1. 17 Jul, 2019 40 commits
    • Linus Torvalds's avatar
      Merge tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc · 57ab5f74
      Linus Torvalds authored
      Pull hwspinlock updates from Bjorn Andersson:
       "This contains support for hardware spinlock TI K3 AM65x and J721E
        family of SoCs, support for using hwspinlocks from atomic context and
        better error reporting when dealing with hardware disabled in
        DeviceTree"
      
      * tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc:
        hwspinlock: add the 'in_atomic' API
        hwspinlock: document the hwspinlock 'raw' API
        hwspinlock: stm32: implement the relax() ops
        hwspinlock: ignore disabled device
        hwspinlock/omap: Add a trace during probe
        hwspinlock/omap: Add support for TI K3 SoCs
        dt-bindings: hwlock: Update OMAP binding for TI K3 SoCs
      57ab5f74
    • Linus Torvalds's avatar
      Merge tag 'rproc-v5.3' of git://github.com/andersson/remoteproc · fdcec004
      Linus Torvalds authored
      Pull remoteproc updates from Bjorn Andersson:
       "This adds support for the STM32 remoteproc, additional i.MX platforms
        with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP.
      
        Also initial support for vendor specific resource table entries and
        support for unprocessed Qualcomm firmware files"
      
      * tag 'rproc-v5.3' of git://github.com/andersson/remoteproc:
        remoteproc: stm32: fix building without ARM SMCC
        remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER
        remoteproc: copy parent dma_pfn_offset for vdev
        remoteproc: qcom: q6v5-mss: Support loading non-split images
        soc: qcom: mdt_loader: Support loading non-split images
        remoteproc: stm32: add an ST stm32_rproc driver
        dt-bindings: remoteproc: add bindings for stm32 remote processor driver
        dt-bindings: stm32: add bindings for ML-AHB interconnect
        remoteproc: Use struct_size() helper
        remoteproc: add vendor resources handling
        remoteproc: imx: Fix typo in "failed"
        remoteproc: imx: Broaden the Kconfig selection logic
        remoteproc,rpmsg: add missing MAINTAINERS file entries
        remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP
        dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
      fdcec004
    • Linus Torvalds's avatar
      Merge tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc · 7636b758
      Linus Torvalds authored
      Pull rpmsg updates from Bjorn Andersson:
       "This contains a DT binding update and a change to make the remote
        function of rpmsg_devices optional"
      
      * tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc:
        rpmsg: core: Make remove handler for rpmsg driver optional.
        dt-bindings: soc: qcom: Add remote-pid binding for GLINK SMEM
      7636b758
    • Linus Torvalds's avatar
      Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost · 3a1d5384
      Linus Torvalds authored
      Pull virtio, vhost updates from Michael Tsirkin:
       "Fixes, features, performance:
      
         - new iommu device
      
         - vhost guest memory access using vmap (just meta-data for now)
      
         - minor fixes"
      
      * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
        virtio-mmio: add error check for platform_get_irq
        scsi: virtio_scsi: Use struct_size() helper
        iommu/virtio: Add event queue
        iommu/virtio: Add probe request
        iommu: Add virtio-iommu driver
        PCI: OF: Initialize dev->fwnode appropriately
        of: Allow the iommu-map property to omit untranslated devices
        dt-bindings: virtio: Add virtio-pci-iommu node
        dt-bindings: virtio-mmio: Add IOMMU description
        vhost: fix clang build warning
        vhost: access vq metadata through kernel virtual address
        vhost: factor out setting vring addr and num
        vhost: introduce helpers to get the size of metadata area
        vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch()
        vhost: fine grain userspace memory accessors
        vhost: generalize adding used elem
      3a1d5384
    • Linus Torvalds's avatar
      Merge tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio · 37d4607e
      Linus Torvalds authored
      Pull VFIO updates from Alex Williamson:
      
       - Static symbol cleanup in mdev samples (Kefeng Wang)
      
       - Use vma help in nvlink code (Peng Hao)
      
       - Remove unused code in mbochs sample (YueHaibing)
      
       - Send uevents around mdev registration (Alex Williamson)
      
      * tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio:
        mdev: Send uevents around parent device registration
        sample/mdev/mbochs: remove set but not used variable 'mdev_state'
        vfio: vfio_pci_nvlink2: use a vma helper function
        vfio-mdev/samples: make some symbols static
      37d4607e
    • Linus Torvalds's avatar
      Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux · 916f562f
      Linus Torvalds authored
      Pull clk updates from Stephen Boyd:
       "This round of clk driver and framework updates is heavy on the driver
        update side. The two main highlights in the core framework are the
        addition of an bulk clk_get API that handles optional clks and an
        extra debugfs file that tells the developer about the current parent
        of a clk.
      
        The driver updates are dominated by i.MX in the diffstat, but that is
        mostly because that SoC has started converting to the clk_hw style of
        clk registration. The next big update is in the Amlogic meson clk
        driver that gained some support for audio, cpu, and temperature clks
        while fixing some PLL issues. Finally, the biggest thing that stands
        out is the conversion of a large part of the Allwinner sunxi-ng driver
        to the new clk parent scheme that uses less strings and more pointer
        comparisons to match clk parents and children up.
      
        In general, it looks like we have a lot of little fixes and tweaks
        here and there to clk data along with the normal addition of a handful
        of new drivers and a couple new core framework features.
      
        Core:
         - Add a 'clk_parent' file in clk debugfs
         - Add a clk_bulk_get_optional() API (with devm too)
      
        New Drivers:
         - Support gated clk controller on MIPS based BCM63XX SoCs
         - Support SiLabs Si5341 and Si5340 chips
         - Support for CPU clks on Raspberry Pi devices
         - Audsys clock driver for MediaTek MT8516 SoCs
      
        Updates:
         - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
         - Small frequency support for SiLabs Si544 chips
         - Slow clk support for AT91 SAM9X60 SoCs
         - Remove dead code in various clk drivers (-Wunused)
         - Support for Marvell 98DX1135 SoCs
         - Get duty cycle of generic pwm clks
         - Improvement in mmc phase calculation and cleanup of some rate defintions
         - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
         - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
         - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
         - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
         - Add clks for new Exynos5422 Dynamic Memory Controller driver
         - Clock definition for Exynos4412 Mali
         - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
         - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
         - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
         - TI clock probing done from DT by default instead of firmware
         - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
         - Add Amlogic meson8 audio clocks
         - Add Amlogic g12a temperature sensors clocks
         - Add Amlogic g12a and g12b cpu clocks
         - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
         - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
         - Add Clock Domain support on Renesas RZ/N1"
      
      * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
        clk: consoldiate the __clk_get_hw() declarations
        clk: sprd: Add check for return value of sprd_clk_regmap_init()
        clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
        clk: Add Si5341/Si5340 driver
        dt-bindings: clock: Add silabs,si5341
        clk: clk-si544: Implement small frequency change support
        clk: add BCM63XX gated clock controller driver
        devicetree: document the BCM63XX gated clock bindings
        clk: at91: sckc: use dedicated functions to unregister clock
        clk: at91: sckc: improve error path for sama5d4 sck registration
        clk: at91: sckc: remove unnecessary line
        clk: at91: sckc: improve error path for sam9x5 sck register
        clk: at91: sckc: add support to free slow clock osclillator
        clk: at91: sckc: add support to free slow rc oscillator
        clk: at91: sckc: add support to free slow oscillator
        clk: rockchip: export HDMIPHY clock on rk3228
        clk: rockchip: add watchdog pclk on rk3328
        clk: rockchip: add clock id for hdmi_phy special clock on rk3228
        clk: rockchip: add clock id for watchdog pclk on rk3328
        clk: at91: sckc: add support for SAM9X60
        ...
      916f562f
    • Linus Torvalds's avatar
      Merge tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux · edafb6fe
      Linus Torvalds authored
      Pull RTC updates from Alexandre Belloni:
       "A quiet cycle this time.
      
