Replace original report descriptor dumps in the comments with links to tablet
descriptions in a wiki, to make code clearer.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Replace original report descriptor dumps in the comments with links to tablet
descriptions in a wiki, to make code clearer.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for three KYE tablets: EasyPen i405X, MousePen i608X, EasyPen M610X.
Update Kconfig entry accordingly, remove EXPERT dependency.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Reported-by: Andreas Hübner <andreas@k4n.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The driver currently only supports the PS1000 controller.
It fixes the report descriptor by removing a non-existing axis and
clearing the constant bit on the d-pad and button input reports.
Signed-off-by: Andreas Hübner <andreas@k4n.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Before commit 534a7b8e ("HID: Add full support for Logitech Unifying
receivers") Logitech Unifying receiver can work as generic device
without special driver, after that commit these devices does not works
without special driver.

After this patch they will use generic driver if special driver is disabled.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Also correct the quirks for the Super Joy Box 3 Pro and Super Dual Box.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The name reported by Inutos4 WL connected by bluetooth is "PTK-540WL" and
to make it consistent with other Wacom devices it has to be converted to
"Wacom Intuos4 WL". It also makes userland applications aware that it's
a Wacom device.

This aligns naming of device to same used when this device is plugged into USB
port and controlled by USB wacom driver; and thus helps align userland logic to
route to apps like xf86-input-wacom.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

CH Fighterstick requires HID_QUIRK_NOGET as many other CH devices do. This
patch adds device id for Fighterstick and adds necessary line to HID quirk
list.
Signed-off-by: Ville Ranki <ville.ranki@iki.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for Waltop Q Pad by fixing its report descriptor.

This tablet is also sold as Aiptek HyperPen Mini. Other possible names
include: NGS Flexi Style, VisTablet PenPad, iVistaTablet Q Flex Pad, Bravod
Q-PD65-S.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Fix mismatch between Kconfig name and Makefile expectation.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This patch finishes off adding full support for the TiVo Slide remote,
which is a mostly pure HID device from the perspective of the kernel.
There are a few mappings that use a vendor-specific usage page, and a
few keys in the consumer usage page that I think make sense to remap
slightly, to better fit their key labels' intended use. Doing this in a
stand-alone hid-tivo.c makes the modifications only matter for this
specific device.

What's actually connected to the computer is a Broadcom-made usb dongle,
which has an embedded hub, bluetooth adapter, mouse and keyboard
devices. You pair with the dongle, then the remote sends data that its
converted into HID on the keyboard interface (the mouse interface
doesn't do anything interesting, so far as I can tell).

lsusb for this device:
Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp.
Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp.
Bus 004 Device 003: ID 150a:1201
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)

Speaking of the keyboard interface, the remote actually does contain a
keyboard as well. The top slides away, revealing a reasonably functional
qwerty keyboard (not unlike many slide cell phones), thus the product
name.

CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for the camera key. The hotkey for
Asus S.H.E(Super Hybrid Engine) mode is mapped to KEY_KEY_PROG1
just for notifying the userspace.
Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Asus All-In-One PC has a wireless keyboard with wifi toggle,
brightness up, brightness down and display off hotkeys.

This patch adds suppoort for these hotkeys.
Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
  hid-input/battery: add FEATURE quirk
  hid-input/battery: remove battery_val
  hid-input/battery: power-supply type really *is* a battery
  hid-input/battery: make the battery setup common for INPUTs and FEATUREs
  hid-input/battery: deal with both FEATURE and INPUT report batteries
  hid-input/battery: add quirks for battery
  hid-input/battery: remove apparently redundant kmalloc
  hid-input: add support for HID devices reporting Battery Strength
  HID: hid-multitouch: add support 9 new Xiroku devices
  HID: multitouch: add support for 3M 32"
  HID: multitouch: add support of Atmel multitouch panels
  HID: usbhid: defer LED setting to a workqueue
  HID: usbhid: hid-core: submit queued urbs before suspend
  HID: usbhid: remove LED_ON
  HID: emsff: use symbolic name instead of hardcoded PID constant
  HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus II
  HID: Kconfig: fix syntax
  HID: introduce proper dependency of HID_BATTERY on POWER_SUPPLY
  HID: multitouch: support PixArt optical touch screen
  HID: make parser more verbose about parsing errors by default
  ...

