- 27 Feb, 2019 40 commits
-
-
Xin Long authored
[ Upstream commit af98c5a7 ] In sctp_stream_init(), after sctp_stream_outq_migrate() freed the surplus streams' ext, but sctp_stream_alloc_out() returns -ENOMEM, stream->outcnt will not be set to 'outcnt'. With the bigger value on stream->outcnt, when closing the assoc and freeing its streams, the ext of those surplus streams will be freed again since those stream exts were not set to NULL after freeing in sctp_stream_outq_migrate(). Then the invalid-free issue reported by syzbot would be triggered. We fix it by simply setting them to NULL after freeing. Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Reported-by: syzbot+58e480e7b28f2d890bfd@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit fc228abc ] Jianlin reported a panic when running sctp gso over gre over vlan device: [ 84.772930] RIP: 0010:do_csum+0x6d/0x170 [ 84.790605] Call Trace: [ 84.791054] csum_partial+0xd/0x20 [ 84.791657] gre_gso_segment+0x2c3/0x390 [ 84.792364] inet_gso_segment+0x161/0x3e0 [ 84.793071] skb_mac_gso_segment+0xb8/0x120 [ 84.793846] __skb_gso_segment+0x7e/0x180 [ 84.794581] validate_xmit_skb+0x141/0x2e0 [ 84.795297] __dev_queue_xmit+0x258/0x8f0 [ 84.795949] ? eth_header+0x26/0xc0 [ 84.796581] ip_finish_output2+0x196/0x430 [ 84.797295] ? skb_gso_validate_network_len+0x11/0x80 [ 84.798183] ? ip_finish_output+0x169/0x270 [ 84.798875] ip_output+0x6c/0xe0 [ 84.799413] ? ip_append_data.part.50+0xc0/0xc0 [ 84.800145] iptunnel_xmit+0x144/0x1c0 [ 84.800814] ip_tunnel_xmit+0x62d/0x930 [ip_tunnel] [ 84.801699] gre_tap_xmit+0xac/0xf0 [ip_gre] [ 84.802395] dev_hard_start_xmit+0xa5/0x210 [ 84.803086] sch_direct_xmit+0x14f/0x340 [ 84.803733] __dev_queue_xmit+0x799/0x8f0 [ 84.804472] ip_finish_output2+0x2e0/0x430 [ 84.805255] ? skb_gso_validate_network_len+0x11/0x80 [ 84.806154] ip_output+0x6c/0xe0 [ 84.806721] ? ip_append_data.part.50+0xc0/0xc0 [ 84.807516] sctp_packet_transmit+0x716/0xa10 [sctp] [ 84.808337] sctp_outq_flush+0xd7/0x880 [sctp] It was caused by SKB_GSO_CB(skb)->csum_start not set in sctp_gso_segment. sctp_gso_segment() calls skb_segment() with 'feature | NETIF_F_HW_CSUM', which causes SKB_GSO_CB(skb)->csum_start not to be set in skb_segment(). For TCP/UDP, when feature supports HW_CSUM, CHECKSUM_PARTIAL will be set and gso_reset_checksum will be called to set SKB_GSO_CB(skb)->csum_start. So SCTP should do the same as TCP/UDP, to call gso_reset_checksum() when computing checksum in sctp_gso_segment. Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
-
Russell King authored
[ Upstream commit b5bfc21a ] When we probe a SFP module, we expect to be able to call the upstream device's module_insert() function so that the upstream link can be configured. However, when the upstream device is delayed, we currently may end up probing the module before the upstream device is available, and lose the module_insert() call. Avoid this by holding off probing the module until the SFP bus is properly connected to both the SFP socket driver and the upstream driver. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Kal Conley authored
[ Upstream commit fc62814d ] When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Check it for overflow without limiting the total buffer size to UINT_MAX. This change fixes support for packet ring buffers >= UINT_MAX. Fixes: 8f8d28e4 ("net/packet: fix overflow in check for tp_frame_nr") Signed-off-by:
Kal Conley <kal.conley@dectris.com> Signed-off-by:
-
Tonghao Zhang authored
[ Upstream commit 218d05ce ] In some case, we may use multiple pedit actions to modify packets. The command shown as below: the last pedit action is effective. $ tc filter add dev netdev_rep parent ffff: protocol ip prio 1 \ flower skip_sw ip_proto icmp dst_ip 3.3.3.3 \ action pedit ex munge ip dst set 192.168.1.100 pipe \ action pedit ex munge eth src set 00:00:00:00:00:01 pipe \ action pedit ex munge eth dst set 00:00:00:00:00:02 pipe \ action csum ip pipe \ action tunnel_key set src_ip 1.1.1.100 dst_ip 1.1.1.200 dst_port 4789 id 100 \ action mirred egress redirect dev vxlan0 To fix it, we add max_mod_hdr_actions to mlx5e_tc_flow_parse_attr struction, max_mod_hdr_actions will store the max pedit action number