1. 14 May, 2019 1 commit
  2. 13 May, 2019 1 commit
  3. 10 May, 2019 3 commits
    • Jeremy Soller's avatar
      ALSA: hda/realtek - Corrected fixup for System76 Gazelle (gaze14) · 891afcf2
      Jeremy Soller authored
      A mistake was made in the identification of the four variants of the
      System76 Gazelle (gaze14). This patch corrects the PCI ID of the
      17-inch, GTX 1660 Ti variant from 0x8560 to 0x8551. This patch also
      adds the correct fixups for the 15-inch and 17-inch GTX 1650 variants
      with PCI IDs 0x8560 and 0x8561.
      
      Tests were done on all four variants ensuring full audio capability.
      
      Fixes: 80a5052d ("ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14)")
      Signed-off-by: default avatarJeremy Soller <jeremy@system76.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      891afcf2
    • Takashi Iwai's avatar
      ALSA: hda/realtek - Avoid superfluous COEF EAPD setups · c9af753f
      Takashi Iwai authored
      Realtek codec driver applied the COEF setups to change the EAPD
      control to the default mode (i.e. control by EPAD verbs) at the init
      callback.  It works, but this is too excessive at the same time, since
      it's called at each runtime PM resume.  That is, the initialization
      should be done only once after the probe.  One may think that moving
      this to the probe should be OK, but no -- there is a catch; when a
      system resumes from S4 (hibernation), we need to re-initialize this
      again manually, because it's out of regcache restoration.
      
      This patch addresses the issue by introducing alc_pre_init() function
      that performs such a task.  This is called from each codec probe
      function, and it's called from the resume callback conditionally only
      from S4 resume.
      Reported-and-tested-by: default avatarKailang Yang <kailang@realtek.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      c9af753f
    • Kailang Yang's avatar
      ALSA: hda/realtek - Fixup headphone noise via runtime suspend · dad3197d
      Kailang Yang authored
      Dell platform with ALC298.
      system enter to runtime suspend. Headphone had noise.
      Let Headset Mic not shutup will solve this issue.
      
      [ Fixed minor coding style issues by tiwai ]
      Signed-off-by: default avatarKailang Yang <kailang@realtek.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      dad3197d
  4. 09 May, 2019 2 commits
  5. 08 May, 2019 13 commits
  6. 07 May, 2019 6 commits
  7. 06 May, 2019 13 commits
    • Olivier Moysan's avatar
      ASoC: stm32: spdifrx: change trace level on iec control · 19e42536
      Olivier Moysan authored
      Change trace level to debug to avoid spurious messages.
      Return quietly when accessing iec958 control, while no
      S/PDIF signal is available.
      Signed-off-by: default avatarOlivier Moysan <olivier.moysan@st.com>
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      19e42536
    • Olivier Moysan's avatar
      ASoC: stm32: spdifrx: update pcm hardware constraints · 863137f0
      Olivier Moysan authored
      - Set period minimum size. Ensure at least 5ms period
      up to 48kHz/16 bits to prevent underrun/overrun.
      - Remove MDMA constraints on period maximum size and
      set period maximum to half the buffer maximum size.
      Signed-off-by: default avatarOlivier Moysan <olivier.moysan@st.com>
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      863137f0
    • Jon Hunter's avatar
      ASoC: max98090: Fix restore of DAPM Muxes · ecb2795c
      Jon Hunter authored
      The max98090 driver defines 3 DAPM muxes; one for the right line output
      (LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux)
      and one for the right headphone mixer source (MIXHPRSEL Mux). The same
      bit is used for the mux as well as the DAPM enable, and although the mux
      can be correctly configured, after playback has completed, the mux will
      be reset during the disable phase. This is preventing the state of these
      muxes from being saved and restored correctly on system reboot. Fix this
      by marking these muxes as SND_SOC_NOPM.
      