         - ds1307: properly handle oscillator failure flags
      
         - imx-sc: alarm support
      
         - pcf2123: alarm support, correct offset handling
      
         - sun6i: add R40 support
      
         - simplify getting the adapter of an i2c client"
      
      * tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits)
        rtc: wm831x: Add IRQF_ONESHOT flag
        rtc: stm32: remove one condition check in stm32_rtc_set_alarm()
        rtc: pcf2123: Fix build error
        rtc: interface: Change type of 'count' from int to u64
        rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
        rtc: pcf8563: Fix interrupt trigger method
        rtc: pcf2123: fix negative offset rounding
        rtc: pcf2123: add alarm support
        rtc: pcf2123: use %ptR
        rtc: pcf2123: port to regmap
        rtc: pcf2123: remove sysfs register view
        rtc: rx8025: simplify getting the adapter of a client
        rtc: rx8010: simplify getting the adapter of a client
        rtc: rv8803: simplify getting the adapter of a client
        rtc: m41t80: simplify getting the adapter of a client
        rtc: fm3130: simplify getting the adapter of a client
        rtc: tegra: Drop MODULE_ALIAS
        rtc: sun6i: Add R40 compatible
        dt-bindings: rtc: sun6i: Add the R40 RTC compatible
        dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
        ...
      edafb6fe
    • Linus Torvalds's avatar
      Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma · 47ebe00b
      Linus Torvalds authored
      Pull dmaengine updates from Vinod Koul:
      
       - Add support in dmaengine core to do device node checks for DT devices
         and update bunch of drivers to use that and remove open coding from
         drivers
      
       - New driver/driver support for new hardware, namely:
           - MediaTek UART APDMA
           - Freescale i.mx7ulp edma2
           - Synopsys eDMA IP core version 0
           - Allwinner H6 DMA
      
       - Updates to axi-dma and support for interleaved cyclic transfers
      
       - Greg's debugfs return value check removals on drivers
      
       - Updates to stm32-dma, hsu, dw, pl330, tegra drivers
      
      * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
        dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
        dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
        Documentation: dmaengine: clean up description of dmatest usage
        dmaengine: tegra210-adma: remove PM_CLK dependency
        dmaengine: fsl-edma: add i.mx7ulp edma2 version support
        dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
        dmaengine: fsl-edma-common: version check for v2 instead
        dmaengine: fsl-edma-common: move dmamux register to another single function
        dmaengine: fsl-edma: add drvdata for fsl-edma
        dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
        dmaengine: rcar-dmac: Reject zero-length slave DMA requests
        dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
        dmaengine: dw-edma: fix semicolon.cocci warnings
        dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
        dmaengine: dmatest: timeout value of -1 should specify infinite wait
        dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
        dmaengine: fsl-edma: support little endian for edma driver
        dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
        dmagengine: pl330: add code to get reset property
        dt-bindings: pl330: document the optional resets property
        ...
      47ebe00b
    • Linus Torvalds's avatar
      Merge tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux · fa121bb3
      Linus Torvalds authored
      Pull MIPS updates from Paul Burton:
       "A light batch this time around but significant improvements for
        certain systems:
      
         - Removal of readq & writeq for MIPS32 kernels where they would
           simply BUG() anyway, allowing drivers or other code that #ifdefs on
           their presence to work properly.
      
         - Improvements for Ingenic JZ4740 systems, including support for the
           external memory controller & pinmuxing fixes for qi_lb60/NanoNote
           systems.
      
         - Improvements for Lantiq systems, in particular around SMP & IPIs.
      
         - DT updates for ralink/MediaTek MT7628a systems to probe & configure
           a bunch more devices.
      
         - Miscellaneous cleanups & build fixes"
      
      * tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
        MIPS: fix some more fall through errors in arch/mips
        MIPS: perf events: handle switch statement falling through warnings
        mips/kprobes: Export kprobe_fault_handler()
        MAINTAINERS: Add myself as Ingenic SoCs maintainer
        MIPS: ralink: mt7628a.dtsi: Add watchdog controller DT node
        MIPS: ralink: mt7628a.dtsi: Add SPI controller DT node
        MIPS: ralink: mt7628a.dtsi: Add GPIO controller DT node
        MIPS: ralink: mt7628a.dtsi: Add pinctrl DT properties to the UART nodes
        MIPS: ralink: mt7628a.dtsi: Add pinmux DT node
        MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier
        MIPS: lantiq: Add SMP support for lantiq interrupt controller
        MIPS: lantiq: Shorten register names, remove unused macros
        MIPS: lantiq: Fix bitfield masking
        MIPS: lantiq: Remove unused macros
        MIPS: lantiq: Fix attributes of of_device_id structure
        MIPS: lantiq: Change variables to the same type as the source
        MIPS: lantiq: Move macro directly to iomem function
        mips: Remove q-accessors from non-64bit platforms
        FDDI: defza: Include linux/io-64-nonatomic-lo-hi.h
        MIPS: configs: Remove useless UEVENT_HELPER_PATH
        ...
      fa121bb3
    • Linus Torvalds's avatar
      Merge tag 'h8300-for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux · 7d4901c0
      Linus Torvalds authored
      Pull h8300 update from Yoshinori Sato:
       "Remove unused barrier defines"
      
      * tag 'h8300-for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
        H8300: remove unused barrier defines
      7d4901c0
    • Linus Torvalds's avatar
      Merge tag 'for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux · 415bfd9c
      Linus Torvalds authored
      Pull SH updates from Yoshinori Sato.
      
      kprobe fix, defconfig updates and a SH Kconfig fix.
      