we support and num_mod_hdr_actions indicates how many pedit action we used, and store all pedit action to mod_hdr_actions. Fixes: d79b6df6 ("net/mlx5e: Add parsing of TC pedit actions to HW format") Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 29dded89 ] When an ethernet frame is padded to meet the minimum ethernet frame size, the padding octets are not covered by the hardware checksum. Fortunately the padding octets are usually zero's, which don't affect checksum. However, it is not guaranteed. For example, switches might choose to make other use of these octets. This repeatedly causes kernel hardware checksum fault. Prior to the cited commit below, skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, we need to keep skb->csum updated. However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP headers, it does not worth the effort as the packets are so small that CHECKSUM_COMPLETE has no significant advantage. Future work: when reporting checksum complete is not an option for IP non-TCP/UDP packets, we can actually fallback to report checksum unnecessary, by looking at cqe IPOK bit. Fixes: 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Arthur Kiyanovski authored
[ Upstream commit e1f1bd9b ] Fix race condition between ena_update_on_link_change() and ena_restore_device(). This race can occur if link notification arrives while the driver is performing a reset sequence. In this case link can be set up, enabling the device, before it is fully restored. If packets are sent at this time, the driver might access uninitialized data structures, causing kernel crash. Move the clearing of ENA_FLAG_ONGOING_RESET and netif_carrier_on() after ena_up() to ensure the device is ready when link is set up. Fixes: d18e4f68 ("net: ena: fix race condition between device reset and link up setup") Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit d1f20798 ] genlmsg_reply can fail, so propagate its return code Fixes: 915d7e5e ("ipv6: sr: add code base for control plane support of SR-IPv6") Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 1ec17dbd ] Field idiag_ext in struct inet_diag_req_v2 used as bitmap of requested extensions has only 8 bits. Thus extensions starting from DCTCPINFO cannot be requested directly. Some of them included into response unconditionally or hook into some of lower 8 bits. Extension INET_DIAG_CLASS_ID has not way to request from the beginning. This patch bundle it with INET_DIAG_TCLASS (ipv6 tos), fixes space reservation, and documents behavior for other extensions. Also this patch adds fallback to reporting socket priority. This filed is more widely used for traffic classification because ipv4 sockets automatically maps TOS to priority and default qdisc pfifo_fast knows about that. But priority could be changed via setsockopt SO_PRIORITY so INET_DIAG_TOS isn't enough for predicting class. Also cgroup2 obsoletes net_cls classid (it always zero), but we cannot reuse this field for reporting cgroup2 id because it is 64-bit (ino+gen). So, after this patch INET_DIAG_CLASS_ID will report socket priority for most common setup when net_cls isn't set and/or cgroup2 in use. Fixes: 0888e372 ("net: inet: diag: expose sockets cgroup classid") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 4ffcbfac ] KMSAN reported batadv_interface_tx() was possibly using a garbage value [1] batadv_get_vid() does have a pskb_may_pull() call but batadv_interface_tx() does not actually make sure this did not fail. [1] BUG: KMSAN: uninit-value in batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 CPU: 0 PID: 10006 Comm: syz-executor469 Not tainted 4.20.0-rc7+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 __netdev_start_xmit include/linux/netdevice.h:4356 [inline] netdev_start_xmit include/linux/netdevice.h:4365 [inline] xmit_one net/core/dev.c:3257 [inline] dev_hard_start_xmit+0x607/0xc40 net/core/dev.c:3273 __dev_queue_xmit+0x2e42/0x3bc0 net/core/dev.c:3843 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3876 packet_snd net/packet/af_packet.c:2928 [inline] packet_sendmsg+0x8306/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x441889 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdda6fd468 