      Note this has been verified this on the Tegra124 Nyan Big which features
      the MAX98090 codec.
      Signed-off-by: default avatarJon Hunter <jonathanh@nvidia.com>
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      Cc: stable@vger.kernel.org
      ecb2795c
    • Curtis Malainey's avatar
      ASoC: RT5677-SPI: Disable 16Bit SPI Transfers · a46eb523
      Curtis Malainey authored
      The current algorithm allows 3 types of transfers, 16bit, 32bit and
      burst. According to Realtek, 16bit transfers have a special restriction
      in that it is restricted to the memory region of
      0x18020000 ~ 0x18021000. This region is the memory location of the I2C
      registers. The current algorithm does not uphold this restriction and
      therefore fails to complete writes.
      
      Since this has been broken for some time it likely no one is using it.
      Better to simply disable the 16 bit writes. This will allow users to
      properly load firmware over SPI without data corruption.
      Signed-off-by: default avatarCurtis Malainey <cujomalainey@chromium.org>
      Reviewed-by: default avatarBen Zhang <benzh@chromium.org>
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      Cc: stable@vger.kernel.org
      a46eb523
    • Hui Wang's avatar
      ALSA: hda/hdmi - Consider eld_valid when reporting jack event · 7f641e26
      Hui Wang authored
      On the machines with AMD GPU or Nvidia GPU, we often meet this issue:
      after s3, there are 4 HDMI/DP audio devices in the gnome-sound-setting
      even there is no any monitors plugged.
      
      When this problem happens, we check the /proc/asound/cardX/eld#N.M, we
      will find the monitor_present=1, eld_valid=0.
      
      The root cause is BIOS or GPU driver makes the PRESENCE valid even no
      monitor plugged, and of course the driver will not get the valid
      eld_data subsequently.
      
      In this situation, we should not report the jack_plugged event, to do
      so, let us change the function hdmi_present_sense_via_verbs(). In this
      function, it reads the pin_sense via snd_hda_pin_sense(), after
      calling this function, the jack_dirty is 0, and before exiting
      via_verbs(), we change the shadow pin_sense according to both
      monitor_present and eld_valid, then in the snd_hda_jack_report_sync(),
      since the jack_dirty is still 0, it will report jack event according
      to this modified shadow pin_sense.
      
      After this change, the driver will not report Jack_is_plugged event
      through hdmi_present_sense_via_verbs() if monitor_present is 1 and
      eld_valid is 0.
      Signed-off-by: default avatarHui Wang <hui.wang@canonical.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      7f641e26
    • Hui Wang's avatar
      ALSA: hda/hdmi - Read the pin sense from register when repolling · 8c2e6728
      Hui Wang authored
      The driver will check the monitor presence when resuming from suspend,
      starting poll or interrupt triggers. In these 3 situations, the
      jack_dirty will be set to 1 first, then the hda_jack.c reads the
      pin_sense from register, after reading the register, the jack_dirty
      will be set to 0. But hdmi_repoll_work() is enabled in these 3
      situations, It will read the pin_sense a couple of times subsequently,
      since the jack_dirty is 0 now, It does not read the register anymore,
      instead it uses the shadow pin_sense which is read at the first time.
      
      It is meaningless to check the shadow pin_sense a couple of times,
      we need to read the register to check the real plugging state, so
      we set the jack_dirty to 1 in the hdmi_repoll_work().
      Signed-off-by: default avatarHui Wang <hui.wang@canonical.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      8c2e6728
    • Takashi Iwai's avatar
      Merge tag 'asoc-v5.2' of... · d8164551
      Takashi Iwai authored
      Merge tag 'asoc-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
      
      ASoC: Updates for v5.2
      
      This is a pretty huge set of changes, it's been a pretty active release
      all round but the big thing with this release is the Sound Open Firmware
      changes from Intel, providing another DSP framework for use with the
      DSPs in their SoCs.  This one works with the firmware of the same name
      which is free software (unlike the previous DSP firmwares and framework)
      and there has been some interest in adoption by other systems already so
      hopefully we will see adoption by other vendors in the future.
      
