For some m68k configs, I get:

| net/rfkill/rfkill-input.c: In function 'rfkill_start':
| net/rfkill/rfkill-input.c:208: error: dereferencing pointer to incomplete type

As the incomplete type is `struct task_struct', including <linux/sched.h> fixes
it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ERROR: "nvram_read_byte" [drivers/scsi/atari_scsi.ko] undefined!
ERROR: "nvram_check_checksum" [drivers/scsi/atari_scsi.ko] undefined!
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If CONFIG_PROC_FS is not set, I get:

| arch/m68k/kernel/ints.c:433: error: redefinition of 'init_irq_proc'
| include/linux/interrupt.h:438: error: previous definition of 'init_irq_proc' was here

This was introduced by commit 6168a702
("Declare init_irq_proc before we use it."), which replaced the #ifdef
protection of the init_irq_proc() call by a static inline dummy if
CONFIG_PROC_FS is not set.

Make init_irq_proc() depend on CONFIG_PROC_FS to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch removes the no longer used m68k PCI code.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch removes the Hades support that was marked as BROKEN 5 years ago.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Kill compiler warnings related to printf() formats in the input drivers for
various HP9000 machines, which are shared between PA-RISC (suseconds_t is int)
and m68k (suseconds_t is long). As both are 32-bit, it's safe to cast to int.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Several multi-bus subsystems:

| include/linux/ssb/ssb.h: In function 'ssb_dma_mapping_error':
| include/linux/ssb/ssb.h:430: error: implicit declaration of function 'pci_dma_mapping_error'
| include/linux/ssb/ssb.h: In function 'ssb_dma_map_single':
| include/linux/ssb/ssb.h:444: error: implicit declaration of function 'pci_map_single'
| include/linux/ssb/ssb.h: In function 'ssb_dma_unmap_single':
| include/linux/ssb/ssb.h:458: error: implicit declaration of function 'pci_unmap_single'
| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_for_cpu':
| include/linux/ssb/ssb.h:475: error: implicit declaration of function 'pci_dma_sync_single_for_cpu'
| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_for_device':
| include/linux/ssb/ssb.h:493: error: implicit declaration of function 'pci_dma_sync_single_for_device'

or legacy drivers:

| drivers/net/hp100.c: In function 'pdl_map_data':
| drivers/net/hp100.c:291: error: implicit declaration of function 'pci_map_single'
| drivers/net/hp100.c: In function 'hp100_probe1':
| drivers/net/hp100.c:707: error: implicit declaration of function 'pci_alloc_consistent'
| drivers/net/hp100.c:782: error: implicit declaration of function 'pci_free_consistent'
| drivers/net/hp100.c: In function 'hp100_clean_txring':
| drivers/net/hp100.c:1614: error: implicit declaration of function 'pci_unmap_single'

and

| drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_allocate_scb':
| drivers/scsi/aic7xxx_old.c:2573: error: implicit declaration of function 'pci_alloc_consistent'
| drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_done':
| drivers/scsi/aic7xxx_old.c:2697: error: implicit declaration of function 'pci_unmap_single'
| drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_handle_seqint':
| drivers/scsi/aic7xxx_old.c:4275: error: implicit declaration of function 'pci_map_single'
| drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_free':
| drivers/scsi/aic7xxx_old.c:8460: error: implicit declaration of function 'pci_free_consistent'

rely on PCI DMA operations to be always available.

Add #include <asm-generic/pci-dma-compat.h> to <asm/pci.h> to make them happy.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_cpu':
| include/linux/ssb/ssb.h:517: error: implicit declaration of function 'dma_sync_single_range_for_cpu'
| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_device':
| include/linux/ssb/ssb.h:538: error: implicit declaration of function 'dma_sync_single_range_for_device'

Add the missing dma_sync_single_range_for_{cpu,device}(), and remove the
`inline' for the non-static function dma_sync_single_for_device().
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The nvram and rtc-cmos drivers use the spinlock rtc_lock to protect against
concurrent accesses to the CMOS memory. As m68k doesn't support SMP or preempt
yet, the spinlock calls tend to get optimized away, but not for all
configurations, causing in some rare cases:

| ERROR: "rtc_lock" [drivers/rtc/rtc-cmos.ko] undefined!
| ERROR: "rtc_lock" [drivers/char/nvram.ko] undefined!