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 0000000000441889 RDX: 000000000000000e RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007ffdda6fd4c0 R13: 00007ffdda6fd4b0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5220 sock_alloc_send_pskb+0xafd/0x10e0 net/core/sock.c:2083 packet_alloc_skb net/packet/af_packet.c:2781 [inline] packet_snd net/packet/af_packet.c:2872 [inline] packet_sendmsg+0x661a/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 7afa81c5 ] A recent commit in Clang expanded the -Wstring-plus-int warning, showing some odd behavior in this file. drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int] cinfo->version[j] = "\0\0" + 1; ~~~~~~~^~~ drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning cinfo->version[j] = "\0\0" + 1; ^ & [ ] 1 warning generated. This is equivalent to just "\0". Nick pointed out that it is smarter to use "" instead of "\0" because "" is used elsewhere in the kernel and can be deduplicated at the linking stage. Link: https://github.com/ClangBuiltLinux/linux/issues/309Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tariq Toukan authored
[ Upstream commit 7fdc1adc ] For representors, the TX dropped counter is not folded from the per-ring counters. Fix it. Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 479a2b76 ] Test that externally learned FDB entries can roam, but not age out. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 64254a20 ] The driver currently treats static FDB entries as both static and sticky. This is incorrect and prevents such entries from being roamed to a different port via learning. Fix this by configuring static entries with ageing disabled and roaming enabled. In net-next we can add proper support for the newly introduced 'sticky' flag. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
Alexander Petrovskiy <alexpe@mellanox.com> Reviewed-by:
-
Ido Schimmel authored
[ Upstream commit 710ae728 ] Externally learned entries can be added by a user or by a switch driver that is notifying the bridge driver about entries that were learned in hardware. In the first case, the entries are not marked with the 'added_by_user' flag, which causes switch drivers to ignore them and not offload them. The 'added_by_user' flag can be set on externally learned FDB entries based on the 'swdev_notify' parameter in br_fdb_external_learn_add(), which effectively means if the created / updated FDB entry was added by a user or not. Fixes: 816a3bed ("switchdev: Add fdb.added_by_user to switchdev notifications") Signed-off-by:
-
Nir Dotan authored
[ Upstream commit 67c14cc9 ] Return an appropriate error in the case when the driver timeouts on waiting for firmware to go out of PCI reset. Fixes: 233fa44b ("mlxsw: pci: Implement reset done check") Signed-off-by:
Nir Dotan <nird@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Madalin Bucur authored
[ Upstream commit c6ddfb9a ] As txq_trans_update() only updates trans_start when the lock is held, trans_start does not get updated if NETIF_F_LLTX is declared. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Peter Oskolkov authored
[ Upstream commit f4924f24 ] In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used to change sk_mark, sk_dst_reset(sk) is called. The same should be done in bpf_setsockopt(). Fixes: 8c4b4c7e ("bpf: Add setsockopt helper function to bpf") Reported-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
Peter Oskolkov <posk@google.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Reviewed-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 248b5701 ] When lp55xx_read() fails, "status" is an uninitialized variable and thus may contain random value; using it leads to undefined behaviors. The fix inserts a check for the return value of lp55xx_read: if it fails, returns with its error code. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Cheng-Min Ao authored
[ Upstream commit f422449b ] Correct a typo in OF device ID table The last one should be 'ti,tmp442' Signed-off-by:
Cheng-Min Ao <tony_ao@wiwynn.com> Signed-off-by:
