NFS_NGROUPS has been move to sunrpc, rename to UNX_NGROUPS.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Record flush/channel/content entries is useless, remove them.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

register_shrinker may return error when register fail, error out.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Since commit 4f52b6bb ("NFS: Don't call COMMIT in ->releasepage()"),
no tasks wait on PagePrivate, so the wake introduced in commit 95905446
("NFS: avoid deadlocks with loop-back mounted NFS filesystems.") can
be removed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

An interrupted rename will leave the old dentry behind if the rename
succeeds.  Fix this by moving the final local work of the rename to
rpc_call_done so that the results of the RENAME can always be handled,
even if the original process has already returned with -ERESTARTSYS.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Fixes the following sparse warning:

fs/nfs/nfs4state.c:862:60: warning: Using plain integer as NULL pointer
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Fixes the following sparse warning:

fs/nfs/flexfilelayout/flexfilelayout.c:2114:34: warning:
 symbol 'layoutreturn_ops' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The function is cleaner this way, since we can use the result of
memcmp() directly
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Once again, it's easier and cleaner just to return the error directly.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

This function doesn't add much, since all it does is access the server's
nfs_client variable.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

It's simpler just to return the status unconditionally
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

There is no need for a goto just to return an error code without any
cleanup.  Returning the error directly helps to clean up the code.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

We can cut out the if statement and return the results of the comparison
directly.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

This tracepoint displays information about the slot that was chosen for
the RPC, in addition to session information.  This could be useful
information for debugging, and we can set the session id hash to 0 to
indicate that there is no session.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

This creates a single place for all the work to happen, using the
presence of a session to determine if extra values need to be set.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Rather than implementing this twice for NFS v4.0 and v4.1
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

This puts the check in a single place, rather than needing to implement
it twice for v4.0 and v4.1.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The inline ifdef lets us put everything in a single place, rather than
having two (very similar) versions of this function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

This does the right thing depending on if we have a session, rather than
needing to handle this manually in multiple places.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

I want to have all callers use this function, rather than calling the
NFS v4.0 and v4.1 versions directly.  This includes pNFS, which only has
access to the nfs_client structure in some places.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pNFS only has access to the nfs_client structure, and not the
nfs_server, so we need to make this change so the function can be used
by pNFS as well.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

This puts session related functions together in the same space.  I only
keep one version of this function, since this variable will always be
NULL when using NFS v4.0.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

This function is a bit clumsy, incorrectly producing
",mountproto=" if mountd_protocol is 0 and !showdefaults,
and duplicating the code for reporting "auto".

Tidy it up so that it only makes a single seq_printf() call,
and more obviously does the right thing.

Fixes: ee671b01 ("NFS: convert proto= option to use netids rather than a protoname")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

1/ If we find an entry that is too young to be pruned,
  return SHRINK_STOP to ensure we don't get called again.
  This is more correct, and avoids wasting a little CPU time.
  Prior to 3.12, it can prevent drop_slab() from spinning indefinitely.

2/ Return a precise number from rpcauth_cache_shrink_count(), rather than
  rounding down to a multiple of 100 (of whatever sysctl_vfs_cache_pressure is).
  This ensures that when we "echo 3 > /proc/sys/vm/drop_caches", this cache is
  still purged, even if it has fewer than 100 entires.

Neither of these are really important, they just make behaviour
more predicatable, which can be helpful when debugging related issues.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Allow line continuations to work properly with KERN_CONT.
Signed-off-by: Joe Perches <joe@perches.com>
[Anna: Add fallback dprintk_cont() for when CONFIG_SUNRPC_DEBUG=n]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

I've seen this trigger twice now, where the i915_gem_object_to_ggtt()
call in intel_unpin_fb_obj() returns NULL, resulting in an oops
immediately afterwards as the (inlined) call to i915_vma_unpin_fence()
tries to dereference it.

