- 26 Mar, 2020 3 commits
-
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/late Qualcomm ARM64 DT updates for v5.7 This brings initial support for the SM8250 and IPQ6018 platforms. SDM845 gets audio, PCIe and IP-accelerator support, and the interconnect providers are refactored. The Lenovo Yoga C630 has audio enabled and the DB845c has PCIe, analog audio and low-speed interfaces enabled. The SDM845 MTP has its display enabled and firmware location updated to match linux-firmware. SC7180 gains CPU topology and power properties. Interconnect providers, eMMC, SD-card, multimedia clocks, display, Bluetooth, Venus are added. Critical trip points are added as well as various fixes. For MSM8916 FastRPC support is added, ETM power management and reserved memory for Samsung A2015 are corrected. MSM8996 switches to generic QMP phy driver for its UFS support. MSM8998 temporarily disables part of Coresight to boot without clk_ignore_unused. CEQ for eMMC on QCS404 is enabled. Fixes throughout the platforms to fix binding compliance, correct compatibles for SDHCI nodes and add gpio-ranges. * tag 'qcom-arm64-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (56 commits) arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware arm64: dts: sdm845: add IPA information arm64: dts: qcom: db845c: add analog audio support arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s arm64: dts: qcom: c630: Enable audio support arm64: dts: qcom: sdm845: add apr nodes arm64: dts: qcom: sdm845: add slimbus nodes arm64: dts: qcom: sc7180: Update reg names for SDHC arm64: dts: qcom: qcs404: Enable CQE support for eMMC arm64: dts: msm8916: Add fastrpc node arm64: dts: qcom: sm8250: Add sm8250 dts file arm64: dts: qcom: msm8998-mtp: Disable funnel 4 and 5 arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes arm64: dts: qcom: apq8016-sbc: Remove wrong regulator supply arm64: dts: qcom: sc7180: Added critical trip point Thermal-zones node arm64: dts: qcom: msm8998: Fix cpu compatible arm64: dts: qcom: sc7180: Add OSM L3 interconnect provider arm64: dts: qcom: sdm845: Add OSM L3 interconnect provider arm64: dts: sc7180: Add interconnect provider DT nodes arm64: dts: qcom: msm8996: Use generic QMP driver for UFS ... Link: https://lore.kernel.org/r/20200318043823.GA470201@yogaSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.7/ti-sysc-drop-pdata-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late Drop remaining legacy platform data for cpsw and edma With a non-critical clock fix for dm814x ethernet, we can update ti81xx for cpsw ethernet and edma to probe them with ti-sysc interconnect target module driver and device tree data. And we can drop the related remaining platform data for cpsw and edma. * tag 'omap-for-v5.7/ti-sysc-drop-pdata-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Drop legacy platform data for ti81xx edma ARM: dts: Configure interconnect target module for ti816x edma ARM: dts: Configure interconnect target module for dm814x tptc3 ARM: dts: Configure interconnect target module for dm814x tptc2 ARM: dts: Configure interconnect target module for dm814x tptc1 ARM: dts: Configure interconnect target module for dm814x tptc0 ARM: dts: Configure interconnect target module for dm814x tpcc ARM: OMAP2+: Drop legacy platform data for dm814x cpsw ARM: dts: Configure interconnect target module for dm814x cpsw clk: ti: Fix dm814x clkctrl for ethernet Link: https://lore.kernel.org/r/pull-1584575307-189595@atomide.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.7/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late Drop legacy platform data for omaps for v5.7 This series of changes continues dropping legacy platform data for omaps by updating devices to probe with ti-sysc interconnect target module driver: - Update omap4, omap5, am437x, and dra7 display subsystem (DSS) to probe with device tree data only - Update am335x, am437x and dra7 to probe EDMA to probe with device tree data only - Drop legacy platform data for am335x and am437x PRUSS as the current code just keeps the devices in reset - Drop legacy platform data for omap4 DSP and IPU as the current code just keeps the devices in reset - Configure am437x and dra7 PRU-ICSS to probe with device tree data For the dropped omap4 DSP and IPU platform data, there will be patches coming later on to configure the accelerators using the omap remoteproc bindings so hopefully folks can actually use these devices eventually. * tag 'omap-for-v5.7/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (56 commits) ARM: OMAP2+: Drop legacy platform data for dra7 edma ARM: OMAP2+: Drop legacy platform data for am3 and am4 edma ARM: dts: Configure interconnect target module for dra7 tptc1 ARM: dts: Configure interconnect target module for dra7 tptc0 ARM: dts: Configure interconnect target module for dra7 tpcc ARM: dts: Configure interconnect target module for am4 tptc2 ARM: dts: Configure interconnect target module for am4 tptc1 ARM: dts: Configure interconnect target module for am4 tptc0 ARM: dts: Configure interconnect target module for am4 tpcc ARM: dts: Configure interconnect target module for am3 tptc2 ARM: dts: Configure interconnect target module for am3 tptc1 ARM: dts: Configure interconnect target module for am3 tptc0 ARM: dts: Configure interconnect target module for am3 tpcc ARM: dts: dra7: Add PRU-ICSS interconnect target-module nodes ARM: dts: AM4372: Add the PRU-ICSS interconnect target-module node ARM: dts: AM33xx-l4: Update PRUSS interconnect target-module node ARM: OMAP2+: Drop legacy platform data for am437x DSS ARM: OMAP2+: Drop legacy platform data for dra7 DSS ARM: OMAP2+: Drop legacy platform data for omap5 DSS ARM: OMAP2+: Drop legacy platform data for omap4 dss ... Link: https://lore.kernel.org/r/pull-1583858385-416921@atomide.comSigned-off-by:
-
- 17 Mar, 2020 13 commits
-
-
Tony Lindgren authored
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure edma for dm816x similar to what we have for dm814x. Let's initially keep the legacy "ti,hwmods" peroperty, it will be removed for all ti81xx in a later patch. Note that as we now also start using the clkctrl clock binding on dm816x, the board specific dts files must also have compatible "ti,dm816". This is needed for the clkctrl clocks to probe properly, so any out of tree dts files may need to be updated accordingly. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data. dts property. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module and drop the legacy "ti,hwmods" property. As this module is very similar to what we already have configured and working for am33xx, let's just update the whole cpsw with a single patch to avoid some extra churn on the dts files. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: -
Tony Lindgren authored
Drop legacy platform data for omaps for v5.7 This series of changes continues dropping legacy platform data for omaps by updating devices to probe with ti-sysc interconnect target module driver: - Update omap4, omap5, am437x, and dra7 display subsystem (DSS) to probe with device tree data only - Update am335x, am437x and dra7 to probe EDMA to probe with device tree data only - Drop legacy platform data for am335x and am437x PRUSS as the current code just keeps the devices in reset - Drop legacy platform data for omap4 DSP and IPU as the current code just keeps the devices in reset - Configure am437x and dra7 PRU-ICSS to probe with device tree data For the dropped omap4 DSP and IPU platform data, there will be patches coming later on to configure the accelerators using the omap remoteproc bindings so hopefully folks can actually use these devices eventually.
-
Tony Lindgren authored
We are missing alwon ethernet clock for dm814x and this prevents us from probing the CPSW with device tree only data. Looks like Ethernet currently only works if it has been enabled in the bootloader. Looks like relying on the bootloader clocks is not an issue with the mainline kernel currently, but it will be an issue when configuring CPSW Ethernet to probe with device tree data only as we will be managing the clocks. Fixes: 26ca2e97 ("clk: ti: dm814: add clkctrl clock data") Cc: linux-clk@vger.kernel.org Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Bjorn Andersson authored
Update the firmware-name of the remoteproc nodes to mimic the firmware structure on other 845 devices. Reviewed-by:
Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200302020757.551483-1-bjorn.andersson@linaro.orgSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org>
-
Alex Elder authored
Add IPA-related nodes and definitions to "sdm845.dtsi". Signed-off-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20200313115237.10491-2-elder@linaro.org [bjorn: Moved modem-init to cheza.dtsi] Signed-off-by:
-
- 15 Mar, 2020 5 commits
-
-
Srinivas Kandagatla authored
This patch adds support to Analog audio via WSA881x speakers. Reviewed-by:
Vinod Koul <vkoul@kernel.org> Tested-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200312143024.11059-6-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
Add pinctrl nodes required for QUAT I2S Reviewed-by:
-
Srinivas Kandagatla authored
This patch add support to audio via WSA881x Speakers and Headset. Reviewed-by:
-
Srinivas Kandagatla authored
Reviewed-by:
-
Srinivas Kandagatla authored
Reviewed-by:
-
- 12 Mar, 2020 3 commits
-
-
Veerabhadrarao Badiganti authored
Remove the redundant _mem suffix for SDHC reg names. For SDcard instance, no need supply reg names since hc reg map is accessed with index. So remove reg names for SDcard. Signed-off-by:
Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1583946863-24308-2-git-send-email-vbadigan@codeaurora.orgSigned-off-by:
-
Veerabhadrarao Badiganti authored
Enabling CQE support for eMMC by supplying the correct reg name and flag which indicates CQE support. Also remove the redundant _mem suffix for reg names. Signed-off-by:
-
Srinivas Kandagatla authored
Add fastrpc device node for adsp with one compute bank. Tested-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
- 10 Mar, 2020 1 commit
-
-
Venkata Narendra Kumar Gutta authored
Add sm8250 devicetree file for SM8250 SoC and SM8250 MTP platform. This file adds the basic nodes like cpu, psci and other required configuration for booting up to the serial console. Signed-off-by:
Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Signed-off-by:
-
- 09 Mar, 2020 1 commit
-
-
Bjorn Andersson authored
Disable Coresight funnel 4 and 5, for now, as these causes the MTP to crash when clock late_initcall disables unused clocks. Reviewed-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by:
-
- 07 Mar, 2020 2 commits
-
-
Srinivas Kandagatla authored
This patch adds support UART0, I2C0, I2C1 and SPI0 available on Low Speed expansion connector. Signed-off-by:
-
Loic Poulain authored
As specified in the smd-rpm-regulator binding and confirmed by the pm8616 device specification, there is no vdd_l5. l5 vdd comes from vdd_l4_l5_l6. Fix that (though it does not cause any issue since the supply is not requested). Signed-off-by:
-
- 06 Mar, 2020 12 commits
-
-
Tony Lindgren authored
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: -
Tony Lindgren authored
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