      Other highlights include:
      
       - Support for MCLK/sample rate ratio setting in the generic cards.
       - Support for pin switches in the generic cards.
       - A big set of improvements to the TLV320AIC32x4 drivers from Annaliese
         McDermond.
       - New drivers for Freescale audio mixers, several Intel machines,
         several Mediatek machines, Meson G12A, Sound Open Firmware and
         Spreadtrum compressed audio and DMA devices.
      d8164551
    • Mark Brown's avatar
      Merge branch 'asoc-5.2' into asoc-next · 378d590c
      Mark Brown authored
      378d590c
    • Mark Brown's avatar
      Merge branch 'asoc-5.1' into asoc-linus · 7f5a466f
      Mark Brown authored
      7f5a466f
    • Baolin Wang's avatar
      ASoC: sprd: Add reserved DMA memory support · 1587a061
      Baolin Wang authored
      For Spreadtrum audio platform driver, it need allocate a larger DMA buffer
      dynamically to copy audio data between userspace and kernel space, but that
      will increase the risk of memory allocation failure especially the system
      is under heavy load situation.
      
      To make sure the audio can work in this scenario, we usually reserve one
      region of memory to be used as a shared pool of DMA buffers for the
      platform component. So add of_reserved_mem_device_init_by_idx() function
      to initialize the shared pool of DMA buffers to be used by the platform
      component.
      Signed-off-by: default avatarBaolin Wang <baolin.wang@linaro.org>
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      1587a061
    • Dan Carpenter's avatar
      ALSA: synth: emux: soundfont.c: divide by zero in calc_gus_envelope_time() · 2854cd34
      Dan Carpenter authored
      This function is called from load_guspatch() and the rate is specified
      by the user.  If they accidentally selected zero then it would crash the
      kernel.  I've just changed the zero to a one.
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      2854cd34
    • Takashi Iwai's avatar
      Merge branch 'for-linus' into for-next · 17b89c80
      Takashi Iwai authored
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      17b89c80
    • Linus Torvalds's avatar
      Linux 5.1 · e93c9c99
      Linus Torvalds authored
      e93c9c99
  8. 05 May, 2019 1 commit
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 7178fb0b
      Linus Torvalds authored
      Pull perf fixes from Ingo Molnar:
       "I'd like to apologize for this very late pull request: I was dithering
        through the week whether to send the fixes, and then yesterday Jiri's
        crash fix for a regression introduced in this cycle clearly marked
        perf/urgent as 'must merge now'.
      
        Most of the commits are tooling fixes, plus there's three kernel fixes
        via four commits:
      
          - race fix in the Intel PEBS code
      
          - fix an AUX bug and roll back a previous attempt
      
          - fix AMD family 17h generic HW cache-event perf counters
      
        The largest diffstat contribution comes from the AMD fix - a new event
        table is introduced, which is a fairly low risk change but has a large
        linecount"
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        perf/x86/intel: Fix race in intel_pmu_disable_event()
        perf/x86/intel/pt: Remove software double buffering PMU capability
        perf/ring_buffer: Fix AUX software double buffering
        perf tools: Remove needless asm/unistd.h include fixing build in some places
        tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv
        tools build: Add -ldl to the disassembler-four-args feature test
        perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet
        perf cs-etm: Don't check cs_etm_queue::prev_packet validity
        perf report: Report OOM in status line in the GTK UI
        perf bench numa: Add define for RUSAGE_THREAD if not present
        tools lib traceevent: Change tag string for error
        perf annotate: Fix build on 32 bit for BPF annotation
        tools uapi x86: Sync vmx.h with the kernel
        perf bpf: Return value with unlocking in perf_env__find_btf()
        MAINTAINERS: Include vendor specific files under arch/*/events/*
        perf/x86/amd: Update generic hardware cache events for Family 17h
      7178fb0b