      * tag 'for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
        arch/sh: Check for kprobe trap number before trying to handle a kprobe trap
        sh: configs: Remove useless UEVENT_HELPER_PATH
        Fix allyesconfig output.
      415bfd9c
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew) · 57a8ec38
      Linus Torvalds authored
      Merge more updates from Andrew Morton:
       "VM:
         - z3fold fixes and enhancements by Henry Burns and Vitaly Wool
      
         - more accurate reclaimed slab caches calculations by Yafang Shao
      
         - fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by
           Christoph Hellwig
      
         - !CONFIG_MMU fixes by Christoph Hellwig
      
         - new novmcoredd parameter to omit device dumps from vmcore, by
           Kairui Song
      
         - new test_meminit module for testing heap and pagealloc
           initialization, by Alexander Potapenko
      
         - ioremap improvements for huge mappings, by Anshuman Khandual
      
         - generalize kprobe page fault handling, by Anshuman Khandual
      
         - device-dax hotplug fixes and improvements, by Pavel Tatashin
      
         - enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V
      
         - add pte_devmap() support for arm64, by Robin Murphy
      
         - unify locked_vm accounting with a helper, by Daniel Jordan
      
         - several misc fixes
      
        core/lib:
         - new typeof_member() macro including some users, by Alexey Dobriyan
      
         - make BIT() and GENMASK() available in asm, by Masahiro Yamada
      
         - changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better
           code generation, by Alexey Dobriyan
      
         - rbtree code size optimizations, by Michel Lespinasse
      
         - convert struct pid count to refcount_t, by Joel Fernandes
      
        get_maintainer.pl:
         - add --no-moderated switch to skip moderated ML's, by Joe Perches
      
        misc:
         - ptrace PTRACE_GET_SYSCALL_INFO interface
      
         - coda updates
      
         - gdb scripts, various"
      
      [ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ]
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
        fs/select.c: use struct_size() in kmalloc()
        mm: add account_locked_vm utility function
        arm64: mm: implement pte_devmap support
        mm: introduce ARCH_HAS_PTE_DEVMAP
        mm: clean up is_device_*_page() definitions
        mm/mmap: move common defines to mman-common.h
        mm: move MAP_SYNC to asm-generic/mman-common.h
        device-dax: "Hotremove" persistent memory that is used like normal RAM
        mm/hotplug: make remove_memory() interface usable
        device-dax: fix memory and resource leak if hotplug fails
        include/linux/lz4.h: fix spelling and copy-paste errors in documentation
        ipc/mqueue.c: only perform resource calculation if user valid
        include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
        scripts/gdb: add helpers to find and list devices
        scripts/gdb: add lx-genpd-summary command
        drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
        kernel/pid.c: convert struct pid count to refcount_t
        drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
        select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()
        select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR
        ...
      57a8ec38
    • Gustavo A. R. Silva's avatar
      fs/select.c: use struct_size() in kmalloc() · 43e11fa2
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array.  For example:
      
        struct foo {
             int stuff;
             struct boo entry[];
        };
      
        size = sizeof(struct foo) + count * sizeof(struct boo);
        instance = kmalloc(size, GFP_KERNEL);
      
      Instead of leaving these open-coded and prone to type mistakes, we can now
      use the new struct_size() helper:
      
        instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
      
      Also, notice that variable size is unnecessary, hence it is removed.
      
      This code was detected with the help of Coccinelle.
      
      Link: http://lkml.kernel.org/r/20190604164226.GA13823@embeddedorSigned-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      43e11fa2
    • Daniel Jordan's avatar
      mm: add account_locked_vm utility function · 79eb597c
      Daniel Jordan authored
      locked_vm accounting is done roughly the same way in five places, so
      unify them in a helper.
      
      Include the helper's caller in the debug print to distinguish between
      callsites.
      
      Error codes stay the same, so user-visible behavior does too.  The one
      exception is that the -EPERM case in tce_account_locked_vm is removed
      because Alexey has never seen it triggered.
      
      [daniel.m.jordan@oracle.com: v3]
        Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com
      [sfr@canb.auug.org.au: fix mm/util.c]
      Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.comSigned-off-by: default avatarDaniel Jordan <daniel.m.jordan@oracle.com>
      Signed-off-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
      Tested-by: default avatarAlexey Kardashevskiy <aik@ozlabs.ru>
      Acked-by: default avatarAlex Williamson <alex.williamson@redhat.com>
      Cc: Alan Tull <atull@kernel.org>
      Cc: Alex Williamson <alex.williamson@redhat.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Christophe Leroy <christophe.leroy@c-s.fr>
      Cc: Davidlohr Bueso <dave@stgolabs.net>
      Cc: Jason Gunthorpe <jgg@mellanox.com>
      Cc: Mark Rutland <mark.rutland@arm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Moritz Fischer <mdf@kernel.org>
      Cc: Paul Mackerras <paulus@ozlabs.org>
      Cc: Steve Sistare <steven.sistare@oracle.com>
      Cc: Wu Hao <hao.wu@intel.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      79eb597c
    • Robin Murphy's avatar
      arm64: mm: implement pte_devmap support · 73b20c84
      Robin Murphy authored
      In order for things like get_user_pages() to work on ZONE_DEVICE memory,
      we need a software PTE bit to identify device-backed PFNs.  Hook this up
      along with the relevant helpers to join in with ARCH_HAS_PTE_DEVMAP.
      
      [robin.murphy@arm.com: build fixes]
        Link: http://lkml.kernel.org/r/13026c4e64abc17133bbfa07d7731ec6691c0bcd.1559050949.git.robin.murphy@arm.com
      Link: http://lkml.kernel.org/r/817d92886fc3b33bcbf6e105ee83a74babb3a5aa.1558547956.git.robin.murphy@arm.comSigned-off-by: default avatarRobin Murphy <robin.murphy@arm.com>
      Acked-by: default avatarWill Deacon <will.deacon@arm.com>
      Cc: Anshuman Khandual <anshuman.khandual@arm.com>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: David Hildenbrand <david@redhat.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Jerome Glisse <jglisse@redhat.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Oliver O'Halloran <oohall@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      73b20c84
    • Robin Murphy's avatar
      mm: introduce ARCH_HAS_PTE_DEVMAP · 17596731
      Robin Murphy authored
      ARCH_HAS_ZONE_DEVICE is somewhat meaningless in itself, and combined
      with the long-out-of-date comment can lead to the impression than an
      architecture may just enable it (since __add_pages() now "comprehends
      device memory" for itself) and expect things to work.
      
      In practice, however, ZONE_DEVICE users have little chance of
      functioning correctly without __HAVE_ARCH_PTE_DEVMAP, so let's clean
      that up the same way as ARCH_HAS_PTE_SPECIAL and make it the proper
      dependency so the real situation is clearer.
      
      Link: http://lkml.kernel.org/r/87554aa78478a02a63f2c4cf60a847279ae3eb3b.1558547956.git.robin.murphy@arm.comSigned-off-by: default avatarRobin Murphy <robin.murphy@arm.com>
      Acked-by: default avatarDan Williams <dan.j.williams@intel.com>
      Reviewed-by: default avatarIra Weiny <ira.weiny@intel.com>
      Acked-by: default avatarOliver O'Halloran <oohall@gmail.com>
      Reviewed-by: default avatarAnshuman Khandual <anshuman.khandual@arm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: David Hildenbrand <david@redhat.com>
      Cc: Jerome Glisse <jglisse@redhat.com>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      17596731
    • Robin Murphy's avatar
      mm: clean up is_device_*_page() definitions · 7588adf8
      Robin Murphy authored
      Refactor is_device_{public,private}_page() with is_pci_p2pdma_page() to
      make them all consistent in depending on their respective config options
      even when CONFIG_DEV_PAGEMAP_OPS is enabled for other reasons.  This
      allows a little more compile-time optimisation as well as the conceptual
      and cosmetic cleanup.
      