Add the spinlock to the Atari core code to avoid this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If CONFIG_VT=n, I get:

| arch/m68k/atari/built-in.o: In function `atari_kbd_translate':
| arch/m68k/atari/atakeyb.c:640: undefined reference to `shift_state'

Just remove atari_kbd_translate(), as it's unused.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

| ERROR: "key_maps" [drivers/input/keyboard/amikbd.ko] undefined!

Export key_maps in the Amiga core code, as its defined in an autogenerated
file (drivers/char/defkeymap.c)
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently Sun 3 support is the first platform option, as the Sun 3 MMU is
incompatible with standard Motorola MMUs. However, this means that
`allmodconfig' enables support for Sun 3, and thus disables support for all
other platforms.

Reverse the logic and move Sun 3 last, so `allmodconfig' enables all
platforms except for Sun 3, increasing compile-coverage.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add .note.gnu.build-id to init data so it's discarded at boot.

[Andreas Schwab] Use NOTES macro
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Put .bss at the end of the data section
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This changes the oops and backtrace code to use the new `%pS' printk()
extension to print out symbols rather than manually calling print_symbol.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch changes m68k to use the new bcd2bin/bin2bcd functions instead
of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.

It also remove local bcd2bin/bin2bcd implementations
in favor of the global ones.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Splitting the 8250 code back up to avoid a clash with the NR_IRQS removal
patch introduced a last minute bug. Put back the additional needed lines
for the old lock init
Signed-off-by: Alan Cox <alan@redhat.com>
[ Ingo also reports that this can cause a spontaneous reboot crash with
  certain configs, and sends in an identical patch ]
Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (66 commits)
  ata: Add documentation for hard disk shock protection interface (v3)
  ide: Implement disk shock protection support (v4)
  ide-cd: fix printk format warning
  piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list
  ide-atapi: assign taskfile flags per device type
  ide-cd: move cdrom_info.dma to ide_drive_t.dma
  ide: add ide_drive_t.dma flag
  ide-cd: add a debug_mask module parameter
  ide-cd: convert driver to new ide debugging macro (v3)
  ide: move SFF DMA code to ide-dma-sff.c
  ide: cleanup ide-dma.c
  ide: cleanup ide_build_dmatable()
  ide: remove needless includes from ide-dma.c
  ide: switch to DMA-mapping API part #2
  ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
  ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
  ide: __ide_dma_end() -> ide_dma_end()
  pmac: remove needless pmac_ide_destroy_dmatable() wrapper
  pmac: remove superfluous pmif == NULL checks
  ide: Two fixes regarding memory allocation
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits)
  pcmcia: ioctl-internal definitions
  pcmcia: cistpl header cleanup
  pcmcia: remove unused argument to pcmcia_parse_tuple()
  pcmcia: card services header cleanup
  pcmcia: device_id header cleanup
  pcmcia: encapsulate ioaddr_t
  pcmcia: cleanup device driver header file
  pcmcia: cleanup socket services header file
  pcmcia: merge ds_internal.h into cs_internal.h
  pcmcia: cleanup cs_internal.h
  pcmcia: cs_internal.h is internal
  pcmcia: use dev_printk for cs_error()
  pcmcia: remove CS_ error codes alltogether
  pcmcia: deprecate CS_BAD_TUPLE
  pcmcia: deprecate CS_BAD_ARGS
  pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE
  pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE
  pcmcia: deprecate CS_NO_MORE_ITEMS
  pcmcia: deprecate CS_IN_USE
  pcmcia: deprecate CS_CONFIGURATION_LOCKED
  ...

Fix trivial conflict in drivers/pcmcia/ds.c manually

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (313 commits)
  V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards
  V4L/DVB (9185): S2API: Ensure we have a reasonable ROLLOFF default
  V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by default.
  V4L/DVB (9183): S2API: Return error of the caller provides 0 commands.
  V4L/DVB (9182): S2API: Added support for DTV_HIERARCHY
  V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and DTV_TRANSMISSION_MODE
  V4L/DVB (9180): S2API: Added support for DTV_CODE_RATE_HP/LP
  V4L/DVB (9179): S2API: frontend.h cleanup
  V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO.
  V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16
  V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator.
  V4L/DVB (9175): Remove NULL pointer in stb6000 driver.
  V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator.
  V4L/DVB (9173): S2API: Remove the hardcoded command limit during validation
  V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the legacy API.
  V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API.
  V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the cx24116 demod.
  V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams.
  V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote
  V4L/DVB: v4l2-dev: remove duplicated #include
  ...