Yu-Hsiang Chen <matt_chen@wiwynn.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit cb12d72b ] Shifting the 1 by exp by an int can lead to sign-extension overlow when exp is 31 since 1 is an signed int and sign-extending this result to an unsigned long long will set the upper 32 bits. Fix this by shifting an unsigned long. Detected by cppcheck: (warning) Shifting signed 32-bit value by 31 bits is undefined behaviour Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Stanislav Fomichev authored
[ Upstream commit f67ad87a ] While running test_progs in a loop I found out that I'm sometimes hitting "Didn't find expected build ID from the map" error. Looking at stack_map_get_build_id_offset() it seems that it is racy (by design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock current->mm->mmap_sem). Let's retry this test a single time. Fixes: 13790d1c ("bpf: add selftest for stackmap with build_id in NMI context") Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
Stanislav Fomichev authored
[ Upstream commit 4af396ae ] When returning BPF_STACK_BUILD_ID_IP from stack_map_get_build_id_offset, make sure that build_id field is empty. Since we are using percpu free list, there is a possibility that we might reuse some previous bpf_stack_build_id with non-zero build_id. Fixes: 615755a7 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Acked-by:
-
Stanislav Fomichev authored
[ Upstream commit 0b698005 ] Build-id length is not fixed to 20, it can be (`man ld` /--build-id): * 128-bit (uuid) * 160-bit (sha1) * any length specified in ld --build-id=0xhexstring To fix the issue of missing BPF_STACK_BUILD_ID_VALID for shorter build-ids, assume that build-id is somewhere in the range of 1 .. 20. Set the remaining bytes to zero. v2: * don't introduce new "len = min(BPF_BUILD_ID_SIZE, nhdr->n_descsz)", we already know that nhdr->n_descsz <= BPF_BUILD_ID_SIZE if we enter this 'if' condition Fixes: 615755a7 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Acked-by:
-
David Howells authored
[ Upstream commit 59d49076 ] Fix the refcounting of the authentication keys in the file locking code. The vnode->lock_key member points to a key on which it expects to be holding a ref, but it isn't always given an extra ref, however. Fixes: 0fafdc9f ("afs: Fix file locking") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Marc Dionne authored
[ Upstream commit 4882a27c ] A cb_interest record is not necessarily attached to the vnode on entry to afs_validate(), which can cause an oops when we try to bring the vnode's cb_s_break up to date in the default case (ie. no current callback promise and the vnode has not been deleted). Fix this by simply removing the line, as vnode->cb_s_break will be set when needed by afs_register_server_cb_interest() when we next get a callback promise from RPC call. The oops looks something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 ... RIP: 0010:afs_validate+0x66/0x250 [kafs] ... Call Trace: afs_d_revalidate+0x8d/0x340 [kafs] ? __d_lookup+0x61/0x150 lookup_dcache+0x44/0x70 ? lookup_dcache+0x44/0x70 __lookup_hash+0x24/0xa0 do_unlinkat+0x11d/0x2c0 __x64_sys_unlink+0x23/0x30 do_syscall_64+0x4d/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: ae3b7361 ("afs: Fix validation/callback interaction") Signed-off-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 91fa038d ] In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format specifier for the ife type changed from 0x%X to %#llX, causing systematic failures in the following TDC test cases: 7682 - Create valid ife encode action with mark and pass control ef47 - Create valid ife encode action with mark and pipe control df43 - Create valid ife encode action with mark and continue control e4cf - Create valid ife encode action with mark and drop control ccba - Create valid ife encode action with mark and reclassify control a1cf - Create valid ife encode action with mark and jump control cb3d - Create valid ife encode action with mark value at 32-bit maximum 95ed - Create valid ife encode action with prio and pass control aa17 - Create valid ife encode action with prio and pipe control 74c7 - Create valid ife encode action with prio and continue control 7a97 - Create valid ife encode action with prio and drop control f66b - Create valid ife encode action with prio and reclassify control 3056 - Create valid ife encode action