It seems to be some race condition where the object is going away at
shutdown time, since both times happened when shutting down the X
server.  The call chains were different:

 - VT ioctl(KDSETMODE, KD_TEXT):

    intel_cleanup_plane_fb+0x5b/0xa0 [i915]
    drm_atomic_helper_cleanup_planes+0x6f/0x90 [drm_kms_helper]
    intel_atomic_commit_tail+0x749/0xfe0 [i915]
    intel_atomic_commit+0x3cb/0x4f0 [i915]
    drm_atomic_commit+0x4b/0x50 [drm]
    restore_fbdev_mode+0x14c/0x2a0 [drm_kms_helper]
    drm_fb_helper_restore_fbdev_mode_unlocked+0x34/0x80 [drm_kms_helper]
    drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper]
    intel_fbdev_set_par+0x18/0x70 [i915]
    fb_set_var+0x236/0x460
    fbcon_blank+0x30f/0x350
    do_unblank_screen+0xd2/0x1a0
    vt_ioctl+0x507/0x12a0
    tty_ioctl+0x355/0xc30
    do_vfs_ioctl+0xa3/0x5e0
    SyS_ioctl+0x79/0x90
    entry_SYSCALL_64_fastpath+0x13/0x94

 - i915 unpin_work workqueue:

    intel_unpin_work_fn+0x58/0x140 [i915]
    process_one_work+0x1f1/0x480
    worker_thread+0x48/0x4d0
    kthread+0x101/0x140

and this patch purely papers over the issue by adding a NULL pointer
check and a WARN_ON_ONCE() to avoid the oops that would then generally
make the machine unresponsive.

Other callers of i915_gem_object_to_ggtt() seem to also check for the
returned pointer being NULL and warn about it, so this clearly has
happened before in other places.

[ Reported it originally to the i915 developers on Jan 8, applying the
  ugly workaround on my own now after triggering the problem for the
  second time with no feedback.

  This is likely to be the same bug reported as

     https://bugs.freedesktop.org/show_bug.cgi?id=98829
     https://bugs.freedesktop.org/show_bug.cgi?id=99134

  which has a patch for the underlying problem, but it hasn't gotten to
  me, so I'm applying the workaround. ]

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull two parisc fixes from Helge Deller:
 "One fix to avoid usage of BITS_PER_LONG in user-space exported swab.h
  header which breaks compiling qemu, and one trivial fix for printk
  continuation in the parisc parport driver"

* 'parisc-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header
  parisc, parport_gsc: Fixes for printk continuation lines

Pull i2c fixes from Wolfram Sang:
 "Two I2C driver bugfixes.

  The 'VLLS mode support' patch should have been entitled 'reconfigure
  pinctrl after suspend' to make the bugfix more clear. Sorry, I missed
  that, yet didn't want to rebase"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx-lpi2c: add VLLS mode support
  i2c: i2c-cadence: Initialize configuration before probing devices

In swab.h the "#if BITS_PER_LONG > 32" breaks compiling userspace programs if
BITS_PER_LONG is #defined by userspace with the sizeof() compiler builtin.

Solve this problem by using __BITS_PER_LONG instead.  Since we now
#include asm/bitsperlong.h avoid further potential userspace pollution
by moving the #define of SHIFT_PER_LONG to bitops.h which is not
exported to userspace.

This patch unbreaks compiling qemu on hppa/parisc.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>

Signed-off-by: Helge Deller <deller@gmx.de>

Pull NFS client bugfixes from Trond Myklebust:
 "Stable patches:
   - NFSv4.1: Fix a deadlock in layoutget
   - NFSv4 must not bump sequence ids on NFS4ERR_MOVED errors
   - NFSv4 Fix a regression with OPEN EXCLUSIVE4 mode
   - Fix a memory leak when removing the SUNRPC module

  Bugfixes:
   - Fix a reference leak in _pnfs_return_layout"

* tag 'nfs-for-4.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  pNFS: Fix a reference leak in _pnfs_return_layout
  nfs: Fix "Don't increment lock sequence ID after NFS4ERR_MOVED"
  SUNRPC: cleanup ida information when removing sunrpc module
  NFSv4.0: always send mode in SETATTR after EXCLUSIVE4
  nfs: Don't increment lock sequence ID after NFS4ERR_MOVED
  NFSv4.1: Fix a deadlock in layoutget

Pull MD fixes from Shaohua Li:
 "This fixes several corner cases for raid5 cache, which is merged into
  this cycle"

* tag 'md/4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/r5cache: disable write back for degraded array
  md/r5cache: shift complex rmw from read path to write path
  md/r5cache: flush data only stripes in r5l_recovery_log()
  md/raid5: move comment of fetch_block to right location
  md/r5cache: read data into orig_page for prexor of cached data
  md/raid5-cache: delete meaningless code

Pull arm64 fix from Catalin Marinas:
 "Fix kernel panic on ACPI-based systems where CPU capacity description
  is not currently handled"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: skip register_cpufreq_notifier on ACPI-based systems