Now that we don't have automatic syntax highlighting, use the code-block
directive with the explicitly selected language, where appropriate.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Now that we don't have automatic syntax highlighting, use the code-block
directive with the explicitly selected language, where appropriate.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Set the default highlight language to "none", i.e. do not try to guess
the language and do automatic syntax highlighting on literal blocks.

Eyeballing around the generated documentation, we don't seem to actually
have a lot of literal blocks that would benefit from syntax
highlighting. The C code blocks we do have are typically very short, and
most of the literal blocks are things that shouldn't be highlighted (or,
do not have a pygments lexer). This seems to be true for literal blocks
both in the rst source files and in source code comments.

Not highlighting code is never wrong, but guessing the language wrong
almost invariably leads to silly or confusing highlighting.

At the time of writing, admin-guide/oops-tracing.rst and
admin-guide/ramoops.rst contain good examples of 1) a small C code
snippet not highlighted, 2) a hex dump highligted as who knows what, 3)
device tree block highlighted as C or maybe Python, 4) a terminal
interaction highlighted as code in some language, and finally, 5) some C
code snippets correctly identified as C. I think we're better off
disabling language guessing, and going by explicitly identified
languages for longer code blocks.

It is still possible to enable highlighting on an rst source file basis
using the highlight directive:

.. higlight:: language

and on a literal block basis using the code-block directive:

.. code-block:: language

See http://www.sphinx-doc.org/en/latest/markup/code.html for details.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Fix the warning:

WARNING: "latex_documents" config value references unknown document
user/index
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Add missing semicolon to fix pdf build with more than one SPHINXDIRS
directory specified. For example make SPHINXDIRS="gpu media" pdfdocs.

Fixes: cd21379b ("doc-rst: generic way to build PDF of sub-folders")
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Radically reduce the noise on stdout. The full build logs will still be
available under Documentatio/output/latex/*.log.

Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Tested-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

With the unnecessary ; removed, the terminal URL detection also works
better.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Building latexdocs doesn't actually require $(PDFLATEX). Move the checks
for it to the pdfdocs target which does require it, and specifically
outside of the target in order to not depend on latexdocs when we can't
build pdfdocs anyway.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Tested-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Refer to xelatex and latex options via variables. This allows the user
to override the pdflatex and latex options to use on the make command
line for experimenting. As a side effect, this makes the makefile a bit
tidier.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

The creation of the admin and process guides is a great thing, but, without
care, we risk replacing a messy docs directory with a few messy Sphinx
books.  In an attempt to head that off and show what I'm thinking, here's a
set of tweaks that, I think, make the existing Sphinx-formatted docs a bit
more accessible.

It does no good to mention The 2.4 kernel series and neglect
USB 3.x and XHCI. Also with type C and micro/mini USB we better
not talk about the shape of connectors.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This is ancient stuff and we don't do things this way anymore.  In the
absence of simply deleting the document, at least add a warning to it.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This is crufty stuff and should maybe just be deleted, but I'm not quite
ready to do that yet.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

I believe this makes the page as a whole more approachable.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The main goal here was to get the subsections to show in the TOC as they do
for all the other documents.  Also call out the DCO in the section title
since it's important.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Put like documents together, with the essential ones at the top, and split
the TOC into sections.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The document has not been touched in over 11 years and doesn't reflect how
profiling is done in the perf era.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The last release of this tool was for 2.6.28; it's hard to see how it has
any relevance to current kernels.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The admin guide is a good start, but it's time to turn it into something
better than an unordered blob of files.  This is a first step in that
direction.  The TOC has been split up and annotated, the guides have been
reordered, and minor tweaks have been applied to a few of them.

One consequence of splitting up the TOC is that we don't really want to use
:numbered: anymore, since the count resets every time and there doesn't
seem to be a way to change that.  Eventually we probably want to group the
documents into sub-books, at which point we can go back to a single TOC,
but it's probably early to do that.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Let's make the title of this document (which shows up in the top page)
better describe its contents.

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This will be the initial landing point for readers, so give them a bit of
introductory material.  Also split the TOC into area-specific chunks to
make the whole thing a bit more approachable.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This allows to build PDF of only the sub-projects, which reduce the
roundtrip compared to build the PDF from the main documentation.
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The index should only be included if the build of the sub-folder is done
with the html-builder (HTML output).
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Add minimal conf.py makes the driver-api folder buildable
stand-alone. To build only this folder run::

  make SPHINXDIRS=driver-api htmldocs
  make SPHINXDIRS=driver-api pdfdocs
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Add minimal conf.py and moved dev-tools/tools.rst to dev-tools/index.rst
makes the dev-tools folder buildable stand-alone. To build only this
folder run::

  make SPHINXDIRS=dev-tools htmldocs
  make SPHINXDIRS=dev-tools pdfdocs
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Merge Mauro's massive patch series creating the process and admin-guide
books.  I think there's a lot of stuff to clean up here, but there's no
point in holding things up for that.

Mauro sez:

This patch series continues the efforts of converting the Linux Kernel
documentation to Sphinx.

It contains text to ReST conversion of several files under Documentation,
and a few ones under the main dir (README, REPORTING-BUGS).

All patches on this series can be found on my development tree:
	https://git.linuxtv.org/mchehab/experimental.git/log/?h=lkml-books-v2

The Kernel docs html output after this series can be seen at:
	https://mchehab.fedorapeople.org/kernel_docs/

Fix some minor spelling errors and capitalization issues.
Signed-off-by: Igor Vuk <parcijala@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This commit applies upstream change, commit ebff09a6
("locking/Documentation: Clarify limited control-dependency scope"), to
Korean translation.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The dvb/ and video4linux/ dirs were removed, as now, all media
documentation is under media/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

As we moved the real README file to Documentation/admin-guide/README.rst,
let's add a replacement, pointing to it, and giving the main directions
about documentation.

In the future, perhaps it would be worth to move the contents
of Documentation/00-Index into this README.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Those files got moved to Documentation/process, but as they're very
well known files, add pointers to their new locations.

PS.: I opted to not merge this patch with the previous one
in order to make the diff of the previous one more consistent,
as it will show only renames.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The previous patch renamed several files that are cross-referenced
along the Kernel documentation. Adjust the links to point to
the right places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Place README, REPORTING-BUGS, SecurityBugs and kernel-parameters
on an user's manual book.

As we'll be numbering the user's manual, remove the manual
numbering from SecurityBugs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add several documents to the development-process ReST book.

As we don't want renames, use symlinks instead, keeping those
documents on their original place.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

As we'll type this a lot, after adding CodingStyle & friends,
let's rename the directory name to a shorter one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Adjust the readme file for it to use the ReST markup:

- add chapter/section markups;
- use ``foo`` for commands;
- use :: for verbatim and script blocks;
- replace unsupported markup _foo_ by **foo**;
- add cross-references to other ReST files;
- use lower case on the section titles, to match other ReST files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- add a title to the document;
- use :: before verbatim blocks;
- add blank lines where required;
- use protocol for URL references;
- use a verbatim block for the bugs template;
- add cross references to SecurityBugs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix ReST notation for a bullet item
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Sphinx doesn't like nested tables on the LaTex output.

So, change the table there to be displayed properly at
the PDF output.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- Fix document section markups;
- use quote blocks where needed;
- adjust spaces and blank lines;
- add it to the development-processs book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>