      Link: http://lkml.kernel.org/r/187c2ab27dea70635d375a61b2f2076d26c032b0.1558547956.git.robin.murphy@arm.comSigned-off-by: default avatarRobin Murphy <robin.murphy@arm.com>
      Suggested-by: default avatarJerome Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarAnshuman Khandual <anshuman.khandual@arm.com>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: David Hildenbrand <david@redhat.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Oliver O'Halloran <oohall@gmail.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7588adf8
    • Aneesh Kumar K.V's avatar
      mm/mmap: move common defines to mman-common.h · 8aa3c927
      Aneesh Kumar K.V authored
      Two architecture that use arch specific MMAP flags are powerpc and
      sparc.  We still have few flag values common across them and other
      architectures.  Consolidate this in mman-common.h.
      
      Also update the comment to indicate where to find HugeTLB specific
      reserved values
      
      Link: http://lkml.kernel.org/r/20190604090950.31417-1-aneesh.kumar@linux.ibm.comSigned-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8aa3c927
    • Aneesh Kumar K.V's avatar
      mm: move MAP_SYNC to asm-generic/mman-common.h · 22fcea6f
      Aneesh Kumar K.V authored
      This enables support for synchronous DAX fault on powerpc
      
      The generic changes are added as part of b6fb293f ("mm: Define
      MAP_SYNC and VM_SYNC flags")
      
      Without this, mmap returns EOPNOTSUPP for MAP_SYNC with
      MAP_SHARED_VALIDATE
      
      Instead of adding MAP_SYNC with same value to
      arch/powerpc/include/uapi/asm/mman.h, I am moving the #define to
      asm-generic/mman-common.h.  Two architectures using mman-common.h
      directly are sparc and powerpc.  We should be able to consloidate more
      #defines to mman-common.h.  That can be done as a separate patch.
      
      Link: http://lkml.kernel.org/r/20190528091120.13322-1-aneesh.kumar@linux.ibm.comSigned-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
      Reviewed-by: default avatarJan Kara <jack@suse.cz>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      22fcea6f
    • Pavel Tatashin's avatar
      device-dax: "Hotremove" persistent memory that is used like normal RAM · 9f960da7
      Pavel Tatashin authored
      It is now allowed to use persistent memory like a regular RAM, but
      currently there is no way to remove this memory until machine is
      rebooted.
      
      This work expands the functionality to also allows hotremoving
      previously hotplugged persistent memory, and recover the device for use
      for other purposes.
      
      To hotremove persistent memory, the management software must first
      offline all memory blocks of dax region, and than unbind it from
      device-dax/kmem driver.  So, operations should look like this:
      
        echo offline > /sys/devices/system/memory/memoryN/state
        ...
        echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
      
      Note: if unbind is done without offlining memory beforehand, it won't be
      possible to do dax0.0 hotremove, and dax's memory is going to be part of
      System RAM until reboot.
      
      Link: http://lkml.kernel.org/r/20190517215438.6487-4-pasha.tatashin@soleen.comSigned-off-by: default avatarPavel Tatashin <pasha.tatashin@soleen.com>
      Reviewed-by: default avatarDavid Hildenbrand <david@redhat.com>
      Cc: James Morris <jmorris@namei.org>
      Cc: Sasha Levin <sashal@kernel.org>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Keith Busch <keith.busch@intel.com>
      Cc: Vishal Verma <vishal.l.verma@intel.com>
      Cc: Dave Jiang <dave.jiang@intel.com>
      Cc: Ross Zwisler <zwisler@kernel.org>
      Cc: Tom Lendacky <thomas.lendacky@amd.com>
      Cc: Huang Ying <ying.huang@intel.com>
      Cc: Fengguang Wu <fengguang.wu@intel.com>
      Cc: Borislav Petkov <bp@suse.de>
      Cc: Bjorn Helgaas <bhelgaas@google.com>
      Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
      Cc: Takashi Iwai <tiwai@suse.de>
      Cc: Jérôme Glisse <jglisse@redhat.com>
      Cc: Dave Hansen <dave.hansen@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9f960da7
    • Pavel Tatashin's avatar
      mm/hotplug: make remove_memory() interface usable · eca499ab
      Pavel Tatashin authored
      Presently the remove_memory() interface is inherently broken.  It tries
      to remove memory but panics if some memory is not offline.  The problem
      is that it is impossible to ensure that all memory blocks are offline as
      this function also takes lock_device_hotplug that is required to change
      memory state via sysfs.
      
      So, between calling this function and offlining all memory blocks there
      is always a window when lock_device_hotplug is released, and therefore,
      there is always a chance for a panic during this window.
      
      Make this interface to return an error if memory removal fails.  This
      way it is safe to call this function without panicking machine, and also
      makes it symmetric to add_memory() which already returns an error.
      
      Link: http://lkml.kernel.org/r/20190517215438.6487-3-pasha.tatashin@soleen.comSigned-off-by: default avatarPavel Tatashin <pasha.tatashin@soleen.com>
      Reviewed-by: default avatarDavid Hildenbrand <david@redhat.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.com>
      Cc: Bjorn Helgaas <bhelgaas@google.com>
      Cc: Borislav Petkov <bp@suse.de>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Dave Hansen <dave.hansen@intel.com>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: Dave Jiang <dave.jiang@intel.com>
      Cc: Fengguang Wu <fengguang.wu@intel.com>
      Cc: Huang Ying <ying.huang@intel.com>
      Cc: James Morris <jmorris@namei.org>
      Cc: Jérôme Glisse <jglisse@redhat.com>
      Cc: Keith Busch <keith.busch@intel.com>
      Cc: Ross Zwisler <zwisler@kernel.org>
      Cc: Sasha Levin <sashal@kernel.org>
      Cc: Takashi Iwai <tiwai@suse.de>
      Cc: Tom Lendacky <thomas.lendacky@amd.com>
      Cc: Vishal Verma <vishal.l.verma@intel.com>
      Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      eca499ab
    • Pavel Tatashin's avatar
      device-dax: fix memory and resource leak if hotplug fails · 31e4ca92
      Pavel Tatashin authored
      Patch series ""Hotremove" persistent memory", v6.
      
      Recently, adding a persistent memory to be used like a regular RAM was
      added to Linux.  This work extends this functionality to also allow hot
      removing persistent memory.
      
      We (Microsoft) have an important use case for this functionality.
      
      The requirement is for physical machines with small amount of RAM (~8G)
      to be able to reboot in a very short period of time (<1s).  Yet, there
      is a userland state that is expensive to recreate (~2G).
      
      The solution is to boot machines with 2G preserved for persistent
      memory.
      
      Copy the state, and hotadd the persistent memory so machine still has
      all 8G available for runtime.  Before reboot, offline and hotremove
      device-dax 2G, copy the memory that is needed to be preserved to pmem0
      device, and reboot.
      