Fix up rename/delete conflict in drivers/hid/hid-hyperv.c (removed in
staging, moved in this branch) and similarly for the rules for same file
in drivers/staging/hv/{Kconfig,Makefile}.

SCSI updates for post 3.2 merge window

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (67 commits)
  [SCSI] lpfc 8.3.28: Update driver version to 8.3.28
  [SCSI] lpfc 8.3.28: Add Loopback support for SLI4 adapters
  [SCSI] lpfc 8.3.28: Critical Miscellaneous fixes
  [SCSI] Lpfc 8.3.28: FC and SCSI Discovery Fixes
  [SCSI] lpfc 8.3.28: Add support for ABTS failure handling
  [SCSI] lpfc 8.3.28: SLI fixes and added SLI4 support
  [SCSI] lpfc 8.3.28: Miscellaneous fixes in sysfs and mgmt interfaces
  [SCSI] mpt2sas: Removed redundant calling of _scsih_probe_devices() from _scsih_probe
  [SCSI] mac_scsi: Remove obsolete IRQ_FLG_* users
  [SCSI] qla4xxx: Update driver version to 5.02.00-k10
  [SCSI] qla4xxx: check for FW alive before calling chip_reset
  [SCSI] qla4xxx: Fix qla4xxx_dump_buffer to dump buffer correctly
  [SCSI] qla4xxx: Fix the IDC locking mechanism
  [SCSI] qla4xxx: Wait for disable_acb before doing set_acb
  [SCSI] qla4xxx: Don't recover adapter if device state is FAILED
  [SCSI] qla4xxx: fix call trace on rmmod with ql4xdontresethba=1
  [SCSI] qla4xxx: Fix CPU lockups when ql4xdontresethba set
  [SCSI] qla4xxx: Perform context resets in case of context failures.
  [SCSI] iscsi class: export pid of process that created
  [SCSI] mpt2sas: Remove unused duplicate diag_buffer_enable param
  ...

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: omap_wdt.c: fix the WDIOC_GETBOOTSTATUS ioctl if not implemented.
  watchdog: new driver for VIA chipsets
  watchdog: ath79_wdt: flush register writes
  drivers/watchdog/lantiq_wdt.c: drop iounmap for devm_ allocated data
  watchdog: documentation: describe nowayout in coversion-guide
  watchdog: documentation: update index file
  watchdog: Convert wm831x driver to devm_kzalloc()
  watchdog: add nowayout helpers to Watchdog Timer Driver Kernel API
  watchdog: convert drivers/watchdog/* to use module_platform_driver()
  watchdog: Use DEFINE_SPINLOCK() for static spinlocks
  watchdog: Convert Wolfson drivers to module_platform_driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits)
  regulator: set constraints.apply_uV to 0 in of_get_fixed_voltage_config
  regulator: max8925: fix enabled/disabled judgement mistake
  regulator: add regulator_bulk_force_disable function
  regulator: pass regulator_register of_node in fixed voltage driver
  regulator: add regulator_force_disable() definition for !CONFIG_REGULATOR
  regulator: Enable supply regulator if child rail is enabled.
  regulator: mc13892: Convert to devm_kzalloc()
  regulator: mc13783: Convert to devm_kzalloc()
  regulator: Fix checking return value of create_regulator
  regulator: Fix the error handling if create_regulator fails
  regulator: Export regulator_is_supported_voltage()
  regulator: mc13892: add device tree probe support
  regulator: mc13892: remove the unnecessary prefix from regulator name
  regulator: Convert wm831x regulator drivers to devm_kzalloc()
  regulator: da9052: Staticize non-exported symbols
  regulator: Replace kzalloc with devm_kzalloc and if-else with a switch-case for da9052-regulator
  regulator: Update da9052-regulator for DT changes
  regulator: DA9052/53 Regulator support
  regulator: pass device_node to of_get_regulator_init_data()
  regulator: If a single voltage is set with device tree then set apply_uV
  ...