Put some information (and pointers to more) into the kernel's doc tree,
describing briefly the interface to the kernel's disk head unloading
facility. Information about how to set up a complete shock protection
system under GNU/Linux can be found on the web and is referenced
accordingly.

v3:
Here is some final polish including various spelling corrections
pointed out by Grant Grundler and Peter Moulder. Also, I have added some
information about the timing constraints related to disk head parking.
The patch looks more impressive than it really is and I think it would
be alright just to incorporate it into the original patch so as not to
clutter up the git log.
Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD
FEATURE as specified in ATA-7 is issued to the device and processing of
the request queue is stopped thereafter until the specified timeout
expires or user space asks to resume normal operation. This is supposed
to prevent the heads of a hard drive from accidentally crashing onto the
platter when a heavy shock is anticipated (like a falling laptop expected
to hit the floor). Port resets are deferred whenever a device on that
port is in the parked state.

v3:
Elias Oltmanns <eo@nebensachen.de> wrote:
[...]
> >> 1. Make sure that no negative value is being passed to
> >>    jiffies_to_msecs() in ide_park_show().
> >> 2. Drop the superfluous variable hwif in ide_special_rq().
> >> 3. Skip initialisation of task and tf in ide_special_rq() if we are not
> >>    handling a (un)park request.
> >
> > Well, #3 should have been done differently because we donn't want to
> > check for REQ_(UN)?PARK_HEADS more often than is necessary.
> 
> While preparing the backport to 2.6.27, it has just occurred to me that
> we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset()
> because this flag must not be set after *any* sort of access to the
> device.

v4:
Fix a memory leak due to a missing blk_put_request() in
issue_park_cmd(). Additionally, we should plug the queue when enqueueing
the unpark request because there is no guarantee that the park timeout
has not expired by then. Even though the chance for that to happen is
very slim, the request might end up hanging in the queue until the next
I/O operation is queued up. While at it, clean up the code a little:
- make issue_park_cmd() a function of type void since nobody cares for
  the return value anyway;
- use blk_start_queueing() instead of __blk_run_queue() since we don't
  have to worry about recursion;
- remove a superfluous pointer deference in task_no_data_intr().
Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Cc: Jeff Garzik <jeff@garzik.org>,
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This flag is to accomodate ide-cd functionality into ide atapi.

There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
[bart: no need to zero debug_mask + move it next to module_param()]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Also,

- leave in the possibility for optimizing away all debugging macros
- add a PFX macro and prepend all printk calls with it for consistency
- add debug macro calls in important driver paths
- remove #if 0-ed code
- mv restore_request -> ide_cd_restore_request
- add a driver registration printk

v2:
failed_command can be NULL so check it before accessing it

v3:
fix another NULL ptr in debug statement

There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- s/HWIF(drive)/drive->hwif/
- s/HWGROUP(drive)/[drive->]hwif->hwgroup/
- fixup error messages in ide_dma_intr() & dma_timer_expiry()
- fix checkpatch.pl errors/warnings
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- use for_each_sg()
- move printing 'DMA table too small' message below use_pio_instead label
- merge '64KB bug' comment with function documentation
- fix intendation

There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Follow-up to commit 5c05ff68
("ide: switch to DMA-mapping API"):

* pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent()
  in ide_{allocate,release}_dma_engine().

* Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t
  (+ set default values in ide_allocate_dma_engine()).

* Make ide_{allocate,release}_dma_engine() available also
  for CONFIG_BLK_DEV_IDEDMA_SFF=n.  Then convert au1xxx-ide.c,
  scc_pata.c and sgiioc4.c to use them.

* Add missing ->init_dma method to scc_pata.

This patch also fixes:
- ->dmatable_cpu leak for au1xxx-ide
- too early realease of ->dmatable_cpu for scc_pata
- wrong amount of ->dmatable_cpu memory being freed for sgiioc4

While at it:
- remove superfluous ->dma_base check from ide_unregister()
- return -ENOMEM on error in ide_release_dma_engine()
- beautify error message in ide_release_dma_engine()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
and convert {ics,au1xxx-}ide.c to use it.

While at it:
- dump ATA Status register content on error
- use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
and convert {ics,au1xxx-}ide.c to use it.

While at it:
- use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

While at it:
- use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

hwif->sg_nents is always != 0 when this function is called
and there is also no need to explicitely zero hwif->sg_nents.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

In function ide_devset_execute() we should use __GFP_WAIT rather than
GFP_KERNEL. Also, the allocation cannot possibly fail at that point.
More importantly, there is a potential memory leak in the device probing
code. The infrastructure seems rather complex and I hope I haven't messed
anything up by trying to fix this.
Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
[bart: remove superfluous ide_lock taking]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>