      The series of operations look like this:
      
      1. After boot restore /dev/pmem0 to ramdisk to be consumed by apps.
         and free ramdisk.
      2. Convert raw pmem0 to devdax
         ndctl create-namespace --mode devdax --map mem -e namespace0.0 -f
      3. Hotadd to System RAM
         echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind
         echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id
         echo online_movable > /sys/devices/system/memoryXXX/state
      4. Before reboot hotremove device-dax memory from System RAM
         echo offline > /sys/devices/system/memoryXXX/state
         echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
      5. Create raw pmem0 device
         ndctl create-namespace --mode raw  -e namespace0.0 -f
      6. Copy the state that was stored by apps to ramdisk to pmem device
      7. Do kexec reboot or reboot through firmware if firmware does not
         zero memory in pmem0 region (These machines have only regular
         volatile memory). So to have pmem0 device either memmap kernel
         parameter is used, or devices nodes in dtb are specified.
      
      This patch (of 3):
      
      When add_memory() fails, the resource and the memory should be freed.
      
      Link: http://lkml.kernel.org/r/20190517215438.6487-2-pasha.tatashin@soleen.com
      Fixes: c221c0b0 ("device-dax: "Hotplug" persistent memory for use like normal RAM")
      Signed-off-by: default avatarPavel Tatashin <pasha.tatashin@soleen.com>
      Reviewed-by: default avatarDave Hansen <dave.hansen@intel.com>
      Cc: Bjorn Helgaas <bhelgaas@google.com>
      Cc: Borislav Petkov <bp@suse.de>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: Dave Jiang <dave.jiang@intel.com>
      Cc: David Hildenbrand <david@redhat.com>
      Cc: Fengguang Wu <fengguang.wu@intel.com>
      Cc: Huang Ying <ying.huang@intel.com>
      Cc: James Morris <jmorris@namei.org>
      Cc: Jérôme Glisse <jglisse@redhat.com>
      Cc: Keith Busch <keith.busch@intel.com>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Ross Zwisler <zwisler@kernel.org>
      Cc: Sasha Levin <sashal@kernel.org>
      Cc: Takashi Iwai <tiwai@suse.de>
      Cc: Tom Lendacky <thomas.lendacky@amd.com>
      Cc: Vishal Verma <vishal.l.verma@intel.com>
      Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      31e4ca92
    • Tom Levy's avatar
      include/linux/lz4.h: fix spelling and copy-paste errors in documentation · 97a0efea
      Tom Levy authored
      Fix a few spelling and grammar errors, and two places where fast/safe in
      the documentation did not match the function.
      
      Link: http://lkml.kernel.org/r/20190321014452.13297-1-tomlevy93@gmail.comSigned-off-by: default avatarTom Levy <tomlevy93@gmail.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Cc: Jiri Kosina <trivial@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      97a0efea
    • Kees Cook's avatar
      ipc/mqueue.c: only perform resource calculation if user valid · a318f12e
      Kees Cook authored
      Andreas Christoforou reported:
      
        UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow:
        9 * 2305843009213693951 cannot be represented in type 'long int'
        ...
        Call Trace:
          mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414
          evict+0x472/0x8c0 fs/inode.c:558
          iput_final fs/inode.c:1547 [inline]
          iput+0x51d/0x8c0 fs/inode.c:1573
          mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320
          mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459
          vfs_mkobj+0x39e/0x580 fs/namei.c:2892
          prepare_open ipc/mqueue.c:731 [inline]
          do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771
      
      Which could be triggered by:
      
              struct mq_attr attr = {
                      .mq_flags = 0,
                      .mq_maxmsg = 9,
                      .mq_msgsize = 0x1fffffffffffffff,
                      .mq_curmsgs = 0,
              };
      
              if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1)
                      perror("mq_open");
      
      mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and
      preparing to return -EINVAL.  During the cleanup, it calls
      mqueue_evict_inode() which performed resource usage tracking math for
      updating "user", before checking if there was a valid "user" at all
      (which would indicate that the calculations would be sane).  Instead,
      delay this check to after seeing a valid "user".
      
      The overflow was real, but the results went unused, so while the flaw is
      harmless, it's noisy for kernel fuzzers, so just fix it by moving the
      calculation under the non-NULL "user" where it actually gets used.
      
      Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescookSigned-off-by: default avatarKees Cook <keescook@chromium.org>
      Reported-by: default avatarAndreas Christoforou <andreaschristofo@gmail.com>
      Acked-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Davidlohr Bueso <dave@stgolabs.net>
      Cc: Manfred Spraul <manfred@colorfullife.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a318f12e
    • Drew Davenport's avatar
      include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures · 6b15f678
      Drew Davenport authored
      For architectures using __WARN_TAINT, the WARN_ON macro did not print
      out the "cut here" string.  The other WARN_XXX macros would print "cut
      here" inside __warn_printk, which is not called for WARN_ON since it
      doesn't have a message to print.
      
      Link: http://lkml.kernel.org/r/20190624154831.163888-1-ddavenport@chromium.org
      Fixes: a7bed27a ("bug: fix "cut here" location for __WARN_TAINT architectures")
      Signed-off-by: default avatarDrew Davenport <ddavenport@chromium.org>
      Acked-by: default avatarKees Cook <keescook@chromium.org>
      Tested-by: default avatarKees Cook <keescook@chromium.org>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6b15f678
    • Leonard Crestez's avatar
      scripts/gdb: add helpers to find and list devices · 778c1f5c
      Leonard Crestez authored
      Add helper commands and functions for finding pointers to struct device
      by enumerating linux device bus/class infrastructure.  This can be used
      to fetch subsystem and driver-specific structs:
      
        (gdb) p *$container_of($lx_device_find_by_class_name("net", "eth0"), "struct net_device", "dev")
        (gdb) p *$container_of($lx_device_find_by_bus_name("i2c", "0-004b"), "struct i2c_client", "dev")
        (gdb) p *(struct imx_port*)$lx_device_find_by_class_name("tty", "ttymxc1")->parent->driver_data
      
      Several generic "lx-device-list" functions are included to enumerate
      devices by bus and class:
      
        (gdb) lx-device-list-bus usb
        (gdb) lx-device-list-class
        (gdb) lx-device-list-tree &platform_bus
      
      Similar information is available in /sys but pointer values are
      deliberately hidden.
      
      Link: http://lkml.kernel.org/r/c948628041311cbf1b9b4cff3dda7d2073cb3eaa.1561492937.git.leonard.crestez@nxp.comSigned-off-by: default avatarLeonard Crestez <leonard.crestez@nxp.com>
      Reviewed-by: default avatarStephen Boyd <sboyd@kernel.org>
      Cc: Kieran Bingham <kbingham@kernel.org>
      Cc: Jan Kiszka <jan.kiszka@siemens.com>
      Cc: "Rafael J. Wysocki" <rafael@kernel.org>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      778c1f5c
    • Leonard Crestez's avatar
      scripts/gdb: add lx-genpd-summary command · 8207d4a8
      Leonard Crestez authored
      This is like /sys/kernel/debug/pm/pm_genpd_summary except it's
      accessible through a debugger.
      