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (31 commits)
  pinctrl: remove unnecessary max pin number
  pinctrl: correct a offset while enumerating pins
  pinctrl: some typo fixes
  pinctrl: rename U300 and SIRF pin controllers
  pinctrl: pass name instead of device to pin_config_*
  pinctrl: add "struct seq_file;" to pinconf.h
  pinctrl: conjure names for unnamed pins
  pinctrl: add a group-specific hog macro
  pinctrl: don't create a device for each pin controller
  arm/u300: don't use PINMUX_MAP_PRIMARY*
  pinctrl: implement PINMUX_MAP_SYS_HOG
  pinctrl: add a pin config interface
  pinctrl/coh901: driver to request its pins
  pinctrl: u300-pinmux: register proper GPIO ranges
  pinctrl: move the U300 GPIO driver to pinctrl
  ARM: u300: localize GPIO assignments
  pinctrl: make it possible to add multiple maps
  pinctrl: make a copy of pinmux map
  pinctrl: GPIO direction support for muxing
  pinctrl: print pin range in GPIO range debugs
  ...

* 'upstream-linus' of git://github.com/jgarzik/libata-dev:
  ahci: support the STA2X11 I/O Hub
  pata_bf54x: fix BMIDE status register emulation
  ata: add ata port hibernate callbacks
  ata: update ata port's runtime status during system resume
  [SCSI] runtime resume parent for child's system-resume
  ahci: platform support for suspend/resume
  libata-core: kill duplicate statement in ata_do_set_mode()
  pata_of_platform: remove direct dependency on OF_IRQ
  SATA/PATA: convert drivers/ata/* to use module_platform_driver()
  pata_cs5536: forward port changes from cs5536
  libata-sff: use ATAPI_{COD|IO}
  ata: add ata port runtime PM callbacks
  ata: add ata port system PM callbacks
  [SCSI] sd: check runtime PM status in sd_shutdown
  [SCSI] check runtime PM status in system PM
  [SCSI] add flag to skip the runtime PM calls on the host
  ata: make ata port as parent device of scsi host
  ahci: start engine only during soft/hard resets

* 'stable/for-linus-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (37 commits)
  xen/pciback: Expand the warning message to include domain id.
  xen/pciback: Fix "device has been assigned to X domain!" warning
  xen/pciback: Move the PCI_DEV_FLAGS_ASSIGNED ops to the "[un|]bind"
  xen/xenbus: don't reimplement kvasprintf via a fixed size buffer
  xenbus: maximum buffer size is XENSTORE_PAYLOAD_MAX
  xen/xenbus: Reject replies with payload > XENSTORE_PAYLOAD_MAX.
  Xen: consolidate and simplify struct xenbus_driver instantiation
  xen-gntalloc: introduce missing kfree
  xen/xenbus: Fix compile error - missing header for xen_initial_domain()
  xen/netback: Enable netback on HVM guests
  xen/grant-table: Support mappings required by blkback
  xenbus: Use grant-table wrapper functions
  xenbus: Support HVM backends
  xen/xenbus-frontend: Fix compile error with randconfig
  xen/xenbus-frontend: Make error message more clear
  xen/privcmd: Remove unused support for arch specific privcmp mmap
  xen: Add xenbus_backend device
  xen: Add xenbus device driver
  xen: Add privcmd device driver
  xen/gntalloc: fix reference counts on multi-page mappings
  ...

Merge branch 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

* 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/mmu: Fix compile errors introduced by x86/memblock mismerge.

