm_lastclose+0x45/0x23e [drm] [ 6033.229012] [<f7f1a0b4>] ? drm_release+0x462/0x4d7 [drm] Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by:
-
Dave Airlie authored
* 'nouveau/drm-nouveau-next' of ../drm-nouveau-next: drm/nouveau: fix hwmon device binding drm/nouveau: create grctx on the fly on all chipsets drm/nvc0: fix init without firmware present drm/nvc0/pgraph: fix 0x406028/0x405870 init drm/nvc0/pgraph: more unit names drm/nvc0/pfifo: support for chipsets with only one PSUBFIFO (0xc1) drm/nvc0: reserve only subc 0 for kernel use drm/nv50: sync up gr data error names with rnn, use for nvc0 also drm/nvc0: parse a couple more PGRAPH_INTR drm/nvc0: nuke left-over debug messages drm/nvc0: kill off a couple more magics drm/nouveau: Validate channel indices passed from userspace. drm/nouveau: Only select ACPI_VIDEO if its dependencies are met
-
- 07 Jan, 2011 34 commits
-
-
Lucas Stach authored
Bind the hwmon structs to nouveau device kobj. This makes sure the hwmon files are created in the device subdir in line with all other hwmon drivers. Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Daniel Vetter authored
Move them to radeon_asic.h together with the other asic specific stuff. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Dan Carpenter authored
This is a copy-and-paste bug. We should be comparing 4 characters here instead of 3. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Still needs to be implemented. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
The vbios only partially initializes the memory controller on NI, so now we need to load the MC ucode in the driver and set the default clocks once the ucode is loaded. Signed-off-by:
-
Alex Deucher authored
The MC ucode is no longer loaded by the vbios tables as on previous asics. It now must be loaded by the driver. Signed-off-by:
-
Alex Deucher authored
The hardware supports advanced user defined color management but at the moment, there is no infrastructure in place to take advantage of it so for now we just support the legacy LUTs. Signed-off-by:
-
Alex Deucher authored
This adds some new NI (northern islands) specific display register defines. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
NI chips no longer load the MC ucode in the asic_init sequence so the asic comes up in a basic mode with low engine/memory clocks and a voltage. Once the MC ucode is loaded by the driver the card can be programmed to it's proper default clocks and voltage. As such the default clocks in the firmware info table as the post clocks, not the default running clocks. Track the default post clocks and default running clocks separately to handle this. Signed-off-by:
-
Alex Deucher authored
Same as Cypress. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Some systems disable the vbios on secondary cards or cards that have been posted. This code re-enabled the vbios so the driver can load it. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Needed to tell which DIG encoders are HBR2 capable for DP 1.2. Signed-off-by:
-
Alex Deucher authored
The DVOOutputControl table was removed for DCE5. DVOEncoderControl now handles everything. Signed-off-by:
-
Alex Deucher authored
The DAC1OutputControl table was removed for DCE5. DAC1EncoderControl now handles everything. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
only fusion asics are dce4.1 Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Supported on rv6xx/r7xx/evergreen. Cards come up in gen1 mode. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
James Simmons authored
If you change the color depth via fbset or some other framebuffer aware userland application struct fb_fix_screeninfo is not updated to this new information. This patch fixes this issue. Also the function is changed to just pass in struct drm_framebuffer so in the future we could use more fields. I'm hoping some day fix->smem* could be set here :-) Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
- 06 Jan, 2011 1 commit
-
-
Ben Skeggs authored
Signed-off-by:
-