      This can be useful if the target crashes or hangs because power domains
      were not properly enabled.
      
      Link: http://lkml.kernel.org/r/f9ee627a0d4f94b894aa202fee8a98444049bed8.1561492937.git.leonard.crestez@nxp.comSigned-off-by: default avatarLeonard Crestez <leonard.crestez@nxp.com>
      Reviewed-by: default avatarStephen Boyd <sboyd@kernel.org>
      Cc: Kieran Bingham <kbingham@kernel.org>
      Cc: Jan Kiszka <jan.kiszka@siemens.com>
      Cc: "Rafael J. Wysocki" <rafael@kernel.org>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8207d4a8
    • Miroslav Lichvar's avatar
      drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl · 5515e9a6
      Miroslav Lichvar authored
      The PPS assert/clear offset corrections are set by the PPS_SETPARAMS
      ioctl in the pps_ktime structs, which also contain flags.  The flags are
      not initialized by applications (using the timepps.h header) and they
      are not used by the kernel for anything except returning them back in
      the PPS_GETPARAMS ioctl.
      
      Set the flags to zero to make it clear they are unused and avoid leaking
      uninitialized data of the PPS_SETPARAMS caller to other applications
      that have a read access to the PPS device.
      
      Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.comSigned-off-by: default avatarMiroslav Lichvar <mlichvar@redhat.com>
      Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Acked-by: default avatarRodolfo Giometti <giometti@enneenne.com>
      Cc: Greg KH <greg@kroah.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5515e9a6
    • Joel Fernandes (Google)'s avatar
      kernel/pid.c: convert struct pid count to refcount_t · f57e515a
      Joel Fernandes (Google) authored
      struct pid's count is an atomic_t field used as a refcount.  Use
      refcount_t for it which is basically atomic_t but does additional
      checking to prevent use-after-free bugs.
      
      For memory ordering, the only change is with the following:
      
       -	if ((atomic_read(&pid->count) == 1) ||
       -	     atomic_dec_and_test(&pid->count)) {
       +	if (refcount_dec_and_test(&pid->count)) {
       		kmem_cache_free(ns->pid_cachep, pid);
      
      Here the change is from: Fully ordered --> RELEASE + ACQUIRE (as per
      refcount-vs-atomic.rst) This ACQUIRE should take care of making sure the
      free happens after the refcount_dec_and_test().
      
      The above hunk also removes atomic_read() since it is not needed for the
      code to work and it is unclear how beneficial it is.  The removal lets
      refcount_dec_and_test() check for cases where get_pid() happened before
      the object was freed.
      
      Link: http://lkml.kernel.org/r/20190701183826.191936-1-joel@joelfernandes.orgSigned-off-by: default avatarJoel Fernandes (Google) <joel@joelfernandes.org>
      Reviewed-by: default avatarAndrea Parri <andrea.parri@amarulasolutions.com>
      Reviewed-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
      Cc: Elena Reshetova <elena.reshetova@intel.com>
      Cc: Jann Horn <jannh@google.com>
      Cc: Eric W. Biederman <ebiederm@xmission.com>
      Cc: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com>
      Cc: Michal Hocko <mhocko@suse.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f57e515a
    • Dan Carpenter's avatar
      drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings · 156e0b1a
      Dan Carpenter authored
      The dev_info.name[] array has space for RIO_MAX_DEVNAME_SZ + 1
      characters.  But the problem here is that we don't ensure that the user
      put a NUL terminator on the end of the string.  It could lead to an out
      of bounds read.
      
      Link: http://lkml.kernel.org/r/20190529110601.GB19119@mwanda
      Fixes: e8de3701 ("rapidio: add mport char device driver")
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Acked-by: default avatarAlexandre Bounine <alex.bou9@gmail.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      156e0b1a
    • Oleg Nesterov's avatar
      select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining() · ac301020
      Oleg Nesterov authored
      Now that restore_saved_sigmask_unless() is always called with the same
      argument right before poll_select_copy_remaining() we can move it into
      poll_select_copy_remaining() and make it the only caller of restore() in
      fs/select.c.
      
      The patch also renames poll_select_copy_remaining(),
      poll_select_finish() looks better after this change.
      
      kern_select() doesn't use set_user_sigmask(), so in this case
      poll_select_finish() does restore_saved_sigmask_unless() "for no
      reason".  But this won't hurt, and WARN_ON(!TIF_SIGPENDING) is still
      valid.
      
      Link: http://lkml.kernel.org/r/20190606140915.GC13440@redhat.comSigned-off-by: default avatarOleg Nesterov <oleg@redhat.com>
      Cc: Al Viro <viro@ZenIV.linux.org.uk>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: David Laight <David.Laight@aculab.com>
      Cc: Davidlohr Bueso <dave@stgolabs.net>
      Cc: Deepa Dinamani <deepa.kernel@gmail.com>
      Cc: Eric W. Biederman <ebiederm@xmission.com>
      Cc: Eric Wong <e@80x24.org>
      Cc: Jason Baron <jbaron@akamai.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ac301020
    • Oleg Nesterov's avatar
      select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR · 8cf8b553
      Oleg Nesterov authored
      do_poll() returns -EINTR if interrupted and after that all its callers
      have to translate it into -ERESTARTNOHAND.  Change do_poll() to return
      -ERESTARTNOHAND and update (simplify) the callers.
      
      Note that this also unifies all users of restore_saved_sigmask_unless(),
      see the next patch.
      
      Linus:
      
      : The *right* return value will actually be then chosen by
      : poll_select_copy_remaining(), which will turn ERESTARTNOHAND to EINTR
      : when it can't update the timeout.
      :
      : Except for the cases that use restart_block and do that instead and
      : don't have the whole timeout restart issue as a result.
      
      Link: http://lkml.kernel.org/r/20190606140852.GB13440@redhat.comSigned-off-by: default avatarOleg Nesterov <oleg@redhat.com>
      Acked-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Cc: Al Viro <viro@ZenIV.linux.org.uk>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: David Laight <David.Laight@aculab.com>
      Cc: Davidlohr Bueso <dave@stgolabs.net>
      Cc: Deepa Dinamani <deepa.kernel@gmail.com>
      Cc: Eric W. Biederman <ebiederm@xmission.com>
      Cc: Eric Wong <e@80x24.org>
      Cc: Jason Baron <jbaron@akamai.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8cf8b553
    • Oleg Nesterov's avatar
      signal: simplify set_user_sigmask/restore_user_sigmask · b772434b
      Oleg Nesterov authored
      task->saved_sigmask and ->restore_sigmask are only used in the ret-from-
      syscall paths.  This means that set_user_sigmask() can save ->blocked in
      ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked
      was modified.
      
      This way the callers do not need 2 sigset_t's passed to set/restore and
      restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns
      into the trivial helper which just calls restore_saved_sigmask().
      
      Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.comSigned-off-by: default avatarOleg Nesterov <oleg@redhat.com>
      Cc: Deepa Dinamani <deepa.kernel@gmail.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: Davidlohr Bueso <dave@stgolabs.net>
      Cc: Eric Wong <e@80x24.org>
      Cc: Jason Baron <jbaron@akamai.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Al Viro <viro@ZenIV.linux.org.uk>
      Cc: Eric W. Biederman <ebiederm@xmission.com>
      Cc: David Laight <David.Laight@aculab.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b772434b
    • Alexey Dobriyan's avatar
      signal: reorder struct sighand_struct · e2d9018e
      Alexey Dobriyan authored
      struct sighand_struct::siglock field is the most used field by far, put
      it first so that is can be accessed without IMM8 or IMM32 encoding on
      x86_64.
      
      Space savings (on trimmed down VM test config):
      
      add/remove: 0/0 grow/shrink: 8/68 up/down: 49/-1147 (-1098)
      Function                                     old     new   delta
      complete_signal                              512     533     +21
      do_signalfd4                                 335     346     +11
      __cleanup_sighand                             39      43      +4
      unhandled_signal                              49      52      +3
      prepare_signal                               692     695      +3
      ignore_signals                                37      40      +3
      __tty_check_change.part                      248     251      +3
      ksys_unshare                                 780     781      +1
      sighand_ctor                                  33      29      -4
      ptrace_trap_notify                            60      56      -4
      sigqueue_free                                 98      91      -7
      run_posix_cpu_timers                        1389    1382      -7
      proc_pid_status                             2448    2441      -7
      proc_pid_limits                              344     337      -7
      posix_cpu_timer_rearm                        222     215      -7
      posix_cpu_timer_get                          249     242      -7
      kill_pid_info_as_cred                        243     236      -7
      freeze_task                                  197     190      -7
      flush_old_exec                              1873    1866      -7
      do_task_stat                                3363    3356      -7
      do_send_sig_info                              98      91      -7
      do_group_exit                                147     140      -7
      init_sighand                                2088    2080      -8
      do_notify_parent_cldstop                     399     391      -8
      signalfd_cleanup                              50      41      -9
      do_notify_parent                             557     545     -12
      __send_signal                               1029    1017     -12
      ptrace_stop                                  590     577     -13
      get_signal                                  1576    1563     -13
      __lock_task_sighand                          112      99     -13
      zap_pid_ns_processes                         391     377     -14
      update_rlimit_cpu                             78      64     -14
      tty_signal_session_leader                    413     399     -14
      tty_open_proc_set_tty                        149     135     -14
      tty_jobctrl_ioctl                            936     922     -14
      set_cpu_itimer                               339     325     -14
      ptrace_resume                                226     212     -14
      ptrace_notify                                110      96     -14
      proc_clear_tty                                81      67     -14
      posix_cpu_timer_del                          229     215     -14
      kernel_sigaction                             156     142     -14
      getrusage                                    977     963     -14
      get_current_tty                               98      84     -14
      force_sigsegv                                 89      75     -14
      force_sig_info                               205     191     -14
      flush_signals                                 83      69     -14
      flush_itimer_signals                          85      71     -14
      do_timer_create                             1120    1106     -14
      do_sigpending                                 88      74     -14
      do_signal_stop                               537     523     -14
      cgroup_init_fs_context                       644     630     -14
      call_usermodehelper_exec_async               402     388     -14
      calculate_sigpending                          58      44     -14
      __x64_sys_timer_delete                       248     234     -14
      __set_current_blocked                         80      66     -14
      __ptrace_unlink                              310     296     -14
      __ptrace_detach.part                         187     173     -14
      send_sigqueue                                362     347     -15
      get_cpu_itimer                               214     199     -15
      signalfd_poll                                175     159     -16
      dequeue_signal                               340     323     -17
      do_getitimer                                 192     174     -18
      release_task.part                           1060    1040     -20
      ptrace_peek_siginfo                          408     387     -21
      posix_cpu_timer_set                          827     806     -21
      exit_signals                                 437     416     -21
      do_sigaction                                 541     520     -21
      do_setitimer                                 485     464     -21
      disassociate_ctty.part                       545     517     -28
      __x64_sys_rt_sigtimedwait                    721     679     -42
      __x64_sys_ptrace                            1319    1277     -42
      ptrace_request                              1828    1782     -46
      signalfd_read                                507     459     -48
      wait_consider_task                          2027    1971     -56
      do_coredump                                 3672    3616     -56
      copy_process.part                           6936    6871     -65
      
      Link: http://lkml.kernel.org/r/20190503192800.GA18004@avx2Signed-off-by: default avatarAlexey Dobriyan <adobriyan@gmail.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e2d9018e
    • Dmitry V. Levin's avatar
      selftests/ptrace: add a test case for PTRACE_GET_SYSCALL_INFO · ac76de55
      Dmitry V. Levin authored
      Check whether PTRACE_GET_SYSCALL_INFO semantics implemented in the
      kernel matches userspace expectations.
      
      [akpm@linux-foundation.org: coding-style fixes]
      Link: http://lkml.kernel.org/r/20190510152852.GG28558@altlinux.orgSigned-off-by: default avatarDmitry V. Levin <ldv@altlinux.org>
      Acked-by: default avatarShuah Khan <shuah@kernel.org>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Elvira Khabirova <lineprinter@altlinux.org>
      Cc: Eugene Syromyatnikov <esyr@redhat.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Greentime Hu <greentime@andestech.com>
      Cc: Helge Deller <deller@gmx.de>	[parisc]
      Cc: James E.J. Bottomley <jejb@parisc-linux.org>
      Cc: James Hogan <jhogan@kernel.org>
      Cc: kbuild test robot <lkp@intel.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Paul Burton <paul.burton@mips.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Richard Kuo <rkuo@codeaurora.org>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ac76de55
    • Elvira Khabirova's avatar
      ptrace: add PTRACE_GET_SYSCALL_INFO request · 201766a2
      Elvira Khabirova authored
      PTRACE_GET_SYSCALL_INFO is a generic ptrace API that lets ptracer obtain
      details of the syscall the tracee is blocked in.
      
      There are two reasons for a special syscall-related ptrace request.
      
      Firstly, with the current ptrace API there are cases when ptracer cannot
      retrieve necessary information about syscalls.  Some examples include:
      
       * The notorious int-0x80-from-64-bit-task issue. See [1] for details.
         In short, if a 64-bit task performs a syscall through int 0x80, its
         tracer has no reliable means to find out that the syscall was, in
         fact, a compat syscall, and misidentifies it.
      
       * Syscall-enter-stop and syscall-exit-stop look the same for the
         tracer. Common practice is to keep track of the sequence of
         ptrace-stops in order not to mix the two syscall-stops up. But it is
         not as simple as it looks; for example, strace had a (just recently
         fixed) long-standing bug where attaching strace to a tracee that is
         performing the execve system call led to the tracer identifying the
         following syscall-exit-stop as syscall-enter-stop, which messed up
         all the state tracking.
      
       * Since the introduction of commit 84d77d3f ("ptrace: Don't allow
         accessing an undumpable mm"), both PTRACE_PEEKDATA and
         process_vm_readv become unavailable when the process dumpable flag is
         cleared. On such architectures as ia64 this results in all syscall
         arguments being unavailable for the tracer.
      