* 'kvm-updates/3.3' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (74 commits)
  KVM: PPC: Whitespace fix for kvm.h
  KVM: Fix whitespace in kvm_para.h
  KVM: PPC: annotate kvm_rma_init as __init
  KVM: x86 emulator: implement RDPMC (0F 33)
  KVM: x86 emulator: fix RDPMC privilege check
  KVM: Expose the architectural performance monitoring CPUID leaf
  KVM: VMX: Intercept RDPMC
  KVM: SVM: Intercept RDPMC
  KVM: Add generic RDPMC support
  KVM: Expose a version 2 architectural PMU to a guests
  KVM: Expose kvm_lapic_local_deliver()
  KVM: x86 emulator: Use opcode::execute for Group 9 instruction
  KVM: x86 emulator: Use opcode::execute for Group 4/5 instructions
  KVM: x86 emulator: Use opcode::execute for Group 1A instruction
  KVM: ensure that debugfs entries have been created
  KVM: drop bsp_vcpu pointer from kvm struct
  KVM: x86: Consolidate PIT legacy test
  KVM: x86: Do not rely on implicit inclusions
  KVM: Make KVM_INTEL depend on CPU_SUP_INTEL
  KVM: Use memdup_user instead of kmalloc/copy_from_user
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: new helper - d_make_root()
  dcache: use a dispose list in select_parent
  ceph: d_alloc_root() may fail
  ext4: fix failure exits
  isofs: inode leak on mount failure

d_alloc_root() with iput() in case of allocation failure...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

select_parent currently abuses the dentry cache LRU to provide
cleanup features for child dentries that need to be freed. It moves
them to the tail of the LRU, then tells shrink_dcache_parent() to
calls __shrink_dcache_sb to unconditionally move them to a dispose
list (as DCACHE_REFERENCED is ignored). __shrink_dcache_sb() has to
relock the dentries to move them off the LRU onto the dispose list,
but otherwise does not touch the dentries that select_parent() moved
to the tail of the LRU. It then passses the dispose list to
shrink_dentry_list() which tries to free the dentries.

IOWs, the use of __shrink_dcache_sb() is superfluous - we can build
exactly the same list of dentries for disposal directly in
select_parent() and call shrink_dentry_list() instead of calling
__shrink_dcache_sb() to do that. This means that we avoid long holds
on the lru lock walking the LRU moving dentries to the dispose list
We also avoid the need to relock each dentry just to move it off the
LRU, reducing the numebr of times we lock each dentry to dispose of
them in shrink_dcache_parent() from 3 to 2 times.

Further, we remove one of the two callers of __shrink_dcache_sb().
This also means that __shrink_dcache_sb can be moved into back into
prune_dcache_sb() and we no longer have to handle referenced
dentries conditionally, simplifying the code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
  sparc32: remove unused file: include/asm/pgtsun4.h
  sparc32: fix PAGE_SIZE definition
  sparc32: enable different preemptions models
  sparc32: support atomic64_t
  apbuart: fix section mismatch warning
  sparc32: drop useless preprocessor conditional in atomic_32.h
  sparc32: drop unused atomic24 support

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  igmp: Avoid zero delay when receiving odd mixture of IGMP queries
  netdev: make net_device_ops const
  bcm63xx: make ethtool_ops const
  usbnet: make ethtool_ops const
  net: Fix build with INET disabled.
  net: introduce netif_addr_lock_nested() and call if when appropriate
  net: correct lock name in dev_[uc/mc]_sync documentations.
  net: sk_update_clone is only used in net/core/sock.c
  8139cp: fix missing napi_gro_flush.
  pktgen: set correct max and min in pktgen_setup_inject()
  smsc911x: Unconditionally include linux/smscphy.h in smsc911x.h
  asix: fix infinite loop in rx_fixup()
  net: Default UDP and UNIX diag to 'n'.
  r6040: fix typo in use of MCR0 register bits
  net: fix sock_clone reference mismatch with tcp memcontrol

clock management changes for i.MX

Another simple series related to clock management, this time only for
imx.

* tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: mxs: select HAVE_CLK_PREPARE for clock
  clk: add config option HAVE_CLK_PREPARE into Kconfig
  ASoC: mxs-saif: convert to clk_prepare/clk_unprepare
  video: mxsfb: convert to clk_prepare/clk_unprepare
  serial: mxs-auart: convert to clk_prepare/clk_unprepare
  net: flexcan: convert to clk_prepare/clk_unprepare
  mtd: gpmi-lib: convert to clk_prepare/clk_unprepare
  mmc: mxs-mmc: convert to clk_prepare/clk_unprepare
  dma: mxs-dma: convert to clk_prepare/clk_unprepare
  net: fec: add clk_prepare/clk_unprepare
  ARM: mxs: convert platform code to clk_prepare/clk_unprepare
  clk: add helper functions clk_prepare_enable and clk_disable_unprepare

Fix up trivial conflicts in drivers/net/ethernet/freescale/fec.c due to
commit 0ebafefc ("net: fec: add clk_prepare/clk_unprepare") clashing
trivially with commit e163cc97 ("net/fec: fix the .remove code").

timer changes for msm

A very simple series. We used to have more churn in the timer
area, so this is kept separate. Will probably put this into the
drivers series next time.

* tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  msm: timer: Use clockevents_config_and_register()
  msm: timer: Setup interrupt after registering clockevent
  msm: timer: Remove SoC specific #ifdefs
  msm: timer: Remove msm_clocks[] and simplify code
  msm: timer: Fix ONESHOT mode interrupts
  msm: timer: Use GPT for clockevents and DGT for clocksource
  msm: timer: Cleanup #includes and #defines
  msm: timer: Tighten #ifdef for local timer support

power management changes for omap and imx

A significant part of the changes for these two platforms went into
power management, so they are split out into a separate branch.

* tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits)
  ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1
  ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation
  ARM: imx6q: resume PL310 only when CACHE_L2X0 defined
  ARM: imx6q: build pm code only when CONFIG_PM selected
  ARM: mx5: use generic irq chip pm interface for pm functions on
  ARM: omap: pass minimal SoC/board data for UART from dt
  arm/dts: Add minimal device tree support for omap2420 and omap2430
  omap-serial: Add minimal device tree support
  omap-serial: Use default clock speed (48Mhz) if not specified
  omap-serial: Get rid of all pdev->id usage
  ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init
  ARM: OMAP4: PRM: use PRCM interrupt handler
  ARM: OMAP3: pm: use prcm chain handler
  ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad
  ARM: OMAP2+: mux: add support for PAD wakeup interrupts
  ARM: OMAP: PRCM: add suspend prepare / finish support
  ARM: OMAP: PRCM: add support for chain interrupt handler
  ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier
  ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup
  ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list
  ...

Driver specific changes

Again, a lot of platforms have changes in here: pxa, samsung, omap,
at91, imx, ...

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: sa1100: clean up of the clock support
  ARM: pxa: add dummy clock for sa1100-rtc
  RTC: sa1100: support sa1100, pxa and mmp soc families
  RTC: sa1100: remove redundant code of setting alarm
  RTC: sa1100: Clean out ost register
  Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq()
  pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()
  ARM: EXYNOS: Modified files for SPI consolidation work
  ARM: S5P64X0: Enable SDHCI support
  ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names
  ARM: S5P64X0: Add HSMMC setup for host Controller
  ARM: EXYNOS: Add USB OHCI support to ORIGEN board
  USB: Add Samsung Exynos OHCI diver
  ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
  ARM: EXYNOS: Add USB OHCI device
  net: macb: fix build break with !CONFIG_OF
  i2c: tegra: Support DVC controller in device tree
  i2c: tegra: Add __devinit/exit to probe/remove
  net/at91_ether: use gpio_is_valid for phy IRQ line
  ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT
  ...

New feature development

This adds support for new features, and contains stuff from most
platforms. A number of these patches could have fit into other
branches, too, but were small enough not to cause too much
confusion here.

* tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  mfd/db8500-prcmu: remove support for early silicon revisions
  ARM: ux500: fix the smp_twd clock calculation
  ARM: ux500: remove support for early silicon revisions
  ARM: ux500: update register files
  ARM: ux500: register DB5500 PMU dynamically
  ARM: ux500: update ASIC detection for U5500
  ARM: ux500: support DB8520
  ARM: picoxcell: implement watchdog restart
  ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C
  ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1
  ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4
  ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3
  ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3
  ARM: Orion: Remove address map info from all platform data structures
  ARM: Orion: Get address map from plat-orion instead of via platform_data
  ARM: Orion: mbus_dram_info consolidation
  ARM: Orion: Consolidate the address map setup
  ARM: Kirkwood: Add configuration for MPP12 as GPIO
  ARM: Kirkwood: Recognize A1 revision of 6282 chip
  ARM: ux500: update the MOP500 GPIO assignments
  ...

Board-level changes

This adds and extends support for specific boards on a number of
ARM platforms:  omap, imx, samsung, tegra, ...

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
  Enable 32 bit flash support for iMX21ADS board
  ARM: mx31pdk: Add MC13783 RTC support
  iomux-mx25: configuration to support CSPI3 on CSI pins
  MX1:apf9328: Add i2c support
  mioa701: add newly available DoC G3 chip
  arm/tegra: remove __initdata annotation from pinmux tables
  arm/tegra: Use bus notifiers to trigger pinmux setup
  arm/tegra: Refactor board-*-pinmux.c to share code
  arm/tegra: Fix mistake in Trimslice's pinmux
  arm/tegra: Rework Seaboard-vs-Ventana pinmux table
  arm/tegra: Remove useless entries from ventana_pinmux[]
  arm/tegra: PCIe: Remove include of mach/pinmux.h
  arm/tegra: Harmony PCIe: Don't touch pinmux
  arm/tegra: Add AUXDATA for tegra-pinmux and tegra-gpio
  arm/tegra: Split Seaboard GPIO table to allow for Ventana
  ARM: imx6q: generate imx6q dtb files
  arm/imx6q: Rename Sabreauto to Armadillo2
  arm/imx6q-sabrelite: add enet phy ksz9021rn fixup
  arm/imx6: add imx6q sabrelite board support
  dts/imx: rename uart labels to consistent with hw spec
  ...

SoC-level changes for tegra and omap

This adds support for the new tegra30 SoC, as well as small
changes to support minor variations of existing omap SoCs.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  arm/tegra: Compile tegra_dt_init_irq only when CONFIG_OF
  arm/tegra: Make MACH_TEGRA_DT depend on ARCH_TEGRA_2x_SOC
  arm/tegra: Delete tegra_init_clock()
  arm/tegra: Fix section mismatch errors in tegra30 pinmux
  arm/tegra: Fix section mismatch errors in tegra20 pinmux
  arm/tegra: refresh defconfig for tegra30
  arm/tegra: add support for tegra30 based board cardhu
  arm/tegra: implement support for tegra30
  arm/tegra: pinmux tables and definitions for tegra30
  arm/tegra: add new fields to struct tegra_pingroup_desc
  arm/tegra: prepare pinmux code for multiple tegra variants
  arm/tegra: rename tegra20 pinmux files
  arm/tegra: generalize L2 cache initialization
  arm/tegra: use PMC reset
  arm/tegra: rename board-dt.c to board-dt-tegra20.c
  arm/tegra: prepare early init for multiple tegra variants
  arm/tegra: don't export clk_measure_input_freq
  arm/tegra: prepare clock code for multiple tegra variants
  arm/tegra: cleanup tegra20 support
  arm/tegra: clk_get should not be fatal
  ...

Fix up trivial conflict in arch/arm/mach-tegra/board-dt-tegra20.c

Cleanups for the Samsung platforms

Various cleanup changes that the device driver changes are built upon.
Since the samsung cleanups depend on the device tree series, which
depends on the first set of cleanups for tegra.