with prio and jump control 7dd3 - Create valid ife encode action with prio value at 32-bit maximum 05bb - Create valid ife encode action with tcindex and pass control ce65 - Create valid ife encode action with tcindex and pipe control 09cd - Create valid ife encode action with tcindex and continue control 8eb5 - Create valid ife encode action with tcindex and continue control 451a - Create valid ife encode action with tcindex and drop control d76c - Create valid ife encode action with tcindex and reclassify control e731 - Create valid ife encode action with tcindex and jump control b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum 2a9c - Create valid ife encode action with mac src parameter cf5c - Create valid ife encode action with mac dst parameter 2353 - Create valid ife encode action with mac src and mac dst parameters 552c - Create valid ife encode action with mark and type parameters 0421 - Create valid ife encode action with prio and type parameters 4017 - Create valid ife encode action with tcindex and type parameters fac3 - Create valid ife encode action with index at 32-bit maximnum 7c25 - Create valid ife decode action with pass control dccb - Create valid ife decode action with pipe control 7bb9 - Create valid ife decode action with continue control d9ad - Create valid ife decode action with drop control 219f - Create valid ife decode action with reclassify control 8f44 - Create valid ife decode action with jump control b330 - Create ife encode action with cookie Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass both with old and new tc binaries. While at it, fix a small typo in test case fac3 ('maximnum'->'maximum'). Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 5216bd77 ] After commit 1c25324c ("net/sched: act_tunnel_key: Don't dump dst port if it wasn't set"), act_tunnel_key doesn't dump anymore the destination port, unless it was explicitly configured. This caused systematic failures in the following TDC test case: 7a88 - Add tunnel_key action with cookie parameter Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test pass again. Signed-off-by:
-
Davide Caratti authored
[ Upstream commit e4136155 ] After merge of commit 80ef0f22 ("net/sched: act_tunnel_key: Allow key-less tunnels"), act_tunnel_key does not reject anymore requests to install 'set' rules where the key id is missing. Therefore, drop the following TDC testcase: ba4e - Add tunnel_key set action with missing mandatory id parameter because it's going to become a systematic fail as soon as userspace iproute2 will start supporting key-less tunnels. Signed-off-by:
-
Wen Yang authored
[ Upstream commit b4711098 ] static checker warning: drivers/xen/pvcalls-front.c:373 alloc_active_ring() error: we previously assumed 'map->active.ring' could be null (see line 357) drivers/xen/pvcalls-front.c 351 static int alloc_active_ring(struct sock_mapping *map) 352 { 353 void *bytes; 354 355 map->active.ring = (struct pvcalls_data_intf *) 356 get_zeroed_page(GFP_KERNEL); 357 if (!map->active.ring) ^^^^^^^^^^^^^^^^^ Check 358 goto out; 359 360 map->active.ring->ring_order = PVCALLS_RING_ORDER; 361 bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 362 PVCALLS_RING_ORDER); 363 if (!bytes) 364 goto out; 365 366 map->active.data.in = bytes; 367 map->active.data.out = bytes + 368 XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER); 369 370 return 0; 371 372 out: --> 373 free_active_ring(map); ^^^ Add null check on map->active.ring before dereferencing it to avoid any NULL pointer dereferences. Fixes: 9f51c05d ("pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Suggested-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Reviewed-by:
-
Julia Lawall authored
[ Upstream commit 4bb0e6d7 ] The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put. Remote and port also have augmented reference counts, so drop them on each iteration and at the end of the function, respectively. Remote is only used for the address it contains, not for the contents of that address, so the reference count can be dropped immediately. The semantic patch that fixes the first part of this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child + of_node_put(child); ? break; ... } ... when != child // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/1547369264-24831-5-git-send-email-Julia.Lawall@lip6.frSigned-off-by:
-
Pavel Tikhomirov authored
[ Upstream commit 74ad7419 ] We've failed to copy and process vhost_iotlb_msg so let userspace at least know about it. For instance before these patch the code below runs without any error: int main() { struct vhost_msg msg; struct iovec iov; int fd; fd = open("/dev/vhost-net", O_RDWR); if (fd == -1) { perror("open"); return 1; } iov.iov_base = &msg; iov.iov_len = sizeof(msg)-4; if (writev(fd, &iov,1) == -1) { perror("writev"); return 1; } return 0; } Signed-off-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Charlene Liu authored
[ Upstream commit 20300db4 ] [Why] PPLIB not receive the PME when unplug. Signed-off-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
Chris Park <Chris.Park@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Felix Kuehling authored
[ Upstream commit bbdf514f ] dGPUs need their own topology devices. Don't assign them to APU topology devices with CPU cores. Bug: https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/issues/66Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Tested-by:
Elias Konstantinidis <ekondis@gmail.com> Acked-by:
-
Julia Lawall authored
[ Upstream commit f672b93e ] Add an of_node_put when the result of of_graph_get_remote_port_parent is not available. An of_node_put is also needed when meson_probe_remote completes. This was present at the recursive call, but not in the call from meson_drv_probe. The semantic match that finds this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @r exists@ local idexpression e; expression x; @@ e = of_graph_get_remote_port_parent(...); ... when != x = e when != true e == NULL when != of_node_put(e) when != of_fwnode_handle(e) ( return e; | *return ...; ) // </smpl> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Talons Lee authored
[ Upstream commit 5268c8f3 ] Commit e657fccb clears cpu capability bit instead of using fake cpuid value, the EXTD should always be off for PV guest without depending on cpuid value. So remove the cpuid check in xen_read_msr_safe() to always clear the X2APIC_ENABLE bit. Signed-off-by:
Talons Lee <xin.li@citrix.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Henry Yen authored
[ Upstream commit 2314e879 ] This patch uses nfct_help() to detect whether an established connection needs conntrack helper instead of using test_bit(IPS_HELPER_BIT, &ct->status). The reason is that IPS_HELPER_BIT is only set when using explicit CT target. However, in the case that a device enables conntrack helper via command "echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper", the status of IPS_HELPER_BIT will not present any change, and consequently it loses the checking ability in the context. Signed-off-by:
Henry Yen <henry.yen@mediatek.com> Reviewed-by:
Ryder Lee <ryder.lee@mediatek.com> Tested-by:
John Crispin <john@phrozen.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Varun Prakash authored
[ Upstream commit 9e8f1c79 ] In case of ->set_param() and ->bind_conn() cxgb4i driver does not wait for cmd completion, this can create race conditions, to avoid this add wait_for_completion(). Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Avri Altman authored
[ Upstream commit 9be9db9f ] Albeit we no longer rely on those hard-coded descriptor sizes, we still use them as our defaults, so better get it right. While adding its sysfs entries, we forgot to update the geometry descriptor size. It is 0x48 according to UFS2.1, and wasn't changed in UFS3.0. [mkp: typo] Fixes: c720c091 (scsi: ufs: sysfs: geometry descriptor) Signed-off-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
Manish Rangankar authored
[ Upstream commit 34a2ce88 ] When the driver finds invalid destination MAC for the first un-reachable target, and before completes the PATH_REQ operation, set new ep_state to OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper open-iscsi layer is notified to complete the login process on the first un-reachable target and thus proceed login to other reachable targets. Signed-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