      Secondly, ptracers also have to support a lot of arch-specific code for
      obtaining information about the tracee.  For some architectures, this
      requires a ptrace(PTRACE_PEEKUSER, ...) invocation for every syscall
      argument and return value.
      
      ptrace(2) man page:
      
      long ptrace(enum __ptrace_request request, pid_t pid,
                  void *addr, void *data);
      ...
      PTRACE_GET_SYSCALL_INFO
             Retrieve information about the syscall that caused the stop.
             The information is placed into the buffer pointed by "data"
             argument, which should be a pointer to a buffer of type
             "struct ptrace_syscall_info".
             The "addr" argument contains the size of the buffer pointed to
             by "data" argument (i.e., sizeof(struct ptrace_syscall_info)).
             The return value contains the number of bytes available
             to be written by the kernel.
             If the size of data to be written by the kernel exceeds the size
             specified by "addr" argument, the output is truncated.
      
      [ldv@altlinux.org: selftests/seccomp/seccomp_bpf: update for PTRACE_GET_SYSCALL_INFO]
        Link: http://lkml.kernel.org/r/20190708182904.GA12332@altlinux.org
      Link: http://lkml.kernel.org/r/20190510152842.GF28558@altlinux.orgSigned-off-by: default avatarElvira Khabirova <lineprinter@altlinux.org>
      Co-developed-by: default avatarDmitry V. Levin <ldv@altlinux.org>
      Signed-off-by: default avatarDmitry V. Levin <ldv@altlinux.org>
      Reviewed-by: default avatarOleg Nesterov <oleg@redhat.com>
      Reviewed-by: default avatarKees Cook <keescook@chromium.org>
      Reviewed-by: default avatarAndy Lutomirski <luto@kernel.org>
      Cc: Eugene Syromyatnikov <esyr@redhat.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Greentime Hu <greentime@andestech.com>
      Cc: Helge Deller <deller@gmx.de>	[parisc]
      Cc: James E.J. Bottomley <jejb@parisc-linux.org>
      Cc: James Hogan <jhogan@kernel.org>
      Cc: kbuild test robot <lkp@intel.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Paul Burton <paul.burton@mips.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Richard Kuo <rkuo@codeaurora.org>
      Cc: Shuah Khan <shuah@kernel.org>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      201766a2
    • Dmitry V. Levin's avatar
      powerpc: define syscall_get_error() · f296f1df
      Dmitry V. Levin authored
      syscall_get_error() is required to be implemented on this architecture in
      addition to already implemented syscall_get_nr(), syscall_get_arguments(),
      syscall_get_return_value(), and syscall_get_arch() functions in order to
      extend the generic ptrace API with PTRACE_GET_SYSCALL_INFO request.
      
      Link: http://lkml.kernel.org/r/20190510152824.GE28558@altlinux.orgSigned-off-by: default avatarDmitry V. Levin <ldv@altlinux.org>
      Acked-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Cc: Elvira Khabirova <lineprinter@altlinux.org>
      Cc: Eugene Syromyatnikov <esyr@redhat.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Greentime Hu <greentime@andestech.com>
      Cc: Helge Deller <deller@gmx.de>	[parisc]
      Cc: James E.J. Bottomley <jejb@parisc-linux.org>
      Cc: James Hogan <jhogan@kernel.org>
      Cc: kbuild test robot <lkp@intel.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Paul Burton <paul.burton@mips.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Richard Kuo <rkuo@codeaurora.org>
      Cc: Shuah Khan <shuah@kernel.org>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f296f1df
    • Dmitry V. Levin's avatar
      parisc: define syscall_get_error() · 2938c1f8
      Dmitry V. Levin authored
      syscall_get_error() is required to be implemented on all architectures in
      addition to already implemented syscall_get_nr(), syscall_get_arguments(),
      syscall_get_return_value(), and syscall_get_arch() functions in order to
      extend the generic ptrace API with PTRACE_GET_SYSCALL_INFO request.
      
      Link: http://lkml.kernel.org/r/20190510152812.GD28558@altlinux.orgSigned-off-by: default avatarDmitry V. Levin <ldv@altlinux.org>
      Acked-by: Helge Deller <deller@gmx.de>	[parisc]
      Cc: James E.J. Bottomley <jejb@parisc-linux.org>
      Cc: Elvira Khabirova <lineprinter@altlinux.org>
      Cc: Eugene Syromyatnikov <esyr@redhat.com>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Greentime Hu <greentime@andestech.com>
      Cc: James Hogan <jhogan@kernel.org>
      Cc: kbuild test robot <lkp@intel.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Paul Burton <paul.burton@mips.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Richard Kuo <rkuo@codeaurora.org>
      Cc: Shuah Khan <shuah@kernel.org>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2938c1f8
    • Dmitry V. Levin's avatar
      mips: define syscall_get_error() · ba849160
      Dmitry V. Levin authored
      syscall_get_error() is required to be implemented on all architectures
      in addition to already implemented syscall_get_nr(),
      syscall_get_arguments(), syscall_get_return_value(), and
      syscall_get_arch() functions in order to extend the generic ptrace API
      with PTRACE_GET_SYSCALL_INFO request.
      
      Link: http://lkml.kernel.org/r/20190510152803.GC28558@altlinux.orgSigned-off-by: default avatarDmitry V. Levin <ldv@altlinux.org>
      Acked-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: Elvira Khabirova <lineprinter@altlinux.org>
      Cc: Eugene Syromyatnikov <esyr@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: James Hogan <jhogan@kernel.org>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Greentime Hu <greentime@andestech.com>
      Cc: Helge Deller <deller@gmx.de>	[parisc]
      Cc: James E.J. Bottomley <jejb@parisc-linux.org>
      Cc: kbuild test robot <lkp@intel.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Richard Kuo <rkuo@codeaurora.org>
      Cc: Shuah Khan <shuah@kernel.org>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ba849160
    • Dmitry V. Levin's avatar
      hexagon: define syscall_get_error() and syscall_get_return_value() · 6c132dd6
      Dmitry V. Levin authored
      syscall_get_* functions are required to be implemented on all
      architectures in order to extend the generic ptrace API with
      PTRACE_GET_SYSCALL_INFO request.
      
      This adds remaining 2 syscall_get_* functions as documented in
      asm-generic/syscall.h: syscall_get_error and syscall_get_return_value.
      
      Link: http://lkml.kernel.org/r/20190510152756.GB28558@altlinux.orgSigned-off-by: default avatarDmitry V. Levin <ldv@altlinux.org>
      Cc: Richard Kuo <rkuo@codeaurora.org>
      Cc: Elvira Khabirova <lineprinter@altlinux.org>
      Cc: Eugene Syromyatnikov <esyr@redhat.com>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Greentime Hu <greentime@andestech.com>
      Cc: Helge Deller <deller@gmx.de>	[parisc]
      Cc: James E.J. Bottomley <jejb@parisc-linux.org>
      Cc: James Hogan <jhogan@kernel.org>
      Cc: kbuild test robot <lkp@intel.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Paul Burton <paul.burton@mips.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Shuah Khan <shuah@kernel.org>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6c132dd6