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: EXYNOS: Use gpio_request_one
  ARM: S5PV210: Use gpio_request_one
  ARM: S3C64XX: Modified according to SPI consolidation work
  ARM: S5PV210: Modified files for SPI consolidation work
  ARM: S5P64X0: Modified files for SPI consolidation work
  ARM: S5PC100: Modified files for SPI consolidation work
  ARM: S3C64XX: Modified files for SPI consolidation work
  ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung
  ARM: SAMSUNG: Remove SPI bus clocks from platform data
  ARM: S5PV210: Add SPI clkdev support
  ARM: S5P64X0: Add SPI clkdev support
  ARM: S5PC100: Add SPI clkdev support
  ARM: S3C64XX: Add SPI clkdev support
  spi/s3c64xx: Use bus clocks created using clkdev
  mmc: sdhci-s3c: Use generic clock names for sdhci bus clock options
  ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
  ARM: SAMSUNG: Remove SDHCI bus clocks from platform data
  ARM: SAMSUNG: Use kmemdup rather than duplicating its implementation
  ARM: EXYNOS: remove exynos4_scu_enable()

Device tree conversions for samsung and tegra

Both platforms had some initial device tree support, but this adds
much more to actually make it usable.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN
  ARM: EXYNOS: Add Exynos4 device tree enabled board file
  rtc: rtc-s3c: Add device tree support
  input: samsung-keypad: Add device tree support
  ARM: S5PV210: Modify platform data for pl330 driver
  ARM: S5PC100: Modify platform data for pl330 driver
  ARM: S5P64x0: Modify platform data for pl330 driver
  ARM: EXYNOS: Add a alias for pdma clocks
  ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build
  ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers
  DMA: PL330: Add device tree support
  ARM: EXYNOS: Modify platform data for pl330 driver
  DMA: PL330: Infer transfer direction from transfer request instead of platform data
  DMA: PL330: move filter function into driver
  serial: samsung: Fix build for non-Exynos4210 devices
  serial: samsung: add device tree support
  serial: samsung: merge probe() function from all SoC specific extensions
  serial: samsung: merge all SoC specific port reset functions
  ARM: SAMSUNG: register uart clocks to clock lookup list
  serial: samsung: remove all uses of get_clksrc and set_clksrc
  ...

Fix up fairly trivial conflicts in arch/arm/mach-s3c2440/clock.c and
drivers/tty/serial/Kconfig both due to just adding code close to
changes.

Cleanups on various subarchitectures

Cleanup patches for various ARM platforms and some of their associated
drivers, the bulk of these is for mach-91.

Arnd ended up pulling in the restart branch from Russell in order to
fix up some simple but annoying merge conflicts.

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  arm/at91: fix build of stamp9g20
  ARM: u300: delete memory.h
  MAINTAINERS: add maintainer entry for Picochip picoxcell
  ARM: picoxcell: move io mappings to common.c
  ARM: picoxcell: don't reserve irq_descs
  ARM: picoxcell: remove mach/memory.h
  ARM: at91: delete the pcontrol_g20_defconfig
  arm/tegra: Remove code that's ifndef CONFIG_ARM_GIC
  arm/tegra: remove unused defines
  arm/tegra: fix variable formatting in makefile
  ARM: davinci: vpif: move code to driver core header from platform
  ARM: at91/gpio: fix display of number of irq setuped
  ARM: at91/gpio: drop PIN_BASE
  ARM: at91/udc: use gpio_is_valid to check the gpio
  ARM: at91/ohci: use gpio_is_valid to check the gpio
  ARM: at91/nand: use gpio_is_valid to check the gpio
  ARM: at91/mmc: use gpio_is_valid to check the gpio
  ARM: at91/ide: use gpio_is_valid to check the gpio
  ARM: at91/pata: use gpio_is_valid to check the gpio
  ARM: at91/soc: use gpio_is_valid to check the gpio
  ...

Non-critical bug fixes

Simple bug fixes that were not considered important enough for inclusion
into 3.2.

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: update pxa and mmp
  ARM: pxa: Include linux/export.h in balloon3.c
  ARM: OMAP4: clock: Add CPU local timer clock node
  ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is not supported
  ARM: OMAP: AM3517/3505: fix crash on boot due to incorrect voltagedomain data
  ARM: OMAP: hwmod data: fix the panic on Nokia RM-680 during boot
  ARM: OMAP2+: DMA: Workaround for invalid destination position
  ARM: OMAP2+: DMA: Workaround for invalid source position